How to use Linux driver

Transcription

1 How to use Linux driver - 1 -

2 Document Title: How to use Linux driver Version: 1.2 Date: Status: Author Release aaron General Notes SIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCom by the customers. SIMCom has not undertaken any independent search for additional relevant information, including any information that may be in the customer s possession. Furthermore, system validation of this product designed by SIMCom within a larger electronic system remains the responsibility of the customer or the customer s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of SIMCom Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright Shanghai SIMCom Wireless Solutions Ltd

3 Version History Version Chapter Author Comments V1.0 New Version aaron New version V1.1 Chapter 2 aaron We recommend to use the driver option instead of driver generic V1.2 Chapter aaron Add flag for short packet transmission in some case - 3 -

4 Contents General Notes Copyright V e r s i o n H i s t o r y Driver issued by Linux kernel Modify the driver Support system suspend/resume Support low power mode Add short packet flag Build the driver Use the driver Install the driver(driver as module only) Use the driver Remove the driver

5 SCOPE This document is a brief description on: 1. How to build and use the driver on Linux issued by SIMCom in order to use SIMCom devices. 2. How to modify, build and use the driver on Linux issued by Linux kernel in order to use SIMCom devices. 1 Driver issued by Linux kernel In fact the kernel with version of and later has a common driver named usbserial which can also be used by SIMCom device. Succeeding sections will use the kernel code of as an example to depict how to modify, build and use kernel driver for SIMCom device in fail detail. 1.1 Modify the driver One needs to add the vendor ID and product ID of SIMCom to kernel driver in order to support SIMCom device. drivers\usb\serial\option.c: Support system suspend/resume Add.reset_resume call-back function if kernel support, for some USB HOST controller issue a bus reset to USB devices when system resume, USB port will be unloaded, and loaded later, the reset_resume call-back funcion will avoid the port unloading when system resume, for more detail please refer to kernel USB driver - 5 -

6 documents` Support low power mode For kernel , add the follow highlight code to end of option_probe function: For kernel , add the follow highlight code to end of option_probe function: Add short packet flag Since the max packet size of BULK endpoint on SIMCOM module in High USB speed is 512 bytes, in Full USB speed is 64 bytes, in addition the USB protocol says : So one needs to send an zero-length packet additional if one wants to transmit the data stream with length exactly multiple of wmaxpacketsize

7 Fortunately one needs not to send zero packet manually, one only needs to modify a little driver code: drivers\usb\serial\usb_wwan.c: NOTE: This modification is only for the driver option.ko 1.2 Build the driver One needs to setup the kernel development environment first which include kernel source code and cross compiler environment. Following is a step-by-step instruction on how to build the driver into kernel. 1) Use sudo make menuconfig to configure the kernel. 2) Enter into menu Device Drivers - 7 -

8 3) Continue enter into menu USB support 4) Continue enter into menu USB Serial Converter support - 8 -

9 5) Type y to select menu USB driver for GSM and CDMA modems, of course one can type m to compile the driver as a module. 6) Some other options need to be configured, so please enter into menu Device Drivers -> Generic Driver Options - 9 -

10 7) Type y to select the following two options. 8) Exit and save the configuration

11 After configuration, these items will be configured: CONFIG_USB = y CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_OPTION=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y 2) Use sudo make to compile the kernel or use sudo make modules to compile the driver as a module 1.3 Use the driver As you move through this chapter new kernel firmware or new driver: option.ko(compiled as module) is ready Install the driver(driver as module only) If one compiles the driver as a module one needs to install it first. one can use the following command to install the driver: modprobe option.ko This command will install all the needed drivers

12 If all right the driver will be installed to the system, one can use the following command to query the result: lsmod grep option Note: this installation procedure is invalid when rebooting the system, so if one wants to install the driver automatically when starting the system, one should better put the installation instruction to the startup script Use the driver After the driver installed one can use SIMCom device via the driver, now plug the SIMCom device to the host device via USB connector, and if the device is identified by the driver, 5 device files named ttyusb0, ttyusb1, ttyusb2, ttyusb3 and ttyusb4 will be created in directory /dev The relationship between the device files and SIMCom composite device is like this: Device file SIMCom composite device ttyusb0 DIAG interface ttyusb1 NMEA interface ttyusb2 ATCOM interface ttyusb3 MODEM interface ttyusb4 Wireless Ethernet Adapter interface SIMCom device is plugged in: Device files are created:

13 NOTE: 1 In some composite devices of SIMCom not all of the interfaces are existed, so the relationship is dynamic. 2 Only the NMEA, ATCOM and MODEM interface can be worked correctly with this driver. If one gets the device files ready one can use tools such as minicom, wvdial etc to use the device ATCOM interface

14 NMEA interface Remove the driver One can use the following command to uninstall the driver: rmmod option After removed one can use lsmod grep option to check if the driver has been removed correctly. Note: when removing the driver one must disconnect the device and close all the tools using the device first