Wireless LAN Series. Wireless LAN Adapter. Wireless LAN Access Point. Introduction POS & Inventory system Inventory Control POS

Transcription

1 Wireless LAN Series Wireless LAN Adapter The wireless adapters plug into the mobile devices and let these devices connect to the Internet. By using these adapters, users can create infrastructures or ad-hoc networks. Advantech provides PCMCIA, PCI, USB and PC/104 interfaces to satisfy your needs. Wireless LAN Access Point The wireless access point performs as a transparent bridge between wired and the wireless networks. By connecting the access point to your hub, you can access the Internet via wireless LAN adapter. For different applications, Advantech provide four types of access points. The WLAN-9100 is a lean, cost-effective 11 Mbps wireless bridge. You can use it to connect many wireless adapters. The is a powerful access point with router, bridge and repeater functions. It performs as a wireless router to connect the network from building to building. The is a 2 Mbps access point with repeater, station adapter and micro access point functions. It can extend the transmission distance automatically. In addition, it performs as an adapter. Flexibility and Mobility Advantech Wireless LAN series is a perfect solution for providing connectivity to your most difficult locations. It allows you to scale your network creatively, without being confined to cable reach. The wireless connection also provides ultimate flexibility to reconfigure your network without incurring additional cabling costs. The WLAN series products are fully compatible with the IEEE b, high rate wireless LAN standard. They deliver 11 Mbps over-the-air for faster downloads, easier browsing, quicker file transfers and support for more wireless users. Utilizing Direct Sequence Spread Spectrum (DSSS) technology in the 2.4 GHz unlicensed band, mobile users can connect to the corporate network wherever their work takes them. The Advantech WLAN series now offers two different categories: adapter and access point. The WLAN series not only augments infrastructure network or create an Ad-hoc network, but also offer additional flexibility and unparalleled mobility to your network. You can build up the network according to your application. Keep Your Communications Private The WLAN series guards your wireless network from being tapped by multiple security protection. (WEP40 encryption, MAC access control and password security). By using WEP40 encryption, you can select a WEP key to secure your data from being viewed by an unauthorized wireless user. Only the access point and wireless adapter have the same WEP key. MAC access control allows you to have a list to control accessibility to any wireless adapter. The multiple security mechanisms work to prevent unauthorized access to both wired and wireless network resources. POS & Inventory system Inventory Control POS Warehouse DataBase Data Center 7-10 WLAN-9100

2 Wireless LAN Series Manage Your Network Effortlessly All WLAN series products come with straightforward configuration and management tools. The WLAN series includes management software which allows you to configure access points wirelessly, through the Web, Telnet, RS-232, utility management. Or use your standard SNMP management package to configure remotely instead of going on-site. Configuration Utility Adapter Seamless Roaming With the WLAN series adapter installed in a laptop, instant network access is available whether in the boardroom, a conference room or even while walking around. The WLAN series allows you to take your corporate network with you. Keep Pace with Today s Applications Self-diagnostic utility The WLAN adapter configuration utility provides three diagnostic tools: Site Survey, Link Quality Test, Access Point Browser. This will help you diagnose the wireless LAN enviroment before operating. For Site Survey function, users can inspect wireless channel quality in the current environment. For Link Quality Test function, users can test point-topoint communication quality. For Access Point Browser function, it will display all active access points in your site. Supports all popular network operating systems The WLAN series supports Window 95/98/NT/2000, Linux, Netware client, DOS, standard software & hardware interfaces and network protocols, enabling them to be easily integrated into the existing network and Internet infrastructure. Supports various interfaces & applications Because of flexibility and high mobility, the WLAN now has been the best network solution. Therefore, Advantech provides various communication interfaces and access point to meet their needs. Configuration Utility Access Point Industrial Communication 7 System Architecture

3 WLAN Mbps Wireless LAN Access Point NEW Features Features 11Mbps data rate by incorporating Direct Sequence Spread Spectrum technology. Fully IEEE b compatible. Allows inter-operation among multiple vendors. Technique operating in the unlicensed 2.4Ghz ISM band. Seamless roaming within the & b wireless LAN infrastructure. Provides user authentication to enforce tight security. Supports WEP & MAC address control. Highly efficient antenna provides a range of operation up to 800 feet in free space. Provides Windows-based Diagnostic, Statistics Tools and Traffic Monitor. The WLAN-9100 performs as a fast and cost-effective bridge between wired and wireless local area network. It provides users with the advantage of easy-to-extend networking and mobility. Fully compliant with the IEEE (b), 11Mbps Wireless LAN standard, the WLAN features many powerful functions such as: high-security WEP40 protection, self-diagnostic configuration utility, Web management, SNMP and more. Thus, the WLAN-9100 sespecially suitable for difficult-towire environments and mobile workers. Placed anywhere along an Ethernet LAN, the WLAN-9100 allows wireless stations to transparently access the corporate network. The numerous wireless LAN devices can connect to one WLAN-9100 without limitation. By detecting WLAN-9100 automatically, wireless LAN devices can roam different areas as long as they are the same settings. In addition, the WLAN-9100 also provides WEP40 standard and MAC Access Control to protect transmission security. This makes it suitable for high-security networking. We also provide four convenient methods to configure the WLAN-9100: Web management, telnet, configuration utility, RS-232. You can configure it remotely via Internet. For further transmission security, the WLAN-9100 adapts MAC access control capalsilities to limit the specific wireless LAN devices joining the network. Specifications Modulation: Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) Speed Option: Data rate selection (11, 5.5, 2 and 1 Mbps per channel), also support auto rate selection Range Coverage: Maximum 800 feet (open space) Antenna: Integrated with various high-gain antenna. Sensitivity: -83 dbm (at 1E-5 BER) Power Supply: 12 V DC (AC power supply included) RF Output Power: 13 dbm 7-12 FCC ETSI Bridge Function: Transparent bridging between Ethernet, airwaves RF access protocol: CSMA/CA+ACK (per IEEE specification) Protocol: CSMA/CA+ACK (per IEEE specification) Roaming: IEEE802.11b MAC Function supported Operation Frequency/Operation Channels: 2.412~2.462 GHz (N.America)/11 Channels 2.412~2.472 GHz (Japan TELEC)/14 Channels 2.412~2.472 GHz (Europe ETS)/13 Channels Configuration: Windows-based Utility, SNMP, RS-232/Telnet, Web Ethernet Connector/Physical Interface: 10/100 base-t(rj-45) Serial Port: RS-232 (configuration port) Operating Temperature: 0~70 C Storage Temperature: -20~80 C Humidity (non-condensing): 5~80% Dimension: 184 mml x 142 mmw x 50 mmh LED indicators: Power, AP, Wireless Activity, Ethernet Activity, Connection Power comsumption: Tx: ma Rx: ma Ordering Information WLAN-9100A/WLAN-9100E/WLAN-9100J 11 Mbps Wireless LAN Access Point for US/European/Japan standard ANT-2010 Directional antenna, 18 dbi, 50 W ANT-2011 Directional antenna, 13.9 dbi, 50 W ANT-2012 Non-directional antenna, 3 dbi, 50 W ANT-2013 Non-directional antenna, 0 dbi, 2 W ANT-2014 Non-directional antenna, w/mmcx connector 0 dbi, 10 W Connect cm MMCX-SMA connector

4 11 Mbps Wireless LAN Router 2 Mbps Wireless LAN Access Point Features: The is a fast and powerful wireless router. Fully compliant with the IEEE b, 11Mbps Wireless LAN standard, the WLAN9300 provides three functions: Router, Access Point and Repeater. Without additional cost for constructing/renting wired network, you can use to connect LANs within buildings via wireless. Thus, it makes especially suitable for outdoor use. The is a powerful and cost-effective wireless access point. It provides three functions: Access Point, Repeater, Station Adapter. The can fulfill all your wireless requirements. And you do not pay additional cost for different Access Point as your environment changes. Thus, it is especially suitable for multitasking environments. The /9450 consists of the same functions as other Access Points. But they provide more than those. For Router function, WLAN9300 can connect many wired LANs via wireless. For Access Point function, it bridges wireless adapters to wired networks. For Station Adapter function, the turns your wired workstation into a wireless workstation. No software is required on PC. No more installation hassles or drivers to install. It can be used on MAC or non-pc and turn it wireless in no time. For Repeater function, the forwards all messages to another automatically or directly to an Access Repeater without wiring to your network backbone. It is a perfect solution for roaming to a wider range in an Ethernet environment. Specification: Supports 3-in-1 functions: Access Point, Station Adapter, Repeater Supports Ad-hoc, wireless modem and Infrastructure networks Protocol-independent networking functionality Supports all operating systems (Station Adapter function) Expand wireless coverage (Repeater function) Visible: 6 LED - MGMT, WLINK, WTX/WRX, 10/100M, LINK/ACT, FDX/COL, BUSY, POWER Emission & Safety: CE, FCC Class A Data Rate: 1 Mbps & 2 Mbps per channel Consumption: Transmit 5 V 500 ma/receive, 5 V 300 ma/power Save Mode, 5 V 50 ma Type: Supports ad-hoc, infrastructure communicative to Wired Networks via Access Point and Repeater Operating Channels: 11 N. America, 14 Japan, 13 Europe (ETSI) Sensitivity: -88 dbm (at 10E-5 BER) Systems Supported: All OSs which support wired LAN card Roaming: 800 feet between access points LED indicators: Power on/wired/wireless/rs-232 Activity/Link Operating Frequency: (N. America) (Europe ETSI) (Japan) Output Power: 50 mw Maximum or 17+/-3 dbm Voltage: 12 V Operating Temp: 0 ~ 60 C Humidity: 5% ~ 90% Size: 17 cm (L) x 12.5 cm (W) x 3 cm (H) Ordering Information Network Interfaces: Support both Ethernet and IEEE 802.3/ 802.3u (10/ 100BASE-TX) Serial port: DB9 RS-232, RJ-45 Power Supply: VAC, Hz Operating Temperature: 0 C ~55 C, 5%~95% Humidity (non condensing) Maximum Output Power: 4.5 Watts (Max) Dimension(Max): 205 mm x 158 mm x 33.5 mm Sensitivity: -83 dbm Output Power: 13 dbm FCC ETSI A/E/J 11 Mbps Wireless LAN Router for US/European/Japan standard A/E/J 2 Mbps Wireless LAN Access Point for US/European/Japan standard ANT-2010 Directional antenna, 18 dbi, 50 W ANT-2011 Directional antenna, 13.9 dbi, 50 W ANT-2012 Non-directional antenna, 3 dbi, 50 W Connect-3011 ( only) 30 cm SMA-N type connector WLAN-9100 W E N Industrial Communication Supports Wireless Router, Access Point & Repeater function. 1 RS-232 port for configuration and 1 10/100Mnps LAN port for other connection. Supports IP tunneling & Router function. Supports WatchDog, BOOTP, DHCP. Support SmartMedi 3.3V 32Mbytes. Automatic Version Upgrade.

5 B WLAN Mbps Wireless LAN PCMCIA Adapter (Antenna Detachable) 11 Mbps Wireless LAN PCMCIA Adapter (Antenna Integrated) 11 Mbps Wireless LAN PCI Reader NEW Features: Supports PCMCIA type II standard (/9030B) Supports PCI v2.1 standard (WLAN-9060) Supports 1, 2, 5.5 and 11 Mbps data rate. Supports Ad-hoc, peer-to-peer, infrastructure network Wireless connection without the cost of cabling. Supports Windows 95/98/NT/2000, Linux drivers. Provides windows configuration utility: easy to self-diagnose WLAN-9060 The is a 11Mbps wireless LAN PCMCIA adapter which fits into PCMCIA Type II slot. It delivers an optimal combination of range, throughput, low power consumption and interference immunity. Fully compliant with the IEEE (b), 11Mbps Wireless LAN standard, the features lots of powerful functions such as: various network support, high-security WEP40 protection, self-diagnostic configuration utility, Web management, SNMP and more. It s the perfect solution for laptop PC users and all other portable devices with standard Type II PCMCIA slots. The WLAN-9060 is a 11Mbps Wireless LAN PCI adapter which is compliant with PCI v2.2 standard. It offers Plug & Play installation, and fits the most common bus on today s desktop PCs. Once installed, this connection allows your computer to immediately become a wireless extension of the existing wired network. Being able to take your laptop or handheld anywhere in your workplace, the /9060 connects to various networks to meet your requirements: Ad-hoc, peer-to-peer, infrastructure. It s more convenient and flexible for users to build up their networks. The /9060 also provides seamless roaming in your enterprise or factory environments. You can roam to the different places and still can connect to the network via Access Point. To offer additional flexibility and mobility for users. Besides, the WLAN adapter configuration utility provides three diagnostic tools: Site Survey, Link Quality Test, Access Point Browser. For Site Survey function, users can inspect wireless channel quality for current environment. For Link Quality Test function, users can test point-topoint communication quality. For Access Point Browser function, it will display all active Access Points in your site. Specification: Compatibility: PCMCIA Type II (/9030B) PCI V2.1 (WLAN-9060) Antenna: Detachable assorted antenna or Built-in assorted antenna Range: 800 feet in open space 7-14 FCC ETSI Data Rate: 11, 5.5, 2 adnd 1 Mbps per channel Power Consumpion: Tx 3.3 V, 400 ma (max) Rx 3.3 V, 200 ma (max) Output Power: 13 dbm Voltage: 3.3 V & 5 V DC Network Architecture Types: Supports ad-hoc and infrastructure, roaming (standard IEEE802 11b compliant) Sensitivity: -83 dbm (at 1E-5 BER) Modulation : CCK (11 Mbps, 5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) Support OS: Windows 95/98/2000/NT/CE, Linux, FreeBSD Simultaneous Channels Support: 11 channels N. America (2.412 GHz ~ GHz) 14 channels Japan/TELEC (2.412 GHz ~ GHz) 13 channels Europe/ETSI (2.412 GHz ~ GHz) LED Indicators: Link/Power Working Temperature: 0 ~ 70 C Storage Temperature: -20 ~ 80 C Hemidity (non-condensing): 5 ~ 80 C Ordering Information A/E/J 11 Mbps Wireless LAN PCMCIA Adapter for US/European/Japan standard (Antenna Detachable) BA/BE/BJ 11 Mbps Wireless LAN PCMCIA Adapter for US/European/Japan standard (Antenna Integrated) WLAN Mbps Wireless LAN PCI reader, W/O ANT-2013 Non-directional antenna, 0 dbi, 2 W ANT-2014 Non-directional antenna, w/mmcx connector 0 dbi, 10 W Connect cm MMCX-SMA type connector

6 WLAN-9070 WALN Mbps Wireless LAN USB Reader 2Mbps Wireless LAN PC/104 Adapter NEW WLAN-9070 The WLAN-9070 is a 11Mbps Wireless LAN USB Interface adapter. It is compatible with USB v1.0 standards with full speed mode at 12 Mbps. By connecting to PC, the WLAN-9070 lets your computer connect to the Internet immediately. You never need to open the chassis or power down your PC. With a modula design, the WLAN-9070 has a built-in and offers many functions like the. In addition, the WLAN-9070 also provides superior functions such as no power adapter reauirewent, active LED indicators, and more. The WLAN-9440 is a 2 Mbps Wireless LAN PC/104 Interface adapter. It works with PC/104 CPU modules and upgrades your embedded system into a wireless network. Being able to take your laptop or handheld anywhere in your workplace, the WLAN-9070/9440 connects various networks to meet your requirements: Ad-hoc, peer-to-peer, infrastructure. It s more convenient and flexible for users to build up their networks. The WLAN-9070/9440 also provides seamless roaming in your wireless environments such as POS system, factory etc. Specifications WLAN-9070 Host computer: PC Pentium II CPU USB port Windows 95 OSR2 (USB Supplement) Windows 98, Windows 98 2nd Edition Socket: 1x PC I/O Card, Type II socket Interface: External USB device Power supply: 5 V DC directly from USB port Power Consumption: Idle - 50 ma (typ.) Busy - 85 ma (typ.) Data Transfer Rate: 12 Mbps (max.) FCC ETSI WLAN-9440 Features Supports USB specification V1.0 full speed mode at 12 Mbps (WLAN-9070) No power adapter resuired (WLAN-9070) Active LED indication of power and read / write operation (WLAN-9070) Supports type-ii PC I/O Card Supports Windows 95 OSR2 (with USB Supplement), Windows 98 or Windows 98 2nd Edition. Supports Windows 98/ME/2000 Environmental Information : a. Temperature: Operating temperature: 0 C ~ 70 C Storage temperature: -40 C ~ 70 C b. Relative humidity: Operating RH: 50% (Max. without condensing) Storage RH: 95% (Max. without condensing) Dimensions: Housing: W 85 x H 26 x D 126 mm (W x H x D) Cable: L 1000 mm leugth Weight: 151 g (approx.) Safety Standards: FCC Class B, CE Compliance WLAN-9440 Bus Interface: ISA Data rate: 2 Mbps Media Access Protocol: CSMA/CA Number of Channels: 12 Range: 800 feet RF Output Power: 50 mw Driver: ODI, NDIS, Packet Driver Approval: FCC, CE, ETS Dimension(mm) : ISA adapter: 161 L 123 W PCMCIA adapter: 168 L 58 W Ordering Information: WLAN Mbps Wireless LAN USB reader, w/o WLAN-9440A/WLAN-9440E/WLAN-9440J 2Mbps Wireless LAN PC/104 Adapter for U.S/European/Japan ANT cm, non-directional antenna w/sma connector, 0 dbi, 2 W Industrial Communication 7