General Specifications

Transcription

1 General pecifications YFGW410 Field Wireless Management tation G 01W02D01-01EN GENERAL This General pecification(g) describes the hardware specifications for Field Wireless Management tation and specifications of built-in software. This product is based on wireless communications standard IA100.11a for industrial automation of International ociety of Automation (IA). This product has system manager/security manager/gateway function based on IA100.11a, and combining this with Field Wireless Access Point(YFGW510) and/or Field Wireless Media Converter(YFGW610) composes the field wireless system. For outline of a field wireless system, and details of each product, see each related products General pecifications. FEATURE High Reliability and Flexibility Adoption of a discrete-type architecture enables a redundancy configuration by Connection of these two products. A highly flexible operation is also possible where the field wireless system under operation does not have to be stopped and maintenance can be performed on line. High-ecurity etting This product can perform the configuration of an access control such as information-provider light filter of a Connection place communication interface, and a the-port light filter. Malicious access is prevented by controlling the connection point. Malicious access is prevented by controlling the connection point. Duocast (IA100.11a tandard) This product has a Duocast function of IA100.11a standard. Reliability of the field wireless communication can be enhanced through receiving data simultaneously with two YFGW510s connected to this product. Wireless Data Cache This product can cache the data acquired through communication with the field wireless device in the product s internal memory. The efficient communication to wireless field devices can use a wireless band flexibly. Yokogawa Electric Corporation , Nakacho, Musashino-shi, Tokyo, Japan Tel.: Fax.: G 01W02D01-01EN 1st Edition July 2012 (KP) 2nd Edition Feb (KP)

2 2 HARDWARE PECIFICATION Interface Interface Protocol Item Field Network pecifications Field Wireless Backbone pecifications Maintenance/Diagnostic Network pecifications tandard 100BAE-TX *2 R BAE-TX *2 100BAE-TX *4 *4 *5 R-232C Transmission 100Mbps 38.4Kbps 100Mbps 100Mbps 115.2kbps peed Connector RJ-45 Proprietary RJ-45 RJ-45 RJ-11 Cable Type Category 5 AWG24~12 Category 5 Category 5 Proprietary Maximum 100m 1200m 100m 100m 15m Length Number of 3 ports 1 port 4 ports 1 port 1 port Ports Port Name F1, F2, F3 B1, B2, B3, B4 M1 Protection urge Isolated, urge urge Modbus Modbus/TCP Modbus/RTU OPC *1 Proprietary *3 Management, configuration, etc. HTTP NTP/NTP Proprietary *3 HTTP IEEE1588PTP v2 Proprietary *3 HTTP Proprietary *3 *1: OPC interface connection is available by Field Wireless Device OPC erver (7100). For details of this product, see related products General pecifications. *2: In outdoor wiring to Field Network or 100BAE-TX of Field Wireless Backbone, use optical fiber cables with a nonmetallic tension member, combining with YFGW610. *3: TCP based custom protocol used for communication between this product, Field Wireless OPC erver, FieldMate Versatile Device Management Wizard, Plant Resource Manager (PRM), and YFGW510. For details of each product, see related products General pecifications. *4: Maintenance/Diagnostic Network (100BAE-TX, R-232C) are not available for outdoor wiring. *5: These are the serial ports for a maintenance which only our company use. Performance Field Wireless ubnet: Max 20 subnets are connectable Max 20 YFGW510 are connectable *1 *1: Max 8 YFGW510 are connectable in one field wireless subnet. Field Wireless Device: Update rate Network size 1 second Max 200 devices *1 5 seconds Max 500 devices *2 *1: Max 20 devices in one field wireless subnet *2: Max 100 devices in one field wireless subnet Upper Interface: Protocol Modbus/TCP *1 Modbus/RTU *1 OPC *2 Maximum connection 8 clients 1 client 1 system Access Requests of Upper Interface: 100BAE-TX : Max 240 times per second *1 R-485 : Max 10 times per second *1: um of access requests of field network interface. Redundancy Architecture: Hot standby redundancy system witching Time for Redundancy: 1 second (After detection of failure or receiving of switching request) Update Rate of Field Wireless Device: User electable 0.5 to 3600 seconds. Diagnosis Functions: CPU failures, communication interface malfunctions, out of range, abnormal settings. oftware Download Function: The product s internal software, and YFGW510 s internal software, and software within the field wireless device (communication firmware and sensor firmware) can be updated. *1: The amount of data that can be accessed at one time depends on the modbus client. *2: OPC interface connection is available by Field Wireless OPC erver (7100). G 01W02D01-01EN Feb. 25,

3 Installation Environment Temperature Range: Operating: -40 to +65 C (altitude : up to 2000m) -40 to +55 C (altitude : more than 2000m, up to 3000m) torage: -40 to +85 C Humidity Range: Operating: 5 to 95 %RH (non-condensation) torage: 5 to 95 %RH (non-condensation) Temperature Gradient: Operating: ±10 C/h or less torage: ±20 C/h or less Power upply: Voltage Range : 10.8~26.4 V DC Rated Power upply : 24 V DC Momentary Power Failure : Instant Disconnection DC Power upply Ripple Ratio : 1%p-p or less Power Consumption: Max. 10 W Degrees of Protection: IP20 Vibration Resistance: 0.15 mm P-P (5~58 Hz), 1 G (58~150 Hz) hock Resistance: 15 G 11 ms Noise Resistance: Electric Field : 3 V/m or less (80MHz~1GHz) Electrostatic Discharges: 4 kv or less (contact discharge), 8 kv or less (aerial discharge) Grounding: Class-D grounding (no sharing ground with others) Cooling: Natural Air Cooling Regulatory Compliance tatements EMC Conformity tandards: EN Class A, Table 2 (for use in industrial locations), EN55011 Class A group1, EN afety Requirements: EN , CA C22.2 No Indoor use only Explosion-Proof Types: FM, ATEX, CA, IECEx (approvals under pending) Physical pecifications Housing Material: Aluminum alloy plate with polyester, mint-green paint (Munsell 5.6BG 3.3/2.9 or its equivalent) External Dimension: 150 x 60 x 140 mm (not include projection) Weight: Approx. 1.0 kg Mounting: DIN RAIL Mounting OFTWARE PECIFICATION Field Wireless Management Console This software is used loading into PC connected to this product. Installing this software into PC is not available. Configurator: The software deals with a field wireless network configuration and support. Monitor: The software can perform the management and the operation status check in field wireless network and a field wireless device. pecifications and ystem Requirements oftware License: Field Wireless Management Console: 1 license Configurator: 1 client Monitor: 3 clients Language: oftware (GUI): English Manual: Japanese or English Hardware Operating Environment *1 : Item Processor Memory Hard Disk Display Device Recommended ystem Requirements Intel Core 2 Duo 2.66GHz or more 2GB or more 40GB or more (Minimum free space 15GB or more) 1280 x 800 High color, 32-bit Ethernet Network Card *1: Field Wireless Configurator and Management Tool attached with Field Wireless Integrated gateway(yfgw710) can be used in one PC. For details of this product, see related products General pecifications. oftware Operating Environment *1,*2,*3 : O Kind Windows7 Professional ervice Pack 1 32/64bit Windows Vista Business Edition ervice Pack 2 32bit Windows erver 2008 Enterprise ervice Pack 2 32bit Windows erver 2008 R2 Enterprise 32/64bit *1: Japanese version and English version are supported. *2: Microsoft.NET Framework 3.5 ervice Pack 1 is required. *3: For 64bit O, WOW64 (Windows 32-bit On Windows 64-bit) can be performed. Configuration Tool for Field Wireless Devices FieldMate is required to configure the wireless field device parameters. Use R or later version for configuration via IA100.11a wireless communication, or R or later version for configuration via infrared communication. For details, see FieldMate Versatile Device Management Wizard. 3 G 01W02D01-01EN July 10,

4 4 MODEL AND UFFIX CODE Model uffix Code Descriptions YFGW410 Field Wireless Management tation General pecifications Output signal -A Always A License -B ingle License (10 devices connectable) *1 -C ingle License (100 devices connectable) *2 - ingle License (500 devices connectable) -R Redundant License (500 devices connectable) Manual Language 0 Japanese 1 English oftware Media 0 Provided with DVD-ROM 1 None Mounting Bracket D DIN RAIL Mounting ync Connector Termination 0 With Terminator *3 1 With Cable for Redundancy *4 --- A Always A --- A Always A Option Codes / Optional pecifications *1: One YFGW510 and one field wireless subnet are connectable. *2: Two YFGW510s and one field wireless subnet are connectable. *3: In case of single behavior, terminate the ync Connector by the terminator. *4: In case of redundant behavior, connect the cable for Redundancy between two YFGW410s. OPTIONAL PECIFICATION (For Explosion Protected Types) Item pecification Code Factory Mutual (FM) Nonincendive Approval *1 ATEX Type n Declaration *2 Canadian tandards Association (CA) Nonincendive Approval *1 IECEx Type n Approval *2 *1: To be compliant with these standards, the YFGW410 hardware needs to be installed in a lockable metal cabinet. *2: To be compliant with these standards, the YFGW410 hardware needs to be installed in a lockable metal cabinet of IP54 or higher protection rating. G 01W02D01-01EN Feb. 25,

5 5 APPEARANCE Front view Right side R-485 connector tatus injector LED Reset switch hutdown switch Maintenance interface erial port Field network interface 1 Power supply connector ynchronization connector backbone interface 1 backbone interface 2 Ground terminal Name plate DIN rail mounting bracket Field network interface 2 Field network interface 3 backbone interface 3 backbone interface 4 F01.ai F02.ai TERMINAL CONFIGURATION Power supply Terminal ignal NC No Connection + 24 V DC Hot 24 V DC Neutral Frame Ground F03.ai R-485 F04.ai Terminal ignal (4-wire) ignal (2-wire) TX + Transmit Data positive Transmit/Receive Data positive TX - Transmit Data negative Transmit/Receive Data negative RX + Receive Data positive ame as TX + RX - Receive Data negative ame as TX - G ignal Ground ignal Ground Frame Ground Frame Ground G 01W02D01-01EN July 10,

6 6 EXTERNAL DIMENION Unit : mm TX RX NC G M1 F1 F2 B1 B2 B DIN rail mounting center F3 B F05.ai NOTE FOR OPERATION The check process of wireless communication, the operating environment of the system, deterioration of wireless quality, and communication path error and restoration may cause data loss, retransmission of the same data, or variations in the data update time. G 01W02D01-01EN July 10,

7 7 ORDERING INFORMATION pecify the following when ordering 1. Model, suffix codes, and option codes 2. Tag Number (if required) pecify Tag number (up to 16 letters) to be engraved on the name plate. RELATED PRODUCT GENERAL PECIFICATION Field Wireless ystem Overview: Refer to G 01W01A01-01EN Field Wireless Access Point YFGW510: Refer to G 01W02E01-01EN Field Wireless Media Converter YFGW610: Refer to G 01W02D02-01EN Field Wireless Integrated Gateway YFGW710: Refer to G 01W01F01-01EN Field Wireless OPC server 7100: Refer to G 33M E FieldMate Versatile Device Management Wizard: Refer to G 01R01A01-01E Plant Resource Manager (PRM) : Refer to G 33Y05Q10-32E TRADEMARK All brand or product names of Yokogawa Electric Corporation in this document are trademarks or registered trademarks of Yokogawa Electric Corporation. All other company brand or product names in this document are trademarks or registered trademarks of their respective holders. ubject to change without notice. G 01W02D01-01EN July 10,