MCT-100 Series Media Converter

Transcription

1 Innovation to Your Needs Series Media Converter Fast Ethernet 10/100Base-TX to 100Base-FX Features 9K Bytes Jumbo Frame Size Support Jumbo Frame size 9K bytes to ease the network traffic loading and facilitate IPTV service Fully Compatible with MCT-RACK-18 Series Space-saving and budget-limited solution for MCT-RACK18 series to mix installation with MCT series converter. Link Alarm When UTP or fiber port is down during operation, the other port will be automatically turned off to alert the user Description Connection Technology Systems (CTS) series media converter are the Fast Ethernet 10/100Base-T to 100Base-X media converter. The series media converter converts traditional twisted-pair RJ-45 cable into various fiber media including multi-mode, single-mode, SC/ST/MR connector, or bi-directional wdm, extending transmission distance for the deployment to the household, apartment or campus. series media converter is fully compliant with IEEE 802.3, 802.3u standards. Besides, it is equipped with some switching features including store and forward. With the built-in switch ASIC chip, it has turned series to become more like a two-port switch rather than like an ordinary converter. User can get many switch benefits such as segmentation, frame checking and error filtering. Additionally, Link Alarm feature enables administrator to monitor the fiber link more easily. Target Application FTTX implementations. Point-to-point fiber connection for long distance. DS-C043 A01 The installation and operation are simple and straightforward. The operation status can be monitored through a set of diagnostic LED indicators on the front panel. It is especially designed for network operators, metro Ethernet providers, enterprises, SMB, who have the need of implementing fiber optical Ethernet networks over long distance, for FTTX solutions, and are looking for an effortless and reliable 100Mbps media converter.

2 Application Diagram Specification Interfaces TP Port 10/100Base-T RJ45 x 1 F/O Port 100Base-X x 1 Standards IEEE Base-T IEEE 802.3u 100Base-TX/FX LED Power/Status, TP, Speed, FDX, F/O H/W Specification Store and Forward Switching Mechanism Auto-Cross Over for MDI/MDI-X in TP port Auto-Negotiation in TP Port Full/Half Duplex Mode Operation 1K MAC Address Table 48K Bytes Memory Buffer Link Alarm Ethernet Features Support 9K Bytes Jumbo Frame Power Requirement Power Adaptor - AC Input: 100VAC~240VAC - Frequency Range: 50~60Hz - DC Output: 3.3V Power Consumption: 1.9W Environmental Condition Operation: 0 ~ 50 C Storage Temperature: -20 ~ 60 C Humidity: 5% ~ 90% Non-Condensing Dimension & Weight Size: 51 x 74 x 20 mm Weight: 0.1Kg EMC/Safety FCC Class A,CE DS-C043 A01

3 Order Information TP PORT Speed Fiber Type Connector Distance Ports Speed Ports BTFC 100Mbps MM SC 2KM 1 10/100 1 BTFT 100Mbps MM ST 2KM 1 10/100 1 BTFC(SM-30/50/80/100) 100Mbps SM SC 30/50/80/100KM 1 10/100 1 W2A(SM-20/40) 100Mbps SC 20/40KM 1 10/100 1 W2B(SM-20/40) 100Mbps SC 20/40KM 1 10/100 1 SFP 100Mbps SFP /100 1 SFP-20 COPPER PORT Speed Type Connector Distance SFP-20TP 100Mbps - RJ M Temperature SFP-21 Speed Type Connector Distance Wavelength SFP-21FC 100Mbps MM 2KM 1310nm SFP-21FC(SM-20/40/80) 100Mbps SM 20/40/80KM 1310nm/1310nm/1550nm TX:1310nm/1310nm/1490nm SFP-21W2A(SM-20/40/80) 100Mbps 20/40/80KM RX:1510nm/1510nm/1570nm SFP-21W2B(SM-20/40/80) 100Mbps 20/40/80KM TX:1510nm/1510nm/1570nm RX:1310nm/1310nm/1490nm SFP-21W2A(SM-20)SC 100Mbps SC 20KM TX:1310nm RX:1550nm SFP-21W2B(SM-20)SC 100Mbps SC 20KM TX:1550nm RX:1310nm SFP-21FC-C11 100Mbps C 80KM 1470nm SFP-21FC-C12 100Mbps C 80KM 1490nm SFP-21FC-C13 100Mbps C 80KM 1510nm SFP-21FC-C14 100Mbps C 80KM 1530nm SFP-21FC-C15 100Mbps C 80KM 1550nm SFP-21FC-C16 100Mbps C 80KM 1570nm SFP-21FC-C17 100Mbps C 80KM 1590nm SFP-21FC-C18 100Mbps C 80KM 1610nm Temperature DS-C043 A01

4 Innovation to Your Needs Series Media Converter Gigabit Ethernet 10/100/1000Base-T to 100/1000Base-X Media Converter Features Description The World-wide Effortless and Reliable Media Converter The almost set-it-and-forget-it media converter is for minimizing network implementation and maintenance efforts Connection Technology Systems (CTS) series media converter are the Gigabit Ethernet 10/100/1000 Base-T to 100/1000Base-X media converter. The series media converter converts traditional twisted-pair RJ-45 cable into various fiber media including multi-mode, single-mode, SC connector, bi-directional, or a SFP slot for pluggable fiber transceiver, extending transmission distance for the deployment to the household, apartment or campus. 9K Bytes Jumbo Frame Size Support jumbo frame size 9K bytes to ease the network traffic loading and facilitate IPTV service Link Alarm When UTP or fiber port is down during operation, the other port will be automatically turned off to alert the user Fully Compatible with MCT-RACK-18 Series Space-saving and budget limited solution for MCTRACK-18 series to mix installation with MCT series converter Dual Rate Dual Rate media converter with auto-sensing function can automatically adjust to the speed of the slide-in fiber transceiver. This can save the cost when upgrading the device from 100Mbps to 1000Mbps series media converter is fully compliant with IEEE 802.3, 802.3u, 802.3ab & 802.3z standards. Besides, it is equipped with some switching features including store and forward. The installation and operation are simple and straightforward. The operation status can be monitored through a set of diagnostic LED indicators on the front panel. It is especially designed for network operators, metro Ethernet providers, enterprises, SMB, who have the need of implementing fiber optical Ethernet networks over long distance, for FTTX solutions, and are looking for an effortless and reliable 1000Mbps media converter. Target Applications FTTX implementations. Point-to-point fiber connection for long distance DS-C037-_A01

5 Application Diagram Specification Interface TP Port 10/100/1000Base-T RJ-45 x 1 F/O Port 100/1000Base-X x 1 Standards IEEE Base-T IEEE 802.3u 100Base-TX/FX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X H/W Specification Store and Forward Switching Mechanism Auto-Crossover for MDI/MDI-X in TP Port Auto-Negotiation in TP Port Full/Half Duplex Mode Operation Mac Address Table : 2K Memory Buffer (Bytes) : 128K Jumbo Frame (9K Bytes) Slide-In Converter Center LED Power, FDX, Status, Speed, F/O, TP Ethernet Features Support 9K Bytes Jumbo Frame Store and Forward Switching Mechanism Other Features Rear Panel DIP Switch Support Link Alarm Support Slide-In Converter Center Power Requiremrnt Power Adaptor - AC Input: 100VAC~240VAC - Frequency Range: 50~60Hz - DC Output: 3.3V Power Consumption: 2.3W Environmental Condition Operation: 0 ~ 50 Storage Temperature: -20 ~ 60 Humidity: 5% ~ 90%, Non-Condensing Dimension & Weight Size: 51 x 74 x 20 mm (WxDxH) Weight: 0.1Kg EMC/Safety FCC Class A, CE DS-C037-_A01

6 Order Information TP PORT Speed Fiber Type Connector Distance Ports Speed Ports MCT-3002BTFC 1000Mbps MM SC 550M 1 10/100/1000Mbps 1 MCT-3002BTFC(SM- 10/20/30/50/80) 1000Mbps SM SC 10/20/30/50/80KM 1 10/100/1000Mbps 1 MCT-3002W2A(SM-10/20/40) 1000Mbps SC 10/20/40KM 1 10/100/1000Mbps 1 MCT-3002W2B(SM-10/20/40) 1000Mbps SC 10/20/40KM 1 10/100/1000Mbps 1 MCT-3002W2A(SM-10)-DR 100/1000Mbps SC 10KM 1 10/100/1000Mbps 1 MCT-3002W2B(SM-10)-DR 100/1000Mbps SC 10KM 1 10/100/1000Mbps 1 MCT-3002SFP-DR 100/1000Mbps SFP /100/1000Mbps 1 SFP-31-DR Speed Type Connector Distance Wavelength Temperature SFP-31FC-DR 100Mbps/1000Mbps MM 2KM/550M 1310nm SFP-31FC(SM-10)-DR 100Mbps/1000Mbps SM 10KM 1310nm SFP-31W2A(SM-10)-DR 100Mbps/1000Mbps 10KM TX:1310nm RX:1550nm SFP-31W2B(SM-10/)-DR 100Mbps/1000Mbps 10KM TX:1550nm RX:1310nm SFP-31 Speed Type Connector Distance Wavelength Temperature SFP-31FC 1000Mbps MM 550M 850nm SFP-31FC(SM-10/20/40/50/80 10/20/40/50/ nm/1310nm/1310nm/1550nm/1550nm 1000Mbps SM /100/120) /100/120KM 1550nm/1550nm SFP-31W2A(SM-10/20/40/80) SFP-31W2B(SM-10/20/40/80) 1000Mbps 1000Mbps 10/20/40/80KM 10/20/40/80KM TX:1310nm/1310nm/1310nm/1510nm RX:1550nm/1550nm/1550nm/1570nm TX:1550nm/1550nm/1550nm/1570nm RX:1310nm/1310nm/1310nm/1510nm SFP-31FC-C Mbps C 80KM 1470nm SFP-31FC-C Mbps C 80KM 1490nm SFP-31FC-C Mbps C 80KM 1510nm SFP-31FC-C Mbps C 80KM 1530nm SFP-31FC-C Mbps C 80KM 1550nm SFP-31FC-C Mbps C 80KM 1570nm SFP-31FC-C Mbps C 80KM 1590nm SFP-31FC-C Mbps C 80KM 1610nm SFP-21 Speed Type Connector Distance Wavelength Temperature SFP-21FC 100Mbps MM 2KM 1310nm SFP-21FC(SM-20/40/80) 100Mbps SM 20/40/80KM 1310nm/1310nm/1550nm SFP-21W2A(SM-20/40/80) SFP-21W2B(SM-20/40/80) 100Mbps 100Mbps 20/40/80KM 20/40/80KM TX:1310nm/1310nm/1490nm RX:1510nm/1510nm/1570nm TX:1510nm/1510nm/1570nm RX:1310nm/1310nm/1490nm SFP-21W2A(SM-20)SC 100Mbps SC 20KM TX:1310nm RX:1550nm SFP-21W2B(SM-20)SC 100Mbps SC 20KM TX:1550nm RX:1310nm SFP-21FC-C11 100Mbps C 80KM 1470nm SFP-21FC-C12 100Mbps C 80KM 1490nm SFP-21FC-C13 100Mbps C 80KM 1510nm SFP-21FC-C14 100Mbps C 80KM 1530nm SFP-21FC-C15 100Mbps C 80KM 1550nm SFP-21FC-C16 100Mbps C 80KM 1570nm SFP-21FC-C17 100Mbps C 80KM 1590nm SFP-21FC-C18 100Mbps C 80KM 1610nm DS-C037-_A01