Express5800/320La Service Pack 3 Installation Notes

Transcription

1 Installation Notes Express5800/320La Service Pack 3 Installation Notes PN:

2 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Solutions (America), Inc. and/or its licensors. NEC Solutions (America), Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC Solutions (America), Inc. product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each product is dependent upon factors such as system configuration, customer data, and operator control. Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC Solutions (America), Inc. To allow for design and specification improvements, the information in this document is subject to change at any time, without notice. Reproduction of this document or portions thereof without prior written approval of NEC Solutions (America), Inc. is prohibited. Trademarks Microsoft and Windows 2000 are registered trademarks of Microsoft Corporation. All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective trademark owners. November 2002 Copyright 2002 NEC Solutions (America), Inc 15 Business Park Way Sacramento, CA All Rights Reserved

3 Express5800/320La Service Pack 3 Installation Notes The Express5800/320La Service Pack 3 Installation Notes contain supplemental instructions needed to install Microsoft Windows 2000 Service Pack 3. At the completion of the installation of Service Pack 3, FT software will have been updated to version 1.3. This document is intended to complement the more detailed procedural documents available from Microsoft. Please read these notes in their entirety before installing Service Pack 3. CONTENTS Prerequisites...3 Hardware...3 Software...3 Installation...3

4 nec

5 Prerequisites Hardware! NEC Express5800/320La Server with Windows 2000 Advanced Server installed. Software! NEC EXPRESSBUILDER ver b-G CD-ROM! Microsoft Service Pack 3 CD-ROM! Free disk space as specified by Microsoft s SP3 requirements. Installation 1. Close all running applications on the 320La server running Windows 2000 Advanced Server. 2. Change the BMC Fault Tolerant Service to Manual Start. Start/settings/control panel/administrative tools/services/ BMC Fault Tolerant Service/startup type Select Manual. 3. Using PROSET, break the teaming of network cards. Start/programs/intel/proset Right click on Team. Select Break Team. 4. Uninstall the PROSET application from your system. Start/settings/control panel/add-remove programs Select Proset. Click Remove. 5. Reboot your server and login as administrator. 6. Insert the EXPRESSBUILDER Version 2.002b-G CD into your CD-ROM drive. The CD auto-runs to the main menu. 7. At the EXPRESSBUILDER Master Control Menu, click Setup. 8. On the fly-out menu, select Update NEC Express5800 system. 9. At the setup message dialog box, click Yes. 10. Another dialog box appears. Disregard this dialog box and remove the EXPRESSBUILDER CD and insert the Microsoft Service Pack 3 (SP3) CD. Express5800/320La Service Pack 3 Installation Notes 3

6 11. The SP3 CD brings up an information window. Close the information window by clicking the X in the upper right hand corner of the display. 12. Click Yes on the displayed dialog box. The relevant files for the 320La server are extracted from the CD. 13. When the Service Pack 3 Setup Wizard window displays, click Next. 14. Click the I Agree radio button, and then click Next. 15. Choose to archive or not archive files (this choice is up to local administration policy). The default is to archive files. Click Next. The Service Pack 3 installation begins. 16. Click Finish to begin the installation of the Service Pack 3 update. 17. Insert the EXPRESSBUILDER CD when prompted. 18. Close the EXPRESSBUILDER window by clicking the X in the upper right hand corner of the display. 19. Click OK at the Setup Message dialog box. 20. Another dialog box displays, click OK. 21. Microsoft OS updates and 320La specific updates are installed. Note: The batch process installing the updates runs for five to seven minutes. At times it may seem that the process has stalled. However, the system is still actively processing the updates. 22. At the completion of the batch process, remove the EXPRESSBUILDER CD. The system will reboot. Note: The system reboots without user intervention. 23. After the Reboot, the Found New Hardware wizard may run. If it does, click on all defaults to complete the process. If prompted to restart Windows, DO NOT RESTART the system. 24. Check disk mirroring, if disabled, enable it again. During disk resynchronization, DO NOT shut down the system. Start/settings/control panel/administrative tools/computer management/ Click on Storage. Click on Disk Management. Select Veritas Volume Manager and then Select Disk View. Check if Disk Mirroring is enabled. 4 Express5800/320La Service Pack 3 Installation Notes

7 If not, make sure that both drives are dynamic disks. Right click on the first drive and select Create Volume 25. Follow the instructions on the screen indicating how to create the new mirror set. 26. Start the Windows 2000 Device Manager, and select View>Device by Connection. 27. Uninstall the Stratus Enclosure Services NEC GEM Processor device. 28. Uninstall the Stratus Fault Tolerant Virtual video device. 29. Uninstall the Virtual Host Bus Adapter device. Note: There will be two instances of this device. Uninstall only the one without any disk drives listed under it. 30. Reboot your system. 31. Install the ESMPRO Agent from the ExpressBuilder Master Control Menu. 32. Enable Teaming on your network cards using PROSET. Start/programs/intel/proset Select Create Team. Select the first network card. Select the second network card. Click on Finish. 33. Apply the Veritas Volume Manager 2.7 for Windows 2000 Hotfix05 from the ExpressBuilder Master Control Menu. 34. Install the NEC ESMPRO report service for Volume Manager from the ExpressBuilder Master Control Menu. 35. The system update to FT software Kit 1.3 and SVP3 has been completed. 36. If your system has any options installed, run the appropriate batch file associated with that option. See the following table. NU515 / Pro 100+ NIC Options Batch File CD\WINNT\W2K\N BAT / QLA12160 HBA CD\WINNT\W2K\N BAT NU516 / QLA1080 HBA CD\WINNT\W2K\N BAT / FT DEU 2X13 HDD D\WINNT\W2K\N BAT / S1200 HOST HBA PKG CD\WINNT\W2K\N BAT NU570/N570-P/NU571/NU571-P Pro1000 Copper / Fiber CD\WINNT\W2K\N BAT Express5800/320La Service Pack 3 Installation Notes 5

8 Note: Shutdown and Restart your system after running batch files. 6 Express5800/320La Service Pack 3 Installation Notes