NetMotion Integration with GreenRADIUS - Quick Start Guide
|
|
- Claude Carter
- 5 years ago
- Views:
Transcription
1 NetMotion Integration with GreenRADIUS - Quick Start Guide March 15, GreenRADIUS. All rights reserved. Page 1 of 16
2 2016 GreenRADIUS. All rights reserved. Page 2 of 16
3 Contents 1 GreenRADIUS Setup General Configuration Domain Configuration NetMotion Mobility XE Server Configuration NetMotion Mobility XE Client Configuration GreenRADIUS. All rights reserved. Page 3 of 16
4 1 GreenRADIUS Setup Before starting, ensure GreenRADIUS is configured correctly to communicate with the local Active Directory or LDAP domain, as well as with the validation service (either local validation or the YubiCloud). Full instructions on setting up GreenRADIUS can be found in the GreenRADIUS Configuration Guide, available on the GreenRocket Security Website here: General Configuration 1. Open the GreenRADIUS Web admin interface and navigate to the Global Configuration Domain Tab. 2. Create new domain for importing users from Active Directory. Keep the name of the domain as that of the name of domain in Active Directory. See the image given below. 3. After creating domain, import users from Active Directory. Assign Yubikey to one or more users. These Yubikey assigned users will be used for two factor authentication for Netmotion. 1.2 Domain Configuration 1. Open the GreenRADIUS Webmin interface and navigate to the GreenRADIUS Domain Tab. Click the domain associated with your NetMotion Mobility XE Active Directory. 2. In the Selected Domain page, click on the Configuration Tab 3. In the Selected Domain Configuration page, locate the Add Client Section. In the Add Client section, enter the following details about the NetMotion Mobility XE installation: a. Client IP enter in the IP address of the NetMotion Mobility XE. If you enter an IP address that ends with 0/24, (such as /24), GreenRADIUS will accept a request from client across the entire subnet on the selected port. b. Client Secret / Confirm Client Secret This is a symmetric shared secret between the GreenRADIUS Service and the RADIUS Client. Please follow best practice secure password policies when creating this shared secret. GreenRADIUS can hold a secret of up to 50 characters GreenRADIUS. All rights reserved. Page 4 of 16
5 4. Click the Add button below the fields to add the NetMotion Mobility XE Server to GreenRADIUS. Once done, the details entered will appear below the Add Client section. 5. In the RADIUS Client section below the Add Client section, check the box next to the newly created NetMotion Mobility XE entry, then click the Enabled Selected button at the bottom. GreenRADIUS will be configured to accept and pass authentication requests to and from the NetMotion Mobility XE Server installation GreenRADIUS. All rights reserved. Page 5 of 16
6 2 NetMotion Mobility XE Server Configuration Before starting, ensure NetMotion Mobility XE is configured correctly using user credentials stored in an Active Directory / LDAP server. Full instructions on setting up NetMotion Mobility XE can be found at 1. Log in to the NetMotion Mobility XE web interface. 2. In the Main Menu, click on Configure tab and select Authentication settings. 3. Locate Authentication settings and then select Protocol option of it. In the Authentication Protocol page, Global Settings, set the Protocol to RADIUS EAP (PEAP and EAP-TLS), then click Apply. 4. In the Authentication RADIUS Servers page, Global Settings, Click the Add Button. This will open the RADIUS Server Entry Page GreenRADIUS. All rights reserved. Page 6 of 16
7 5. In the RADIUS Server Entry Page, locate the field labelled IP Address and enter the IP address of the GreenRADIUS Virtual Appliance. 6. Locate the Port field and verify it is automatically populated with the default RADIUS port value, Leave the NAD ID field blank 8. Locate the Shared Secret field and enter in the Client Secret used in GreenRADIUS. The Shared Secret must match the Client Secret exactly. 9. Confirm the Shared Secret by typing it in again in the Confirm Shared Secret Field. 10. Click the OK button. The Newly created RADIUS server profile should be displayed in the RADIUS Server menu GreenRADIUS. All rights reserved. Page 7 of 16
8 11. RADIUS Server entry will automatically come in the RADIUS Server List section. 12. Follow the steps 5-11 for adding the same GreenRADIUS instance entry in the Configure >> Server Settings >> RADIUS: Device Authentication RADIUS Server List option GreenRADIUS. All rights reserved. Page 8 of 16
9 13. Locate and click Authentication >> EAP-GTC => Auto-Response Model and uncheck the checkbox Global Setting >> Auto-response mode and click on Apply for saving the settings. 14. Locate the option Configure >> Server Settings >> Virtual Address and select Allocation option, then under Global Setting choose DHCP from drop down menu and click on Apply 2016 GreenRADIUS. All rights reserved. Page 9 of 16
10 15. In the Main Menu, click on Configure tab and select Client Settings. 16. Locate and click Logon >> Default Credentials and select Windows user as option in Global Setting >> Default Credentials and click on Apply for saving the settings GreenRADIUS. All rights reserved. Page 10 of 16
11 2016 GreenRADIUS. All rights reserved. Page 11 of 16
12 3 NetMotion Mobility XE Client Configuration 1) Configure one or more windows clients and add them to your Active Directory Domain Services. 2) Access the windows client using Active Directory s administrator credentials for installing the Netmotion Mobility Client. 3) Then, install Netmotion mobility client, setup is like any other software executable install package. But, carefully enter the Netmotion Windows server s IP address in the option Netmotion Server Address which will pop in the intermediate install screen as shown in the image below: 4) Setup will ask for restarting the computer otherwise manually restart the computer. Note: After restarting, login to the client as administrator, and following screen may appear because of the reason that the Netmotion Mobility Client not yet configured. Simply press Skip. 5) Now, configure the client of Windows client. Search the Mobility Client application and open it. The following window will open, and then click on Configuration option GreenRADIUS. All rights reserved. Page 12 of 16
13 6) After clicking Configuration option, the following window will open. Select Server Certificates tab of the Configuration. 7) In Server Certificates tab, uncheck Use the same settings for both Device and User authentication option. Only select User Authentication radio button GreenRADIUS. All rights reserved. Page 13 of 16
14 8) Keep Connect only if server ends with: option blank. Also uncheck Validate Server Certificate checkbox. 9) Select User Certificate option, uncheck Allow User Certificates option and press OK. 10) We have successfully configured the Netmotion Mobility Client. Now, restart the system GreenRADIUS. All rights reserved. Page 14 of 16
15 11) Important, after restarting the computer login using the user to which yubikey is assigned. For example, in the image given below, user 1 of ad.nm.lab doman is used for login. 12) After the above screen Mobility Logon screen will appear, if all setup is configured correctly, then following screen will appear. Change the User name with the user of Active Directory to which the Yubikey is assigned and enter its password in the Password field. Domain name will automatically popup in the Domain field. 13) In the password field append the Yubikey OTP to the typed password and then press OK GreenRADIUS. All rights reserved. Page 15 of 16
16 14) If password is correct and Yubikey OTP is also correct then Netmotion client will connect to the server and network will become active. Netmotion mobility client will also show the status connected to the user ( user1 in this case) GreenRADIUS. All rights reserved. Page 16 of 16
Using EAP Authentication
CHAPTER 6 This chapter explains the sequence of events that occurs and the actions you must take when a profile that is set for EAP authentication is selected for use. The following topics are covered
More informationFor my installation, I created a VMware virtual machine with 128 MB of ram and a.1 GB hard drive (102 MB).
HOWTO: ZeroShell WPA Enterprise by Paul Taylor ZeroShell can be obtained from: http://www.zeroshell.net/eng/ For my installation, I created a VMware virtual machine with 128 MB of ram and a.1 GB hard drive
More informationConfiguring 802.1X Authentication Client for Windows 8
Configuring 802.1X Authentication Client for Windows 8 1. At the Metro Screen, press the windows key on your keyboard together with the alphabets x to go to the Control Panel. Page 1 1.1 In the Control
More informationConfiguring 802.1X Settings on the WAP351
Article ID: 5078 Configuring 802.1X Settings on the WAP351 Objective IEEE 802.1X authentication allows the WAP device to gain access to a secured wired network. You can configure the WAP device as an 802.1X
More informationWindows 7 Configuration for ORU Wireless Networks
Page 1 of 13 Windows 7 Configuration for ORU Wireless Networks Show hidden icons Wireless Signal Strength Indicator Figure 1 Windows 7 Documentation for the ORU- Employee wireless network Clicking the
More informationManual UCSFwpa Configuration for Windows 7
Image not found https://it.ucsf.edu/sites/it.ucsf.edu/themes/custom/it_new/logo.png it.ucsf.edu Published on it.ucsf.edu (https://it.ucsf.edu) Home > Manual UCSFwpa Configuration for Windows 7 Manual UCSFwpa
More informationHOW TO SETUP CFS POLICIES WITH LDAP AND SSO TO RESTRICT INTERNET ACCESS ON CFS 3.0
HOW TO SETUP CFS POLICIES WITH LDAP AND SSO TO RESTRICT INTERNET ACCESS ON CFS 3.0 DESCRIPTION This article explains about how to integrate Premium Content Filtering Service with LDAP (With Single Sign
More informationConfiguring WPA2 for Windows XP
Configuring WPA2 for Windows XP Requirements for wireless using WPA2 on Windows XP Your wireless card must support 802.1x, AES, and WPA2. Your computer must have Windows XP service pack 2 installed and
More informationGreenRADIUS Virtual Appliance. Configuration and Administration Guide Software version: Document version: 1.2
GreenRADIUS Virtual Appliance Configuration and Administration Guide Software version: 1.2.1.0 Document version: 1.2 December 23, 2014 Introduction Disclaimer Green Rocket Security is a provider of online
More information802.1x Radius Setup Guide Working AirLive AP with Win X Radius Server
OvisLink 8000VPN VPN Guide 802.1x Radius Setup Guide Working AirLive AP with Win2003 802.1X Radius Server Table of Content Secured Enterprise Wireless Environment Configuration Guide... 3 WHAT IS THIS
More informationConnecting to the NJITSecure wireless network.
Connecting to the NJITSecure wireless network. 1. Start by going to the Start menu and selecting Control Panel 2. Your control Panel will most likely be in Category view, you will need to change it to
More informationExternal Authentication with Citrix GoToMyPc Corporate Edition Authenticating Users Using SecurAccess Server by SecurEnvoy
External Authentication with Citrix GoToMyPc Corporate Edition Authenticating Users Using SecurAccess Server by SecurEnvoy Contact information SecurEnvoy www.securenvoy.com 0845 2600010 1210 Parkview Arlington
More informationTo Activate your Wireless Account
To Activate your Wireless Account Access to the WVU Wireless network will require you to have an active WVU Active Directory account. Activation involves authenticating your account and setting a password.
More informationInternet access system through the Wireless Network of the University of Bologna (last update )
Internet access system through the Wireless Network of the University of Bologna (last update 7.03.2012) Printable service summary document: the updated version is available online at the following address
More informationUMDNJ Wireless Documentation Windows 7
UMDNJ Wireless Documentation Windows 7 The following documentation will provide instructions for configuring the Microsoft Windows 7 native wireless client. There are wireless adapters that have 3 rd party
More informationInstructions for connecting to winthropsecure
Instructions for connecting to winthropsecure Windows 7/8 Quick Connect Windows 7/8 Manual Wireless Set Up Windows 10 Quick Connect Windows 10 Wireless Set Up Apple Quick Connect Apple Settings Check Windows
More informationEacStudent Wireless Access for Windows XP / 2000 Computers
EacStudent Wireless Access for Windows XP / 2000 Computers These instructions will help you set up your wireless connection on campus. Before beginning, you need: An activated student account on Gila Hank
More informationConfiguring the Client Adapter through the Windows XP Operating System
APPENDIX E Configuring the Client Adapter through the Windows XP Operating System This appendix explains how to configure and use the client adapter with Windows XP. The following topics are covered in
More informationImplementation Guide for protecting Juniper SSL VPN with BlackShield ID
Implementation Guide for protecting Juniper SSL VPN with BlackShield ID Copyright Copyright 2011, CRYPTOCard All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,
More informationHCC Wireless Instructions for Windows 10 (long version)
HCC Wireless Instructions for Windows 10 (long version) TIP: If you are having trouble connecting to the wireless network, or if just need some friendly guidance, the Library staff and Technology Help
More informationManually Configuring Windows 8 for Wireless PittNet
Technology Help Desk 412 624-HELP [4357] http://technology.pitt.edu Manually Configuring Windows 8 for Wireless PittNet If you are not able to connect to Wireless PittNet using our automated wizard, you
More informationNetScaler Radius Authentication. Integration Guide
NetScaler Radius Authentication Integration Guide Copyright 2018 Crossmatch. All rights reserved. Specifications are subject to change without prior otice. The Crossmatch logo and Crossmatch are trademarks
More informationExternal Authentication with Checkpoint R77.20 Authenticating Users Using SecurAccess Server by SecurEnvoy
External Authentication with Checkpoint R77.20 Authenticating Users Using SecurAccess Server by SecurEnvoy Contact information SecurEnvoy www.securenvoy.com 0845 2600010 Merlin House Brunel Road Theale
More informationConfiguring 802.1X Authentication Client for Windows 8
Configuring 802.1X Authentication Client for Windows 8 1. At the Metro Screen, press the windows key on your keyboard together with the alphabets x to go to the Control Panel. Page 1 1.1 In the Control
More informationEacMonsterNet Wireless Access Windows XP Computers
EacMonsterNet Wireless Access Windows XP Computers These instructions will help you set up your wireless connection on campus. Before beginning, you need: An activated student account on Gila Hank On-Line.
More informationResidence Towers Network Access for Windows XP / 2000 Computers
Residence Towers Network Access for Windows XP / 2000 Computers These instructions will help you set up your wired connection on campus. Before beginning, you need: An activated student account on Gila
More informationSecurewireless Windows 7 Setup Guide
Securewireless Windows 7 Setup Guide 1. Click on the wireless icon in the lower right-hand corner of the taskbar and then click on Open Network and Sharing Center. 2. From the Network and Sharing Center
More informationCertificate Management
Certificate Management This guide provides information on...... Configuring the NotifyMDM server to use a Microsoft Active Directory Certificate Authority... Using Certificates from Outside Sources...
More informationConfiguring the Client Adapter through Windows CE.NET
APPENDIX E Configuring the Client Adapter through Windows CE.NET This appendix explains how to configure and use the client adapter with Windows CE.NET. The following topics are covered in this appendix:
More informationInstructions for connecting to the FDIBA Wireless Network. (Windows XP)
Instructions for connecting to the FDIBA Wireless Network (Windows XP) In order to connect, you need your username and password, as well as the FDIBA Root Certificate which you need to install on your
More informationTechnical Note FLX UC 1000/1500 Registering with Shoretel ShoreGear
FLX UC 1000/1500 Registering with Shoretel ShoreGear Date: February 14, 2017 This technical note gives a detailed description on how to register a Revolabs FLX UC 1000/1500 IP & USB conference phone with
More informationAPP NOTES Onsight Rugged Smart Camera Wireless Network Configuration
APP NOTES Onsight Rugged Smart Camera Wireless Network Configuration July 2016 Table of Contents 1. Overview... 4 1.1 Onsight Setup Wizard... 4 1.2 Onsight Wireless Manual Setup... 4 1.3 Hotspot Login...
More informationinstructions for Windows 8
latest version of this document: www.utoronto.ca/teachingstation/tsj/handbook.html Appendix Pre-Configuring your laptop for the TSJr instructions for Windows 8 First thing is to Check your UTORid STATUS
More informationFLX UC 1000/1500 Registering with Shoretel ShoreGear
Technical Note FLX UC 1000/1500 Registering with Shoretel ShoreGear Date: January 15, 2016 This technical note gives a detailed description on how to register a Revolabs FLX UC 1000/1500 IP & USB conference
More informationLog Server Configuration Utility
Email Log Server Configuration Utility Email Log Server is the component that receives log records and processes them into the Log Database. During installation, you configure certain aspects of Log Server
More informationManually Configuring Windows 7 for Wireless PittNet
Technology Help Desk 412 624-HELP [4357] http://technology.pitt.edu Manually Configuring Windows 7 for Wireless PittNet If you are not able to connect to Wireless PittNet using our automated wizard, you
More informationInstructions for connecting to the FDIBA Wireless Network (Windows Vista)
Instructions for connecting to the FDIBA Wireless Network (Windows Vista) In order to connect, you need your username and password, as well as the FDIBA Root Certificate which you need to install on your
More informationConnecting to the eduroam Wireless Network. 1. If you are using a PC, move the. 2. Next Click or Tap the Settings. Help Sheet Windows 8.
Connecting to the eduroam Wireless Network Help Sheet Windows 8 October 2013 This Help Sheet assists Windows 8 users to access the eduroam Wireless Network. 1. If you are using a PC, move the mouse to
More information29 March 2017 SECURITY SERVER INSTALLATION GUIDE
29 March 2017 SECURITY SERVER INSTALLATION GUIDE Contents 1. Introduction... 2 1.1 Assumptions... 2 1.2 Prerequisites... 2 2. Required setups prior the Security Server Installation... 3 1.1 Create domain
More informationPersistent Data Transfer Procedure
This chapter describes exporting and importing Cisco Secure ACS, Release 5.5 or 5.6 data into Cisco ISE, Release 1.4 system using the migration tool. Exporting Data from Cisco Secure ACS, page 1 Analyzing
More informationProtected EAP (PEAP) Application Note
to users of Microsoft Windows 7: Cisco plug-in software modules such as EAP-FAST and PEAP are compatible with Windows 7. You do not need to upgrade these modules when you upgrade to Windows 7. This document
More informationInstall Certificate on the Cisco Secure ACS Appliance for PEAP Clients
Install Certificate on the Cisco Secure ACS Appliance for PEAP Clients Document ID: 64067 Contents Introduction Prerequisites Requirements Components Used Conventions Microsoft Certificate Service Installation
More information700 Fox Glen Barrington, Illinois ph/fx: [847] Setup Guide
Email Setup Guide 1. Mac Mail Page 2 2. ios/iphone Page 7 3. Outlook 2016 Page 12 4. Outlook 2013 Page 20 5. Windows Mail Page 26 Mac Mail 1. Open Mac Mail. 2. In the top left, click Mail, then click Add
More informationWindows 8.1 and Windows 10 a) Connect to wireless network Click on the wireless icon in taskbar. Select detnsw and click on Connect.
1 HSHS BYOD Wireless Connection Windows 8.1 and Windows 10 a) Connect to wireless network Click on the wireless icon in taskbar. Windows 8.1 icon: Windows 10 icon: Select detnsw and click on Connect. or
More informationONUnet ONU Setup Guide for Windows 7
The steps below are designed to help Students, Faculty, and Staff connect to the wireless network at Olivet Nazarene University called ONU on Windows 7 (Guests should use ONUGuest). 1. Right click on the
More informationLab Configuring LEAP/EAP using Cisco Secure ACS (OPTIONAL)
Lab 8.4.5.2 Configuring LEAP/EAP using Cisco Secure ACS (OPTIONAL) Estimated Time: 60 minutes Number of Team Members: Students can work in teams of two. Objective In this lab, the student will learn about
More informationWireless Setup Instructions for Windows 7
Wireless Setup Instructions for Windows 7 1. Make sure that your wireless feature is turned on. (You may need to flip a switch or press a button on your laptop.) On most laptops you should see a light
More informationAruba PEAP-GTC Supplicant Plug-In Guide
Aruba PEAP-GTC Supplicant Plug-In Guide This document describes the installation and configuration of a supplicant plug-in which supports Protected Extensible Authentication Protocol (PEAP) with EAP-Generic
More informationHow to Configure Connection Fallback using Multiple VPN Gateways
How to Configure Connection Fallback using Multiple VPN Gateways Configure the Barracuda VPN Client for Windows to silently switch to fallback VPN gateways when a VPN gateway is not reachable, such as
More informationXcalenets Console Setup Guide. Xcalenets Console Setup Guide (Standalone version)
Xcalenets Console Setup Guide Xcalenets Console Setup Guide (Standalone version) 1 Content CONTENT... 2 Getting Started to Xcalenets Console Setup... 3 Account Level Introduction... 3 Login Console Setup...
More informationInternet Access: Wireless WVU.Encrypted Network Connecting a Windows 7 Device
Internet Access: Wireless WVU.Encrypted Network Connecting a Windows 7 Device Prerequisites An activated MyID account is required to use ResNet s wireless network. If you have not activated your MyID account,
More informationGetting Started with Outlook Web App (OWA)
Getting Started with Outlook Web App (OWA) Office 365 User Guide When first accessing your new Office 365 account, or if you are having any issues with your regular email client, use the below directions
More informationTECHNICAL NOTE MSM & CLEARPASS HOW TO CONFIGURE HPE MSM CONTROLLERS WITH ARUBA CLEARPASS VERSION 3, JUNE 2016
HOW TO CONFIGURE HPE MSM CONTROLLERS WITH ARUBA CLEARPASS VERSION 3, JUNE 2016 CONTENTS Introduction... 5 MSM and AP Deployment Options... 5 MSM User Interfaces... 6 Assumptions... 7 Network Diagram...
More informationIntegrated Information Technology Services (IITS)
Integrated Information Technology Services (IITS) User Guide for Laptops with Windows 7 Network Configuration & Software Installation Version 1.4 Updated as at 15-Aug-11 Table of Contents How to verify
More informationDS2 Support. DS2 / inet System Installation Scenario 2. Scenario 1: - Windows 2003 Server - Utilizing an External SQL Server
DS2 Support DS2 / inet System Installation Scenario 2 Scenario 1: - Windows 2003 Server - Utilizing an External SQL Server Author: Jason May Revision 8.0 Revision Date 03/2009 Overview The purpose of this
More informationA. Post-Onboarding. the device wit be assigned the BYOQ-Provision firewall role in me Aruba Controller.
Volume: 98 Questions Question: 1 Based on the ClearPass and Aruba Controller configuration settings for On boarding shown, which statement accurate describes an employee's new personal device connecting
More informationConfiguring EAP-FAST CHAPTER
CHAPTER 3 This chapter explains how to configure EAP-FAST module settings, such as connection settings, user credentials, and authentication methods. The following topics are covered in this chapter: Accessing
More informationHow do I configure my LPL client to use SSL for incoming mail?
How do I configure my LPL email client to use SSL for incoming mail? When you begin using your modern graphical email client program (e.g., Thunderbird, Mac Mail, Outlook), it will present a series of
More informationPEAP under Unified Wireless Networks with ACS 5.1 and Windows 2003 Server
PEAP under Unified Wireless Networks with ACS 5.1 and Windows 2003 Server Document ID: 112175 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Windows
More informationEkran System v.6.0 Privileged User Accounts and Sessions (PASM)
Ekran System v.6.0 Privileged User Accounts and Sessions (PASM) Table of Contents About... 3 Using Privileged User Accounts... 4 Password Vault Configuration... 5 Defining Domain Administrator Credentials...
More informationExternal Authentication with Ultra Protect v7.2 SSL VPN Authenticating Users Using SecurAccess Server by SecurEnvoy
External Authentication with Ultra Protect v7.2 SSL VPN Authenticating Users Using SecurAccess Server by SecurEnvoy Contact information SecurEnvoy www.securenvoy.com 0845 2600010 1210 Parkview Arlington
More informationAuburn Montgomery AUM Wi-Fi. Windows 7. User s Guide & System Documentation
Auburn Montgomery AUM Wi-Fi Windows 7 User s Guide & System Documentation November 2018 WiFi Windows 7 For: Student Campus Fac Staff AUM WiFi // Windows 7 User s Guide Page 1 Table of Contents Overview
More informationConfigure Outlook to use port 587 with authentication
Configure Outlook 2003 email to use port 587 with authentication In order to send and receive E-mail through your website hosted with FastWebEngine, you can configure Outlook as your preferred E-mail client.
More informationEricom PowerTerm WebConnect
Ericom PowerTerm WebConnect Contents 1 Introduction 2 Prerequisites 3 Baseline 4 Architecture 5 Installation 5.1 Swivel Integration Configuration 5.1.1 Configuring the RADIUS server 5.1.2 Setting up the
More informationEquitrac Integrated for Konica Minolta
Equitrac Integrated for Konica Minolta 1.2 Setup Guide 2014 Equitrac Integrated for Konica Minolta Setup Guide Document Revision History Revision Date Revision List August 9, 2013 Updated for Equitrac
More informationSecure Access Configuration Guide For Wireless Clients
ProCurve Networking Secure Access Configuration Guide For Wireless Clients Secure Access Configuration Guide For Wireless Clients Introduction... 2 Configuration Scenarios... 2 Required Network Services...
More informationCustomer Release Notes
Release Date: July 21, 2009 Customer Release Notes Phaser 3435 System Software 1.70.02.63 General Release Software Release Details Important Purpose System Software Version Firmware Version 1.70.02.63
More informationUsing FileZilla to Connect to Your SFTP Account
Using FileZilla to Connect to Your SFTP Account 2016 17 Academic Year Changes Previously, Wyoming Transcript Center users connected to the National Student Clearinghouse (Clearinghouse) servers using the
More informationBEFORE INSTALLATION: INSTALLATION:
QUICK USER GUIDE INFORMATION TECHNOLOGY SERVICES SWINWIFI INSTALLATION GUIDE FOR WINDOWS XP BEFORE INSTALLATION: 1. Download Swinwifi installer to your desktop. You may download it from http://www.swinburne.edu.my/current_students.php.
More informationAdministration Guide
Administration Guide This guide will cover how to customize and lock down the SCOM 2012 Maintenance Mode Scheduler for your end users. Table of Contents Customize Look and Feel... 2 Enable Auditing of
More informationEquitrac Integrated for Konica Minolta. Setup Guide Equitrac Corporation
Equitrac Integrated for Konica Minolta 1.2 Setup Guide 2012 Equitrac Corporation Equitrac Integrated for Konica Minolta Setup Guide Document Revision History Revision Date Revision List November 1, 2012
More informationSTEP TWO: Configure your network settings (Windows XP and 2000 users start here, Windows 98se / Me start on page 3.)
Hood College Dorm Network Setup Instructions These instructions assume you already have a working computer with a properly installed network interface card (NIC, Ethernet). These instructions are written
More informationManage Administrators and Admin Access Policies
Manage Administrators and Admin Access Policies Role-Based Access Control, on page 1 Cisco ISE Administrators, on page 1 Cisco ISE Administrator Groups, on page 3 Administrative Access to Cisco ISE, on
More informationIntegration Guide. SecureAuth
Integration Guide SecureAuth Revised: 9 November 2016 About This Guide Guide Type Documented Integration WatchGuard or a Technology Partner has provided documentation demonstrating integration. Guide Details
More informationSecurity Management System - Managing Infinova 307X NVR channels. Video display in Security Management System server software
Security Management System - Managing Infinova 307X NVR channels This document describes steps to configure Infinova 307X NVR cameras in Security Management System software. Note Microsoft Visual C++ 2015
More informationWireless Installation Instructions for Windows Vista
1 Click the Windows Orb. 2 Click on Control Panel. 3 Click on Classic View. 2 4 Locate and double-click Windows Firewall. 5 Click on Turn Windows Firewall on or off. 6 In the User Account Control window,
More informationLepideAuditor for File Server. Installation and Configuration Guide
LepideAuditor for File Server Installation and Configuration Guide Table of Contents 1. Introduction... 4 2. Requirements and Prerequisites... 4 2.1 Basic System Requirements... 4 2.2 Supported Servers
More informationIMPORTANT INFORMATION FOR CURTIN WIRELESS ACCESS - STUDENT / WINDOWS XP -
IMPORTANT INFORMATION FOR CURTIN WIRELESS ACCESS - STUDENT / WINDOWS XP - Information required for connection to the Curtin Wireless network: Wireless network names There are two wireless networks operating
More informationHOB HOB RD VPN. RSA SecurID Ready Implementation Guide. Partner Information. Product Information Partner Name. Last Modified: March 3, 2014 HOB
RSA SecurID Ready Implementation Guide Last Modified: March 3, 2014 Partner Information Product Information Partner Name HOB Web Site www.hobsoft.com Product Name Version & Platform 2.1 Product Description
More informationUser Management in Resource Manager
CHAPTER 8 This section describes how to manage user profiles. Topics in this section include: Overview of User Management, page 8-1 Using User Management, page 8-1 Overview of User Management In Resource
More informationNCR. Wi-Fi Setup Assistant. User guide
NCR Wi-Fi Setup Assistant User guide 15 Contents 1 Getting started... 3 1.1 Features... 3 1.2 System Requirements... 3 1.3 Installing Wi-Fi Setup Assistant... 4 2 Configuring a Wi-Fi Printer... 6 2.1 Setup
More informationConnectivity options configuration
Global Connection Settings dialog box, page 1 Connectivity options access, page 5 Advanced details about ICA and RDP connections, page 18 Global Connection Settings dialog box While it is not recommended
More informationClient VPN OS Configuration. Android
Client VPN OS Configuration This article outlines instructions to configure a client VPN connection on commonly-used operating systems. For more information about client VPN, please refer to our documentation.
More informationCSU Talent Management User Guide Search Committee Member How to Log In and View Applications
CSU Talent Management User Guide Search Committee Member How to Log In and View Applications Last Updated: 8/30/2017 my HR Working together. Search Committee Member E-mail Notification 1. The Search Committee
More informationHPE IMC UAM LDAP Authentication Configuration Examples
HPE IMC UAM LDAP Authentication Configuration Examples Part Number: 5200-1373 Software Version: IMC UAM 7.2 (E0402) Document Version: 2 The information in this document is subject to change without notice.
More informationXpy4002-KX, Xpy4004-KX and Xpy8004-KX. setup with DDNS and mobile application
Xpy4002-KX, Xpy4004-KX and Xpy8004-KX setup with DDNS and mobile application Xpy4002-KX, Xpy4004-KX and Xpy8004-KX setup with DDNS and mobile application Preliminary steps: 1. 2. 3. Nexxt Solutions DVR
More informationESET SECURE AUTHENTICATION. Cisco ASA Internet Protocol Security (IPSec) VPN Integration Guide
ESET SECURE AUTHENTICATION Cisco ASA Internet Protocol Security (IPSec) VPN Integration Guide ESET SECURE AUTHENTICATION Copyright 2016 by ESET, spol. s r.o. ESET Secure Authentication w as developed by
More informationCisco Secure ACS for Windows v3.2 With PEAP MS CHAPv2 Machine Authentication
Cisco Secure ACS for Windows v3.2 With PEAP MS CHAPv2 Machine Authentication Document ID: 43486 Contents Introduction Prerequisites Requirements Components Used Background Theory Conventions Network Diagram
More informationVI. Corente Services Client
VI. Corente Services Client Corente Release 9.1 Manual 9.1.1 Copyright 2014, Oracle and/or its affiliates. All rights reserved. Table of Contents Preface... 5 I. Introduction... 6 II. Corente Client Configuration...
More informationTable of Contents. Why doesn t the phone pass 802.1X authentication?... 16
Table of Contents ABOUT 802.1X... 3 YEALINK PHONES COMPATIBLE WITH 802.1X... 3 CONFIGURING 802.1X SETTINGS... 4 Configuring 802.1X using Configuration Files... 4 Configuring 802.1X via Web User Interface...
More informationZebra Mobile Printer, Zebra Setup Utility, Cisco ACS, Cisco Controller PEAP and WPA-PEAP
Zebra Mobile Printer, Zebra Setup Utility, Cisco ACS, Cisco Controller PEAP and WPA-PEAP This section of the document illustrates the Cisco ACS radius server and how PEAP and WPA-PEAP was configured on
More informationAstaro Security Gateway UTM
Implementation Guide (Version 5.6) Copyright 2013 Deepnet Security Limited Copyright 2013, Deepnet Security. All Rights Reserved. Page 1 Trademarks Deepnet Unified Authentication, MobileID, QuickID, PocketID,
More informationConfiguring the Client Adapter through the Windows XP Operating System
APPENDIX E through the Windows XP Operating System This appendix explains how to configure and use the client adapter with Windows XP. The following topics are covered in this appendix: Overview, page
More informationLicensing the Application CHAPTER
CHAPTER 5 Licensing Application, Configuring E-mail, Cisco.com, Proxy Settings, RCP, SCP Settings, Security, Backup, Authentication Settings and Idle Timeout Settings, Browser and Server Security Mode
More informationPart 1: Connecting to HawkNET on your Windows XP PC
Students are NOT permitted to use any device or product that extends the HawkNET network beyond the intended personal use. These restrictions include, but are not limited to, the use of personal routers,
More informationAerohive Configuration Guide RADIUS Authentication
Aerohive Configuration Guide RADIUS Authentication Aerohive Configuration Guide: RADIUS Authentication 2 Copyright 2012 All rights reserved 330 Gibraltar Drive Sunnyvale, CA 94089 P/N 330068-02, Rev. A
More informationOutlook 2010 Exchange Setup Guide
Outlook 2010 Outlook Profile Configuration This section provides a quick overview of the settings needed to access Outlook client software and configure Outlook to connect to your hosted Exchange mailbox.
More informationAD Sync Client Install Guide. Contents
AD Sync Client Install Guide Contents AD Sync Client Install Guide... 1 Introduction... 2 Deployment Prerequisites... 2 Configure SQL Prerequisites... 3 Switch SQL to Mixed Mode authentication... 3 Create
More informationIQSweb Migration Steps
IQSweb Migration Steps 1. On the old server, perform a backup of the IQSweb database. a. To create a backup copy of the IQSweb database, open SQL Server Management Studio. Start SQL Server Management Studio,
More informationObtaining a login and password to the Online Application
Obtaining a login and password to the Online Application You should have received a password to the online application from Regional Credentialing. If you ve forgotten your password, please contact us.
More information