MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)

Size: px
Start display at page:

Download "MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)"

Transcription

1 MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). Plugs have an easy-to-use ejection mechanism. Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. In addition to connectors for type I and type II cards, a connector for type III cards has been provided. The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. SPECIFICATIONS PIN CONNECTOR (PLUG) CONTACT LENGTH Item Operating temperature range Current rating Voltage rating Contact resistance Insulation resistance Dielectric withstanding voltage Insertion/withdrawal life Specification 55 C to + 85 C DC 0.5 A AC 250 V 40 mω max (6 VDC, 0.1 A) 1000 MΩ min. (500 VDC) 500 VAC for 1 minute Industrial environment: 5,000 times Office environment: 10,000 times Contact type Power, ground pins Card detection pins Other signal pins MATERIALS Item Pin No. 1, 17, 34, 35, 51, 68 36, 67 Others Specification Contact length 5.0 mm (0.196 in.) 3.5 mm (0.137 in.) 4.25 mm (0.167 in.) Plug body: PPS resin UL94V-0 : 6T nylon (for type III card connector) UL94V-0 Insulating material Ejector: Polyester : PPS resin (for SMT and type III card connectors) Conductor Copper alloy Contact: Gold over palladium over nickel Plating (PAGOS) Terminal: Palladium 1

2 ORDERING PART NUMBER [PLUG] FCN-56 5 P 068-G / XC-V4 V4: Conforms to Ver.4 E4: Conforms to Ver.4 and anti-esd Specification Plating G: Gold plating Number of contacts: 68, 136 Body P: Plug Pin type 4: Straight 5: Right-angle 8: SMT 560 series connector Fujitsu connector ORDERING PART NUMBER [SOCKET] FCN-56 8 J 068-G / 0 Terminal type 0: PC board double-sided straddle type B: PC board single-sided mounting type Plating G: Gold plating Number of contacts: 68 Body J: Socket Pin type 8: SMT 560 series connector Fujitsu connector 2

3 RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/C-V (0.02) 11.2 (0.44) 1 (0.039) 4.25 (0.167) 3.5 (0.138) (1.65) 2.5mm (0.098) deep spot facing 35.2 (1.39) 59.7(2.35) (1.65) 7 No.51 No (1.65) No ø 1 (0.039) (Card insertion side) Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board) FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board) Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.)) FCN-565P068-G/02-V4 (10 mm (0.394 in.)) Models which support Type III are also available. Part number: FCN-565P068-G/17-V4 FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board ) RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/01-V (0.059) 3 (0.118) 4 (0.157) 3 (0.118) 42 (1.65) 12.2 (0.48) 2- ø 2.8 (0.11) (34-1) = (1.65) 2.5mm (0.098) deep spot facing 24.9 (0.98) 3.6 (0.141) 58.7 (2.31) (34-1) = (1.65) No (1.65) No.3 Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. In order to avoid damage to the connector, do not pull out the card at an angle. 68- ø 1 (0.039) (Card insertion side) 3

4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/F-V (0.059) 2.5 (0.098) (2) M2.5 (0.098 in.) thread nut (34 1) = (1.65) 1 (0.039) 35.2 (1.385) (34 1) = (1.65) <To be mounted on back of PC board> ±0.05 (0.0039) (68/2-1) = (1.65) No.51 4(0.157) 7 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD) Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD) 0.51 (0.059) 8 (0.315) 6 (0.236) 2- ø 2.2 (0.0866) 35.2 (1.385) (Card insertion side) 68- ø 1 (0.039) A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4 4.5 (0.177) (34 1) = (1.65) 7 No (1.65) No.3 No (2.114) Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board) A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II) 8.5 (Card insertion side) 68- ø 1 (0.039) 4

5 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/A-V4 4.5 (0.177) (34 1) = (1.65) 2.5mm (0.098) deep spot facing 35.2 (1.39) 6 (0.236) (34 1) = (1.65) (68/2-1) = (1.65) 6.7 (0.264) ± ø 1 (0.039) No.51 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE) AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P136-G/0-V4 (8-1) = (0.525) 7 7 (0.276) (0.276) 35.2 (1.39) 11 (0.433) 3 (0.118) (8-1) = (0.525) (68/2-1) = (1.65) 136- ø 1 (0.039) 5

6 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/C34-V4 7 (0.276) 2.5mm (0.098) deep spot facing *A (3.283) 0.51 (0.02) 35.2 (1.386) 59 (2.32) *A mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4 (68/2-1) = (1.65) 68- ø 1 (0.039) 6

7 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black) Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black) Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige) (2.65) 34 (1.339) 2.5mm (0.098) deep spot facing 0.51 (0.020) (3.283) 8 (0.315) 35.2 (1.386) ø 2.8 (0.110) 4.25 (0.167) 3.5 (0.138) R (1.417) 40 (1.574) 2.1 (0.083) 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) 7 8 No.51 No.52 A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4, instead of FCN-565P068-G/XC-V (0.146) 11 (0.433) No (1.65) No.3 4- ø 2.8 (0.110) 34 (1.339) (2.65)~68.0 (2.677) 68- ø 1 (0.039) 40 (1.574) (Card insertion side) 7

8 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/MC-V4 (Button color: Black) Part number: FCN-565P068-G/C22-V4 (Button color: Beige) (2.65) 34 (1.339) 2.5mm (0.098) deep spot facing 0.51 (0.020) (3.283) ø 2.8 (0.110) 35.2 (1.386) 4.25 (0.167) 3.5 (0.138) R (0.433) 3.7 (0.146) 36 (1.417) 40 (1.574) 8 (0.315) 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) (0.083) No.51 No.52 Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4. No (1.65) No.3 4- ø 2.8 (0.110) 34 (1.339) (2.65)~68.0 (2.677) 68- ø 1 (0.039) 40 (1.574) (Card insertion side) 8

9 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/XF-V4 (Button color: Black) Part number: FCN-565P068-G/PF-V4 (Button color: Beige) (2.65) 34 (1.339) 2.5mm (0.098) deep spot facing 0.51 (0.020) 1 (0.039) (3.283) 8 (0.315) 35.2 (1.386) ø 2.8 (0.110) 4.25 (0.167) 3.5 (0.138) R (1.417) 40 (1.574) When a card is ejected 3.7 (0.146) When a card is inserted 2.1 (0.083) 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) MOUNTING EXAMPLE (68/2-1) = (1.65) 4- ø 2.8 (0.110) 68- ø 1 (0.039) 40 (1.574) Nut buried 34 (1.339) (2.65)~68.0 (2.677) Ejector button Regardless of how the connector is mounted on the PC board, a card can be inserted with its face upward. 9

10 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/W-V (0.020) 4.5 (0.177) (2.65) 34 (1.339) 6 (0.236) 2.5 (0.098) 2.1 (0.083) (3.283) 8 (0.315) ø (0.167) 3.5 (0.138) R (0.433) When a card is inserted 3.7 (0.146) When a card is ejected 35.2 (1.386) 10 (0.394) 78.5 (3.091) 42 (1.654) 35.5 (1.398) (0.083) No (0.098) No.2 ±0.1(0.0039) (1.65) No (Card insertion side) ±0.1(0.0039) 68- ø 1 (0.039) MOUNTING EXAMPLE Nut Mounting height 4.5mm(0.177in.) Nut M2.5 screw The connector is mounted on a PC board so that only its terminal connection part rests on the board. 10

11 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM (0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/J25-V4 (supports type I, II card) Part number: FCN-565P068-G/J25-4V (supports type I, II, III card) 0.51 (0.020) 3(0.118) 2.42 (0.095) 2- ø 2.2 (0.087) 0.2 (0.0078) 8 (0.315) 4.5 (0.177) 9 (0.354) ø 2.2, 4.5 deep (3.011) (3.224) 4.25 (0.167) 3.5 (0.138) 35.2 (1.386) When a card is ejected 5.2 (0.205) 12.5 (0.492) When a card is inserted 8 (0.315) 59 (2.323) 42 (1.654) 10 (0.394) 11.5 (0.453) 7 (0.276) 4.5 (0.177) 35.5 (1.398) 8 (0.315) 8.5 (0.335) MOUNTING EXAMPLE (68/2-1) = (1.65) 3.42 (0.135) ø 1 (0.0394) 4 - ø 2.8 (0.110) 51.7 (2.035) (2.429) (0.259) (0.936) (1.330) (3.011) ± (2.830) (3.263) (1.642) (2.429) 0 Component mounting is prohibited in the hatched areas. Components with a height of 4.3 mm (0.169 in.) maximum can be installed under the connector. Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. 11

12 H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm (0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/0442-E4 (with FG clip) Part number: FCN-565P068-G/0426-V4 (with no FG clip) 2.42 (0.095) 2-R ø (0.008) 2.42 (0.095) 2-R ø ø 6 (0.236) 2- ø 2- ø 2.35 (0.0925) (0.150) 0.51 (0.020) 7.8 (0.307) (3.40) 79.3 (3.12) (3.00) 6 (0.236) 35.2 (1.386) 0.77 (When a card is ejected) 8.07 (When a card is inserted) 40 (1.57) (1.69) 2- ø 6 (0.236) 2- ø 2- ø 2.35 (0.0925) (0.150) 0.51 (0.020) (3.40) 79.3 (3.12) (3.00) 6 (0.236) 35.2 (1.386) 0.77 (When a card is ejected) 8.07 (When a card is inserted) 40 (1.57) (1.69) 0.2 (0.008) 1.2 (0.047) 8.5 (0.335) 12 (0.472) (2.83) 10 (0.394) 59 (2.32) 42 (1.654) 35.5 (1.398) 22 (0.866) 34 (1.339) (2.26) R4 9 (0.354) 1.2 (0.047) 8.5 (0.335) 12 (0.472) 22 (0.866) (0.394) (2.83) 59 (2.32) 42 (1.654) 35.5 (1.398) R4 34 (1.339) 9 (0.354) 2- ø 3.5 (0.138) 61.7 (2.43) 0 (68/2 1) = (1.65) 3.42 (0.135) 0 2- ø 3.5 (0.138) 61.7 (2.43) 0 (68/2-1) = (1.65) 3.42 (0.135) (3.0) (0.150) ø 2 (0.079) 68- ø 1 (0.039) 6.58 (0.259) (1.69) 2- ø 4.5 (0.177) 2- ø 8 (0.315) (3.0) ±0.05 ( (0.150) ø 1 (0.039) 6.58 (0.259) 0 2- ø 4.5 (0.177) 2- ø 8 (0.315) (1.69) +0.2 (0.0079) +0.2 (0.0079) 7.8 (0.307) (1.339) 22 (0.866) (2.25) Component mounting is prohibited in the hatched areas (1.339) 22 (0.866) Component mounting is prohibited in the hatched areas. Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. 12

13 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.) RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/J38-E (0.150) 0.51 (0.020) SMT FG Clip 8 (0.315) 28.5 (1.12) 11 (0.433) (3.28) 2.42 (0.0953) 8 (0.315) 35.2 (1.385) 11.5 (0.453) 2- ø 2.2 (0.0866) ø 2.8 (0.110) (2.65) 34 (1.34) 10 (0.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu. R (1.12) 0.2 (0.0079) 8.5 (0.335) 40 (1.57) 2 (0.079) 1.8 (0.071) 4.5 (0.177) (68/2-1) = (1.65) (0.150) 4- ø 2.8 (0.110) 68- ø 1 (0.039) 28.5 (1.12) 40 (1.57) 34 (1.34) ±0.05 (0.002) (2.65)~68.0 (2.68) 13

14 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS Part number: FCN-565P068-G/0221-E (3.28) φ 2.8 (.110) 40 (1.57) 35.2 (1.39) 11.2 (.441) φ 2.8 (.110) 1.8 (.071) 11 (.433) (2.65) 50.8 (2.00) 34 (1.34) R (.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.398) No. 1 No (2.04) No. 68 No (.039) 40 (1.574) 1 (.039) 8 (.315) 11 (.433) 10.5 (.413) 5 (.197) 7 7 (.276) (.276) (0.150) 0.51(0.020) 40 ±0.1 (1.57 ±.002 ) 6-0 (.236-0) 5-0(.197-0) (.173-0) (.347-0) ±0.1 (2.00 ±0.004 ) 1.27 x (68/2-1) = ±0.1 (1.65 ±0.004 ) 1.27 ±0.05 (0.05 ±0.002 ) ±0.05 (.075 ±0.002 ) ±0.05 (.150 ±0.002 ) ±0.05 (.225 ±0.002 ) ( ) ( ) 75-0 (2.95-0) 68-φ 1 ±0.05 (.039 ±0.002 ) 34 ±0.05 (1.33 ±0.002 ) ( ) Note 3 Note 2 PCB Foot Print Viewed from Connector Side NOTE 2 NOTE 3 NOTE 4 COMPONENT CON NOT BE MOUNTED IN THIS AREA COMPONENTS THAT HAVE 5mm HEIGHT CAN BE MOUNTED IN THIS AREA UNLESS OTHERWISE SPECIFIED TOLERANCES ARE ±0.5mm (0.002 in.) 14

15 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS Part number: FCN-565P068-G/0231-E4 1 (.039) 40 (1.574) 1 (.039) 8 (.315) 11 (.433) 10.5 (.413) 5 (.197) (2.65) 50.8 (2.00) 34 (1.34) φ 2.8 (.110) 11.2 (.441) 35.2 (1.39) 40 (1.57) (3.28) φ 2.8 (.110) 10 (.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.398) No. 1 No (.071) 11 (.433) 51.7 (2.04) No. 35 No (.276) (.276) (0.150) 0.51(0.020) 40 ±0.1 (1.57 ±.002 ) 6-0 (.236-0) 5-0(.197-0) (.173-0) (.347-0) ±0.1 (2.00 ±0.004 ) 1.27 x (68/2-1) = ±0.1 (1.65 ±0.004 ) 1.27 ±0.05 (0.05 ±0.002 ) ±0.05 (.075 ±0.002 ) ±0.05 (.150 ±0.002 ) ±0.05 (.225 ±0.002 ) ( ) ( ) 75-0 (2.95-0) 68-φ 1 ±0.05 (.039 ±0.002 ) 34 ±0.05 (1.33 ±0.002 ) ( ) Note 3 Note 2 PCB Foot Print Viewed from Connector Side NOTE 2 NOTE 3 NOTE 4 COMPONENT CON NOT BE MOUNTED IN THIS AREA COMPONENTS THAT HAVE 5mm HEIGHT CAN BE MOUNTED IN THIS AREA UNLESS OTHERWISE SPECIFIED TOLERANCES ARE ±0.5mm (0.002 in.) 15

16 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE) Part Number: FCN-565P136-G/Z-V4 (8-1) = (0.525) 7 7 (0.276) (0.276) 2.42 (0.0953) 40 (1.57) 1 (0.039) 35.2 (1.385) (2.65) 34 (1.34) 40 (1.57) (3.28) 8 (0.315) 10 (0.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) 11 (0.433) 3.7 (0.146) (When a card is ejected) Connector with the left and right ejector buttons Part Number: FCN-565P 136G/005-V4 (8-1) = (0.525) 7 7 (0.276) (0.276) (3.28) 2.42 (0.0953) 40 (1.57) 35.2 (1.385) 1 (0.039) 3.7 (0.146) (2.65) 34 (1.34) 40 (1.57) 11 (0.433) 11 (0,.433) 10 (0.394) 42 (1.654) 35.5 (1.398) No. 1 No (0.394) 42 (1.654) 35.5 (1.398) 11 (0.433) No. 34 No (0.433) 2.1 (0.083) No. 1 No. 35 No. 68 No. 34 (8-1) = (0.525) (68/2-1) = (1.65) 34 (1.339) 136- ø 1 ± (2.65) 4- ø 2.8 (0.110) 40 (1.575) 16

17 FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS 25 (.984) 7.22 (.284) 50.6 (1.99) 11 (.433) 7 (.275) Right Button FCN-560A08 Button Color BLACK ESD 10 (.394) FCN-560A14 BEIGE (2.650) 34 (1.34) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) φ 2.8 (.110) 8 (.315) 2.1 (.083) 4 (.157) 4 (.157) 4.8 (.189) φ 2.8 (.110) 8 (.315) 2.1 (.083) 4 (.157) Left Button FCN-560A16 Button Color BLACK ESD FCN-560A22 BEIGE (2.650) 34 (1.34) 7.22 (.284) 51 (2.01) min. 10 (.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) 25 (.984) 50.6 (1.99) 11 (.433) 7 (.275) 4 (.157) 4.8 (.189) 17

18 STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE Part number: FCN-564P068-G/A-V (2.35) 1.27 x (34-1) = 41.9 (1.65) 5.50 (.216) 3.00 (.118) (1.016) 8.30 (.327) 7.63 (.300) 7 No (.276) (1.76) (2.039) 2.40 (.0945) 6.00 (.236) (.425) 1.27 x (68/2-1) = (1.65) (0.118) No Ø 1 (0.0394) 51.8 (2.039) 18

19 2- Ø 2.8 (0.110) 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR) Part number: FCN-564P068-G/0-V4 74 (2.91) Polarization Post (2.6) 5.5 (0.217) 4.25 (0.167) 1 (0.039) 3.5 (0.138) (1.65) 35.2 (1.390) 7 (0.394) 2- Ø 2.8 (0.110) (1.65) 7 No.51 A model with the feature of preventing mismated board mounting is available. Contact Fujitsu. 6 (0.236) No (2.6) (1.65) No (0.118) 68- Ø 1 (0.0394) 2- Ø 2.8 (0.110) Ø 1.00 (0.0394) used for polarization post 19

20 Ø 2.8 (0.110) 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR) Part number: FCN-564P068-G/X0-V4 74 (2.91) (2.65) (3.28) 35.2 (1.39) (2.6) 34 (1.34) (1.65) 3.5 (0.138) 4.25 (0.167) R1.4 2 Ø 2.8 (0.110) 11 (0.433) 8 (0.315) 36 (1.42) (When a cardis inserted) 40 (1.57) 3.7 (0.146) (When a cardis ejected) 4.8 (0.177) 2.1 (0.083) 10 (0.394) 78.5 (3.09) 42 (1.653) 35.5 (1,40) 7 No.51 No (2.6) (1.65) No.3 2- Ø 2.8 (0.110) 68- Ø 1 (0.0394) 20

21 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) Web: North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA U.S.A. Tel: (1-408) Fax: (1-408) Web: Europe Fujitsu Components Europe B.V. Diamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) Web: emea.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore Tel: (65) Fax: (65) Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2,

MEMORY CARD CONNECTORS (JEIDA CONFORMABLE)

MEMORY CARD CONNECTORS (JEIDA CONFORMABLE) MEMORY CARD CONNECTORS (JEIDA CONFORMABLE) 560H SERIES DRAM CARD CONFORMING TO Ver. 1 FEATURES These connectors conform to the Japan Electronic Industry Development Association (JEIDA) DRAM card Ver. 1.0

More information

Materials. Specification Operating temperature range. 55 C to +105 C Current rating

Materials. Specification Operating temperature range. 55 C to +105 C Current rating PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder

More information

2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION

2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION 2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-086 /087 SERIES OVERVIEW Fujitsu s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed

More information

2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION

2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed

More information

DDR-3 DIMM Vertical Mount Socket

DDR-3 DIMM Vertical Mount Socket Not for New Designs DDR-3 DIMM Vertical Mount Socket FCN-07 Series FEATURES DDR-3: 240pin DIMM socket connector (press-fit or through hole type) Fujitsu original unique structure for twin contact points

More information

RY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION

RY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric strength

More information

FUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module

FUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module FUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module Not for New Designs Overview This is a 288-pin DIMM socket that conforms to JEDEC standards. RoHS compliant

More information

DISCONTINUED (1999) UR1 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION

DISCONTINUED (1999) UR1 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION MINIATURE RELAY 2 POLES ( SIGNAL HIGH FREQUENCY ) SWITCHING UR1 SERIES FEATURES Subminiature polarized relay Excellent high frequency characteristics Isolation : minimum 60 db } at 900 MHz Insertion loss:

More information

Maximum Load Current 3A SG Series

Maximum Load Current 3A SG Series Non-promotional not for new designs FTR-K1 SERIES SOLID STATE RELAY Maximum Load Current 3A SG Series FEATURES Conforms to UL, CSA Standards Slim, SIL Terminal Type - Size: 9.0 (W) 40.0 (L) 20.0(H) mm

More information

POWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES

POWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120

More information

POWER RELAY. FTR-F4G Series. 2 POLE - 5A - 1.5mm contact gap FTR-K1 SERIES FEATURES

POWER RELAY. FTR-F4G Series. 2 POLE - 5A - 1.5mm contact gap FTR-K1 SERIES FEATURES POWER RELAY 2 POLE - 5A - 1.5mm contact gap FTR-F4G Series FTR-K1 SERIES FEATURES 2 Pole, 5A 2 Form A Contact gap 1.5mm Sealed type available High insulation in small package (between coil and contact)

More information

PC BOARD CONNECTORS 740 SERIES

PC BOARD CONNECTORS 740 SERIES P ORD ONNETORS 740 SERIES FETURES Various types of headers are available: one side shrouded, both sides shrouded, with simplified latch, and box type. The connector having a simplified latch prevents the

More information

Data Sheet Fujitsu Narrow Pitch Stacking Connector FCN-280 Series

Data Sheet Fujitsu Narrow Pitch Stacking Connector FCN-280 Series ata Sheet FCN-28 series Not for New esign ata Sheet Fujitsu Narrow Pitch Stacking Connector FCN-28 Series Fujitsu board-to-board narrow pitch stacking connector for use in measurement and factory automation

More information

4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042 R

4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042 R -Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server

More information

4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042

4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042 -Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server

More information

SIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES

SIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES FTR-K1 SERIES SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap FTR-C2 Series FEATURES DPDT 2A Contact gap: more than 2.0mm Conforms to IEC60950 / EN60950 / UL1950/ CSA C22.2 No.950 Working voltage

More information

NOT FOR NEW DESIGNS AS SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION

NOT FOR NEW DESIGNS AS SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Flat type relay for surface mounting Super small and light weight Height: 6.5 mm Weight: approximately 1.5 g UL, CSA recognized Conforms

More information

8-Port Intelligent KVM Switch SERVIS FS-1008MT Series NC14004-B082 R

8-Port Intelligent KVM Switch SERVIS FS-1008MT Series NC14004-B082 R 8-Port Intelligent Switch SERVIS FS-1008MT Series NC14004-B082 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or

More information

microgigacn TM Cable I/O Infiniband Cable Assemblies FCN-260(D) Series microgigacn

microgigacn TM Cable I/O Infiniband Cable Assemblies FCN-260(D) Series microgigacn microgigacn TM Cable I/O Infiniband Cable Assemblies FCN260(D) Series microgigacn Selected by InfiniBand as the I/O Interface Standard for the 4X and 12X FEATURES I/O Connector designed for high speed

More information

JV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)

JV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e) FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Power Relay JV-KS Series FEATURES Low profile and space saving - Height: 12.5 mm - Mounting space: 175 mm 2 High insulation - Insulation distance: 8 mm - Dielectric

More information

DISCONTINUED in FBR-512WR HAS BEEN DISCONTINUED in 2012

DISCONTINUED in FBR-512WR HAS BEEN DISCONTINUED in 2012 COMPACT POWER RELAY POLE A (FOR AUTOMOTIVE FLASHER LAMP LOAD APPLICATIONS ),2 ( WR) SERIES FEATURES Relay for flasher lamp load (automotive application) newly added to our compact power relay, Series.

More information

New relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay

New relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)

More information

A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant

A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC

More information

MAXIMUM LOAD CURRENT 1 A SJ SERIES

MAXIMUM LOAD CURRENT 1 A SJ SERIES SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability,

More information

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape

More information

COMPACT HIGH POWER RELAY

COMPACT HIGH POWER RELAY FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 40A (For Automotive Applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface

More information

Preliminary POWER RELAY. FTR-F3 Series. 1 POLE - 10A changeover relay FTR-K1 SERIES FEATURES

Preliminary POWER RELAY. FTR-F3 Series. 1 POLE - 10A changeover relay FTR-K1 SERIES FEATURES New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 10A changeover relay FTR-F3 Series FEATURES Low profile and space saving - Height: 15mm - Mounting space:

More information

POWER RELAY. FTR-K3L-WG Series. 1 POLE - 25A - Latching relay FTR-K1 SERIES FEATURES

POWER RELAY. FTR-K3L-WG Series. 1 POLE - 25A - Latching relay FTR-K1 SERIES FEATURES POWER RELAY 1 POLE - 25A - Latching relay FTR-K3L-WG Series FEATURES 1 pole, 25A 2 coils latching type 1 Form A Contact gap 1.5mm 2.5kV surge breakdown voltage Compliance with European photovoltaic standard

More information

Preliminary FBR-59-HW. 1 POLE - Small high power 60A relay POWER RELAY FTR-K1 SERIES

Preliminary FBR-59-HW. 1 POLE - Small high power 60A relay POWER RELAY FTR-K1 SERIES New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - Small high power 60A relay FBR-59-HW FEATURES 1 pole, 60A, 1 form U High temperature grade (-40 C to

More information

FTR-K1 SERIES POWER RELAY 1 POLE - 25A

FTR-K1 SERIES POWER RELAY 1 POLE - 25A POWER RELAY 1 POLE - 25A Latching Relay FTR-K3L Series FTR-K1 SERIES FEATURES 1 pole, 25A, 1 form A 2 coils latching type High insulation (between coil and contacts) Insulation distance: clearance min.

More information

POWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control

POWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal

More information

2 POLES - 2 A (Slim Profile Signal Relay)

2 POLES - 2 A (Slim Profile Signal Relay) FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum

More information

COMPACT POWER RELAY. FTR-P3 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES

COMPACT POWER RELAY. FTR-P3 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 25A (for automotive applications) FTR-P3 Series FEATURES Compact for high density packaging High contact capacity with proven contact material. (100,000 operations,

More information

DISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity

DISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric

More information

1 POLE - 10A Low Profile Type. (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only)

1 POLE - 10A Low Profile Type. (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only) FTR-K1 SERIES POWER RELAY 1 POLE - 10A Low Profile Type FTR-H1 Series FEATURES Working class: B (for IMQ)/ C (for VDE) Type of service: continuous duty Low profile (height 16.5 mm) 1 form A/ 1 form C 10

More information

2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving

2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,

More information

FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES

FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/2 minutes, 30 A/1 hour) Suitable

More information

SERVIS TM DRAWER FD-1100MT Series

SERVIS TM DRAWER FD-1100MT Series 1U TFT-LCD 17 Multi-Interface Console Drawer SERVIS TM DRAWER FD-1100MT Series The SERVIS TM Drawer offers the latest, comfortable and efficient way to control server cabinets for Reliability, Availability,

More information

SILENT RELAY. FTR-P5 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES

SILENT RELAY. FTR-P5 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES FTR-K1 SERIES SILENT RELAY 1 POLE - 25A (for automotive applications) FTR-P5 Series FEATURES Low operating sound An original silent mechanism decreases the propagation of operating sound when mounted on

More information

2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)

2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part

More information

FBR51 Latching Series

FBR51 Latching Series FTR-K1 SERIES COMPACT POWER RELAY 2 POLE - 30A (For Automotive Applications) FBR51 Latching Series FEATURES Magnetically latched PCB relay Increased ambient temperature range up to 125C Two coils with

More information

FTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES

FTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES FTR-K1 SERIES POWER RELAY 1 POLE - 16A 105 C FTR-K1 Series FEATURES Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge

More information

1 POLE - 6A Slim Type (Medium Load Control) (a) Relay type FTR-LY : FTR-LY-Series

1 POLE - 6A Slim Type (Medium Load Control) (a) Relay type FTR-LY : FTR-LY-Series POWER RELAY FTR-LY Series FTR-K1 SERIES 1 POLE - 6A Slim Type (Medium Load Control) FEATURES Slim 15.0mm (h) x 5.0 mm (w) x 28.0mm (l) 1 form C and right angle type available Mounting space: 140mm 2, weight:

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant

More information

ULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES

ULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,

More information

FTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES

FTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation

More information

DISCONTINUED FTP-632UCL531 / USL530 DESIGNATION

DISCONTINUED FTP-632UCL531 / USL530 DESIGNATION 24V driven receipt printer unit 3 printer unit FTP-632UCL531 / USL530 Overview The FTP-632 UCL/USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed

More information

1 POLE 8 A (MEDIUM LOAD CONTROL)

1 POLE 8 A (MEDIUM LOAD CONTROL) FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form

More information

POWER RELAY. FTR-F3 Series 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-F3 P A 012 V [Example] (a) (b) (c) (d) (e)

POWER RELAY. FTR-F3 Series 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-F3 P A 012 V [Example] (a) (b) (c) (d) (e) FTR-K1 SERIES POWER RELAY 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-F3 Series FEATURES High inrush 50A/80A, TV rating capability Flat and slim power relays - Flat type (right angle type): height: 7mm Mounting

More information

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW HIGHLIGHTS

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW HIGHLIGHTS 24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW This thermal printer (driven by 24 VDC) provides high speed printing for 2-inch wide paper (60 mm). This printer

More information

RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS

RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric

More information

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW HIGHLIGHTS

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW HIGHLIGHTS 24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW This thermal printer (driven by 24 VDC) and cutter provide high speed printing for 3-inch

More information

RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS

RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric

More information

battery drive, 4" high speed thermal printer

battery drive, 4 high speed thermal printer battery drive, 4" high speed thermal printer FTP-648MCL103/104, Easy Loading Method FTP-608 series Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer,

More information

JV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION

JV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:

More information

1 POLE - 5A Medium Load Control

1 POLE - 5A Medium Load Control FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in

More information

FTP-628MCL113, Easy Load & Mount Method

FTP-628MCL113, Easy Load & Mount Method battery drive, FTP-608 Series 2 high speed thermal printer FTP-628MCL113, Easy Load & Mount Method Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer,

More information

24V drive, FTP-609 series

24V drive, FTP-609 series 24V drive, FTP-609 series 4" Ultra high speed mechanism FTP-649MCL103/104, Easy Loading Method Overview The easy loading FTP-609 MCL Series is compact ultra high speed, 24V driven thermal printer, printing

More information

POWER RELAY. VF Series. 1 POLE - 20/25/30A - Heavy power control FTR-K1 SERIES. To be discontinued FEATURES

POWER RELAY. VF Series. 1 POLE - 20/25/30A - Heavy power control FTR-K1 SERIES. To be discontinued FEATURES To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 20/25/30A - Heavy power control VF Series FEATURES UL, CSA, VDE recognized TV-15 rated 1 form A contact (SPST-NO) Heavy duty 20 to 30A small power

More information

battery drive, FTP-608 Series

battery drive, FTP-608 Series battery drive, FTP-608 Series 3" high speed thermal printer Easy Loading Method Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing 3-inch

More information

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 15A VS-NR Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-8 is available Working class: C UL class B (130 C) wire class

More information

(a) Relay type FBR51 : FBR51 Series - Standard type (contact gap 0.3 mm) FBR52 : FBR52 Series - Wide contact gap type (contact gap 0.

(a) Relay type FBR51 : FBR51 Series - Standard type (contact gap 0.3 mm) FBR52 : FBR52 Series - Wide contact gap type (contact gap 0. FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 30A (For Automotive Applications) FBR51, 52 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 35 A/10 minutes,

More information

SERVIS DRAWER FD-1000AT

SERVIS DRAWER FD-1000AT 1U TFTLCD Console Drawer SERVIS DRAWER FD1000AT The SERVIS Drawer offers the latest, comfortable and efficient way to control server cabinets for Reliability, Availability, and Serviceability. FEATURES

More information

24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT PRELIMINARY. Height 110 mm, width 81/86 mm, depth 150 mm

24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT PRELIMINARY. Height 110 mm, width 81/86 mm, depth 150 mm 24V DRIVEN, RECEIPT PRINTER MINI UNIT 2 HIGH SPEED THERMAL PRINTER UNIT FTP-627USL525/526 OVERVIEW The FTP-627 USL Series are 24V driven high-speed printers with a ultra low profile auto cutter and long

More information

BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD

BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD FTP-624MCL001/002/FTP-624DCL/DSL OVERVIEW FTP-624MCL/FTP-624DCL Series is a high speed line thermal printer driven by battery,

More information

SERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R

SERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R SERVIS TM Cat5 Wide Band Extender FE-2000CW series - NC14004-B717/U R The SERVIS family Cat5 Wide Band Extender enables the user to operate a control console with a high-resolution monitor via Cat5E UTP

More information

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with type), RTIII K : Plastic sealed type, RTIII

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with type), RTIII K : Plastic sealed type, RTIII To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation Type of service:

More information

24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER

24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER 24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER FTP-642MCL001/002 FTP-642MCL301/302 OVERVIEW FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal printer driven

More information

FTR-P3 Series (Reflowable)

FTR-P3 Series (Reflowable) COMPACT POWER RELAY For automotive applications 1 POLE-25A (for 12V car battery) FTR-P3 Series (Reflowable) FEATURES Compact for high density packaging 1 pole 25A, 1 form A / 1 form C Coil power savings

More information

DIFFERENTIAL CONNECTOR

DIFFERENTIAL CONNECTOR DIFFERENTIAL CONNECTOR FCN-26(D) Series microgigacn RoHS Compliant Features I/O Connector designed for high speed differential signal applications. Matched Impedance (1 ohms ±1%) Low insertion loss Low

More information

FTR-K1 HIGH CAPACITY 20A TYPE

FTR-K1 HIGH CAPACITY 20A TYPE FTR-K1 HIGH CAPACITY 20A TYPE 1 POLE - Power Relay FTR-K1 Series FEATURES High capacity 20A (1 form A type) Low profile (height: 15.7mm) High insulation. Insulation distance: min. 10mm between coil and

More information

ULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series

ULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series Non-promotional not for new designs FTR-K1 SERIES ULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series FEATURES Excellent high-frequency characteristics

More information

2 TYPE MECHANISM (Cutter option)

2 TYPE MECHANISM (Cutter option) FTP-629MCL054/353/354-R 24V DRIVE, FTP-609 Series Ultra high speed (200mm/s) 2 TYPE MECHANISM (Cutter option) verview The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing

More information

COMPACT POWER RELAY. FTR-V1 Series. 1 POLE - 210A Battery Latching relay FTR-K1 SERIES FEATURES. Applications PARTNUMBER INFORMATION

COMPACT POWER RELAY. FTR-V1 Series. 1 POLE - 210A Battery Latching relay FTR-K1 SERIES FEATURES. Applications PARTNUMBER INFORMATION FTR-V1 Series FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 21A Battery Latching relay FEATURES 1 pole 21A 1 form B relay for 12V car battery Low profile Double winding latching relay 21A (at 85 o C) / 12A

More information

POWER RELAY. FTR-K4 Series. 120A Latching Relay. Preliminary FTR-K1 SERIES

POWER RELAY. FTR-K4 Series. 120A Latching Relay. Preliminary FTR-K1 SERIES FTR-K1 SERIES POWER RELAY 10A Latching Relay FTR-K Series FEATURES Switching current : 10 A (1 form A) Contact resistance : Max. 0. mω (Initial) Compact size : 3.0 x 37.0 x.0 mm Plastic materials conform

More information

COMPACT HIGH POWER RELAY

COMPACT HIGH POWER RELAY COMPACT HIGH POWER RELAY 1 POLE - 30A (For automotive applications) FBR3 Series FEATURES Compact for high density packaging High contact capability (30A continuous) High temperature grade (-40 C to 12

More information

24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302

24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302 24V DRIVE INTERFACE BOARD FTP-621DCL002/012 FOR FTP-621/631/641MCL101/102/301/302 INTERFACE 1. Centronics standard (1) Connector (CN10) Connector part number : FCN-605Q030-G/M (Fujitsu Components) or equivalent

More information

battery driven, FTP-608 Series

battery driven, FTP-608 Series battery driven, FTP-608 Series 3 high speed thermal printer Overview The FTP-638 MCL Series are 5V driven high-speed printers with a ultra low profile auto cutter and long life. The FTP-638 MCL Series

More information

COMPACT POWER RELAY (automotive applications) FTR-P3 Series. Preliminary. 1 POLE - 6A (For 24V car battery) FEATURES. Part Numbers

COMPACT POWER RELAY (automotive applications) FTR-P3 Series. Preliminary. 1 POLE - 6A (For 24V car battery) FEATURES. Part Numbers COMPACT POWER RELAY (automotive applications) 1 POLE - 6A (For 24V car battery) FEATURES Compact for high density packaging. High contact capacity with proven contact material. (100,000 operations, 28V,

More information

POWER RELAY. JSL Series. 1 POLE - 8A Polarized Latching Type

POWER RELAY. JSL Series. 1 POLE - 8A Polarized Latching Type POWER RELAY 1 POLE - 8A Polarized Latching Type JSL Series FEATURES Small footprint Width: 10mm Height: 12.5mm High insulation Insulation distance : 8.0 mm (between coil and contacts) Dielectric strength

More information

COMPACT HIGH POWER RELAY

COMPACT HIGH POWER RELAY COMPACT HIGH POWER RELAY 1 POLE - 40A (For automotive applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface mount compatible

More information

POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgCdO contacts) Non Promotional (Not for new designs)

POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgCdO contacts) Non Promotional (Not for new designs) POWER RELAY 1 POLE - 3, A Medium Load Control (AgCdO contacts) JY Series Non Promotional (Not for new designs) FEATURES UL, CSA recognized High sensitivity and low power consumption High insulation Wide

More information

ELCO Memory Card Components

ELCO Memory Card Components ELCO Memory Card Components Table of Contents ELCO PCMCIA PC Memory Card Components Host Device Components Introduction... 3 Features & Benefits... 4 PC Memory Card Components Selection Guide...5 Host

More information

FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES

FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/10 minutes, 30 A/1 hour)

More information

NOT FOR NEW DESIGN. FTP628 MCL383, Easy Loading Method (ELM) BATTERY DRIVE, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER WITH CUTTER OVERVIEW

NOT FOR NEW DESIGN. FTP628 MCL383, Easy Loading Method (ELM) BATTERY DRIVE, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER WITH CUTTER OVERVIEW BATTERY DRVE, FTP-608 Series 2 HGH SPEED THERMAL PRNTER WTH CUTTER FTP628 MCL383, Easy Loading Method (ELM) OVERVEW The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal

More information

2 POLES-2A High insulation/wide gap

2 POLES-2A High insulation/wide gap FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric

More information

COMPACT POWER RELAY. FTR-G1 Series. 1 POLE - 25A (For Automotive Applications) FTR-K1 SERIES FEATURES APPLICATIONS PARTNUMBER INFORMATION

COMPACT POWER RELAY. FTR-G1 Series. 1 POLE - 25A (For Automotive Applications) FTR-K1 SERIES FEATURES APPLICATIONS PARTNUMBER INFORMATION FTR-K SERIES COMPACT POWER RELAY POLE - A (For Automotive Applications) FTR-G Series FEATURES Compact for high density packaging High contact capacity with proven contact material (min., operations, V,

More information

1 POLE - 5A Change Over Relay

1 POLE - 5A Change Over Relay POWER RELAY 1 POLE - 5A Change Over Relay FTR-F3 Series FEATURES High density mounting Height: 15mm Mounting space: 164mm 2 High insulation Insulation distance: 7mm between coil and contacts (conforms

More information

24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012

24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012 24V DRIVE INTERFACE BOARD (PARALLEL) FTP-622DCL001/011/ FTP-622DSL001/011/012 FOR FTP-622/632/642MCL001/002/301/302/303/304 INTERFACE 1. Centronics (1) Connector (CN1) Connector part number : FCN-605Q030-G/S

More information

POWER RELAY. FTR-C1 Series. 2 POLES-2A High insulation/wide gap FTR-K1 SERIES FEATURES

POWER RELAY. FTR-C1 Series. 2 POLES-2A High insulation/wide gap FTR-K1 SERIES FEATURES FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric

More information

POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgNi contacts)

POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgNi contacts) POWER RELAY 1 POLE - 3, A Medium Load Control (AgNi contacts) JY Series FEATURES Small and good for high density mounting Mounting space mm, height 1.mm UL, CSA recognized High sensitivity and low power

More information

COMPACT HIGH POWER RELAY

COMPACT HIGH POWER RELAY COMPACT HIGH POWER RELAY For automotive applications POLE - 6A (For 2V Car Battery) FBR59-HW Series FEATURES pole, 6A, form U High temperature grade (-4 C to 25 C) Comparable capability with Power Mini

More information

FUJITSU Component Thermal Printer FTP-63HMCL153 series

FUJITSU Component Thermal Printer FTP-63HMCL153 series FUJITSU Component Thermal Printer FTP-63HMCL153 series Fujitsu 3 high speed thermal printer mechanism Overview The compact, low voltage FTP-63HMCL series provides an ultra low profie design and high speed

More information

POWER RELAY. FTR-K1 Series 1 POLE - 12A FTR-K1 SERIES FEATURES

POWER RELAY. FTR-K1 Series 1 POLE - 12A FTR-K1 SERIES FEATURES FTR-K1 SERIES POWER RELAY 1 POLE - 12A FTR-K1 Series FEATURES 12A 3.mm and.mm terminal pitch Low profile (height: 1.7mm) High insulation Insulation distance (between coil and contacts): 1mm min. Dielectric

More information

IP68 Sealed - Mini USB Buccaneer

IP68 Sealed - Mini USB Buccaneer IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB

More information

PRELIMINARY FTP-63AUSL001

PRELIMINARY FTP-63AUSL001 24V DRIVE, FTP-60A Series Ultra high speed (250mm/s) 3" KISK receipt PRINTER UNIT FTP-63AUSL001 verview The FTP-60AUSL Series thermal printer (driven by 24VDC) provides ultrahigh speed printing (250mm/s)

More information

BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS

BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER, Easy Loading Method OVERVIEW The 2-inch (58mm), FTP-62DMCL series is an ultra compact, low voltage thermal printer mechanism with a removable

More information

1 POLE - 16A 80A Inrush type

1 POLE - 16A 80A Inrush type POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 1.7mm) High insulation Insulation distance (between coil and contacts): 10mm

More information

1 POLE - 5A, TV-3 / TV-5 Type Relay A P. : 1 form A, slim type : 1 form A, flat type

1 POLE - 5A, TV-3 / TV-5 Type Relay A P. : 1 form A, slim type : 1 form A, flat type POWER RELAY 1 POLE - 5A, TV-3 / TV-5 Type Relay FTR-F3 Series FEATURES High inrush 51A/78A, TV rating capability Flat and slim power relays Flat type (right angle type): height: 7mm Mounting space: 33mm²

More information

FUJITSU Component Thermal Printer FTP-64GMCL153 series

FUJITSU Component Thermal Printer FTP-64GMCL153 series FUJITSU Component Thermal Printer FTP-64GMCL153 series Fujitsu 4 high speed (200mm/s)thermal printer mechanism Overview The FTP-64GMCL series thermal printer driven by 24VDC provides high speed printing

More information