University of Sunderland. Microsoft Word 2007

Size: px
Start display at page:

Download "University of Sunderland. Microsoft Word 2007"

Transcription

1 Microsoft Word /10/2008

2 Word 2007 Ribbons you first start some of the programs in 2007 Microsoft Office system, you may be surprised by what you see. The menus and toolbars in some programs have been replaced with the Ribbon, which is part of the Microsoft Office Fluent user interface. The Ribbon as it appears in Microsoft Office Word 2007 The Ribbon is designed to help you quickly find the commands that you need to complete a task. Commands are organized in logical groups, which are collected together under tabs. Each tab relates to a type of activity, such as writing or laying out a page. To reduce clutter, some tabs are shown only when needed. For example, the Picture Tools tab is shown only when a picture is selected. Quick Access Toolbar The Quick Access Toolbar is a customizable toolbar containing a set of commands that are independent of the tab that is currently displayed. The Quick Access Toolbar can be located in one of two places: Upper-left corner next to the Microsoft Office Button (default location) Below the Ribbon, which is part of the Microsoft Office Fluent user interface 2

3 If you don't want the Quick Access Toolbar to be displayed in its current location, you can move it to the other location. If you find that the default location next to the Microsoft Office Button is too far from your work area to be convenient, you may want to move it closer to your work area. The location below the Ribbon encroaches on the work area. Therefore, if you want to maximize the work area, you may want to keep the Quick Access Toolbar in its default location. 1. Click Customize Quick Access Toolbar. 2. In the list, click Show Below the Ribbon. Add a command to the Quick Access Toolbar You can add a command to the Quick Access Toolbar directly from commands that are displayed on the Office Fluent Ribbon. 1. On the Ribbon, click the appropriate tab or group to display the command that you want to add to the Quick Access Toolbar. 2. Right-click the command, and then click Add to Quick Access Toolbar on the shortcut menu. NOTES You cannot increase the size of the buttons representing the commands by an option in Microsoft Office. The only way to increase the size of the buttons is to lower the screen resolution you use. 3

4 You cannot display the Quick Access Toolbar on multiple lines. Only commands can be added to the Quick Access Toolbar. The contents of most lists, such as indent and spacing values and individual styles, which also appear on the Ribbon, cannot be added to the Quick Access Toolbar. Dialogue Box You can view the dialogue box of Word 2003 for certain functions. Click on the icon from the ribbon. 4

5 New XP 2007 Open a blank document 1. Click the Microsoft Office Button, and then click New. 2. Double-click Blank document. Start a document from a template To use a template as a starting point, do one of the following: 1. Click the Microsoft Office Button, and then click New. 2. Under Templates, do one of the following: Click Installed Templates to select a template that is available on your computer. Click one of the links under Microsoft Office Online, such as Flyers or Letters and Letterhead. NOTE To download a template that is listed under Microsoft Office Online, you must be connected to the Internet. 3. Double-click the template that you want. 5

6 Open XP 2007 Open a file 1. Click the Microsoft Office Button, and then click Open. Important If you don't see the Microsoft Office Button, click Open on the File menu. Keyboard shortcut To display the Open dialog box, press CTRL+O. 2. In the Look in list or Navigation pane, click the folder, drive, removable media (such as flash drive, CD, or DVD), or Internet location that contains the file that you want to open. Note By default, the files that you see in the Open dialog box are only those files that are created by the program that you are using. For example, if you are using Microsoft Office Excel, you do not see files that are created by using Microsoft Office Word unless you click All Files in the Files of type box. 3. Click the file, and then click Open. Open a file as a copy When you open a file as a copy, the program creates a duplicate of the file, and you look at the duplicate. Any changes that you make are saved to the copy. The program gives the copy a new name. The default is to add Copy (1) of to the beginning of the file name. 1. Click the Microsoft Office Button, and then click Open. Important If you don't see the Microsoft Office Button, click Open on the File menu. 6

7 Keyboard shortcut To display the Open dialog box, press CTRL+O. 2. In the Look in list or Navigation pane, click the folder, drive, removable media (such as flash drive, CD, or DVD), or Internet location that contains the file that you want to open. 3. Click the file that you want to open a copy of. 4. Click the arrow next to the Open button, and then click Open as Copy. Note When you open a file as a copy, a new copy of the file is created in the folder that contains the original file. Open a file as read-only When you open a file as read-only, you are looking at the original file, but you cannot save changes to it. 1. Click the Microsoft Office Button, and then click Open. Keyboard shortcut To display the Open dialog box, press CTRL+O. 2. In the Look in list or Navigation pane, click the folder, drive, removable media (such as flash drive, CD, or DVD), or Internet location that contains the file that you want to open. 3. Click the file that you want to open as read-only. 4. Click the arrow next to the Open button, and then click Open Read-Only. Notes Using Microsoft Windows XP, to create a shortcut to a folder on a network file server, Web server, or removable media (such as flash drive, CD, or DVD), use My Network Places on the My Places bar in the Open dialog box. Using Windows Vista, to create a shortcut to a folder on a network file server, Web server, or removable media removable media (such as flash drive, CD, or DVD), use Navigation pane in the Open dialog box. The Recently used files list on the File menu or the Recent Documents list available when you click the Microsoft Office Button displays a list of the last few files that you opened. Click the file name to open the file. The My Recent Documents folder in the Open dialog box lists the previous files and folders that you have opened. 7

8 Save XP 2007 Save As XP 2007 Save a file By default, the Microsoft Office programs save a file in a default working folder. If you want, you can specify a different location. 1. Click the Microsoft Office Button, and then click Save. Important If you don't see the Microsoft Office Button, click Save on the File menu. Keyboard shortcut To save the file, press CTRL+S. 2. If you are saving the file for the first time, you are asked to give it a name. 8

9 Save a file for use in an earlier version of Office Microsoft Word 2007 If you are using the 2007 Office release, you can share your files with people using an earlier version of Microsoft Office by saving your file in the file formats. For example, you can save your Microsoft Office Word 2007 document (.docx) as a document (.doc). Save a copy of a file (Save As command) You can also use the Save As command to rename a file or change the location of where you save the file. Save As dialog box in Windows Vista You can also save the file to a new location by using the Navigation pane. 1. To choose a folder or type a path to the folder, use the Address bar. 2. To quickly see locations you use a lot, use the Navigation pane. 3. To see more file types, click the arrow. 9

10 Save As dialog box in Microsoft Windows XP You can also save the file to a new location by using the Save in list or locations saved in your My Places bar. 1. To choose a folder, use the Save in list. 2. To quickly see locations you use a lot, use the My Places bar. 3. To see more file types, click the arrow. Save AutoRecover information automatically AutoRecover does not replace regularly saving your files. If you choose not to save the recovery file after you open it, the file is deleted, and your unsaved changes are lost. If you save the recovery file, it replaces the original file (unless you specify a new file name). The more frequently your files are saved, the more information is recovered if there is a power failure or other problem while a file is open. 1. Click the Microsoft Office Button, and then click Word Options. 2. Click Save. 3. Select the Save AutoRecover information every check box. 4. In the minutes box, type or select a number to determine how often you want to save files. 10

11 Text Formatting XP 2007 Preview font formatting changes 1. Select the text that you want to format. 2. On the Home tab, in the Font group, do any of the following: Click the arrow next to the Font box, and then move the pointer over the fonts that you want to preview. Click the arrow next to the Font Size box, and then move the pointer over the font sizes that you want to preview. Click the arrow next to the Text Highlight Color button, and then move the pointer over the highlight or fill colors that you want to preview. Click the arrow next to the Font Color button, and then move the pointer over the font colors that you want to preview. 3. When you finish previewing the formatting choices, do one of the following: To apply the previewed formatting, click the selected font name, font size, or colour in the list. To cancel live previewing without applying any changes, press ESC. Preview paragraph formatting changes 1. Select the text that you want to format. 2. On the Home tab, in the Paragraph group, do any of the following: Click the arrow next to the Bullets button, and then move the pointer over the bulleted list styles that you want to preview. Click the arrow next to the Numbering button, and then move the pointer over the numbered list styles that you want to preview. Click the arrow next to the Shading button (Office Word 2007 only), and then move the pointer over the shading colors that you want to preview. 3. When you finish previewing the formatting choices, do one of the following: 11

12 To apply the previewed formatting, click the selected paragraph style or colour in the list. To cancel live previewing without applying any changes, press ESC. Preview Quick Style formatting changes 1. Select the text or paragraph that you want to format. 2. On the Home tab, in the Styles group, do any of the following: In the Quick Styles gallery, move the pointer over any of the styles that you want to preview. Tip Click the More arrow to view and preview additional choices. Click Change Styles, point to Style Set, and then move the pointer over any of the choices in the list. 3. When you finish previewing the formatting choices, do one of the following: To apply the previewed formatting, click the selected style in the list. To cancel live previewing without applying any changes, press ESC. Turn on or off Live Preview 1. Click the Microsoft Office Button, and then click Word Options. 2. Click Popular, and then select or clear the Enable Live Preview check box. Note By default, the Live Preview feature is turned on in all 2007 Microsoft Office system programs that support it. Each program remembers your Live Preview preference independently from the other programs. For example, you can choose to turn off Live Preview in Office PowerPoint 2007 and leave it turned on in Office Word

13 Headers & Footers XP 2007 Insert or change the headers or footers You can insert predesigned headers or footers in your document and easily change the header and footer designs. Or you can create your own header or footer with a company logo and custom look, and save the new header or footer to the gallery. Insert the same header and footer throughout a document 1. On the Insert tab, in the Header & Footer group, click Header or Footer. 2. Click the header or footer design that you want. The header or footer is inserted on every page of the document. 13

14 NOTE If necessary, you can format text in the header or footer by selecting the text and using the formatting options on the Mini toolbar. Insert text or graphics in a header or footer and save it to the gallery 1. On the Insert tab, in the Header & Footer group, click Header or Footer. 2. Click Edit Header or Edit Footer. 3. Insert text or graphics. 4. To save the header or footer that you created to the gallery of header or footer options, select the text or graphics in the header or footer, and then click Save Selection as New Header or Save Selection as New Footer. Change headers or footers 1. On the Insert tab, in the Header & Footer group, click Header or Footer. 2. Click a header or footer design from the gallery. The header or footer design changes for the entire document. Remove the header or footer from the first page 1. On the Page Layout tab, click the Page Setup Dialog Box Launcher, and then click the Layout tab. 2. Select the Different first page check box under Headers and footers. Headers and footers are removed from the first page of the document. Make the headers or footers different for odd and even pages For example, you might choose to use the title of the document on odd pages, and the chapter title on even pages. 14

15 1. On the Page Layout tab, click the Page Setup Dialog Box Launcher, and then click the Layout tab. 2. Select the Different odd and even check box. Now you can insert the header or footer for even pages on an even page and the header or footer for odd pages on an odd page. Change the contents of a header or footer 1. On the Insert tab, in the Header & Footer group, click Header or Footer. 2. Make your changes to the header or footer by selecting the text and revising it or by using the options on the Mini toolbar to format the text. For example, you can change the font, apply bold format, or apply a different font colour. TIP In Print Layout view, you can quickly switch between the header or footer and the document text. Just double-click the dimmed header or footer or the dimmed document text. Remove the headers or footers 1. Click anywhere in the document. 2. On the Insert tab, in the Header & Footer group, click Header or Footer. 3. Click Remove Header or Remove Footer. The header or footers are removed from the entire document. Working with headers and footers in a document with multiple sections In a document with sections, you can insert, change, and remove different headers and footers for each section. Or you can use the same header or footer for all of the sections. If you are unsure whether your document has sections, click Draft on the status bar. On the Home tab, in the Find group, click Go To. Click Section, and then click Next to find any section breaks in the document. 15

16 To create section breaks, click where you want to place a section in the document. On the Page Layout tab, in the Page Setup group, click Breaks. Create a different header or footer for part of a document 1. Click in the section for which you want to create a different header or footer. 2. On the Insert tab, in the Header & Footer group, click Header or Footer. 3. Click Edit Header or Edit Footer. 4. On the Headers & Footers tab, in the Navigation group, click Link to Previous to break the connection between the header and footer in the new section and the previous section. Microsoft Office Word 2007 does not display Same as Previous in the upper-right corner of the header or footer. 5. Change the existing header or footer, or create a new header or footer for this section. Use the same headers and footers in each document section 1. Double-click the header or footer that you want to make the same as the header or footer in the previous section. 2. On the Headers & Footers tab, in the Navigation group, click Previous or next to move to the header or footer that you want to change. 3. Click Link to Previous to reconnect the header and footer in the current section to those in the previous section. 4. Office Word 2007 will ask if you want to delete the header and footer and connect to the header and footer in the previous section. Click Yes. Make the headers or footers different for odd and even pages For example, you might choose to use the title of the document on odd pages, and the chapter title on even pages. 1. On the Insert tab, in the Header & Footer group, click Header or Footer. 16

17 2. Click Edit Header or Edit Footer. 3. On the Headers & Footers tab, in the Options group, select the Different odd and even check box. 4. If necessary, in the Navigation group, click Previous or Next to move into the odd or even header or footer areas. 5. Create the header or footer for odd-numbered pages in the Odd Page Header or Odd Page Footer area. Create the header or footer for even-numbered pages in the Even Page Header or Even Page Footer area. 17

18 Table XP 2007 Insert a table by using Quick Tables 1. Click where you want to insert a table. 2. On the Insert tab, in the Tables group, click Table. 3. Point to Quick Tables, and then click the table that you want. 4. If necessary, replace the placeholder data in the table with the data that you want. 18

19 Add a table to the Quick Tables Gallery Microsoft Word Click in the table that you want to add. 2. Under Table Tools, click the Layout tab. 3. In the Table group, click Select, and then click Select Table. 4. On the Insert tab, in the Tables group, click Table. 5. Point to Quick Tables, and then click Save Selection to Quick Tables Gallery. 6. Fill out the information in the Create New Building Block dialog box: Use Table Styles to format an entire table After you create a table, you can format the entire table by using Table Styles. By resting your pointer over each of the preformatted table styles, you can preview what the table will look like. 1. Click in the table that you want to format. 2. Under Table Tools, click the Design tab. 3. In the Table Styles group, rest the pointer over each table style until you find a style that you want to use. NOTE To see more styles, click the More arrow. 4. Click the style to apply it to the table. 5. In the Table Style Options group, select or clear the check box next to each the table element to apply or remove the selected style. Add or remove borders You can add or remove borders to format a table the way that you want. Add table borders 1. Under Table Tools, click the Layout tab. 2. In the Table group, click Select, and then click Select Table. 3. Under Table Tools, click the Design tab. 4. In the Table Styles group, click Borders, and then do one of the following: 19

20 Click one of the predefined border sets. Click Borders and Shading, click the Borders tab, and then choose the options that you want. Remove table borders from the whole table 1. Under Table Tools, click the Layout tab. 2. In the Table group, click Select, and then click Select Table. 3. Under Table Tools, click the Design tab. 4. In the Table Styles group, click Borders, and then click No Border. Add table borders to specified cells only 1. On the Home tab, in the Paragraph group, click Show/Hide. 2. Select the cells that you want, including their end-of-cell marks. 3. Under Table Tools, click the Design tab. 4. In the Table Styles group, click Borders, and then click the border that you want to add. Remove table borders from specified cells only 1. On the Home tab, in the Paragraph group, click Show/Hide. 2. Select the cells that you want, including their end-of-cell marks. 3. Under Table Tools, click the Design tab. 4. In the Table Styles group, click Borders, and then click No Border. Display or hide gridlines 20

21 Gridlines show the cell boundaries of a table on the screen wherever the table doesn't have borders applied. If you hide the gridlines in a table that has borders, you won't see the change because the gridlines are behind the borders. To view the gridlines, remove the borders. Unlike borders, gridlines appear only on the screen; they are never printed. If you turn off gridlines, the table is displayed as it will be printed. NOTE Gridlines are not visible when you view a document in a Web browser or in Print Preview. Display or hide table gridlines in a document Under Table Tools, on the Layout tab, in the Table group, click View Gridlines. Add a cell, row, or column Add a cell 1. Click in a cell that is located just to the right of or above where you want to insert a cell. 2. Under Table Tools, on the Layout tab, click the Rows & Columns Dialog Box Launcher. 3. Click one of the following options: Click this Shift cells right To do this Insert a cell and move all other cells in that row to the right. NOTE This option may result in a row that has more cells than the other rows. Shift cells down Insert entire row Insert entire column Insert a cell and move remaining existing cells in that column down one row each. A new row will be added at the bottom of the table to contain the last existing cell. Insert a row just above the cell that you clicked in. Insert a column just to the right of the cell that you clicked in. Add a row 1. Click in a cell that is located just below or above where you want to add a row. 2. Under Table Tools, click the Layout tab. 3. Do one of the following: To add a row just above the cell that you clicked in, in the Rows and Columns group, click Insert Above. 21

22 To add a row just below the cell that you clicked in, in the Rows and Columns group, click Insert Below. Add a column 1. Click in a cell that is located just to the right or left of where you want to add a column. 2. Under Table Tools, click the Layout tab. 3. Do one of the following: To add a column just to the left of the cell that you clicked in, in the Rows and Columns group, click Insert Left. To add a column just to the right of the cell that you clicked in, in the Rows and Columns group, click Insert Right. Delete a cell, row, or column 1. Do one of the following: To select A cell A row Do this Click the left edge of the cell.. Click to the left of the row. A column Click the column's top gridline or top border. 2. Under Table Tools, click the Layout tab. 3. In the Rows & Columns group, click Delete, and then click Delete Cells, Delete Rows, or Delete Columns, as appropriate. Merge or split cells Merge cells You can combine two or more cells in the same row or column into a single cell. For example, you can merge several cells horizontally to create a table heading that spans several columns. 1. Select the cells that you want to merge by clicking the left edge of a cell and then dragging across the other cells that you want. 2. Under Table Tools, on the Layout tab, in the Merge group, click Merge Cells. 22

23 Split cells 1. Click in a cell, or select multiple cells that you want to split. 2. Under Table Tools, on the Layout tab, in the Merge group, click Split Cells. 3. Enter the number of columns or rows that you want to split the selected cells into. Repeat a table heading on subsequent pages When you work with a very long table, it will be divided wherever a page break occurs. You can make adjustments to the table so that the table headings are repeated on each page. Repeated table headings are visible only in Print Layout view and when you print the document. 1. Select the heading row or rows. The selection must include the first row of the table. 2. Under Table Tools, on the Layout tab, in the Data group, click Repeat Header Rows. NOTE Word automatically repeats the table headings on each new page that results from an automatic page break. Word does not repeat a heading if you insert a manual page break within a table. Control where a table is divided When you work with a very long table, it must be divided wherever a page break occurs. By default, if a page break occurs within a large row, Microsoft Word allows a page break to divide the row between the two pages. You can make adjustments to the table to make sure that the information appears as you want it to when the table spans multiple pages. Prevent a table row from breaking across pages 1. Click in the table. 2. Under Table Tools, click the Layout tab. 3. In the Table group, click Properties, and then click the Row tab. 4. Clear the Allow row to break across pages check box. Force a table to break across pages at a particular row 1. Click in the row that you want to appear on the next page. 2. Press CTRL+ENTER. 23

24 Picture XP 2007 For a picture outside a drawing canvas 1. Click the picture that you want to add an effect to. 2. Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects. If you do not see the Picture Tools or Format tabs, make sure that you clicked a picture. 3. Do one or more of the following: To add or change a built-in combination of effects, point to Preset, and then click the effect that you want. To customize the built-in effect, click 3-D Options, and then choose the options that you want. For additional information about the options in the 3-D Format pane, click Help at the top of the Format Picture dialog box. 24

25 To add or change a shadow, point to Shadow, and then click the shadow that you want. To customize the shadow, click Shadow Options, and then choose the options that you want. For additional information about the options in the Shadow pane, click Help at the top of the Format Picture dialog box. To add or change a reflection, point to Reflection, and then click the reflection variation that you want. To add or change a glow, point to Glow, and then click the glow variation that you want. To customize the glow colours, click More Glow Colours, and then choose the colour that you want. To change to a colour that is not in the theme colours, click More Colours, and then either click the colour that you want on the Standard tab, or mix your own colour on the Custom tab. Custom colours and colours on the Standard tab do not update if you later change the document theme. To add or change a soft edge, point to Soft Edges, and then click the size of the edge that you want. To add or change an edge, point to Bevel, and then click the bevel that you want. To customize the bevel, click 3-D Options, and then choose the options that you want. For additional information about the options in the 3-D Format pane, click Help at the top of the Format Picture dialog box. To add or change a 3-D rotation, point to 3-D Rotation, and then click the rotation that you want. To customize the rotation, click 3-D Rotation Options, and then choose the options that you want. For additional information about the options in the 3-D Rotation pane, click Help at the top of the Format Picture dialog box. For one picture or more pictures in a drawing canvas Only shadow effects can be added in to pictures in a drawing canvas. It is not possible to add other effects such as reflections, glows, soft edges, bevels, or 3-D rotations. 25

26 1. Click the picture that you want to add a shadow effect to. NOTE To add the same effect to multiple pictures, you must change the text wrapping style and copy the pictures to a drawing canvas. (After adding or changing the effect, you can copy them back to the original location in your document.) To change the text wrapping style, right-click each picture, and on the shortcut menu, point to Text Wrapping. Then click Square or any option other than In Line with Text. 2. Under Picture Tools, on the Format tab, in the Shadow Effects group, click the arrow next to Shadow Effects, and then choose the shadow that you want. If you do not see the Picture Tools or Format tabs, make sure that you clicked a picture. To customize the shadow colour, point to Shadow Colour, and then click the colour that you want. To change to a colour that is not in the theme colours, click More Shadow Colours, and then either click the colour that you want on the Standard tab, or mix your own colour on the Custom tab. Custom colours and colours on the Standard tab do not update if you later change the document theme. Spell Checking XP 2007 Word 1. On the Review tab, in the Proofing group, click Spelling & Grammar. 26

27 TIP You can access this command quickly by adding it to the Quick Access Toolbar, which is a part of the Microsoft Office Fluent user interface, by right-clicking the Spelling & Grammar button, and then clicking Add to Quick Access Toolbar on the shortcut menu. 2. If the program finds spelling mistakes, a dialog box or task pane is displayed, and the first misspelled word found by the spelling checker is selected. You can resolve each error that the program finds in different ways. I want to fix the error by using one of the suggested words. Select the word from the Suggestions list, and then click Change. I want to fix the error by changing the word, myself. 2. Click the word in the file, and edit the word as needed to fix the word. 3. After you fix the word, click Find Next in InfoPath, Start Spell Check in OneNote, or Resume for all other programs. The misspelled word is actually a real word that I use. I want all of the Microsoft Office programs to recognize this word and not treat it as a misspelling. Click Add or Add to Dictionary. I want to ignore this misspelled word and move on to the next misspelled word. Click Ignore Once. I want to ignore all instances of this misspelled word and move on to the next misspelled word. Click Ignore All. IMPORTANT Clicking Ignore All in Word causes the spelling checker to ignore all existing instances of the word, permanently. In Word, you can make the spelling checker find these ignored words again. I tend to make this mistake a lot, so I want the program to automatically fix this mistake for me whenever I type it. Select the correct word from the Suggestions list, and then click AutoCorrect. After you resolve each misspelled word, the program flags the next misspelled word so that you can decide what you want to do. 27

28 In Outlook or Word only, after the program finishes flagging the spelling mistakes, it begins showing you the grammar mistakes. For each mistake, select an option in the Spelling and Grammar dialog box. Top of Page Check spelling and grammar automatically If you are looking for a way to find and fix spelling mistakes in your file more quickly and easily, or if you don't want to see the wavy red lines that your Microsoft Office program displays in your file, this section explains how automatic spelling and grammar checking works and how to turn it on or off. NOTES There is no option to check spelling while you type in Access, Excel, or Project. Grammar checking is available only in Outlook and Word. How automatic spelling checking works When you check spelling automatically while you type, you can be more confident that you won't need to correct a lot of spelling mistakes when you are ready to deliver your file. Your Microsoft Office program can flag misspelled words while you work so that you can easily spot them, as in the following example. You can right-click the misspelled word to see suggested corrections on the shortcut menu. Depending on the Microsoft Office program that you are using, right-clicking a word can provide you with other options on the shortcut menu, such as adding the word to your custom dictionary. 1. Click the Microsoft Office Button, and then click Word Options. 28

29 2. Click Proofing. 3. To turn on or off automatic spelling checking and automatic grammar checking for the currently open document, do the following: Under Exceptions for, click Name of currently open file. Select or clear the Hide spelling errors in this document only and Hide grammar errors in this document only check boxes. To turn on or off automatic spelling checking and automatic grammar checking for all documents that you create from now on, do the following: Under Exceptions for, click All New Documents. Select or clear the Hide spelling errors in this document only and Hide grammar errors in this document only check boxes. Creating Building Blocks 29

30 Frequently used document content, such as a paragraph or several paragraphs of data, logos, graphics, specifically formatted headers or footers, standard tables, or equations any type of content can be easily turned into a Building Block. You can create Building Blocks from newly created content or even data from documents that were created in previous versions of Word. Simply select the data that you want to turn into a reusable Building Block. On the Insert tab, click Quick Parts, and then click Save Selection To Quick Part Gallery, or press Alt+F3. The Create New Building Block dialog box displays as shown in Figure 4. TIP If you want to include all paragraph formatting, such as style, line spacing, indentation, alignment, and so forth, select the paragraph mark ( ) along with your content. If you aren't already viewing formatting marks, navigate to the Home tab and, in the Paragraph group, click the Show/Hide button to toggle the formatting marks so you can verify that you included the paragraph mark in your selection. If you do not include the paragraph mark, the inserted Building Block will match the formatting of the current paragraph. If you want your Building Blocks to be Theme enabled so that the formats update automatically, then use Theme fonts and colors from the Theme Color section of the color palettes. Figure 4 The Create New Building Block dialog box enables you to name, classify, describe, and control the placement of Building Blocks that you create. The Create New Building Block dialog box contains the following options: Name Enter a unique name for the Building Block. If you have a set of related Building Blocks, consider starting all of the names with the same first word to group the pieces together when necessary, such as Annual Report Cover, Annual Report Header, and Annual Report Table. 30

31 Gallery Add your new Building Block to a specific gallery, such as Cover Pages, Page Numbers, Headers, Footers, Quick Tables, Watermarks, and so on. If your Building Block is a general Building Block and isn't related to an existing gallery, use Quick Parts so that they will appear under the Quick Parts gallery. TIP Some Building Block galleries perform additional actions when you insert a Building Block from the gallery. For example, a Cover Page is added as the first page or is swapped with another previously inserted Cover Page. Headers, Footers, and Page Numbers are inserted in the Header and Footer layer in the document. To view other actions, right-click the Building Block entry and use an alternate command, shown previously in Figure 3. Category Place the Building Block in a category, shown on the Building Block galleries and in the Building Blocks Organizer. Consider creating a new category for your company or department so that all of the associated Building Blocks are placed in the same category throughout the Building Block galleries and to quickly sort them in the Building Blocks Organizer. TIP To display your Building Blocks at the top of the Building Block galleries, create a Category name that starts with a symbol, such as an asterisk, or place the name in parentheses. Description Provide a brief description to help remind you and inform others about the main purpose of the Building Block. Descriptions appear as enhanced ScreenTips in the Building Block gallery (provided that Show Feature Descriptions In Screen Tip is turned on in Word Options) and also appear below the preview pane when you select a Building Block in the Building Blocks Organizer. Save In Building Blocks can only be saved in templates. You can save Building Blocks in Building Blocks.dotx (selected by default), Normal.dotm, or a global template so that they are available to all open documents. They can also be saved in a document template that makes the Building Blocks available only to documents using that template. The Save In list contains Building Blocks.dotx, Normal.dotm, loaded global templates, the attached document template for the active document if it's a template other than Normal.dotm, and any saved template provided that it is open and the current file. If you are creating Building Blocks to share with others, you want to save your Building Blocks in a separate template so you can distribute them. NOTE If you save or modify a Building Block in Building Blocks.dotx, Normal.dotx (provided that the Prompt Before Saving Normal Template option is turned on in the Advanced area of Word Options), or a global template, you are prompted to save changes 31

32 to the template when you exit Word. For attached document templates, you are prompted to save changes to the template on closing the document. Options Specify whether the Building Block should be Inserted As Content only at the location of the cursor (such as an equation), Inserted In Its Own Paragraph (such as a heading), or Inserted In Its Own Page (inserts a page break before and after the Building Block). TIP Use the Save Selection To Gallery Name gallery found at the bottom of the Building Block galleries to quickly access the Create New Building Block dialog box and automatically select the corresponding gallery in the dialog box. The following image displays a few custom Building Blocks assigned to different Building Block galleries by using a custom Category name (Coral Reef Divers) to place them at the tops of the galleries so that they can be easily found for quick insertion. NOTE If you add a number of custom Building Blocks to the Building Blocks template, remember to back up the template and store your backup copy in a separate location. Like the Normal.dotm template, the Building Blocks.dotx template could potentially become corrupt and you could lose 32

Use Table Styles to format an entire table. Format a table. What do you want to do? Hide All

Use Table Styles to format an entire table. Format a table. What do you want to do? Hide All Page 1 of 6 Word > Tables > Formatting tables Format a table Hide All After you create a table, Microsoft Office Word 2007 offers you many ways to format that table. If you decide to use Table Styles,

More information

Microsoft Office Training Skills 2010

Microsoft Office Training Skills 2010 Microsoft Office Training Skills 2010 Lesson 5 Working with pages, Tables, Shapes and Securing Documents Adding Page color Add color to the background of one or several pages in the document. 1. Click

More information

Word Select New in the left pane. 3. Select Blank document in the Available Templates pane. 4. Click the Create button.

Word Select New in the left pane. 3. Select Blank document in the Available Templates pane. 4. Click the Create button. Microsoft QUICK Word 2010 Source Getting Started The Word Window u v w x z Opening a Document 2. Select Open in the left pane. 3. In the Open dialog box, locate and select the file you want to open. 4.

More information

What can Word 2013 do?

What can Word 2013 do? Mary Ann Wallner What can Word 2013 do? Provide the right tool for: Every aspect of document creation Desktop publishing Web publishing 2 Windows 7: Click Start Choose Microsoft Office > Microsoft Word

More information

Office 2010: Transition from Office Contents. Moving to Microsoft Office Microsoft Office 2010 Project Transition from Office 2003

Office 2010: Transition from Office Contents. Moving to Microsoft Office Microsoft Office 2010 Project Transition from Office 2003 Office 2010: Transition from Office 2003 Contents Office 2010: Transition from Office 2003... 1 Moving to Microsoft Office 2010... 1 Universal Features... 2 KeyTips... 2 Backstage View... 2 Quick Access

More information

Microsoft Word 2010 Tutorial

Microsoft Word 2010 Tutorial 1 Microsoft Word 2010 Tutorial Microsoft Word 2010 is a word-processing program, designed to help you create professional-quality documents. With the finest documentformatting tools, Word helps you organize

More information

Microsoft Word Important Notice

Microsoft Word Important Notice Microsoft Word 2013 Important Notice All candidates who follow an ICDL/ECDL course must have an official ICDL/ECDL Registration Number (which is proof of your Profile Number with ICDL/ECDL and will track

More information

Spreadsheets Microsoft Office Button Ribbon

Spreadsheets Microsoft Office Button Ribbon Getting started with Excel 2007 you will notice that there are many similar features to previous versions. You will also notice that there are many new features that you ll be able to utilize. There are

More information

Word Getting Started The Word Window u vw. Microsoft QUICK Source. Creating a New Blank Document. Creating a New Document from a Template

Word Getting Started The Word Window u vw. Microsoft QUICK Source. Creating a New Blank Document. Creating a New Document from a Template Microsoft QUICK Source Word 2007 Getting Started The Word Window u vw x y z u Quick Access Toolbar contains shortcuts for the most commonly used tools. v Microsoft Office Button contains common file and

More information

Microsoft How to Series

Microsoft How to Series Microsoft How to Series Getting Started with EXCEL 2007 A B C D E F Tabs Introduction to the Excel 2007 Interface The Excel 2007 Interface is comprised of several elements, with four main parts: Office

More information

Computer Nashua Public Library Introduction to Microsoft Word 2010

Computer Nashua Public Library Introduction to Microsoft Word 2010 Microsoft Word is a word processing program you can use to write letters, resumes, reports, and more. Anything you can create with a typewriter, you can create with Word. You can make your documents more

More information

MICROSOFT WORD 2010 BASICS

MICROSOFT WORD 2010 BASICS MICROSOFT WORD 2010 BASICS Word 2010 is a word processing program that allows you to create various types of documents such as letters, papers, flyers, and faxes. The Ribbon contains all of the commands

More information

Microsoft Excel 2010 Basic

Microsoft Excel 2010 Basic Microsoft Excel 2010 Basic Introduction to MS Excel 2010 Microsoft Excel 2010 is a spreadsheet software in the new Microsoft 2010 Office Suite. Excel allows you to store, manipulate and analyze data in

More information

MICROSOFT WORD 2010 Quick Reference Guide

MICROSOFT WORD 2010 Quick Reference Guide MICROSOFT WORD 2010 Quick Reference Guide Word Processing What is Word Processing? How is Word 2010 different from previous versions? Using a computer program, such as Microsoft Word, to create and edit

More information

Microsoft Word Part I Reference Manual

Microsoft Word Part I Reference Manual Microsoft Word 2002 Part I Reference Manual Instructor: Angela Sanderson Computer Training Coordinator Updated by: Angela Sanderson January 11, 2003 Prepared by: Vi Johnson November 20, 2002 THE WORD SCREEN

More information

MS Word 2010 An Introduction

MS Word 2010 An Introduction MS Word 2010 An Introduction Table of Contents The MS Word 2010 Environment... 1 The Word Window Frame... 1 The File Tab... 1 The Quick Access Toolbar... 4 To Customize the Quick Access Toolbar:... 4

More information

MICROSOFT ACADEMY WORD STUDY GUIDE FOR CERTIFICATION EXAM

MICROSOFT ACADEMY WORD STUDY GUIDE FOR CERTIFICATION EXAM MICROSOFT ACADEMY WORD STUDY GUIDE FOR CERTIFICATION EXAM SKILLS TO KNOW: 1. How to find a word and replace it with another word a. Home Tab b. Editing Group c. Select Find type in word in Navigation pane

More information

2009 Microsoft Corporation. All rights reserved. Page 1

2009 Microsoft Corporation. All rights reserved. Page 1 Set up a document Getting started with a basic document in Microsoft Office Word 2007 is as easy as opening a new or existing document and starting to type. Whether you start a document from scratch or

More information

Word - Basics. Course Description. Getting Started. Objectives. Editing a Document. Proofing a Document. Formatting Characters. Formatting Paragraphs

Word - Basics. Course Description. Getting Started. Objectives. Editing a Document. Proofing a Document. Formatting Characters. Formatting Paragraphs Course Description Word - Basics Word is a powerful word processing software package that will increase the productivity of any individual or corporation. It is ranked as one of the best word processors.

More information

Microsoft PowerPoint 2007 Tutorial

Microsoft PowerPoint 2007 Tutorial Microsoft PowerPoint 2007 Tutorial Prepared By:- Mohammad Murtaza Khan I. T. Expert Sindh Judicial Academy Contents Getting Started... 5 Presentations... 5 Microsoft Office Button... 5 Ribbon... 6 Quick

More information

Correcting Grammar as You Type. 1. Right-click the text marked with the blue, wavy underline. 2. Click the desired option on the shortcut menu.

Correcting Grammar as You Type. 1. Right-click the text marked with the blue, wavy underline. 2. Click the desired option on the shortcut menu. PROCEDURES LESSON 11: CHECKING SPELLING AND GRAMMAR Selecting Spelling and Grammar Options 2 Click Options 3 In the Word Options dialog box, click Proofing 4 Check options as necessary under the When correcting

More information

Microsoft Word 2007 on Windows

Microsoft Word 2007 on Windows 1 Microsoft Word 2007 on Windows Word is a very popular text formatting and editing program. It is the standard for writing papers and other documents. This tutorial and quick start guide will help you

More information

Correcting Grammar as You Type

Correcting Grammar as You Type PROCEDURES LESSON 11: CHECKING SPELLING AND GRAMMAR Selecting Spelling and Grammar Options 2 Click Options 3 In the Word Options dialog box, click Proofing 4 Check options as necessary under the When correcting

More information

Word 2013 Quick Start Guide

Word 2013 Quick Start Guide Getting Started File Tab: Click to access actions like Print, Save As, and Word Options. Ribbon: Logically organize actions onto Tabs, Groups, and Buttons to facilitate finding commands. Active Document

More information

Changing Worksheet Views

Changing Worksheet Views PROCEDURES LESSON 1: TOURING EXCEL Starting Excel 1 Click the Start button 2 Click All Programs 3 Click the Microsoft Office folder icon 4 Click Microsoft Excel 2010 Naming and Saving (Ctrl+S) a Workbook

More information

Office 1 Using Microsoft Word

Office 1 Using Microsoft Word Office 1 Using Microsoft Word A free class offered by Birchard Public Library 423 Croghan Street Fremont, OH 43420 419-334-7101 X216 On the web at www.birchard.lib.oh.us Class content created by Westerville

More information

11.1 Create Speaker Notes Print a Presentation Package a Presentation PowerPoint Tips... 44

11.1 Create Speaker Notes Print a Presentation Package a Presentation PowerPoint Tips... 44 Contents 1 Getting Started... 1 1.1 Presentations... 1 1.2 Microsoft Office Button... 1 1.3 Ribbon... 2 1.4 Mini Toolbar... 2 1.5 Navigation... 3 1.6 Slide Views... 4 2 Customize PowerPoint... 5 2.1 Popular...

More information

Changing Worksheet Views

Changing Worksheet Views PROCEDURES LESSON 1: TOURING EXCEL Starting Excel From the Windows Start screen, click the Excel 2013 program tile 1 Right-click a blank area of the Windows Start screen 2 Click the All Apps button 3 Click

More information

Introduction to Microsoft Word 2008

Introduction to Microsoft Word 2008 1. Launch Microsoft Word icon in Applications > Microsoft Office 2008 (or on the Dock). 2. When the Project Gallery opens, view some of the available Word templates by clicking to expand the Groups, and

More information

Introduction to Microsoft Office 2016: Word

Introduction to Microsoft Office 2016: Word Introduction to Microsoft Office 2016: Word Last Updated: September 2018 Cost: $2.00 Microsoft Word is a word processing software. You can use it to type letters, reports, and other documents. This class

More information

button Double-click any tab on the Ribbon to minimize it. To expand, click the Expand the Ribbon button

button Double-click any tab on the Ribbon to minimize it. To expand, click the Expand the Ribbon button PROCEDURES LESSON 1: CREATING WD DOCUMENTS WITH HEADERS AND FOOTERS Starting Word 1 Click the Start button 2 Click All Programs 3 Click the Microsoft Office folder icon 4 Click Microsoft Word 2010 1 Click

More information

Anleitungen für Word 2016 als Word-Dokument zum Ausdrucken und fürs Intranet

Anleitungen für Word 2016 als Word-Dokument zum Ausdrucken und fürs Intranet Anleitungen für Word 2016 als Word-Dokument zum Ausdrucken und fürs Intranet 19 Text and Tabs Tabs (tab stops) help you to write a list, for example, for an order or invoice. Larger spaces should not be

More information

Microsoft Office Word 2010

Microsoft Office Word 2010 Microsoft Office Word 2010 Content Microsoft Office... 0 A. Word Basics... 4 1.Getting Started with Word... 4 Introduction... 4 Getting to know Word 2010... 4 The Ribbon... 4 Backstage view... 7 The Quick

More information

1 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007)

1 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007) 1 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007) 2 THE PNP BASIC COMPUTER ESSENTIALS e-learning (MS Powerpoint 2007) TABLE OF CONTENTS CHAPTER 1: GETTING STARTED... 4 MICROSOFT OFFICE

More information

PowerPoint 2010 Level 1 Computer Training Solutions Student Guide Version Revision Date Course Length

PowerPoint 2010 Level 1 Computer Training Solutions Student Guide Version Revision Date Course Length Level 1 Computer Training Solutions Version 1.2 Revision Date Course Length 2012-Feb-16 6 hours Table of Contents Quick Reference... 3 Frequently Used Commands... 3 Manitoba ehealth Learning Management

More information

Introduction to Microsoft Office 2007

Introduction to Microsoft Office 2007 Introduction to Microsoft Office 2007 What s New follows: TABS Tabs denote general activity area. There are 7 basic tabs that run across the top. They include: Home, Insert, Page Layout, Review, and View

More information

Lesson 1: Creating, Formatting, and Editing a Word Document with a Picture Microsoft Word 2016 IN THIS CHAPTER, YOU WILL LEARN HOW TO

Lesson 1: Creating, Formatting, and Editing a Word Document with a Picture Microsoft Word 2016 IN THIS CHAPTER, YOU WILL LEARN HOW TO Lesson 1: Creating, Formatting, and Editing a Word Document with a Picture Microsoft Word 2016 IN THIS CHAPTER, YOU WILL LEARN HOW TO Enter Text in a new document Enhance the Page with a border and Format

More information

Microsoft Office 2010 Tutorial

Microsoft Office 2010 Tutorial Microsoft Office 2010 Tutorial Contents Microsoft Office 2010 Tutorial... 1 Find your way through long documents with the new Document Navigation pane and Search... 4 Adjust the spaces between lines or

More information

Excel 2010 Level 1: The Excel Environment

Excel 2010 Level 1: The Excel Environment Excel 2010 Level 1: The Excel Environment Table of Contents The Excel 2010 Environment... 1 The Excel Window... 1 File Tab... 1 The Quick Access Toolbar... 4 Access the Customize the Quick Access Toolbar

More information

Introduction to Microsoft Word 2007 Prepared by:

Introduction to Microsoft Word 2007 Prepared by: Introduction to Microsoft Word 2007 Prepared by: INSTITUTE for ADVANCED STUDY IAS Information Technology Group Einstein Drive, Princeton, NJ 08540 10/28/08 2 TABLE OF CONTENTS INTRODUCTION... 6 GETTING

More information

Instructional Booklet Mary Ann Wallner

Instructional Booklet Mary Ann Wallner Instructional Booklet Mary Ann Wallner Microsoft Word Contents Basic Microsoft Word Instructions... 5 Show or hide formatting marks... 5 Change page margins... 5 Revise words underlined in red, green,

More information

THE RIBBON THE OFFICE BUTTON TABS, CONTEXTUAL TABS, PROGRAM TABS

THE RIBBON THE OFFICE BUTTON TABS, CONTEXTUAL TABS, PROGRAM TABS THE RIBBON If you ve seen Office 2007 (Word, Excel, PowerPoint, Access, or Outlook items such as messages), you know about the Ribbon. It houses tabs with functional groupings of buttons and drop-down

More information

SKILL AREA 210: USE A WORD PROCESSING SOFTWARE. Lesson 1: Getting Familiar with Microsoft Word 2007 for Windows...5

SKILL AREA 210: USE A WORD PROCESSING SOFTWARE. Lesson 1: Getting Familiar with Microsoft Word 2007 for Windows...5 Contents Microsoft Word 2007...5 Lesson 1: Getting Familiar with Microsoft Word 2007 for Windows...5 The Microsoft Office Button...6 The Quick Access Toolbar...6 The Title Bar...6 The Ribbon...6 The Ruler...6

More information

PowerPoint Instructions

PowerPoint Instructions PowerPoint Instructions Exercise 1: Type and Format Text and Fix a List 1. Open the PowerPoint Practice file. To add a company name to slide 1, click the slide 1 thumbnail if it's not selected. On the

More information

Getting Acquainted with Office 2007 Table of Contents

Getting Acquainted with Office 2007 Table of Contents Table of Contents Using the New Interface... 1 The Office Button... 1 The Ribbon... 2 Galleries... 2 Microsoft Help with Changes... 2 Viewing Familiar Dialog Boxes... 2 Download Get Started Tabs from Microsoft...

More information

Word 2010 Skills Checklist

Word 2010 Skills Checklist S1 S2 Sharing and Maintaining Documents 1.1 Apply different views to a document Select zoom options Split windows Arrange windows Arrange document views Switch between windows Open a document in a new

More information

Microsoft Office Training Skills 2010

Microsoft Office Training Skills 2010 Lesson 3 - Creating Documents with MS word 2010 Introduction to Word Processing MS-Word 2010 is word processing application that is used create and edit documents such as: Books, letters, reports, newsletters,

More information

Lehigh University Library & Technology Services

Lehigh University Library & Technology Services Lehigh University Library & Technology Services Start Word Open a file called day2 Microsoft WORD 2003 Day 2 Click the Open button on the Standard Toolbar Go to the A: drive and highlight day2 and click

More information

Introduction to Microsoft Word 2010

Introduction to Microsoft Word 2010 Introduction to Microsoft Word 2010 Microsoft Word is a word processing program you can use to write letters, resumes, reports, and more. Anything you can create with a typewriter, you can create with

More information

INTRODUCTION... 1 LONG DOCUMENTS V SHORT DOCUMENTS... 2 SECTION BREAKS... 2

INTRODUCTION... 1 LONG DOCUMENTS V SHORT DOCUMENTS... 2 SECTION BREAKS... 2 Word 2010 Level 2 Table of Contents INTRODUCTION... 1 LONG DOCUMENTS V SHORT DOCUMENTS... 2 SECTION BREAKS... 2 PAGE LAYOUT BREAKS... 2 Section break examples... 2 Inserting Section Breaks... 3 Deleting

More information

Microsoft Word 2010 Basics

Microsoft Word 2010 Basics 1 Starting Word 2010 with XP Click the Start Button, All Programs, Microsoft Office, Microsoft Word 2010 Starting Word 2010 with 07 Click the Microsoft Office Button with the Windows flag logo Start Button,

More information

Introduction to Microsoft Word 2007 Quickguide

Introduction to Microsoft Word 2007 Quickguide Introduction to Microsoft Word 2007 Quickguide Opening Word -Click the Start button -Click Programs from the start menu -Select Microsoft Office -Click Microsoft Office Word 2007 -A new blank document

More information

Working with Tables in Word 2010

Working with Tables in Word 2010 Working with Tables in Word 2010 Table of Contents INSERT OR CREATE A TABLE... 2 USE TABLE TEMPLATES (QUICK TABLES)... 2 USE THE TABLE MENU... 2 USE THE INSERT TABLE COMMAND... 2 KNOW YOUR AUTOFIT OPTIONS...

More information

Introduction to Word 2010

Introduction to Word 2010 Introduction to Word 2010 Screen Elements 4 1 2 3 5 10 6 7 8 9 1. File Tab: The File tab will bring you into the Backstage View. The Backstage View is where you manage your files and the data about them

More information

Table of Contents. Word. Using the mouse wheel 39 Moving the insertion point using the keyboard 40 Resume reading 41

Table of Contents. Word. Using the mouse wheel 39 Moving the insertion point using the keyboard 40 Resume reading 41 Table of Contents iii Table of Contents Word Starting Word What is word processing? 2 Starting Word 2 Exploring the Start screen 4 Creating a blank document 4 Exploring the Word document window 5 Exploring

More information

Word 2007/10/13 1 Introduction

Word 2007/10/13 1 Introduction Objectives Word 2007/10/13 1 Introduction Understand the new Word 2007 Interface Navigate the Office button Learn about the Quick Access menu Navigate the Ribbon menu interface Understand the I-beam Learn

More information

Microsoft Word Intermediate March 25, Exercise 1: Open Word Click on Word. OR Click Start. Click All Programs. Click Microsoft Office.

Microsoft Word Intermediate March 25, Exercise 1: Open Word Click on Word. OR Click Start. Click All Programs. Click Microsoft Office. Microsoft Word Intermediate March 25, 2014 Exercise 1: Open Word Click on Word. OR Click Start. Click All Programs. Click Microsoft Office. Exercise 2: Create a new document Click File Tab. Select New.

More information

The New Office 2010 Interface and Shared Features

The New Office 2010 Interface and Shared Features The New Office 2010 Interface and Shared Features The Ribbon and Ribbon Tabs Minimising and Maximising Minimise Ribbon button Double-click Keytips and shortcut keys (Press Alt or F10) Standard vs contextual

More information

New York City College of Technology. Microsoft Word Contact Information:

New York City College of Technology. Microsoft Word Contact Information: New York City College of Technology Microsoft Word 2016 Contact Information: 718-254-8565 ITEC@citytech.cuny.edu Opening Word 2016 Begin by clicking on the bottom left corner icon on the desktop. From

More information

Get to know Word 2007 I: Create your first document Quick Reference Card

Get to know Word 2007 I: Create your first document Quick Reference Card Get to know Word 2007 I: Create your first document Quick Reference Card Get Help To find out how to do something, click the Microsoft Office Word Help button in the upper-right corner of the window. Then

More information

Introduction to Microsoft Word 2010

Introduction to Microsoft Word 2010 Introduction to Microsoft Word 2010 Microsoft Word is a word processing program you can use to write letters, resumes, reports, and more. Anything you can create with a typewriter, you can create with

More information

Quick Reference Summary

Quick Reference Summary Microsoft Word 2010 Quick Reference Summary Microsoft Word 2010 Quick Reference Summary Number Mouse Ribbon Menu AddressBlock Merge Field, Add AddressBlock Merge Field, Edit WD 349 WD 349 Address Block

More information

Microsoft Word 2010 Part 1: Introduction to Word

Microsoft Word 2010 Part 1: Introduction to Word CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Microsoft Word 2010 Part 1: Introduction to Word Summer 2011, Version 1.0 Table of Contents Introduction...3 Starting the Program...3

More information

Contents. Launching Word

Contents. Launching Word Using Microsoft Office 2007 Introduction to Word Handout INFORMATION TECHNOLOGY SERVICES California State University, Los Angeles Version 1.0 Winter 2009 Contents Launching Word 2007... 3 Working with

More information

Tips and Tricks for Microsoft Word 2010

Tips and Tricks for Microsoft Word 2010 Tips and Tricks for Microsoft Word 2010 TABLE OF CONTENTS Shortcuts for Selecting Text... 1 Create Automatic Borders... 1 Bulleted and Numbered List Shortcuts... 1 Insert Normal Text Within a List... 2

More information

Modul ke: Aplikasi Komputer. Pengenalan Ms. Word. Fakultas FASILKOM. Program Studi Sistem Informasi

Modul ke: Aplikasi Komputer. Pengenalan Ms. Word. Fakultas FASILKOM. Program Studi Sistem Informasi Modul ke: 02 Devi Fakultas FASILKOM Aplikasi Komputer Pengenalan Ms. Word Fitrianah Program Studi Sistem Informasi Pendahuluan Microsoft Word is a word processing program used to create: Letters Memos

More information

Beginning a presentation

Beginning a presentation L E S S O N 2 Beginning a presentation Suggested teaching time 40-50 minutes Lesson objectives To learn how to create and edit title and bullet slides, you will: a b c d Select slide types by using the

More information

Office 2007 User s Guide

Office 2007 User s Guide Office 2007 User s Guide Help with Toolbars and Ribbons Table of Contents: Office 2007 general information pages 2-3 Word 2007 - Pages 4-8 Outlook 2007 Pages 9-14 Excel 2007 Pages 15-17 PowerPoint 2007

More information

Microsoft PowerPoint 2016 Basics Unit 9 Final Review - Student Notes Directions: Fill in the blanks.

Microsoft PowerPoint 2016 Basics Unit 9 Final Review - Student Notes Directions: Fill in the blanks. Directions: Fill in the blanks. 1. PowerPoint Window Layout 2. File Tab When clicked, opens - automatically opens the Info option by default Holds the following options: - Info - New - Open - Save - Save

More information

Microsoft Office Word 2016 for Mac

Microsoft Office Word 2016 for Mac Microsoft Office Word 2016 for Mac Introduction to Word University Information Technology Services Learning Technologies, Training & Audiovisual Outreach Copyright 2016 KSU Division of University Information

More information

The American University in Cairo. Academic Computing Services. Word prepared by. Soumaia Ahmed Al Ayyat

The American University in Cairo. Academic Computing Services. Word prepared by. Soumaia Ahmed Al Ayyat The American University in Cairo Academic Computing Services Word 2000 prepared by Soumaia Ahmed Al Ayyat Spring 2001 Table of Contents: Opening the Word Program Creating, Opening, and Saving Documents

More information

Microsoft Word 2010 Guide

Microsoft Word 2010 Guide Microsoft Word 2010 Guide 1 Microsoft Word 2010 These notes are devised for Word 2010. You should be aware that it is similar to Word 2007 but is quite different from earlier versions of Word, e.g. Word

More information

WELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL

WELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL WELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL 1 Microsoft Office Word 2010 allows you to create and edit personal and business documents, such as letters, reports, invoices,

More information

PowerPoint 2016 Building a Presentation

PowerPoint 2016 Building a Presentation PowerPoint 2016 Building a Presentation What is PowerPoint? PowerPoint is presentation software that helps users quickly and efficiently create dynamic, professional-looking presentations through the use

More information

Quick Access Toolbar. You click on it to see these options: New, Open, Save, Save As, Print, Prepare, Send, Publish and Close.

Quick Access Toolbar. You click on it to see these options: New, Open, Save, Save As, Print, Prepare, Send, Publish and Close. Opening Microsoft Word 2007 in the practical room UNIT-III 1 KNREDDY 1. Nyelvi beállítások az Office 2007-hez (Language settings for Office 2007 (not 2003)) English. 2. Double click on the Word 2007 icon

More information

Microsoft Word Chapter 1. Creating, Formatting, and Editing a Word Document with Pictures

Microsoft Word Chapter 1. Creating, Formatting, and Editing a Word Document with Pictures Microsoft Word 2010 Chapter 1 Creating, Formatting, and Editing a Word Document with Pictures Objectives Enter text in a Word document Check spelling as you type Format paragraphs Format text Undo and

More information

Contents. Introduction 15. How to use this course 18. Session One: Basic Skills 21. Session Two: Doing Useful Work with Excel 65

Contents. Introduction 15. How to use this course 18. Session One: Basic Skills 21. Session Two: Doing Useful Work with Excel 65 Contents Introduction 15 Downloading the sample files... 15 Problem resolution... 15 The Excel version and locale that were used to write this book... 15 Typographical Conventions Used in This Book...

More information

Lesson 2 Quick Tour and Features

Lesson 2 Quick Tour and Features Lesson 2 Quick Tour and Features Objectives Students will format a document page. Students will use a spell-checker. Students will copy, cut, and paste text. Students will adjust paragraph indentations.

More information

Excel Main Screen. Fundamental Concepts. General Keyboard Shortcuts Open a workbook Create New Save Preview and Print Close a Workbook

Excel Main Screen. Fundamental Concepts. General Keyboard Shortcuts Open a workbook Create New Save Preview and Print Close a Workbook Excel 2016 Main Screen Fundamental Concepts General Keyboard Shortcuts Open a workbook Create New Save Preview and Print Close a Ctrl + O Ctrl + N Ctrl + S Ctrl + P Ctrl + W Help Run Spell Check Calculate

More information

The New Office 2007 Interface and Shared Features

The New Office 2007 Interface and Shared Features The New Office 2007 Interface and Shared Features The Ribbon and Ribbon Tabs Minimising and Maximising Keytips and shortcut keys Standard vs contextual tabs Live Preview Dialogue Box/ Task Pane launchers

More information

Applied Systems Client Network SEMINAR HANDOUT. Document Setup in TAM Changing from Office 2003 to 2007, where ARE things now?

Applied Systems Client Network SEMINAR HANDOUT. Document Setup in TAM Changing from Office 2003 to 2007, where ARE things now? Applied Systems Client Network SEMINAR HANDOUT Document Setup in TAM Changing from Office 2003 to 2007, where ARE things now? Prepared for ASCnet Applied Systems Client Network 801 Douglas Avenue #205

More information

Table of Contents. Preface... iii COMPUTER BASICS WINDOWS XP

Table of Contents. Preface... iii COMPUTER BASICS WINDOWS XP Table of Contents Preface... iii COMPUTER BASICS Fundamentals of Computer 1 Various Types of Computers 2 Personal Computer 2 Personal Digital Assistant 3 Laptop Computer 3 Tablet PC 3 Main Frame Computer

More information

Word Learning Technology and Training Services. Angelo State University

Word Learning Technology and Training Services. Angelo State University Word 2010 Angelo State University http://elearning.angelo.edu elearning@angelo.edu 942-2334 ext 6263 MCS-106 Overview Contents New Look... 4 File Menu... 4 Quick Access Toolbar... 4 Ribbon... 4 Document

More information

Productivity Tools Objectives

Productivity Tools Objectives Word 2003 Understand Microsoft Office Word 2003 Launch Microsoft Office Word 2003 Open Documents Understand The Working Screen Experiment With The Working Screen Navigate Documents Close Documents And

More information

Office 2007 Overview

Office 2007 Overview Kent School District Office 2007 Overview Office Button Quick Access Toolbar The Ribbon and Tabs Mini Toolbar Other Office Applications Resources 1 P a g e Created by G. Kinkade, CTE; adapted by G. Whiteman,

More information

Table of Contents The University of Akron These materials were developed and are owned by The University of Akron. All rights reserved.

Table of Contents The University of Akron These materials were developed and are owned by The University of Akron. All rights reserved. Table of Contents COURSE OVERVIEW... 2 CONVENTIONS USED IN THIS MANUAL... 3 LESSON 1: SYMBOLS... 4 INSERTING SYMBOLS... 4 USING AUTOCORRECT TO INSERT SYMBOLS... 5 TURN ON AUTOCORRECT... 5 LESSON 2: SPECIAL

More information

Life After Word An Introduction to Microsoft Word The University of Iowa ITS Campus Technology Services Iowa City, IA 52242

Life After Word An Introduction to Microsoft Word The University of Iowa ITS Campus Technology Services Iowa City, IA 52242 Life After Word 2003 An Introduction to Microsoft Word 2007 ITS Campus Technology Services Iowa City, IA 52242 March 2007 2 TABLE OF CONTENTS TABLE OF CONTENTS... 2 INTRODUCTION... 4 WHAT S NEW... 4 GETTING

More information

Spring Semester Study Guide

Spring Semester Study Guide Spring Semester Study Guide 1. When you create a table in Datasheet view, Access automatically adds a field called ID as the first field in the table. 2. To undo the most recent change to a table structure,

More information

Quick Start Guide - Contents. Opening Word Locating Big Lottery Fund Templates The Word 2013 Screen... 3

Quick Start Guide - Contents. Opening Word Locating Big Lottery Fund Templates The Word 2013 Screen... 3 Quick Start Guide - Contents Opening Word... 1 Locating Big Lottery Fund Templates... 2 The Word 2013 Screen... 3 Things You Might Be Looking For... 4 What s New On The Ribbon... 5 The Quick Access Toolbar...

More information

Microsoft Excel Important Notice

Microsoft Excel Important Notice Microsoft Excel 2013 Important Notice All candidates who follow an ICDL/ECDL course must have an official ICDL/ECDL Registration Number (which is proof of your Profile Number with ICDL/ECDL and will track

More information

NOBLE INSTITUTE OF COMPUTER ACCOUNTANCY

NOBLE INSTITUTE OF COMPUTER ACCOUNTANCY 1 The ability to combine name and addressed with a standard document is called a. document formatting b. database management c. mail merge d. form letters 2. Which enables us to send the same letter to

More information

PowerPoint Multiple OUTPUT types Paper Onscreen Web presentation 6 x 6 rule 6 points 6 words

PowerPoint Multiple OUTPUT types Paper Onscreen Web presentation 6 x 6 rule 6 points 6 words PowerPoint 1 PowerPoint Multiple OUTPUT types: Paper Onscreen Web presentation 6 x 6 rule no more than 6 points per slide No more than 6 words per point Placeholder area of a slide reserved for text or

More information

Word 2003: Formatting

Word 2003: Formatting Word 2003: Formatting BUCS IT Training Table of Contents INTRODUCTION...1 SPECIAL FORMATTING...1 PAGE NUMBERING...3 FIND & REPLACE...3 AUTOCORRECT...4 AUTOCOMPLETE...11 HORIZONTAL RULER...12 SWITCH ON

More information

San Pedro Junior College. WORD PROCESSING (Microsoft Word 2016) Week 4-7

San Pedro Junior College. WORD PROCESSING (Microsoft Word 2016) Week 4-7 WORD PROCESSING (Microsoft Word 2016) Week 4-7 Creating a New Document In Word, there are several ways to create new document, open existing documents, and save documents: Click the File menu tab and then

More information

Getting Started with. Office 2008

Getting Started with. Office 2008 Getting Started with Office 2008 Copyright 2010 - Information Technology Services Kennesaw State University This document may be downloaded, printed, or copied, for educational use, without further permission

More information

Microsoft Office Suite

Microsoft Office Suite Module 3 MODULE OVERVIEW Part 1 Getting Familiar with Microsoft Word 2007 for Windows Part 2 Microsoft Word 2007 Basic Features Part 3 More Basic Features Microsoft Office Suite Microsoft Word 2007 Part

More information

Word Processing. 3.1 Using the Application

Word Processing. 3.1 Using the Application 03 1371 ch03 3/17/04 8:09 AM Page 45 3............................................. Word Processing 3.1 Using the Application 3.1.1 First Steps With Word Processing 1. Which of the following will launch

More information

Fall 2016 Exam Review 3 Module Test

Fall 2016 Exam Review 3 Module Test 1. What is the block of text at the bottom of the page called? Header Footer Document Area Ribbon 2. Which word processing tool can help you find synonyms to improve your word choice? Spelling and Grammar

More information

Microsoft Office Illustrated. Creating Documents with Word 2007

Microsoft Office Illustrated. Creating Documents with Word 2007 Microsoft Office 2007- Illustrated Creating Documents with Word 2007 Objectives Understand word processing software Explore the Word program window Start a document Save a document 2 Objectives Select

More information

MS Word Professional Document Alignment

MS Word Professional Document Alignment MS Word Professional Document Alignment Table of Contents CHARACTER VS. PARAGRAPH FORMATTING...5 Character formatting...5 Paragraph Formatting...5 USING SHOW/HIDE TO REVEAL NON-PRINTING CHARACTERS...5

More information