ICS-256 Pro

Transcription

1 Bluetooth-IrDA Multi-Slot Kiosk Reader ICS-256 Pro ICS-256 S Pro

2 Overview: The ICS-256 Pro/ ICS-256 S Pro (in the following named as ICS-256 Pro) multi Slot and multi function device allows to transfer files from Flash Memory Cards, Microdrives, USB Memory Sticks and from wireless connected devices (e.g. mobile phones) to the PC. This will be achieved by the five slot media reader, the Infra-Red & Bluetooth receivers and the front USB port. The innovative changeable PinProtection reduces the cost of service and repair and also the down times in case of damaged pins because this module may be changed by any person who administrates a Digital Photo Kiosk. UL, FCC and CE certified. The following standards are supported: Memory Card Reader : Compact Flash Card, Type I & II (with embedded Pin protection) IBM / Hitachi MicroDrive (via Compact Flash slot Type II) Smart Media Card (push-push connector) xd-picture Card (push-push connector) SD Secure Digital Memory Card (push-push connector) MMC Multimedia Memory Card (push-push connector) MS Memory Stick and Memory Stick Pro (push-push connector) MS Memory Stick Duo, Duo Pro (no adapter needed, p-push connector) Wireless Connection : Infra Red (IrDA) Bluetooth (BT) Front USB Connector : Type A USB Memory Stick USB 2.0 & USB 1.1 SmartCard Reader (only ICS-256 S Pro) : Support for ISO 7816 Class A/AB SmartCards, T=0, T=1 Protocol

3 In total there are five to six active USB devices build into the ICS-256 Pro 4 Slot Card Reader (CF/Microdrive, SMM, MS, SD/MMC, ) xd-picture Card Reader IRDA Bluetooth Front USB 2.0 Connector SmartCard Reader (only ICS-256 S Pro) To minimize the demand for free USB Ports on the PC motherboard to connect all the devices by an own USB Port, a seven Port USB 2.0 HUB is integrated in the ICS-256 Pro. Therefore the ICS-256 Pro will be connected to the PC via one USB port only. Details: Chassis : Standard 5.25 Insertion Bay (145,70mm x 42,05mm x 150 mm ) Electrical Connections to the PC : USB Type B upstream connector 4 wire Power connector USB Specification : The ICS-256 Pro is an USB 2.0 device

4 Changeable PinProtection : The innovative PinProtection, which is changeable in case of damaged CF pins gives a great advantage in service because this module may be changed by any person who administrates a Digital Photo Kiosk. The PinProtection-module will be available as spare part

5 Mainboard : There are two active devices soldered on the PC: Media Controller PL-2535, USB 2.0 Flash controls the CF/SMM/SD-MMC/MS Slots upd720113, 7-Port High Speed USB Hub Controller (USB 2.0) connects the Flash Media Controller and the six Type A USB onboard connectors to the PC. Other USB Components : To realize the wireless connection via IRDA, Bluetooth and the x-d Memory Card Reader, three different USB devices are in use: IrDA, Infra Read Receiver/Transmitter USB IrDA Adapter, fully compatible to IrDA 1.1 and USB 1.1 specification Support SIR (up to 115kbps) and FIR (4Mbps) Data Transfer rate Backward compatible to MIR and 56Kpbs ASK USB Bluetooth Adapter Bluetooth V1.1 compliant USB UHCI/OHCI spec 1.1 compliant 4dBm Class 2,30 meter working distance Frequency band: 2.4GHz~2.4835GHz unlicensed ISM band Modulation: GFSK Piconet: Supports 7 slaves Link mode: ACL and SCO Data rate: 723 kbps ACL; 64 b/s SC Sensitivity: -80dbm@0.1% BER Olympus MAUSB-300 LAB USB 2.0 xd-picture Card Reader SmartCard Reader (only ICS-256 S Pro) USB 1.1, Full Speed, Bus powered device. Support for ISO 7816 Class A/AB SmartCard, T=0, T=1 Protocol Support

6 IrDA and Bluetooth USB devices : Olympus MAUSB-300 xd-picture Card reader USB device :

7 Cable : Optional cable for ICS-256 Pro : 5pin to USB-B plug, length 680 mm Part numbers: ICS-256 Pro ICS-256 S Pro changeable PinProtection incl. minibezel pin to USB pug cable SCM PC-Card GmbH Sperl-Ring 4 D Pfaffenhofen All Trademarks and logos are property of their respective owners. by SCM PC-Card GmbH 2oo6