ISO INTERNATIONAL STANDARD. Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues

Transcription

1 INTERNATIONAL STANDARD ISO First edition Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues Exigences ergonomiques pour travail de bureau avec terminaux à écrans de visualisation (TEV) Partie 16: Dialogues de type manipulation directe A Reference number ISO :1999(E)

2 ISO :1999(E) Contents Page 1 Scope Normative references Terms and definitions Application of this part of ISO Appropriateness of direct manipulation dialogues Applying the recommendations Evaluation of products General information Metaphors Appearance of objects used in direct manipulation Feedback Input devices Manipulation of objects General considerations Pointing and selecting Dragging Sizing of objects Rotating Additional recommendations for direct manipulation of text objects Pointing and selecting Sizing of text Additional recommendations for direct manipulation of windows General considerations...17 ISO 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 CH-1211 Genève 20 Switzerland Internet iso@iso.ch Printed in Switzerland ii

3 ISO ISO :1999(E) 8.2 Pointing and selecting Sizing of windows Additional recommendations for direct manipulation of control icons Pointing and selecting Annex A (informative) Sample procedure for assessing applicability and adherence Bibliography iii

4 ISO :1999(E) ISO Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. This part of ISO 9241 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 4, Ergonomics of human-system interaction. ISO 9241 consists of the following parts, under the general title Ergonomic requirements for office work with visual display terminals (VDTs): Part 1: General introduction Part 2: Guidance on task requirements Part 3: Visual display requirements Part 4: Keyboard requirements Part 5: Workstation layout and postural requirements Part 6: Guidance on the work environment Part 7: Requirements for display with reflections Part 8: Requirements for displayed colours Part 9: Requirements for non-keyboard input devices Part 10: Dialogue principles Part 11: Guidance on usability Part 12: Presentation of information Part 13: User guidance Part 14: Menu dialogues Part 15: Command dialogues Part 16: Direct manipulation dialogues Part 17: Form filling dialogues Annex A of this part of ISO 9241 is for information only. iv

5 ISO ISO :1999(E) Introduction ISO 9241 deals with several aspects of the use of visual display terminals (VDTs). Currently, the individual parts can be grouped in the following categories: ISO : General introduction ISO : Guidance on task requirements ISO and ISO : Workstation and environment ISO , ISO , ISO , ISO and ISO : Ergonomics pertaining to hardware ISO through ISO : Ergonomics pertaining to software interfaces This part of ISO 9241 is concerned with the ergonomic design of direct manipulation dialogues where users perform operations by acting on displayed objects in ways analogous to manipulating physical entities. This part of ISO 9241 serves the following types of user a) the user interface designer, who will apply this part of ISO 9241 during the development process; b) the buyer, who will reference this part of ISO 9241 during the product procurement process; c) evaluators responsible for ensuring that products meet the recommendations in this part of ISO 9241; d) designers of user interface development tools to be used by interface designers; e) end-users who will gain from the potential benefits provided by this part of ISO This part of ISO 9241 consists of a number of recommendations, some of which are conditional, concerning direct manipulation dialogues. Conditional recommendations are recommendations that should be met only within the specific context for which they are relevant (e.g. particular kinds of users, tasks, environments, technology). It should be noted that ISO describes dialogue principles that are relevant for the design of direct manipulation dialogues. These principles provide the designer and evaluator with additional information concerning the ergonomic rationale for the various recommendations in this part of ISO 9241 and, therefore, assist in making trade-offs. However, it may be necessary to base trade-offs on other considerations as well. v

6

7 INTERNATIONAL STANDARD ISO ISO :1999(E) Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues 1 Scope This part of ISO 9241 provides guidance on the design of direct manipulation dialogues. In direct manipulation dialogues the user directly acts on objects on the screen; for example, by pointing at them, moving them and/or changing their physical characteristics (or values) via the use of an input device. Such objects are typically concrete, often graphical, representations of abstract software structures or capabilities and generally fall into two categories. a) Task object a metaphorical representation of a real-world artefact manipulated to support the user s task (e.g. a sheet of paper, pen, spanner, graph). b) Interface object an object introduced into the interface so that the user can perform tasks related to the use of the computer application or system. This introduced object may be a real-world object but the metaphor is not directly related to the user s real work task (e.g. button, slider, window, screen). Objects and their representations on the display are referred to as objects, except where it is necessary to make a clear distinction. Interfaces that use stereoscopic or virtual reality-type interfaces are not covered in this part of ISO In practice, the term direct manipulation is often used interchangeably with graphical user interfaces (GUIs). However, within GUIs other dialogue techniques, such as menu dialogues or command dialogues, are often implemented as well. Though GUIs can provide many direct manipulation features, not every user input in GUIs can be interpreted as direct manipulation. For example, printing a document by moving a document icon upon a printer icon implies a higher degree of direct manipulation than a mouse click on a push button labelled "print". This part of ISO 9241 covers usability issues of direct manipulation dialogues. Recommendations on GUI components are given only if they are related specifically to features of direct manipulation. Features of direct manipulation dialogues such as step-by-step input may be inefficient (e.g., if one wishes to delete all files starting with "d"). Therefore, other interaction techniques; for example, command input or menus, may be more appropriate and are typically used to supplement direct manipulation. 1

8 ISO :1999(E) ISO 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 9241 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO :1998, Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information. ISO :1998, Ergonomic requirements for office work with visual display terminals (VDTs) Part 13: User guidance. ISO :1997, Ergonomic requirements for office work with visual display terminals (VDTs) Part 14: Menu dialogues. ISO/IEC : 1), Information technology User System Interfaces Icon symbols and functions Part 1: Icons General. ISO/IEC : 1), Information technology User System Interfaces Icon symbols and functions Part 2: Object icons. ISO/IEC : 1), Information technology User System Interfaces Icon symbols and functions Part 3: Pointers. 3 Terms and definitions For the purposes of this part of ISO 9241, the following terms and definitions apply. 3.1 attribute property of an object or its representation (e.g. colour) which may be modified by user actions in certain contexts 3.2 choice list list containing a number of items which a user can select NOTE dialogue. Single selection or multiple selection may be possible. The number of items may be fixed or may change during the 3.3 clicking operation of pressing and immediately releasing a button on a pointing device without moving the pointer off the selected input-sensitive area 3.4 control graphic, often analogous to physical controls such as dials, radio buttons, which allows a user to directly manipulate data, other objects or their attributes 1) To be published. 2