M M WIFI Module

Transcription

1 M M WIFI Module Stable and High Performance 32bit MIPS Processor Compliant with IEEE n standard, up to 300Mbps Data Rate Small and Pin Hole Mounting Design 3.3VDC Input Power, Low Power Consumption Support OpenWRT, Linux SDK Software Development

2 Introduction Movingcomm ComIOT M1002 is a small WLAN module for embedded applications. It is based on MT7620N SoC solution and compliant with IEEE b/g/n wireless standards. The module supports TCP/IP stack and takes care Wired-Wireless connectivity. Movingcomm can provide OpenWRT or Linux SDK as software to help your embedded application development. All our module production take 100% QC test before delivery to our customers. Features n Standard Compliant with IEEE b/g/n to have no question to communicate with other WIFI devices. It supports 64/128bit WEP encryption as well as TKIP, AES, WPA, WPA2. The WIFI is 2.4GHz radio frequency featured with 13 channels, 20/40MHz wireless bandwidth, and wireless data transfer rate up to 300Mbps. Mini Size Module The module has 52 x 33mm in size, pin holes mounting design to connect to a main board. It can support UART, JTAG debug interface that required by product development. Embedded Application The ComIOT M1002 module can apply to IoT application, wireless AP, industrial control, data mining, agricultural device, medical wireless equipment, vehicle device and etc.

3 Product Specifications Hardware Specifications CPU MT7620N 32bit MIPS Processor, 580MHz Clock Speed System Memory 32MB SDRAM Flash 4MB SPI Flash Wireless 2.4GHz n MIMO up to 300Mbps Built-in Ceramic Antenna Ethernet 2 x 10/100Mbps Fast Ethernet, auto MDI/X Interfaces USB 1 x USB 2.0 GPIO 1 x GPIO RESET 1 x RESET Power Input 3.3VDC Dimensions 52mm x 33mm x 1mm Weight Approx. 5g Operating Temperature: 0 C to 55 C Environment Storage Temperature: -20 C to 70 C Operating Humidity: 10% to 90% RH Non-condensing Storage Humidity: 5% to 90% RH Non-condensing Certification RoHS Compliance Wireless Specifications Standards IEEE b/g/n Frequencies b/g/n GHz Functions 2.4GHz 1 13 Channel Selection Band Bandwidth 20MHz / 40MHz IEEE b 11M 2.4G: 19±2dBm IEEE g 6M 2.4G: 19±2dBm 54M 2.4G: 15±2dBm RF Output Power 2.4GHz HT20-MCS0: 18±2dBm IEEE n HT20-MCS7: 14±2dBm HT40-MCS0: 18±2dBm HT40-MCS7: 14±2dBm Reception 1M 2.4G: -87±2dBm 2.4GHz IEEE b Sensitivity 11M 2.4G: -83±2dBm

4 IEEE g 6M 2.4G: -85±2dBm 54M 2.4G: -70±2dBm HT20-MCS0: -85±2dBm Wireless Security Software IEEE n HT20-MCS7: -66±2dBm HT40-MCS0: -82±2dBm HT40-MCS7: -63±2dBm WEP/WPA/WPA2 Protected Encryption OpenWRT, Linux SDK Pins Definition Pin Name Description 1 3V3 VDD 3.3V input 1000mA 2 3V3 VDD 3.3V input 1000mA 3 IO2 GPIO2 4 RST Software reset GPIO1 5 RP0 WAN RX+ 6 RM0 WAN RX- 7 TP0 WAN TX+ 8 TM0 WAN TX- 9 TP1 LAN TX+ 10 TM1 LAN TX- 11 RP1 LAN RX+ 12 RM1 LAN RX- 13 UB+ USB2.0+ Host 14 UB- USB2.0- Host 15 GND GROUND 16 GND GROUND 17 3V3 VDD 3.3V input 1000mA 18 3V3 VDD 3.3V input 1000mA

5 Product Dimensions

6 To see the full line of MovingComm products, Visit INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH MOVINGCOMM PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN MOVINGCOMM S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, MOVINGCOMM ASSUMES NO LIABILITY WHATSOEVER, AND MOVINGCOMM DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF MOVINGCOMM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY MOVINGCOMM, THE MOVINGCOMM PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE MOVINGCOMM PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. MovingComm may make changes to specifications and product descriptions at any time, without notice. Buyers must receive a confirmation from MovingComm prior using the product. MovingComm shall have no responsibility whatever for conflicts or incompatibilities arising from future changes to them. Copyright 2017 Shenzhen MovingComm Technology. All rights reserved. SHENZHEN MOVINGCOMM TECHNOLOGY CO., LTD. Office: 2F, Building D, JinYiLai Industrial Park, LiuXianDong Industrial Zone, XiLi Town, NanShan District, Shenzhen , P.R. China Tel: Ext 999, Fax: Ext marketing@movingcomm.com