IBM Maximo Calibration Version 7 Release 5. Installation Guide

Transcription

1 IBM Maximo Calibration Version 7 Release 5 Installation Guide

2 Note Before using this information and the product it supports, read the information in Notices on page 7. This edition applies to version 7, release 5, modification 0of IBM Maximo Calibration and to all subsequent releases and modifications until otherwise indicated in new editions. Copyright IBM Corporation 2007, US Government Users Restricted Rights Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

3 Contents Installing Maximo Calibration Running the installation program Deploying the EAR files on WebLogic Server... 2 Deploying the EAR files on WebSphere Application Server Command syntax for deploying EAR files on WebSphere Application Server Notices Trademarks Copyright IBM Corp. 2007, 2011 iii

4 iv Installation Guide

5 Installing Maximo Calibration The installation of IBM Maximo Calibration Version 7.5 involves installing the product license, deploying the Enterprise Application Archive (EAR) files, and configuring the software. You start the installation programs from the launchpad. Before you begin IBM Maximo Asset Management Version 7.5 must be installed on the same Windows administrative workstation where you plan to install Maximo Calibration Version 7.5, and in the same language as Maximo Calibration Version 7.5. For information about installing Maximo Asset Management, see the IBM Maximo Asset Management 7.5 Installation Guide in the Maximo Asset Management Information Center. For information about upgrading to version 7.5, see the Upgrade Guide, IBM Maximo Products V7.1 to V7.5 on the Maximo Upgrade Resources web site. For information about the hardware, software, and network requirements for your product, see the Overview and Planning page on the Maximo Asset Management wiki. About this task You must install Maximo Calibration on a Microsoft Windows administrative workstation. The Maximo Calibration EAR files are built on the Windows workstation and later deployed to the application server. Procedure 1. If you are upgrading to Maximo Calibration Version 7.5 from an earlier version of Maximo Calibration (Version 7.1, , 7.1.1, or 7.1.2), update your environment data. 2. Prepare to install. 3. Install Maximo Calibration. 4. If you use Oracle WebLogic Server, deploy the EAR files. 5. For IBM WebSphere Application Server environments: The EAR files were installed during the IBM Maximo Asset Management installation. If this task was deferred during the Maximo Asset Management installation, deploy the EAR files. Running the installation program You can start the installation program for Maximo Calibration from the launchpad. About this task You access the product software either from IBM Passport Advantage or from the product DVD if you requested one. To download your product from IBM Passport Advantage, follow the instructions in the download document. Copyright IBM Corp. 2007,

6 The launchpad is automatically started when you run the product DVD. If the Windows autorun feature is disabled, you can start the launchpad by running the launchpad.exe program from the root directory of the product DVD. If you run 64-bit applications, use launchpad64.exe. Procedure 1. Start the launchpad. 2. Select a language for the installation program, and click OK. 3. Click Install Product from the menu of options on the left. 4. Select the installation path for Maximo Asset Management from the drop-down menu. 5. Click IBM Maximo Calibration. 6. Follow the steps in the installation program. 7. If the Package Options window opens, ensure that the check box to defer updating the Maximo database is cleared, and the check box to defer redeploying the Maximo applications is cleared. If you are installing additional products, you can choose to defer the Maximo application redeployment option. If the package options were specified during the Maximo Asset Management installation, the Package Options window might not open. 8. Continue the installation program until the Pre-Install Summary window opens. If the system check passes successfully, no error messages appear under System Check Messages. 9. If any error messages are shown, make a note of the message identifiers, and stop the installation. Contact your system administrator. 10. When the installation is complete, from the Package Successfully Deployed window, click Done. What to do next Download and install the latest hot fix to ensure that you have the most current build with all recent fixes. The latest hot fixes are on the IBM Support Portal for Maximo Calibration. Review any existing release notes for this product at Release Notes for Maximo Calibration. Additionally, perform the following steps: v To check the results of the language package installation, review the language package installation log file, TDToolkitdate-time.log, in the Maximo_home\maximo\ tools\maximo\log directory. v If you use WebLogic Server, deploy the EAR files. v If you use WebSphere Application Server, the installation is complete. You can start Maximo Calibration. However, if your environment requires you to deploy the EAR files manually, and this task was deferred during the Maximo Asset Management installation, deploy the EAR files. Deploying the EAR files on WebLogic Server 2 Installation Guide If you use the WebLogic Server, after you install Maximo Calibration, you must deploy the EAR files from the WebLogic Server console. Deploying the EAR files starts the application server.

7 Before you begin v v v The EAR files must be deployed after the Maximo database is updated. If you manually update the database (by running the updatedb command), make sure that you do so before you deploy the EAR files. On a Windows operating system: If the MAXIMOSERVER server is not running, start it from a command prompt. On a UNIX operating system: Ensure that the WebLogic Server daemon is running. To view the WebLogic Server console, you must have a Java Virtual Machine installed. Procedure 1. Change to the mydomain directory. Operating system Windows UNIX Location From a command prompt, change the path to drive:\oracle_installation_location\ user_projects\domain\mydomain Open a command prompt, and change the path to /home/mxadmin/oracle/ user_projects/domains/mydomain 2. Start WebLogic Server. Operating system Windows UNIX Command startweblogic.cmd./startweblogic.sh 3. Type the WebLogic Server user name and password. 4. Start the MAXIMOSERVER administration console by typing the following address in the address bar of your browser: 5. Log on to the WebLogic Server console. 6. Follow the instructions in the WebLogic Server console help to deploy the maximo.ear file and the maximoiehs.ear file. Results The installation is complete. You can start Maximo Calibration. Deploying the EAR files on WebSphere Application Server You can manually deploy Maximo Calibration EAR files on WebSphere Application Server. You perform this task if your organization has application deployment restrictions that require that you deploy application files manually. About this task The EAR files are installed on WebSphere Application Server during the Maximo Asset Management installation. If the deployment of the EAR files was deferred during the Maximo Asset Management installation, you can deploy the EAR files manually. Installing Maximo Calibration 3

8 Procedure 1. Deploy the Maximo EAR file: PRODUCT_HOME\jacl\solutions\DeployApplication.[bat sh] WASAdminUserName WASAdminPassword "MAXIMO" WASNodeName WASApplicationServerName "PRODUCT_HOME\maximo\deployment\default\maximo.ear" WASVirtualHost WASWebServerName 2. Deploy the Maximo help system EAR file: PRODUCT_HOME\jacl\solutions\DeployApplication.[bat sh] WASAdminUserName WASAdminPassword "MAXIMOIEHS" WASNodeName WASApplicationServerName "PRODUCT_HOME\maximo\deployment\default\maximoiehs.ear" WASVirtualHost WASWebServerName Related reference Command syntax for deploying EAR files on WebSphere Application Server You use parameters in the command syntax when you manually deploy the EAR files on WebSphere Application Server. Command syntax for deploying EAR files on WebSphere Application Server You use parameters in the command syntax when you manually deploy the EAR files on WebSphere Application Server. Syntax of the commands to deploy EAR files The syntax of the commands for deploying the EAR files includes the following parameters. Parameters WASAdminUserName A WebSphere Application Server Network Deployment account with deployment privileges. WASAdminPassword The password of the user who is specified in the WASAdminUserName parameter. WASNodeName The name of the WebSphere Application Server Network Deployment node. WASApplicationServerName The name of the WebSphere Application Server Network Deployment application server. WASVirtualHost The name of the WebSphere Application Server Network Deployment virtual host. WASWebServerName The name of the WebSphere Application Server Network Deployment web server. 4 Installation Guide

9 Related tasks Deploying the EAR files on WebSphere Application Server on page 3 You can manually deploy Maximo Calibration EAR files on WebSphere Application Server. You perform this task if your organization has application deployment restrictions that require that you deploy application files manually. Installing Maximo Calibration 5

10 6 Installation Guide

11 Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-ibm product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan Ltd , Shimotsuruma, Yamato-shi Kanagawa Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-ibm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. Copyright IBM Corp. 2007,

12 IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/ Burnet Road Austin, TX U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-ibm products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-ibm products. Questions on the capabilities of non-ibm products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. COPYRIGHT LICENSE: This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs. Each copy or any portion of these sample programs or any derivative work, must include a copyright notice as follows: your company name) (year). Portions of this code are derived from IBM Corp. Sample Programs. 8 Installation Guide

13 Copyright IBM Corp. _enter the year or years_. All rights reserved. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at Copyright and trademark information at Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Other product and service names might be trademarks of IBM or other companies. Notices 9

14 10 Installation Guide

15

16 Printed in USA