Controller from an updated msi found here:

Transcription

1 Server not starting on phone Posted by danwilkerson /07/17 13:34 Like several others, I am having issues starting the server on my phone. The windows app shows to be started, but the app on my phone simply says server not started with no i.p. given. I have a rooted GS3, the latest controller, and the app paid for and downloaded from the store. I am currently downloading the sdk so I can run adb, however I noticed you sent a new apk to some other customers. Is the adb workaround a permanent solution or have you developed a fix for this yet? ATT Galaxy S 3 - rooted KitKat Controller from an updated msi found here: VMLite VNC Server version Posted by huisinro /07/17 13:50 Are you running CM11? I will send you a new apk to test. Posted by danwilkerson /07/17 14:38 It should work, it is BeanStalk which is cyanogenmod based. Posted by huisinro /07/17 16:28 OK, that's why, you need our special build for CM related, just sent you another apk by . 1 / 25

2 Posted by anvide /07/17 21:41 How on earth do i make this work with my Galaxy S5 with mac OSX? I keep getting this: "VMLite VNC Server is successfully stopped." I bought the app from google play I downloaded the "VMLiteAndroidAppControllerSetup.msi" you said to donwload on an earlier forum post but thats not for mac... been going through older posts so kinda understand it was after new update but coulndt figure out how to make it work from any of the explanations... help please! Posted by huisinro /07/17 21:42 I will post the Mac version soon, will send you an for now. Posted by danwilkerson /07/18 13:58 Everything works great now! The developer sent me an apk, as per usual with modded phones, the error was on my end. Great product, great support! Having paid for the product, knowing that I had a response within the hour and a working version says a lot about the developer. Product works as advertised! Dan Posted by vegasbomber /07/22 22:38 hi am am in the same boat as as OP, but i am running CM11 & GS4, would it be possible to get the apk sent to me also. I have a valid license but cannot get the sever to run on the phone, i have also downloaded the latest controller off the website. I would love to have this fixed so i can use the software once again. 2 / 25

3 thank you PS: sorry for the thread jacking...but if i have to create a new thread i will.. chris Posted by SebDk /07/23 01:15 Hi there, I have the same problem with my S4 mini with CM11. I have sent an to get the last apk. S. Posted by Jense /07/24 04:49 same here, please send me the apk via mail! Posted by takzo /07/29 13:07 same for me pls Posted by huisinro /07/29 16:21 Hi takzo84, are you also running CM11 Android 4.4.2? Posted by takzo /07/30 01:08 3 / 25

4 Note rooted with Odin Posted by danny /07/30 06:10 Same problem here! Galaxy S4 with CM11 Android Please send me the apk!! Thx Posted by jesuave /08/05 12:11 I have the same problem Just purchased your App from the Google Play Store It says it started on the VMLite Android App, but does not start on the phone. Running Android Version on Samsung Note 2 Phone SPH-L900 (Not Rooted) Here is the output from VMLite Android App: Instructions: (1) Enable USB debugging on your android device by going to: Settings > Developer options > USB debugging, or Settings > Applications > Development > USB debugging (2) Connect your android device to this PC with USB cable. (3) Click the above Start VMLite VNC Server button. Starting VMLite VNC Server on device... Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 42f7648c4a8b9f31 device 4 / 25

5 VMLite VNC Server is successfully stopped on 42f7648c4a8b9f31. VMLite VNC Server is successfully stopped on 42f7648c4a8b9f31. Starting VMLite VNC Server on device... VMLite VNC Server is successfully started on 42f7648c4a8b9f31. You can now safely disconnect your device from this PC, and quit this program. If you can't connect to the IP address shown on device, you can click the USB Connect button to set up USB connection. Posted by huisinro /08/05 20:59 Hi jesuave, I sent you a new version of the PC android controller app, should work now. Posted by takzo /08/06 00:42 can you send it to me too? Is not working even with the phone without root. Posted by takzo /08/07 05:09 huisinro wrote: Hi jesuave, I sent you a new version of the PC android controller app, should work now. Pls, send it to me too Posted by fdrakekm /08/08 06:55 I am having the same problem as the others. Just purchased the app for my Samsung Galaxy S4 (not rooted) and the server won't start. Would appreciate an APK that works on this device. 5 / 25

6 Thanks. Posted by huisinro /08/08 07:22 Hi takzo84, I sent you the download info yesterday. Here is the info: Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: Posted by takzo /08/08 11:24 tnx Posted by MikeyMZ /08/21 04:51 Hi there, having same issue here :( :( Installed CM11 on my S4 today. Installed VMLite VNC Server. It always shows "Server is stopped" :( How can we fix this? Or did i payed for non working tool? :( Kind regards Mikey 6 / 25

7 Posted by huisinro /08/21 09:50 Hi Mikey, I sent you a new apk in , which should work on CM11. Posted by fdrakekm /08/21 10:00 Hi - I had posted about the same problem a couple of weeks ago, but hadn't heard back. Can you send me the APK with the fix as well? Thanks! Frank Posted by huisinro /08/21 10:07 Hi Frank, sorry about that. Just sent it via . Posted by MikeyMZ /08/21 10:49 Thanks... works fine know :) Posted by tzhexuan /08/26 09:07 can i have the apk too? it's not working for my CM11 M9. Thanks! 7 / 25

8 Posted by g.borgobello /09/03 01:40 I have the same problem Just purchased your App from the Google Play Store It says it started on the VMLite Android App, but does not start on the phone. Running Android Version on Samsung Note 3 SM-N9005 (Not Rooted) Kernel Build KOT49H.N9005XXUGNG1 On the pc say: Starting VMLite VNC Server on device... VMLite VNC Server is successfully started on 4007b but on the phone say: SERVER IS STOPPED and cannot display ip or other The USB debug is enabled. I have tried to uninstall and reinstall the App, but not work. Can you help? Thanks Giuseppe Posted by NiCoXis /09/03 14:08 Am having the exact same issue as Giuseppe, Also running Android but on a Galaxy S5 (not rooted). Posted by kincerb /09/04 14:24 8 / 25

9 Hello, Is this going to be updated in the Play Store anytime soon, or could I also get the updated apk? I have the same problem. I was running it fine on a few Sense based ROMs on a HTC One M7. I switched to a CM11 derivative and now the server won't start. Thanks Posted by kincerb /09/04 14:27 Hello, Is this going to be updated in the Play Store anytime soon, or could I also get the updated apk? I have the same problem. I was running it fine on a few Sense based ROMs on a HTC One M7. I switched to a CM11 derivative and now the server won't start. Thanks Posted by huisinro /09/04 18:06 For Samsung devices with Android 4.3 or 4.4 issues, Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: For CM11 issues, I sent a new apk via s Posted by kincerb /09/11 14:59 Thank you, the new apk worked for me. I don't use the desktop program as I use Linux, so I can't speak to that, sorry. 9 / 25

10 Posted by ground /09/12 04:17 Hello, Ive the same problem. Please send me the apk. Sincerely. Posted by NiCoXis /09/12 13:29 huisinro wrote: For Samsung devices with Android 4.3 or 4.4 issues, Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: For CM11 issues, I sent a new apk via s It works now, although very slowly and laggy on both HTML and Java interface... Posted by DiniMueter /09/13 14:48 Hi, I'm running CM11 Android on a OnePlus and have the same problem, when I try to connect with my Mac. Is there a new osx version of the mac client program available? Posted by pallalit /09/17 09:35 10 / 25

11 I am facing the same problem, the VMlite android app controller is showing server running but App on android show server is stopped, on clicking Start it show pop up to start controller app on device Posted by huisinro /09/17 10:03 Hi Pallalit, Are you running CM 11? what is the device and android versions? Posted by mscharfetter /09/18 00:03 Hi, i have the same problem - Controller says VNC server is running, but on phone it appears as stopped. Find below my settings: Phone: Samsung Galaxy 5 Android Version: Model-No: SM-GF900F Kernel-Version: Build-No: KOT49H.G900FXXU1ANG2 PC: Windows 7 Can you please help. Thx a lot Best Regards Matthias Posted by huisinro /09/18 08:34 You need to use our internal build for the desktop program: Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB 11 / 25

12 You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: Posted by dralle /09/19 23:30 Posted by dralle /09/19 23:31 I had the same problem with the server not starting on my Samsung Note 2 on ATT running I downloaded the Controller above and then was able to start the server. Why-o-why don't you make this version of the Controller available for download via the normal channel? I just spent 3 hours trying to make this thing work, and then discover there's a fix and I just have to find it buried on the Internet on Page 7 of some forum? Common guys... So, it is working now, but causes my phone to reboot constantly!!!!!! Like every 2 or three minutes. Did I mention - IT IS REBOOTING MY PHONE? :woohoo: What's going on here? Matt Posted by omerg /09/20 22:12 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Thanks. 12 / 25

13 Posted by omerg /09/20 22:20 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Thanks. Posted by omerg /09/20 22:24 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Posted by omerg /09/20 22:24 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Posted by omerg /09/20 22:24 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM / 25

14 Posted by omerg /09/20 22:24 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Posted by omerg /09/20 22:24 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Posted by omerg /09/20 22:24 Hi, I'm having the same issue. I have paid for the app on the play store but the server does't starts. I'm using SGS3 with CM11. Posted by ViZiR /10/11 02:31 Hi, I have a rooted Oneplus One with CM11S (v38r) and the server is not starting (even with the windows app). Can you please advise? Regards, 14 / 25

15 Posted by jmorrow /10/16 10:40 Im having the same issue on my stock galaxy s4. I tried downliading the new controller msi you posted. Keep getting error /files/vmlitevncserver: can't execute, permission denied. Connect to gui, resort udp method: permission denied. Pls help. Posted by jmorrow /10/16 10:41 Im having the same issue on my stock galaxy s4. I tried downliading the new controller msi you posted. Keep getting error /files/vmlitevncserver: can't execute, permission denied. Connect to gui, resort udp method: permission denied. Pls help. Posted by jmorrow /10/16 10:44 Im having the same issue on my stock galaxy s4. I tried downliading the new controller msi you posted. Keep getting error /files/vmlitevncserver: can't execute, permission denied. Connect to gui, resort udp method: permission denied. Pls help. Posted by jmorrow /10/16 10:45 Im having the same issue on my stock galaxy s4. I tried downliading the new controller msi you posted. Keep getting error /files/vmlitevncserver: can't execute, permission denied. Connect to gui, resort udp method: permission denied. Pls help. Posted by pa0los /10/20 02:04 I'm also having problems starting the server on CM11. Please send me the corrected apk 15 / 25

16 Posted by gautambabbar /10/21 07:18 Samsung Galaxy s5, Just purchased VMLite VNC Server. Server does not start on the phone. The Windows application shows that the server is started but nothing on the phone : Starting VMLite VNC Server on device... VMLite VNC Server is successfully started on 44599a8e. You can now safely disconnect your device from this PC, and quit this program. If you can't connect to the IP address shown on device, you can click the USB Connect button to set up USB connection. Posted by gautambabbar /10/21 07:20 Samsung Galaxy s5, Just purchased VMLite VNC Server. Server does not start on the phone. The Windows application shows that the server is started but nothing on the phone : Starting VMLite VNC Server on device... VMLite VNC Server is successfully started on 44599a8e. You can now safely disconnect your device from this PC, and quit this program. If you can't connect to the IP address shown on device, you can click the USB Connect button to set up USB connection. Posted by huisinro /10/21 08:51 You need to use our internal build for the desktop program: Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: 16 / 25

17 Posted by pa0los /10/21 11:41 I already tried the new VAAC program, without effect. I have the same message "VMLite VNC Server is successfully started..." but android app still shows "Server stopped" Posted by adelgado /10/21 15:26 I just bought the app on Google Play for a stock Samsung Note II. I'm using VMLite Android App Controller Version (144) on OS X, but keep getting: Starting VMLite VNC Server on device... Checking Android devices... List of devices attached device VMLite VNC Server is successfully stopped. Posted by huisinro /10/21 19:11 Are you running CM 11, Android 4.4? If so, you need a new apk from us. please . We will post an update in next week to the google play for the vnc server app and the desktop program. pa0los wrote: I already tried the new VAAC program, without effect. I have the same message "VMLite VNC Server is successfully started..." but android app still shows "Server stopped" Posted by gautambabbar /10/22 06:20 Thanks. Seems to be working now. Appreciate you help. Can this version be posted on the web? 17 / 25

18 Posted by kmay /10/22 08:41 I just purchased this yesterday and I am having the same problems. I would like to try the new apk. My galaxy s4 is rooted running 4.4 Posted by liouma /10/25 16:29 Hi I'm using CM11 on a GS4. Of course I have a paid app. The app opens 'server is stopped'. When I start it sometimes it crashes, sometimes a message popup asking to use vaac on a desktop computer. I installed "VMLite Android App Controller" on the pc with all drivers etc... but it never detects the device. Thank you for your help... Posted by liouma /10/25 16:29 Hi I'm using CM11 on a GS4. Of course I have a paid app. The app opens 'server is stopped'. When I start it sometimes it crashes, sometimes a message popup asking to use vaac on a desktop computer. I installed "VMLite Android App Controller" on the pc with all drivers etc... but it never detects the device. Thank you for your help... Posted by liouma /10/25 16:31 Hi I'm using CM11 on a GS4. Of course I have a paid app. The app opens 'server is stopped'. When I start it sometimes it crashes, sometimes a message popup asking to use vaac on a desktop computer. I installed "VMLite Android App Controller" on the pc with all drivers etc... but it never detects the device. Thank you for your help / 25

19 Posted by liouma /10/25 16:33 Hi I'm using CM11 on a GS4. Of course I have a paid app. The app opens 'server is stopped'. When I start it sometimes it crashes, sometimes a message popup asking to use vaac on a desktop computer. I installed "VMLite Android App Controller" on the pc with all drivers etc... but it never detects the device. Thank you for your help... Posted by Jobu /10/29 19:07 Hi there, I've purchased this app from the Google store, but cannot start the VNC service on the phone ilke many others. I am using a Galaxy S4, not rooted however. Model Number: SGH-M919V Android Version: Kernel Version: dpi@swdd5914 #1 Build Number: KOT49H.M919VVLUFNE1 I have tried changing the USB mode to PTP instead of MTP as recommended with no luck. I've installed the latest VMLite Android App Controller and downloaded the latest apk from Google. Launching VAAC, i get prompted by the phone if i want to allow the connection which i go ahead (twice). VAAC indicates the VNC Service is now running, even though it is not on the phone. The output is below. Please help! Jobu Instructions: (1) Enable USB debugging on your android device by going to: Settings > Developer options > USB debugging, or Settings > Applications > Development > USB debugging (2) Connect your android device to this PC with USB cable. (3) Click the above Start VMLite VNC Server button. Setting up USB connection / 25

20 Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 651a39f7 unauthorized Error: no android device is connected. Setting up USB connection... Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 651a39f7 device VMLite VNC Server is successfully stopped on 651a39f7. You can connect to the following address with VNC clients while the android device is connected with USB: localhost:5901 You can browse to the following address while the android device is connected with USB: Posted by Jobu /10/29 19:11 Hi there, I've purchased this app from the Google store, but cannot start the VNC service on the phone ilke many others. I am using a Galaxy S4, not rooted however. Model Number: SGH-M919V Android Version: Kernel Version: dpi@swdd5914 #1 Build Number: KOT49H.M919VVLUFNE1 I have tried changing the USB mode to PTP instead of MTP as recommended with no luck. I've installed the latest VMLite Android App Controller and downloaded the latest apk from Google. Launching VAAC, i get prompted by the phone if i want to allow the connection which i go ahead (twice). VAAC indicates the VNC Service is now running, even though it is not on the phone. The output is below. Please help! Jobu 20 / 25

21 Instructions: (1) Enable USB debugging on your android device by going to: Settings > Developer options > USB debugging, or Settings > Applications > Development > USB debugging (2) Connect your android device to this PC with USB cable. (3) Click the above Start VMLite VNC Server button. Setting up USB connection... Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 651a39f7 unauthorized Error: no android device is connected. Setting up USB connection... Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 651a39f7 device VMLite VNC Server is successfully stopped on 651a39f7. You can connect to the following address with VNC clients while the android device is connected with USB: localhost:5901 You can browse to the following address while the android device is connected with USB: Posted by huisinro /10/29 22:31 You need to use our internal build for the desktop program: Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: 21 / 25

22 Posted by Jobu /10/31 18:12 Thanks, that seem to do the trick Much appreciated, thanks for the quick support! Jobu Posted by /11/14 06:47 Hi, im using CM11 on my Galaxy Ace and experiencing the same "Server is stopped"-bug (paid playstore app). Could you me the new apk please? Posted by Mullie /11/15 04:09 I'm also in the CM11 boat (on GS4)... can you mail me the updated apk please? Tx! Posted by dkorth /11/19 20:58 I'm running the OnePlus One with CM 11s. Can I get the apk for CM so this will work for me? Posted by dkorth /11/19 20:58 I'm running the OnePlus One with CM 11s. Can I get the apk for CM so this will work for me? Posted by Jobu /01/13 18:47 22 / 25

23 Hi there, This has been working flawlessly until about last month. My initial problem was that I couldn't start the VNC service at all, but that issue was resolved using the internal build that was provided to me as in the previous post. However within the last month or so, the VNC service seems to have started crashing and I am having to restart the service constantly every couple hours. The Galaxy S4 i have is not rooted, and is relatively clean for the most part (minimal apps installed). I have noticed that on the screen it always flashed checking for licenses for 2 minutes which didn't seem to be there before. I'm running the VMLite VNC server version that i purchased from the Play Store and using the recommended internal build VAAC as recommended in the previous post which resolved my issue before. My hardware is still the same: Model Number: SGH-M919V Android Version: Kernel Version: dpi@swdd5914 #1 Build Number: KOT49H.M919VVLUFNE1 Please help! Jobu Posted by Jobu /01/13 18:53 This was the previous post and solution btw: Hi there, I've purchased this app from the Google store, but cannot start the VNC service on the phone ilke many others. I am using a Galaxy S4, not rooted however. Model Number: SGH-M919V Android Version: Kernel Version: dpi@swdd5914 #1 Build Number: KOT49H.M919VVLUFNE1 I have tried changing the USB mode to PTP instead of MTP as recommended with no luck. I've installed the latest VMLite Android App Controller and downloaded the latest apk from Google. Launching VAAC, i get prompted by the phone if i want to allow the connection which i go ahead (twice). 23 / 25

24 VAAC indicates the VNC Service is now running, even though it is not on the phone. The output is below. Please help! Jobu Instructions: (1) Enable USB debugging on your android device by going to: Settings > Developer options > USB debugging, or Settings > Applications > Development > USB debugging (2) Connect your android device to this PC with USB cable. (3) Click the above Start VMLite VNC Server button. Setting up USB connection... Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 651a39f7 unauthorized Error: no android device is connected. Setting up USB connection... Checking Android devices... * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached 651a39f7 device VMLite VNC Server is successfully stopped on 651a39f7. You can connect to the following address with VNC clients while the android device is connected with USB: localhost:5901 You can browse to the following address while the android device is connected with USB: localhost:5801 Jobu316 Fresh Boarder Posts: 4 graphgraph User Online Now Click here to see the profile of this user Report to moderator Quick Reply Reply Quote Edit # Months, 2 Weeks ago Karma: 81 Karma+ Karma- You need to use our internal build for the desktop program: 24 / 25

25 Try to delete the old vaac program, and install this new one. Can you try this latest build of our desktop program? Connect android device to the PC using USB You need to use this new VAAC desktop program, please uninstall the current version completely, then install this new msi: Posted by huisinro /01/13 19:03 Hi Jobu316, So the app on your device displays Checking License? and it never gets installed? what is the error? You don't need the internal VAAC anymore, download from our website: 25 / 25