Simulator for H8/300, H8/300H and H8S

Transcription

1 Simulator for H8/300, H8/300H and H8S TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents... TRACE32 Instruction Set Simulators... Simulator for H8/300, H8/300H and H8S... 1 TRACE32 Simulator License... 4 Quick Start of the Simulator... 5 Peripheral Simulation... 7 Troubleshooting... 8 FAQ... 8 Basics... 9 Specific SYStem Commands SYStem.CONFIG Configure debugger according to target topology 10 SYStem.CPU CPU type 10 SYStem.CpuAccess Run-time memory access (intrusive) 10 SYStem.LOCK Lock and tristate the debug port 11 SYStem.MemAccess Real-time memory access (non-intrusive) 11 SYStem.Mode Establish the communication with the simulator 12 SYStem.Option Advanced Advanced addressing mode 12 SYStem.Option EXR EXR mode setting 13 SYStem.Option IMASKASM Disable interrupts while single stepping 13 SYStem.Option IMASKHLL Disable interrupts while HLL single stepping 13 Memory Classes Support Available Tools 15 Compilers 20 Compilers H8-300H 20 Compilers H8S 20 Target Operating Systems 21 3rd-Party Tool Integrations 21 Products Product Information 23 Order Information 23 Simulator for H8/300, H8/300H and H8S 1

2 Simulator for H8/300, H8/300H and H8S 2

3 Simulator for H8/300, H8/300H and H8S Version 22-Mar-2018 All general commands are described in the IDE Reference Guide (ide_ref.pdf) and General Commands Reference. Simulator for H8/300, H8/300H and H8S 3

4 TRACE32 Simulator License [build DVD 02/2016] The extensive use of the TRACE32 Instruction Set Simulator requires a TRACE32 Simulator License. For more information, see Simulator for H8/300, H8/300H and H8S 4

5 Quick Start of the Simulator To start the simulator, proceed as follows: 1. Select the device prompt for the Debugger and reset the system. B:: RESet The device prompt B:: is normally already selected in the command line. If this is not the case, enter B:: to set the correct device prompt. The RESet command is only necessary if you do not start directly after booting TRACE Specify the CPU specific settings. SYStem.CPU <cpu_name> The default values of all other options are set in such a way that it should be possible to work without modification. Please consider that this is probably not the best configuration for your target. Simulator for H8/300, H8/300H and H8S 5

6 3. Enter debug mode. SYStem.Up This command resets the CPU and enters debug mode. After this command is executed it is possible to access memory and registers. 4. Load the program. Data.LOAD.format <filename> ; load program and symbols The format of the Data.LOAD command depends on the file format generated by the compiler. Refer to Supported Compilers to find the command that is necessary for your compiler. A detailed description of the Data.LOAD command and all available options is given in the reference guide. 5. Start-up example A typical start sequence is shown below. This sequence can be written to a PRACTICE script file (*.cmm, ASCII file format) and executed with the command DO <filename>. B:: WinCLEAR SYStem.CPU <cpu_name> SYStem.Up Data.LOAD.format <filename> Register.Set pc main PER.view ; Select the device prompt ; Clear all windows ; Select CPU type ; Reset the target and enter ; debug mode ; Load the application ; Set the PC to function main ; Show clearly arranged peripherals ; in window *) Data.List ; Open source code window *) Register /SpotLight ; Open register window *) Frame.view /Locals /Caller Var.Watch %Spotlight flags ast ; Open the stack frame with ; local variables *) ; Open watch window for ; variables *) *) These commands open windows on the screen. The window position can be specified with the WinPOS command. Simulator for H8/300, H8/300H and H8S 6

7 Peripheral Simulation For more information, see API for TRACE32 Instruction Set Simulator (simulator_api.pdf). Simulator for H8/300, H8/300H and H8S 7

8 Troubleshooting No information available. FAQ No information available Simulator for H8/300, H8/300H and H8S 8

9 Basics tbd. Simulator for H8/300, H8/300H and H8S 9

10 Specific SYStem Commands SYStem.CONFIG Configure debugger according to target topology The SYStem.CONFIG commands have no effect on the simulator. They are only provided to allow the user to run PRACTICE scripts written for the debugger within the simulator without modifications. SYStem.CPU CPU type Format: SYStem.CPU <type> <mode>: H83001 H83002 Selects the processor type. The ROM monitor software requires also a modification in the configuration table for different processor types. SYStem.CpuAccess Run-time memory access (intrusive) Format: SYStem.CpuAccess Enable Denied Nonstop Default: Denied. Enable Allow intrusive run-time memory access. Since a non-intrusive run-time memory access (SYStem.MemoryAccess CPU) is available for all TRACE32 instruction set simulators, there is no need for an intrusive run-time memory access. Simulator for H8/300, H8/300H and H8S 10

11 Denied Nonstop Lock intrusive run-time memory access. Lock all features of the debugger that affect the run-time behavior. Nonstop reduces the functionality of the debugger to: run-time access to memory and variables trace display The debugger inhibits the following: to stop the program execution all features of the debugger that are intrusive (e.g. action Spot for breakpoints, performance analysis via StopAndGo mode, conditional breakpoints etc.) SYStem.LOCK Lock and tristate the debug port Format: SYStem.LOCK [ON OFF] Default: OFF. If the system is locked, no access to the debug port will be performed by the debugger. While locked, the debug connector of the debugger is tristated. The main intention of the lock command is to give debug access to another tool. The command has no effect for the simulator. SYStem.MemAccess Real-time memory access (non-intrusive). Format: SYStem.MemAccess CPU Denied <cpu_specific> SYStem.ACCESS (deprecated) CPU Denied (default) Real-time memory access during program execution to target is enabled. Real-time memory access during program execution to target is disabled. Simulator for H8/300, H8/300H and H8S 11

12 SYStem.Mode Establish the communication with the simulator Format: SYStem.Mode <mode> <mode>: Down NoDebug Go Up Default: Down. Selects the target operating mode. Down NoDebug Go Up The CPU is in reset. Debug mode is not active. Default state and state after fatal errors. The CPU is running. Debug mode is not active. Debug port is tristate. In this mode the target should behave as if the debugger is not connected. The CPU is running. Debug mode is active. After this command the CPU can be stopped with the break command or if any break condition occurs. The CPU is not in reset but halted. Debug mode is active. In this mode the CPU can be started and stopped. This is the most typical way to activate debugging. If the mode Go is selected, this mode will be entered, but the control button in the SYStem.state window jumps to the mode Up. SYStem.Option Advanced Advanced addressing mode Format: SYStem.Option Advanced [ON OF] Defines the address mode of the CPU. off on Normal address mode (64K). Advanced address mode (16M). Simulator for H8/300, H8/300H and H8S 12

13 SYStem.Option EXR EXR mode setting Format: SYStem.Option EXR [ON OFF] TBD SYStem.Option IMASKASM Disable interrupts while single stepping Format: SYStem.Option IMASKASM [ON OFF] Default: OFF. If enabled, the interrupt mask bits of the CPU will be set during assembler single-step operations. The interrupt routine is not executed during single-step operations. After single step the interrupt mask bits are restored to the value before the step. SYStem.Option IMASKHLL Disable interrupts while HLL single stepping Format: SYStem.Option IMASKHLL [ON OFF] Default: OFF. If enabled, the interrupt mask bits of the CPU will be set during HLL single-step operations. The interrupt routine is not executed during single-step operations. After single step the interrupt mask bits are restored to the value before the step. Simulator for H8/300, H8/300H and H8S 13

14 Memory Classes Memory Class D P Description Data Program Simulator for H8/300, H8/300H and H8S 14

15 Support Available Tools CPU ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR H8/3006 YES YES YES YES H8/3007 YES YES YES YES H8/3008 YES YES YES H8/3044 YES YES YES H8/3045 YES YES YES H8/3046 YES YES YES H8/3047 YES YES YES H8/3048 YES YES YES H8/3052 YES YES YES H8/3060 YES YES YES YES H8/3061 YES YES YES YES H8/3062 YES YES YES YES H8/3064 YES YES YES YES H8/3065 YES YES YES YES H8/3066 YES YES YES YES H8/3067 YES YES YES YES H8/3068 YES YES YES H8/3101 YES YES H8/3102 YES YES H8/3202 YES YES H8/3212 YES YES H8/3214 YES YES H8/3216 YES YES H8/3217 YES YES H8/322 YES YES H8/323 YES YES H8/324 YES YES H8/325 YES YES H8/3256 YES YES H8/3257 YES YES H8/326 YES YES H8/327 YES YES H8/328 YES YES H8/329 YES YES Simulator for H8/300, H8/300H and H8S 15

16 CPU H8/3292 YES YES H8/3294 YES YES H8/3296 YES YES H8/3297 YES YES H8/330 YES YES H8/3334Y YES YES H8/3334YF YES YES H8/3336Y YES YES H8/3337Y YES YES H8/336 YES YES H8/337 YES YES H8/338 YES YES H8/3394 YES YES H8/3396 YES YES H8/3397 YES YES H8/3434 YES YES H8/3434F YES YES H8/3436 YES YES H8/3437 YES YES H8/350 YES YES H8/36014 YES YES H8/3640 YES YES H8/3641 YES YES H8/3642 YES YES H8/3643 YES YES H8/3644 YES YES H8/3664 YES YES H8/3672 YES YES H8/3687 YES YES H8/3694 YES YES H8/3812 YES YES H8/3813 YES YES H8/3833 YES YES H8/3834 YES YES H8/3835 YES YES H8/3836 YES YES H8/3837 YES YES H8S/2120 YES YES YES H8S/2122 YES YES YES H8S/2123 YES YES YES H8S/2124 YES YES YES Simulator for H8/300, H8/300H and H8S 16 ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR

17 CPU H8S/2126 YES YES YES H8S/2127 YES YES YES H8S/2128 YES YES YES H8S/2130 YES YES YES H8S/2132 YES YES YES H8S/2133 YES YES YES H8S/2134 YES YES YES H8S/2137 YES YES YES H8S/2138 YES YES YES H8S/2142 YES YES YES H8S/2143 YES YES YES H8S/2144 YES YES YES H8S/2147 YES YES YES H8S/2148 YES YES YES H8S/2214 YES YES YES H8S/2223 YES YES YES H8S/2225 YES YES YES H8S/2227 YES YES YES H8S/2233 YES YES YES H8S/2235 YES YES YES H8S/2236 YES YES YES H8S/2237 YES YES YES H8S/2238 YES YES YES H8S/2240 YES YES YES H8S/2241 YES YES YES H8S/2242 YES YES YES H8S/2243 YES YES YES H8S/2244 YES YES YES H8S/2245 YES YES YES H8S/2246 YES YES YES H8S/2310 YES YES YES H8S/2311 YES YES YES H8S/2312 YES YES YES H8S/2316 YES YES YES H8S/2318 YES YES YES H8S/2319 YES YES YES YES H8S/2320 YES YES YES H8S/2322 YES YES YES H8S/2323 YES YES YES H8S/2324 YES YES YES H8S/2327 YES YES YES Simulator for H8/300, H8/300H and H8S 17 ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR

18 CPU H8S/2328 YES YES YES H8S/2329 YES YES YES YES H8S/2332 YES YES YES H8S/2337 YES YES YES H8S/2338 YES YES YES H8S/2339 YES YES YES YES H8S/2340 YES YES YES H8S/2341 YES YES YES H8S/2343 YES YES YES H8S/2345 YES YES YES H8S/2350 YES YES YES H8S/2351 YES YES YES H8S/2352 YES YES YES H8S/2353 YES YES YES H8S/2355 YES YES YES H8S/2357 YES YES YES H8S/2367 YES YES YES H8S/2368 YES YES YES H8S/2377 YES YES YES H8S/2378 YES YES YES H8S/2612 YES YES YES H8S/2621 YES YES YES H8S/2622 YES YES YES H8S/2623 YES YES YES H8S/2626 YES YES YES H8S/2631 YES YES YES H8S/2632 YES YES YES H8S/2633 YES YES YES H8S/2636 YES YES YES H8S/2639 YES YES YES H8S/2646 YES YES H8S/2653 YES YES YES H8S/2655 YES YES YES H8SX/1642 YES YES YES H8SX/1644 YES YES YES H8SX/1648 YES YES YES H8SX/1648G YES YES YES H8SX/1648H YES YES YES H8SX/1663 YES YES YES ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR Simulator for H8/300, H8/300H and H8S 18

19 CPU H8SX/1664 YES YES YES H8SX/1668 YES YES YES H8SX/1668M YES YES YES H8SX/1668R YES YES YES H8SX/1725 YES YES YES ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR Simulator for H8/300, H8/300H and H8S 19

20 Compilers Compilers H8-300H Language Compiler Company Option Comment C GNU-C Free Software COFF H8/300H Foundation, Inc. C IARH8 IAR Systems AB UBROF H8/300H C CH38 Renesas Technology, SYSROF H8/300H Corp. C++ GNU-C++ Free Software Foundation, Inc. COFF H8/300H Compilers H8S Language Compiler Company Option Comment C ICCH8 IAR Systems AB UBROF H8S C CH38 Renesas Technology, SYSROF H8S Corp. C++ GNU Free Software COFF Foundation, Inc. C++ CH38 Renesas Technology, Corp. SYSROF Target Operating Systems Company Product Comment CMX Systems Inc. CMX-RTX CMX Systems Inc. CMX-TINY freertos FreeRTOS up to v9 Mentor Graphics Nucleus Corporation Vector oscan via ORTI - OSEK via ORTI Elektrobit Automotive ProOSEK via ORTI GmbH Quadros Systems Inc. RTXC 3.2 Simulator for H8/300, H8/300H and H8S 20

21 3rd-Party Tool Integrations CPU Tool Company Host WINDOWS CE PLATF. - Windows BUILDER CODE::BLOCKS - - C++TEST - Windows ADENEO - X-TOOLS / X32 blue river software GmbH Windows CODEWRIGHT Borland Software Windows Corporation CODE CONFIDENCE Code Confidence Ltd Windows TOOLS CODE CONFIDENCE Code Confidence Ltd Linux TOOLS EASYCODE EASYCODE GmbH Windows ECLIPSE Eclipse Foundation, Inc Windows CHRONVIEW Inchron GmbH Windows LDRA TOOL SUITE LDRA Technology, Inc. Windows UML DEBUGGER LieberLieber Software Windows GmbH SIMULINK The MathWorks Inc. Windows ATTOL TOOLS MicroMax Inc. Windows VISUAL BASIC Microsoft Corporation Windows INTERFACE LABVIEW NATIONAL Windows INSTRUMENTS Corporation RAPITIME Rapita Systems Ltd. Windows RHAPSODY IN MICROC IBM Corp. Windows RHAPSODY IN C++ IBM Corp. Windows DA-C RistanCASE Windows TRACEANALYZER Symtavision GmbH Windows ECU-TEST TraceTronic GmbH Windows UNDODB Undo Software Linux TA INSPECTOR Vector Windows VECTORCAST UNIT Vector Software Windows TESTING VECTORCAST CODE COVERAGE Vector Software Windows Simulator for H8/300, H8/300H and H8S 21

22 Products Product Information OrderNo Code LA-8808 SIM-H8 Text TRACE32 Instruction Set Simulator for H8/H8S TRACE32 Instruction Set Simulator Order Information Order No. Code Text LA-8808 SIM-H8 TRACE32 Instruction Set Simulator for H8/H8S Simulator for H8/300, H8/300H and H8S 22