Sun Fire V100 Server Product Notes

Transcription

1 Sun Fire V100 Server Product Notes Sun Microsystems, Inc. 901 San Antonio Road Palo Alto, CA U.S.A Part No May 2002 Revision A Send comments about this document to: docfeedback@sun.com

2 Copyright 2002 Sun Microsystems, Inc., 901 San Antonio Road, Palo Alto, CA U.S.A. All rights reserved. This product or document is distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or document may be reproduced in any form by any means without prior written authorization of Sun and its licensors, if any. Third-party software, including font technology, is copyrighted and licensed from Sun suppliers. Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in the U.S. and other countries, exclusively licensed through X/Open Company, Ltd. Sun, Sun Microsystems, the Sun logo, AnswerBook2, docs.sun.com, Netra, and Solaris are trademarks, registered trademarks, or service marks of Sun Microsystems, Inc. in the U.S. and other countries. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and other countries. Products bearing SPARC trademarks are based upon an architecture developed by Sun Microsystems, Inc. The OPEN LOOK and Sun Graphical User Interface was developed by Sun Microsystems, Inc. for its users and licensees. Sun acknowledges the pioneering efforts of Xerox in researching and developing the concept of visual or graphical user interfaces for the computer industry. Sun holds a non-exclusive license from Xerox to the Xerox Graphical User Interface, which license also covers Sun s licensees who implement OPEN LOOK GUIs and otherwise comply with Sun s written license agreements. Federal Acquisitions: Commercial Software Government Users Subject to Standard License Terms and Conditions. DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Copyright 2002 Sun Microsystems, Inc., 901 San Antonio Road, Palo Alto, CA Etats-Unis. Tous droits réservés. Ce produit ou document est distribué avec des licences qui en restreignent l utilisation, la copie, la distribution, et la décompilation. Aucune partie de ce produit ou document ne peut être reproduite sous aucune forme, par quelque moyen que ce soit, sans l autorisation préalable et écrite de Sun et de ses bailleurs de licence, s il y en a. Le logiciel détenu par des tiers, et qui comprend la technologie relative aux polices de caractères, est protégé par un copyright et licencié par des fournisseurs de Sun. Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l Université de Californie. UNIX est une marque déposée aux Etats-Unis et dans d autres pays et licenciée exclusivement par X/Open Company, Ltd. Sun, Sun Microsystems, le logo Sun, AnswerBook2, docs.sun.com, Netra, et Solaris sont des marques de fabrique ou des marques déposées, ou marques de service, de Sun Microsystems, Inc. aux Etats-Unis et dans d autres pays. Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc. aux Etats-Unis et dans d autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun Microsystems, Inc. L interface d utilisation graphique OPEN LOOK et Sun a été développée par Sun Microsystems, Inc. pour ses utilisateurs et licenciés. Sun reconnaît les efforts de pionniers de Xerox pour la recherche et le développement du concept des interfaces d utilisation visuelle ou graphique pour l industrie de l informatique. Sun détient une licence non exclusive de Xerox sur l interface d utilisation graphique Xerox, cette licence couvrant également les licenciés de Sun qui mettent en place l interface d utilisation graphique OPEN LOOK et qui en outre se conforment aux licences écrites de Sun. LA DOCUMENTATION EST FOURNIE EN L ETAT ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L APTITUDE A UNE UTILISATION PARTICULIERE OU A L ABSENCE DE CONTREFAÇON. Please Recycle

3 Introduction This document provides information that became available after the Sun Fire V100 Server User s Guide went to print. The document contains the following sections: Available Online Documentation on page 4 System Software Requirements on page 4 Reinstalling the Solaris Operating Environment on page 4 Using the Solaris Network Cache and Accelerator (SNCA) on page 4 Front Bezel on page 5 Precautions for Using the System Configuration Card on page 6 Open Issues on page 6 Optional Components on page 9 Hardware Configurations on page 9 Operating Power Statistics on page 10 3

4 Available Online Documentation Online documentation is available at the following URL: Check this site periodically for the latest versions of the product documentation. System Software Requirements The Sun Fire V100 server requires the Solaris 8 (2/02) Operating Environment or later. The server is supplied with this software preinstalled. Reinstalling the Solaris Operating Environment The earliest version of the Solaris operating environment supported on the Sun Fire V100 server is Solaris 8 (2/02). To reinstall the Solaris operating environment onto a Sun Fire V100 server, refer to the Solaris Installation Guide ( ) and the Solaris Advanced Installation Guide ( ). Using the Solaris Network Cache and Accelerator (SNCA) The Solaris Network Cache and Accelerator (SNCA) is a caching server which provides improved web performance to the Solaris Operating Environment. It is available on Solaris 8 (07/01) or later. The steps below tell you how to enable SNCA to work with iplanet Web Server. 4 Sun Fire V100 Server Product Notes May 2002

5 Note Ensure you have the required NCA-specific software patches installed on the server before you continue with this procedure. 1. In the Solaris operating environment, edit the configuration interface file /etc/nca/nca.if and add * to the first non-comment line. This enables SNCA for all network interfaces. 2. Make the following changes to the /etc/nca/ncakmod.conf file: set the status field to enabled set the ncad_status field to enabled 3. Make the following change to the /etc/nca/ncalogd.conf file: set the status field to enabled 4. Reboot the server. The changes you have just made will not take effect until the server is rebooted. 5. In the iplanet Web Server server.xml file, ensure the listen socket on port 80 includes family="nca", as shown below: <LS id="ls1" ip=" " port="80" family="nca" security="off" acceptorthreads="1"> The server must be listening on port 80 for this to work. 6. Restart the server. The changes you have just made will not take effect until the server is rebooted. For more information, go to the URL below. nts.htm Front Bezel There is a blank nameplate built into the bezel, just below the Sun Fire V100 badge. This allows you to easily attach a unique identifier to the server. 5

6 Precautions for Using the System Configuration Card The Sun Fire V100 server contains a memory card (located on the back panel) called the system configuration card. This card contains the system s MAC address, serial number, and other configuration settings. It is designed to be removable so that, if you ever need to replace an entire server, you can transfer the host ID and configuration data onto the new server. This makes the replacement of the server transparent to your network. Caution Never remove the system configuration card when the server is booting or running Solaris. Power the server off or down to standby mode before removing or inserting the system configuration card. Caution Do not handle the system configuration card unless you need to transfer it to another system. If you need to handle it for this reason, avoid contact with the gold terminals on the underside of the card. For information about transferring the system configuration card from one server to another, refer to the Sun Fire V100 Server User s Guide ( ). Open Issues The following sections cover some open issues with the Sun Fire V100 server. 64 Bit Support When installing a system, ensure that the selected install option supports the 64 bit kernel. Note The install option that takes up the least disk space, labelled Core System Support, supports 32 bit operation only and is not compatible with the Sun Fire V100 server. 6 Sun Fire V100 Server Product Notes May 2002

7 Sending Break During Boot Process Can Result In Failure To See Disk On Reset If a break is sent to the system console while the system is booting, there is a small chance of a subsequent failure to detect the boot disk. The prom may report: Boot device: disk File and args: Bad checksum in disk label Can t open disk label package Evaluating: boot Can t open boot device To recover, power the system off for 1 minute and then power it back on. 7

8 No Auto Power-On When Power is Removed and Restored Within 10 Seconds If you disconnect the server from its power source while it is powered on, and then reconnect it within 10 seconds of the disconnection, the server automatically attempts to power on. However, it does not reinitialize successfully and hangs after giving the following console output: LOMlite starting up. CPU type: H8/3437S, mode 3 Ram-test: 2048 bytes OK Initialising i2c bus: OK Searching for EEPROMs: 50(cfg) I2c OK i2c bus speed code OK Probing for lm80s: none Probing for lm75s: 48 Initialising OK System functions: PSUs fans breakers rails gpio temps host CLI ebus clock Unexpected reset LOMlite console lom> LOM event: +0h0m0s LOM FAULT: unexpected reset lom> LOM event: +0h0m0s host power on If your system hangs when you have disconnected power and then restored it within 10 seconds of the disconnection, do either of the following: Type a carriage return and then type the LOM escape sequence (a hash character, followed by a dot: #.). At the LOM prompt, type poweroff. At the next LOM prompt, type poweron. The system will power on. Hold the rocker switch in the OFF position until the console reports the timestamped host power off LOM event, then put the rocker switch into the ON position. The system will then power on. If you have the NVRAM diag-switch? parameter set to true (by default, it is set to false and the console output is as shown above), the system will provide additional, Open Boot PROM output during the boot process. In this case, if you restore power within 10 seconds of removing it, the system hangs after reporting the following message: 8 Sun Fire V100 Server Product Notes May 2002

9 Device a usb To restore power, use either of the two methods described above. Note Any interruption and subsequent restoration of mains power within 10 seconds could cause this fault to occur. Optional Components There is an error on page 4 of the Sun Fire V100 Server User s Guide. The part number for the 512-Mbyte DIMM is incorrectly given as X7084A. The correct part number is X7092A. Hardware Configurations This section contains additional information to that contained in the table on page 108 of the Sun Fire V100 Server User s Guide ( ). The table below gives the configuration information for servers containing the 550 MHz and 650 MHz processor. Processor RAM Hard Disk Drive Sun Part Number 550 MHz 256 MB (1*256 MB) 1*40 GB (7200 rpm) xx 550 MHz 512 MB (2*256 MB) 1*40 GB (7200 rpm) xx 650 MHz 1 GB (4*256 MB) 2*40 GB (7200 rpm) xx 650 MHz 2 GB (4*512 MB) 2*40 GB (7200 rpm) xx 9

10 Operating Power Statistics This section contains additional information to that given in the table on page 117 of the Sun Fire V100 Server User s Guide ( ). The BTU/hr figure for servers containing the 550 MHz and 650 MHz processor is given below. 500/550/650 MHz processor: 148 (min), 280 (max). 10 Sun Fire V100 Server Product Notes May 2002