External Boot Check ExBoot ID-003 V1.13 ROM: DBC7. Sum: Years & MRI ID No.

Transcription

1 Software Information Sheet JCM American Corporation TEL JCM Europe GmbH TEL JCM Gold (H.K.) Ltd. TEL J-Cash Machine (Thailand) Co., Ltd TEL (Headquarters Japan) TEL General Information Model Name: UBA-24-SS/SU, UBA-14-SS SW.Req. No. C A7766 File Name u14_25136_id003.usa Date: (mm.dd.yyyy) Rev: C2 SW. Name: UBA-14/24 (USA)-SS/SU ID-003 Note: - SW. Version: Guide: None Country (Code): United States of America (USA) CRC (seed= 0000): BE96 Currency: Dollar Direction: 4 Way External Boot External Boot Check ExBoot ID-003 V1.13 ROM: Sum: DBC7 Denomination: Denom. Printed Issued MRI# Denom. Printed Issued MRI# Years & MRI ID No. 1 '85-'09 USD1.1A, B 20 '99-'01 USD th Edition 5 '93-'95 USD5.1B 20 '04-'09 USD '99- USD '90-'93 USD '06-'09 USD '96-'01 USD '90-'95 USD10.1B 50 '04-'09 USD '99-'03 USD '90-'93 USD100.1B 10 '04-'09 USD '96-'06 USD '90-'95 USD20.1B 100 '09 USD100.3 JCM Tool Suite: JCM Tool Suite Standard Edition V1.18 ACCLOAD Program: NEW ACCLOAD for UBA Tool Suite Edition V1.07 Barcode Ticket: Accepts JCM specified barcode tickets. ICB: ICB feature is enabled or disabled with ICB Enable / Disable setting barcode ticket or with ICB Enable / Disable Command. EPROM: 1 Mbit, 45 nano-second data access, or faster. ST Part M27C FX1 or equivalent Modifications: (Version ) 06/2013 Banknote Recognition: Improved the security of all denominations. Banknote Recognition: Added counterfeit measures for USD100.2 notes. Machine Operation: Modified motor lock check. Machine Operation: Added stacker mech/power hit tamper countermeasures. Machine Operation: Revised to not send Vend Valid until stacking has completed. Interface: Changed 3rd byte of Secret Number Interface: Add a command to change the board rate speed during software download Interface: When an error occurs while stacking, UBA will try to determine if the note was stacked before sending the credit message and reporting the error. (Version ) Banknote Recognition: Added counterfeit countermeasures for USD100.2 notes. Banknote Recognition: Improved the acceptance rate of all denominations. Banknote Recognition: Added copy note measures for 5, 10, 20, 50 and 100 dollar notes. Interface: Added the optional function to report the status of the entrance sensor in the DISABLE status in ID-003. o This function will be enabled/disabled with the Entrance Sensor Event of the OPTIONAL FUNCTION as same as DBV-EUR firmware V (For more details, refer to the attached document, ID-003 Entrance Sensor Status Report Function Specification.doc. ) o In inhibit state and Entrance Sensor Event is Enabled, start to reject when the entrance sensors are blocked o In inhibit state and Entrance Sensor Event is Enabled, If the credit card cannot be rejected after a 45 seconds UBA will report JAM in Acceptor Interface: Fix ICB barcode ticket number for nulti barcode ticket accept function. 1/5

2 Interface: Fix UBA stop communication when continuous reception Enable and Disable command form Host. (Version ) -08/2010 Banknote Recognition: Added banknote recognition for USD100.3 notes. Banknote Recognition: Improved acceptance rate for USD100.2 notes. Banknote Recognition: Added counterfeit countermeasures for USD100.2 notes. Machine Operation: Added fishing countermeasures. Machine Operation: Add sensor adjustment countermeasure. Machine Operation: In the previous software, when the cash box was removed while a note was kept at the entry, Cheated was reported instead of Pause. This has been corrected in this version. Machine Operation: Added ICB queue. Machine Operation: ICB date/time correction - byte order. Machine Operation: Added ICB Checksum error countermeasure. Machine Operation: Removed the high security mode option and assigned the $100 disable to dip switch #7. Interface: In the prior software, when the main power of the host machine was supplied, the barcode tickets were rejected even if tickets acceptance was enabled by the ID-003 command. This has been corrected in this version. (Supports the lost of the Setting Command due to a delay in receiving the Reset Command during communication with the ICB.) Interface: In case an abnormal communication sequence appears, communication termination with host controller will be executed. Interface: Added the Encryption feature. Interface: Modified status setting after received the command of "Power up with Bill in Stacker Interface: Modified the processing of download on the USB suite. Interface: Added the LED flash control feature. (Version ) 10/2008 Machine Operation: In the previous version, there was a possibility where the USB Tool Suite download function would not work when all dip switches were Off. This problem has been corrected in version (Version ) 09/2008 Machine Operation: Following Sensor Adjustment or Accload data access, USB interface is reset (USB Tool Suite program interaction). Interface: Customer identified a problem when tickets were not accepted even though Host was sending the correct setup commands. Following a reset command, problem found when UBA was writing to the ICB, the barcode set function was not being stored into memory. (Version ) 01/2008 Banknote Recognition: Added the next generation $5 (2006 Series) notes. (Being released March 2008). Banknote Recognition: Added supernote $100 counterfeit countermeasures. Ticket Recognition: 24 digit barcode tickets is now supported. o Assigned Optional Function DATA-1, Bit 3 to enable / disable 24 digit barcode tickets. o ON: 18 and 24 digit barcode tickets will be accepted. o OFF: Only 18 digit barcode tickets will be accepted. (Default Setting). Ticket Recognition: Supports the Barcode Ticket Reject Codes. o When a barcode ticket is inserted in the down directions, it will be rejected with the error code 9B. Changed the Reject Code for doubled (stacked) tickets. (From error code 91 to 98). Machine Operation: UBA can now determine the size of the cashbox installed. This is related to reporting cashbox near full. (smaller cashbox near full at 425 bills. Larger cashbox near full at 825 bills). Machine Operation: Modified power recovery operation. If a polymer note is inserted and power is removed prior to escrow, there was a possibility that the note was not rejected due to the clear plastic window on the note. (No polymer notes in the USA; this is a change we are 2/5

3 adding to all UBA software). Machine Operation: Supports the UBA USB Tool Suite program. (Able to download and get performance data using the front USB port). Machine Operation: Power Up is reported when a banknote cannot be detected in the transport unit. (This occurs in the case of a power failure after receiving the STACK Command). Previous version , reported a Power up with Bill in Stacker. Interface: Stacker Open is now reported, even if a bill has just been rejected and is still at the entry. Interface: Modified software when reporting a reject code. A reject code is not reported if a banknote cannot be transported to the escrow position even after 3 retries. Interface: Modified the software so that a banknote is rejected when Polling cannot be received within 3 seconds after it is carried to the escrow position. (Escrow timeout of 3 seconds). Interface: If a banknote acceptance was disabled by the Enable / Disable command, IDLING status did not appear. Barcode ticket acceptance was also disabled if the barcode acceptance is set by command. ICB: Changed the timing for recording a barcode ticket number. ICB: If the Reset Command is received while writing onto the ICB, the Reset operation will be performed after the data has been completely written. ICB: The ICB will always be checked for (not only in power-up). ICB: Communication retry after wake-up, stop communicating for about 160ms after sending the EOT. (ICB UBA communication). ICB: Supports the ICB Enable/Disable Command. ICB feature can be enabled or disabled with the ID-003 command. (Version ) 06/2006 Banknote Recognition: Added counterfeit countermeasures against $100 Supernotes. Banknote Recognition: Added High Security $100 DIP switch selection. High Security mode allows better rejection of "Super Note" type counterfeits. (Selecting High Security may affect the $100 acceptance rate). Banknote Recognition: Improved recognition, all denominations. Machine Operation: DIP switch assignment change. $50 / $100 are now combined on DIP switch 6. DIP switch 7 is assigned to $100 normal / high security. Machine Operation: Software modified to reject WBA reference calibration paper. Machine Operation: USB Download may be initiated when status is Disabled or Enabled. Previous software allowed USB download only when status was Disabled. Machine Operation: Change the Pause timer from a few seconds to 10 seconds. There is a gross Pause timer of 20 seconds). Machine Operation: Added cleaning mode. UBA recognizes a custom cleaning card and enters a cleaning mode for a few moments. (Cleaning card is moved in and out of the path 3 times). Machine Operation: During a transaction, the UBA will close the centering mechanism to minimize a second note from being inserted. The centering mechanism is opened again when the original note is being pushed into the cashbox. (This change will make multiple note insertion smoother). Interface: Case where Host is polling faster than specified 100~200 ms and the Host decides to return a bill from escrow. (Return command). UBA status will change from Escrow [13] to Returning [18] more quickly to avoid a Host lock-up condition. (Specific customer problem). Interface: Added ICB Box Number Set command. Interface: Automatic retry feature can now be enabled / disabled using the Optional Function [C5] set command. (Option 3). Interface: When interrupt mode 2 is set and status changes from Accepting [12] to Escrow [13], send ENQ without waiting for a Status Request. Interface: Modified the method for checking the external ROM from CRC32 to CRC16. Memo: (Version ) 11/2005 Interface: New software development. This firmware may accept notes of series older than the years listed due to similarities in patterns although these notes are not officially supported by this firmware. 3/5

4 # Dip Switch OFF Ticket ENABLE 1 ON Ticket DISABLE OFF 1 ENABLE 2 ON 1 DISABLE OFF 5 ENABLE 3 ON 5 DISABLE OFF 10 ENABLE 4 ON 10 DISABLE OFF 20 ENABLE 5 ON 20 DISABLE OFF 50 ENABLE 6 ON 50 DISABLE OFF 100 ENABLE 7 ON 100 DISABLE OFF OFF 8 ON TEST MODE Dip Switch Settings ID-003 Data Setting Specification VERSION DATA SW. Version Boot Version U(USA)-24-SS ID003-03V JUN13 BE96 B11 ESCROW DATA CURRENCY ASSIGN DATA Code Denomination Code Country Denomination Exp. 61h 1 61h 01h 01h 00h 62h Reserved 62h 00h 00h 00h 63h 5 63h 01h 05h 00h 64h 10 64h 01h 0Ah 00h 65h 20 65h 01h 14h 00h 66h 50 66h 01h 32h 00h 67h h 01h 64h 00h 68h Reserved 68h 00h 00h 00h ENABLE/DISABLE DATA SECURITY DATA DATA bit Data 1 Data 2 DATA bit Data 1 Data Reserved 0 1 Reserved 1 Reserved Reserved 1 Reserved Reserved 2 5 Reserved 2 5 Reserved 3 10 Reserved 3 10 Reserved 4 20 Reserved 4 20 Reserved 5 50 Reserved 5 50 Reserved Reserved Reserved 7 Reserved Reserved 7 Reserved Reserved 0: Enable 1: Disable (Default: 8200h) 0: Normal 1: Security Level high (Default: 0000h) 4/5

5 DIRECTION DATA OPTIONAL FUNCTION DATA DATA bit Direction Sample demonination:100 DATA bit Data 1 Data 2 0 A Direction 0 Not used Not used 1 B Direction Power Recovery [02] Not used 2 C Direction A Front B 2 Auto-Retry Operation [04] Not used 3 D Direction (FA) (FB) 3 24char bar ticket accept [08] Not used 4 Not used Back 4 Not used Not used D C 5 Not used 100 (BB) (BA) 5 Nearly Full [20] Not used 6 Not used 6 Entrance Sensor Event [40] Not used 7 Not used 7 Encryption [80] Not used 0: Not Inhibit 1: Inhibit (Default: 00h) 0: Disable 1: Enable (Default: 0000h) BAR CODE FUNCTION DATA Code Function Data 1 01h Barcode type (interleaved 2 of 5) Data 2 12h Character length (18 char) 5/5