Data setting software MEXE02

Size: px
Start display at page:

Download "Data setting software MEXE02"

Transcription

1 HM Data setting software MEXE02 OPERATING MANUAL Before Use Thank you for purchasing an Oriental Motor product. This operating manual describes product handling procedures and safety precautions. Please read it thoroughly to ensure safe operation. Always keep the manual where it is readily available. Table of contents 1 Safety precautions Introduction Installation and uninstallation Required system configuration Before installing MEXE Installing the device driver Installing MEXE Uninstalling MEXE Connection, startup and shutdown Connection method Starting MEXE Setting up the communication line Shutting down Data edit Creating new data Opening an existing data file Setting data in the data edit window Saving a data file Restore default data Ending data edit Data upload/download and verification Download data to the applicable product (writing) Upload from the applicable product (reading) Verifying data Other functions Printing data Checking product information Checking version information...39

2 1 Safety precautions 1 Safety precautions The following describe the safety precautions so that this product is used in a safe manner. MEXE02 is designed with the assumption that the user has an understanding of basic operations such as starting up and exiting applications and how to use a mouse in Windows 2000, Windows XP or Windows Vista. Use the product only after carefully reading and fully understanding these instructions. Also read the Safety precautions section in the operating manual that came with the product you are combining with the MEXE02. Warning Caution Note Handling the product without observing the instructions that accompany a Warning symbol may result in serious injury or death. Handling the product without observing the instructions that accompany a Caution symbol may result in injury or property damage. The items under this heading contain important handling instructions that the user should observe to ensure safe use of the product. Warning Connection Turn off the power to both the PC and applicable product before connecting your PC to the applicable product. Failure to follow this instruction may cause electric shock. Caution Connection When grounding the positive terminal of the power supply, do not connect any equipment (PC, etc.) whose negative terminal is grounded. Doing so may cause the applicable product and PC to short, damaging both. Use the data setter OPX-2A to set data, etc. Disposal To dispose of the MEXE02, disassemble it into parts and components as much as possible and dispose of individual parts/components as industrial waste. -2-

3 2 Introduction 2 Introduction Please perform any installation, uninstallation, editing, and other operations for data setting software MEXE02 using an account with Administrator privileges. Structure of the manual The MEXE02 comes with the manuals specified below. OPERATING MANUAL Before Use (this document) This manual explains the installation and uninstallation of MEXE02 as well as how to edit MEXE02 data, among others. OPERATING MANUAL for each applicable product The screen transitions and setting items are explained, among others, for each product used in combination with the MEXE02. Notation rules The description of text in this manual follows the notation rules specified as shown at the right. The screens shown in this manual are those displayed in Windows XP. [ ] Enter Menus and submenus shown in/from the title bar, buttons, and other controls that can be clicked with the mouse, are enclosed in square brackets. Dialog box messages, etc., are enclosed in double quotations marks. Keyboard keys are shown in a box. Note The screens provided in this operating manual are those displayed in an AR series AC power supply input type. The setting items and screen transitions vary depending on the product used in combination with the MEXE02. Functions of MEXE02 MEXE02 is a software program that lets you set data required for motor operation from a PC. Data can be edited in various PC screens, or data set in an applicable product can be checked from a PC. The key functions of MEXE02 are explained below. Editing and saving the data Operating data and parameters can be created and edited. Data edited in MEXE02 can be written to an applicable product (download), or data stored in an applicable product can be read into MEXE02 (upload). You can save data files created in MEXE02 in either MEXE02 s dedicated file format or CSV format. Monitor function ON/OFF statuses of I/O signals can be monitored. The waveform measurement feature lets you check I/O signals, motor speeds and other settings based on measured waveforms. Test function I/O test can be performed to monitor input signals and cause output signals to be output forcibly. You can also perform test operations in MEXE

4 2 Introduction Applicable product Refer to Information (HM-40107) for the products that can be used in combination with the MEXE02. These products are referred to as an applicable product in this document. Hazardous substances RoHS (Directive 2002/95/EC 27Jan.2003) compliant Packing list Data setting software MEXE02 (CD-ROM)... 1 pc. PC interface cable [5 m (16.4 ft.)]... 1 pc. USB cable [0.5 m (1.6 ft.)]... 1 pc. OPERATING MANUAL (CD-ROM)... 1 pc. Information... 1 copy General specifications of cable Interface USB Specification 1.1 (Full Speed 12 Mbps) Connector shapes Communication system Communication speed Indicator Power supply Current consumption Dimension Mass Operating environment Insulation system RS-485 (Mini DIN 8 Pin: male), USB (Type Mini B: female) USB Type A connection via included USB cable to connect to a PC Half duplex 9600 bps The LED is lit (green) when recognized by PC and ready to use. 5.0 VDC (bus power) 25 ma (100 ma max.) mm ( in.) [excluding cable section] PC interface cable: App. 0.2 kg (7.1 oz) USB cable: App kg (1.06 oz) Ambient temperature: 0 to +40 C (+32 to +104 F) (non-freezing) Ambient humidity: 85% or less (non-condensing) Atmosphere: No corrosive gas, dust, water or oil Non-isolated -4-

5 2 Introduction General flow Steps to set operating data and parameters using MEXE02 are shown below. Install device driver. (page 7) Install MEXE02. (page 13) Connect your PC to an applicable product. (page 21) Start MEXE02. (page 23) Perform data communication between the PC and applicable product. (page 23) Edit data. (page 25) Download data files (page 33) Shut down MEXE02. (page 24) You can also connect the PC and applicable product after editing data. In this case, after saving the edited data to the PC, turn off both the PC power and applicable product power, connect the PC and applicable product, and then start them again. Note It is recommended to back up the application program to a suitable storage device or a medium since data loss is a possibility when using software. -5-

6 3 Installation and uninstallation 3 Installation and uninstallation 3.1 Required system configuration The installation of MEXE02 on a PC requires one of the following operating systems (OS) and a PC compatible with the OS you ll be using. Operating system You need an English version of any of the basic operating systems listed below. Microsoft Windows 2000 Professional Service Pack 4 Microsoft Windows XP Home Edition Service Pack 2 Microsoft Windows XP Professional Service Pack 2 Microsoft Windows Vista Home Basic Service Pack 1 Microsoft Windows Vista Home Premium Service Pack 1 Microsoft Windows Vista Business Service Pack 1 Microsoft Windows Vista Ultimate Service Pack 1 MEXE02 is not available for 64-bit (x64, IA64) Windows XP and Windows Vista. Personal computer CPU Display resolution Memory Hard disk capacity USB port Disk drive Intel PentiumⅢ 800 MHz or more (Your operating system must support the CPU.) Video adapter or monitor of XGA ( ) or higher resolution Windows 2000 Professional: 448 MB or more is recommended. Windows XP Home Edition, Professional: 512 MB or more is recommended. Windows Vista Home Basic: 896 MB or more is recommended. Windows Vista Home Premium, Business, Ultimate: 1.4 GB or more is recommended. Available disk space of 30 MB or more 1 port or more CD-ROM drive (for installation) 1 The hardware requirements for the OS must be satisfied. 2 For MEXE02 to function, Microsoft.NET Framework 2.0 Service Pack 1 must be installed in your PC. Microsoft.NET Framework 2.0 Service Pack 1 will be installed automatically, if not already installed. Accordingly, a free hard disk space of up to 500 MB is required in addition to the hard disk capacity specified above. Note The required memory and hard disk capacities may be different, depending on the system environment. -6-

7 3 Installation and uninstallation 3.2 Before installing MEXE02 Terms for use of this software Read the terms specified below. Install MEXE02 only if you agree with all of these terms. 1. All copyrights to or in MEXE02 belong to Oriental Motor Co., Ltd. 2. Unauthorized use or reproduction of MEXE02 and its operating manual, whether in part or in whole, is prohibited. 3. Oriental Motor is not liable for any incidental or indirect loss (data damage, business disruption, loss of business profit, etc.) arising from the use of or inability to use MEXE02. Note Administrator privilege is required for installation. If MEXE02 is already installed If MEXE02 is already installed, be sure to uninstall it by referring on p.19, and then install MEXE02 again. Note If an overwrite installation is performed, MEXE02 may not operate properly. 3.3 Installing the device driver Note Administrator privilege is required for installation. Do not connect the included USB cable to the PC when installing device drivers. Always install the device driver prior to installing MEXE Insert the MEXE02 CD-ROM into your CD-ROM drive. 2. Open the DRIVER folder on the CD-ROM. 3. Open the CC05IF-USB folder. -7-

8 3 Installation and uninstallation 4. Double-click Setup.exe. The installer will start up. The following screen may be displayed in Windows Vista. Click [Continue] to proceed. 5. Click [Install]. -8-

9 3 Installation and uninstallation 6. The following screen may be displayed in some cases. Click [Continue Anyway] to proceed. The following screen may be displayed in Windows Vista. Click [Install this driver software anyway] to proceed. 7. Click [OK]. -9-

10 3 Installation and uninstallation 8. Plug the USB cable into the USB port on the PC. If the following screen is displayed, select No, not this time and click [Next]. In Windows Vista, it will proceed to Step 11 automatically. 9. Click [Next]. -10-

11 3 Installation and uninstallation The following screen will be displayed if No, not this time was selected in Step 8. Setup starts installing the device driver. -11-

12 3 Installation and uninstallation 10. The following screen may be displayed in some cases. Click [Continue Anyway] to proceed. 11. When the installation is complete, click [Finish]. The device driver has been successfully installed. -12-

13 3 Installation and uninstallation 3.4 Installing MEXE02 Note Administrator privilege is required for installation. Microsoft.NET Framework 1.1 Service Pack 1 must be installed in order to use MEXE02. Microsoft.NET Framework 1.1 Service Pack 1 will be automatically installed, but the system must be restarted after installation. Please be sure to close all other applications. The system must be restarted after installing the MEXE02. Please be sure to close all other applications. 1. Insert the MEXE02 CD-ROM into your CD-ROM drive. A window pops up automatically, showing the folders on the CD-ROM. 2. Open the MEXE02ENG folder on the CD-ROM. 3. Double-click setup.exe to launch the setup program. -13-

14 3 Installation and uninstallation If Microsoft.NET Framework 2.0 Service Pack 1 is already installed, it will proceed to Step 5. The following screen may be displayed in Windows Vista. Click [Allow] to proceed. 4. Click [Install]. -14-

15 3 Installation and uninstallation Microsoft.NET Framework 2.0 Service Pack 1 will be installed. 5. Click [Next]. -15-

16 3 Installation and uninstallation 6. Read the terms of the agreement shown on the screen. If you agree with the terms, select I accept the terms in the license agreement, and then click [Next]. 7. Enter the user name and organization, and click [Next]. -16-

17 3 Installation and uninstallation 8. Select Complete under Setup Type, and click [Next]. 9. Click [Install]. -17-

18 3 Installation and uninstallation Setup starts installing MEXE When the installation is complete, click [Finish]. MEXE02 has been successfully installed. 11. In case you are prompted to restart your system, click [Yes]. The system will restart. -18-

19 3 Installation and uninstallation 3.5 Uninstalling MEXE02 Please follow the procedures below in order to uninstall MEXE02. Note Administrator privilege is required for uninstallation. 1. Disconnect the USB cable from the USB port on the PC. 2. Click [Start] in the task bar, point to [Settings], and then click [Control Panel]. 3. In Control Panel, click Add or Remove Programs. 4. In the list under Currently installed programs, select MEXE02, and then click [Remove]. 5. Click [Yes]. -19-

20 3 Installation and uninstallation The following screen may be displayed in Windows Vista. Click [Allow] to proceed. MEXE02 is uninstalled. When the uninstallation is complete, MEXE02 is removed from the list. -20-

21 4 Connection, startup and shutdown 4 Connection, startup and shutdown This chapter explains how to connect your PC to an applicable product and start/shut down MEXE02. Note Administrator privilege is required to use MEXE Connection method Caution When grounding the positive terminal of the power supply, do not connect any equipment (PC, etc.) whose negative terminal is grounded. Doing so may cause the applicable product and PC to short, damaging both. Note Connect your PC to an applicable product using the PC interface cable and USB cable supplied with MEXE02. Connecting to an applicable product (excluding a network converter) 1. Turn off the PC and applicable product. 2. Connect motor to applicable product. 3. Plug the PC interface cable into the communication connector on the applicable product. Plug the USB cable into the USB port on the PC. 4. Connect the PC interface cable and USB cable. Personal computer Applicable product USB cable PC interface cable Communication connector The position of the communication connector varies depending on the applicable product. 5. Turn on the power to the PC and applicable product, and start the PC. -21-

22 4 Connection, startup and shutdown Connecting to an Oriental Motor network converter 1. Turn off the PC and network converter. 2. Connect the product supporting RS-485 communication to the network converter. 3. Plug the PC interface cable into the communication connector on the network converter. Plug the USB cable into the USB port on the PC. 4. Connect the PC interface cable and USB cable. Personal computer USB cable PC interface cable Communication connector Product supporting RS-485 communication Oriental Motor Network converter 5. Turn on the power to the PC, the network converter and the product supporting RS-485 communication, and then start the PC. -22-

23 4 Connection, startup and shutdown 4.2 Starting MEXE02 Double-click the MEXE02 icon on the desktop to start MEXE02. Once MEXE02 has started, the following window appears. Menu bar Toolbar Status bar 4.3 Setting up the communication line If you have connected the PC and an applicable product for the first time, set up the communication line. 1. Click [Option] from the [Communication] menu. 2. Select the communication port to which the USB cable is connected, and click [OK]. If communication cannot be established even through the applicable product power is input and the correct communication port is selected, select this check box and then set up the communication line again. -23-

24 4 Connection, startup and shutdown Confirming the communication port number 1. Right-click the My Computer icon on the Desktop and click Properties. The system properties will be displayed. 2. Click the Hardware tab and then click [Device Manager]. 3. Double-click Port (COM & LPT). Confirm the port number labeled as ORIENTAL MOTOR/Virtual COM Port. In the example below, it is COM Shutting down Click [Exit] from the [File] menu. MEXE02 shuts down. -24-

25 5 Data edit 5 Data edit This chapter explains how to create data files, edit operating data and parameters, and store edited data. Data can be created from scratch or by editing existing data. Both require different procedures, so read the section corresponding to each method. The screens provided in the explanation below are those displayed in an AR series AC power supply input type. Note Administrator privilege is required to use MEXE Creating new data 1. Click the New icon in the toolbar. 2. Select the product series and product name, and click [OK]. -25-

26 5 Data edit The data edit window appears. Example: Operating current parameter window of an AR series AC power supply input type 5.2 Opening an existing data file 1. Click the Open icon in the toolbar. 2. Select the file you want to edit, and click [Open]. The data edit window appears, just like when you are creating a new data file. -26-

27 5 Data edit 5.3 Setting data in the data edit window Note Changing the data in MEXE02 will not change the data in the applicable product. In order to change the data in the applicable product, a download must be performed. See p.33 for procedures on downloading. Data entry When the value in a cell is changed, the cell changes to yellow. The characters in the cell will be black if the value in the cell is different from the default value. Resetting the cell back to the default value changes the text color to blue. Entering a numeric value Click a desired cell, enter a numeric value using the keyboard, and then press the Enter key. Selecting a value from a pull-down menu Double-clicking a desired cell displays a pull-down menu. Select a desired value from the pull-down menu. Copying and pasting data You can copy an entered value and paste it into a different cell. Copying and pasting lets you quickly populate multiple cells with the same value. 1. Select the data you want to copy, and then click the Copy icon in the toolbar. You can select a single value or multiple values. Data to be copied 2. Click the cell you want to paste the data into, and then click the Paste icon in the toolbar. Cell to be pasted -27-

28 5 Data edit 5.4 Saving a data file The data edited within MEXE02 or data read by the applicable product will be saved as a file. Data files can be saved in MEXE02 s dedicated file format (.mx2) or CSV format (.csv). Saving data by overwriting Click the Save icon in the toolbar. The current data is saved over the existing data. Saving data under a different name 1. Click [Save As] from the [File] menu. 2. Enter a new file name, and click [Save]. The data is saved under the specified name. -28-

29 5 Data edit Saving data in CSV format Data saved in the CSV format can be edited in applications other than MEXE02. Note that once saved in the CSV format, files can no longer be opened or edited in MEXE02. To edit a CSV file in MEXE02, open the file in an application other than MEXE02 and then paste the data to MEXE Click [Export] from the [File] menu. 2. Enter a file name, and click [Save]. All operating data and parameters are saved in CSV format. -29-

30 5 Data edit 5.5 Restore default data Restoring edited data You can initialize the data you have edited in the data edit window. 1. Click [Initialize] from the [Edit] menu. 2. Select the data you want to initialize, and click [OK]. 3. Click [Yes]. The data is initialized. -30-

31 5 Data edit Restoring default data in selected cells 1. In the data edit window, select the cell you want to restore. Cell to be initialized 2. Click the right mouse button, and click [Initialize]. The value in the selected cell returns to the default. Restoring the applicable product to default settings You can restore data stored in an applicable product s NV memory. Note The applicable product s NV memory can be rewritten approx. 100,000 times. Do not turn off the applicable product power while the initialization is still in progress. Doing so may damage the data. 1. Click [Initialize] from the [Communication] menu. 2. Select the data you want to restore, and then click [OK]. -31-

32 5 Data edit 3. Click [Yes]. The specified data in the applicable product s NV memory is restored. 4. When the restore is complete, click [OK]. Note If the system parameters have been changed by data initialization, the following message will be displayed. Changes to the system parameters will become effective at next power-up. Please turn off the power and turn it on again. If a 24 VDC power supply is used, also cycle the 24 VDC power supply. 5.6 Ending data edit To close the data edit window, click [Close] from the [File] menu. -32-

33 6 Data upload/download and verification 6 Data upload/download and verification This chapter explains how to write MEXE02 data to an applicable product (download), read data from an applicable product into MEXE02 (upload), and verify MEXE02 data against applicable product data. The screens provided in the explanation below are those displayed in an AR series AC power supply input type. Note Administrator privilege is required to use MEXE Download data to the applicable product (writing) You can write data created in MEXE02 to an applicable product. Note The applicable product s NV memory can be rewritten approx. 100,000 times. Do not turn off the applicable product power while the download is still in progress. Doing so may damage the data. 1. Click the Download icon in the toolbar. 2. Select the data to be downloaded, and then click [OK]. Note The MEXE02 data and the applicable product data must be synchronized prior to performing a Modified Data Only download. For the synchronization method, refer to the MEXE02 operating manual for each applicable product you are combining with the MEXE Click [Yes]. The data is downloaded. -33-

34 6 Data upload/download and verification 4. After the data has been downloaded, click [OK]. Note If the system parameters have been changed by data downloading, the following message will be displayed. Changes to the system parameters will become effective at next power-up. Please turn off the power and turn it on again. If a 24 VDC power supply is used, also cycle the 24 VDC power supply. 6.2 Upload from the applicable product (reading) You can read data stored in an applicable product into MEXE Click the Upload icon in the toolbar. 2. Click [OK]. The data is uploaded. 3. After the data has been uploaded, click [OK]. The data that has been read is displayed. -34-

35 6 Data upload/download and verification 6.3 Verifying data You can verify the data stored in an applicable product against the data displayed in MEXE Click [Verify] from the [Communication] menu. 2. Select the data to be verified, and then click [OK]. Data is verified. -35-

36 6 Data upload/download and verification 3. When the verification is complete, click [Close]. When both data match: When the data do not match: An unmatched data is displayed. -36-

37 7 Other functions 7 Other functions You can print MEXE02 data or check the version of MEXE02. The screens provided in the explanation below are those displayed in an AR series AC power supply input type. Note Administrator privilege is required to use MEXE Printing data You can print data and waveform measurement results. 1. Click [Print] from the [File] menu. 2. Set the items you want to print, print object, and color, and then click [OK]. -37-

38 7 Other functions 7.2 Checking product information 1. Click [Device Information] from the [Tool] menu. 2. Click [Check]. Verification of connection status will start. 3. Once the results are displayed, click [Close]. When the applicable product series name or part name is not displayed Please verify the following items: Is the applicable product power on? Is the PC interface cable completely inserted? Is the applicable product a type that is compatible with the MEXE02? When Unsupported Product is shown in the product name column. Please verify that the applicable product supports the MEXE

39 7 Other functions 7.3 Checking version information You can check the version of MEXE02 software you are using. 1. Click [About MEXE02] from the [Help] menu. 2. After you have checked the software version, click [Close]. The software version is also found on the MEXE02 CD-ROM. -39-

40 Unauthorized reproduction or copying of all or part of this manual is prohibited. If a new copy is required to replace an original manual that has been damaged or lost, please contact your nearest Oriental Motor branch or sales office. Oriental Motor shall not be liable whatsoever for any problems relating to industrial property rights arising from use of any information, circuit, equipment or device provided or referenced in this manual. Characteristics, specifications and dimensions are subject to change without notice. While we make every effort to offer accurate information in the manual, we welcome your input. Should you find unclear descriptions, errors or omissions, please contact the nearest office. is a registered trademark or trademark of Oriental Motor Co., Ltd., in Japan and other countries. Other product names and company names mentioned in this manual may be registered trademarks or trademarks of their respective companies and are hereby acknowledged. The third-party products mentioned in this manual are recommended products, and references to their names shall not be construed as any form of performance guarantee. Oriental Motor is not liable whatsoever for the performance of these third-party products. Copyright ORIENTAL MOTOR CO., LTD Please contact your nearest Oriental Motor office for further information. Technical Support Tel:(800) :30 A.M. to 5:00 P.M., P.S.T. (M-F) 7:30 A.M. to 5:00 P.M., C.S.T. (M-F) techsupport@orientalmotor.com Headquarters and Düsseldorf Office Tel: Fax: Munich Office Tel: Fax: Hamburg Office Tel: Fax: Tel: Fax: Tel:(02) Tel:(6745)7344 Tel:(03) Tel: KOREA Tel:(032) ~3 Fax:(02) Fax:(6745)9405 Fax:(03) Fax: Fax:(032) Headquarters Tokyo, Japan Tel:(03) Fax:(03) Tel: Fax: Tel: Fax: Printed on Recycled Paper

Data editing software EZED3

Data editing software EZED3 HL-17149 Data editing software EZED3 OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures and safety precautions. Please read

More information

MEXE02. Support software OPERATING MANUAL

MEXE02. Support software OPERATING MANUAL HM-60131-5 Support software MEXE02 OPERATING MANUAL This manual describes the MEXE02 Ver. 3.10 and later. The screens and operation procedures in the MEXE02 Ver. 3.10 and later differ from those in versions

More information

Data setting software MEXE02 DGⅡSeries / EAS Series

Data setting software MEXE02 DGⅡSeries / EAS Series HL-14056 Data setting software MEXE02 DGⅡSeries / EAS Series OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This operating manual describes product handling procedures and safety

More information

DriveWizard Plus Instruction Manual

DriveWizard Plus Instruction Manual DriveWizard Plus Instruction Manual To properly use the product, read this manual thoroughly. MANUAL NO. TOEP C730600 20C Table of Contents Safety Symbols and Markings...4 Manual Overview...5 Related Manuals...5

More information

MISUMI SUPPORT SOFTWARE. RS-Manager. User s Manual C1 / C21 / C22 / P1 EXWM KE114. Ver. 2.00

MISUMI SUPPORT SOFTWARE. RS-Manager. User s Manual C1 / C21 / C22 / P1 EXWM KE114. Ver. 2.00 MISUMI SUPPORT SOFTWARE RS-Manager User s Manual C1 / C21 / C22 / P1 Ver. 2.00 EXWM14200 KE114 CONTENTS RS-Manager User s Manual Before getting started 1 1. About RS-Manager 2 2. Installing and uninstalling

More information

GP-N100 Utility Software Manual

GP-N100 Utility Software Manual System Requirements En Thank you for your purchase of a GP-N100. This manual describes how to use the GP-N100 Utility to download the latest assisted GPS data from Nikon servers to your GP-N100. To ensure

More information

RICOH Driver Installation Guide

RICOH Driver Installation Guide RICOH Driver Installation Guide This document provides explanation on installation method of RICOH driver required to use RICOH Pro L4130/L4160 inkjet printer. RICOH driver is required to connect with

More information

FX-USB-AW/FX3U-USB-BD. USER'S MANUAL USB Driver Installation Edition

FX-USB-AW/FX3U-USB-BD. USER'S MANUAL USB Driver Installation Edition FX-USB-AW/FX3U-USB-BD USER'S MANUAL Safety Precautions (Read these precautions before use.) BEFORE installation, operation, maintenance or inspection of this product, thoroughly read through and understand

More information

TOSHIBA Label Printer. BCP Setting Tool Operation Manual

TOSHIBA Label Printer. BCP Setting Tool Operation Manual TOSHIBA Label Printer BCP Setting Tool Operation Manual 3rdEdition: February 23, 2017 TABLE OF CONTENTS 1. INTRODUCTION 3 SUPPORTED PRINTERS... 3 SOFTWARE LICENSE AGREEMENT... 3 FEATURES... 4 OUTLINE OF

More information

Engineering Tool for PC SDWP001 Operating Manual

Engineering Tool for PC SDWP001 Operating Manual Inverter HF-520/HF-X20 Series SF-520 Series Engineering Tool for PC SDWP001 Operating Manual 1 Manual No. DM2308E-1 Table of Contents Safety Symbols and Markings...4 Safety Notes and Instructions...4 Manual

More information

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 2013 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written

More information

PS-4700/4800Series User ユーザーマニュアル Hardware Manual Manual

PS-4700/4800Series User ユーザーマニュアル Hardware Manual Manual PS-4700/4800Series シリーズ User ユーザーマニュアル GP-4000 Pro-face Manual Series Remote HMI Server Hardware Manual Manual (Atom N270/Core 2 Duo 2 Duo P8400 P8400 Pre-installed 搭載モデル Model) ) Preface Thank you for

More information

User s Manual. Touch Panel Driver. Important

User s Manual. Touch Panel Driver. Important User s Manual Touch Panel Driver Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document is

More information

TOSHIBA Bar Code Printer. Network Tool Operation Manual

TOSHIBA Bar Code Printer. Network Tool Operation Manual TOSHIBA Bar Code Printer Network Tool Operation Manual Fifth Edition: February 3, 2009 Table of Contents TABLE OF CONTENTS 3 INTRODUCTION 1 SUPPORTED PRINTERS... 1 SOFTWARE LICENSE AGREEMENT... 1 FEATURES...

More information

SEIKA. Trans Braille 40 Braille Display. User s Manual

SEIKA. Trans Braille 40 Braille Display. User s Manual SEIKA Trans Braille 40 Braille Display User s Manual Preface Thank you very much for purchasing a Trans Braille 40, Seika Braille Display. This Braille display enables pins to display characters as they

More information

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 2013 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written

More information

Daily Monthly Report Software EcoMeasure III. User manual (Detailed version) Model MES3-SW1-DR-EN

Daily Monthly Report Software EcoMeasure III. User manual (Detailed version) Model MES3-SW1-DR-EN Daily Monthly Report Software EcoMeasure III Model User manual (Detailed version) Make sure to read this user manual before using the product. Please ensure that this manual is delivered to the end user

More information

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM CONTENTS ABOUT THE SOFTWARE BEFORE INSTALLATION INSTALLING THE SOFTWARE CONNECTING TO A COMPUTER CONFIGURING THE PRINTER DRIVER TROUBLESHOOTING Page

More information

SEIKA. Trans Braille 40 Braille Display. User s Manual Version 3.36

SEIKA. Trans Braille 40 Braille Display. User s Manual Version 3.36 SEIKA Trans Braille 40 Braille Display User s Manual Version 3.36 Preface Thank you very much for purchasing a Trans Braille 40, Seika Braille Display. This Braille display enables pins to display characters

More information

GV-Joystick. User's Manual

GV-Joystick. User's Manual GV-Joystick User's Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. JKV10-C 2012 GeoVision, Inc. All rights reserved.

More information

fi-5950 Image Scanner

fi-5950 Image Scanner P3PC-3062-04EN fi-5950 Image Scanner Getting Started Thank you for purchasing the fi-5950 Duplex Color Scanner. This document describes how to use fi-5950 and basic operation methods. Before you start

More information

Daily Monthly ReportSoftware EcoMeasureIII MODEL MES3-SW1-DR-FR (English Version) User s manual (Detailed version)

Daily Monthly ReportSoftware EcoMeasureIII MODEL MES3-SW1-DR-FR (English Version) User s manual (Detailed version) Daily Monthly ReportSoftware EcoMeasureIII MODEL MES3-SW1-DR-FR (English Version) User s manual (Detailed version) Before operating the instrument, you should first read thoroughly this operation manual

More information

Indicates a caution you must observe when operating the product. Shows the number of the page that has related contents.

Indicates a caution you must observe when operating the product. Shows the number of the page that has related contents. Installation Guide This manual contains detailed instructions and notes on the operation and use of this product. For your safety and benefit, read this manual carefully before using the product. Notice

More information

STD_HLS36USB_V1.0E. HLS(MKY36)USB Unit. HLS-36USB Product Manual

STD_HLS36USB_V1.0E. HLS(MKY36)USB Unit. HLS-36USB Product Manual STD_HLS36USB_V1.0E HLS(MKY36)USB Unit HLS-36USB Product Manual Introduction Thank you for purchasing the StepTechnica product. Please check the bundled items. This product consists of the following contents.

More information

TRP-C08S. USB To 1* RS232 and 1*RS422/485 Isolated Converter. User s Manual. Printed Jun Rev 1.2

TRP-C08S. USB To 1* RS232 and 1*RS422/485 Isolated Converter. User s Manual. Printed Jun Rev 1.2 TRP-C08S USB To 1* RS232 and 1*RS422/485 Isolated Converter User s Manual Printed Jun. 2007 Rev 1.2 Trycom Technology Co., Ltd 1F, No.2-11, Sihu street, Yingge Township, Taipei, Taiwan ROC Tel: 886-2-86781191,

More information

User s Guide. Controller. Be sure to keep all user documentation handy for future reference.

User s Guide. Controller. Be sure to keep all user documentation handy for future reference. E User s Guide Controller Be sure to keep all user documentation handy for future reference. Read this first! The contents of this User s Guide are subject to change without notice. Copying of this manual,

More information

FRENIC Loader 3.3. Instruction Manual. Inverter Support Software. (FRENIC-Mini /Eco/Multi/Ace/MEGA/HF)

FRENIC Loader 3.3. Instruction Manual. Inverter Support Software. (FRENIC-Mini /Eco/Multi/Ace/MEGA/HF) Inverter Support Software FRENIC Loader 3.3 (FRENIC-Mini /Eco/Multi/Ace/MEGA/HF) Instruction Manual INR-SI47-1549d-E Copyright 2008-2014 Fuji Electric Co., Ltd. No part of this publication may be reproduced

More information

Utility Software Data Connection For 22S Instruction Manual

Utility Software Data Connection For 22S Instruction Manual (E-Rev1) Utility Software Data Connection For 22S Instruction Manual Please read this instruction manual carefully before installation. LICENSE AGREEMENT READ THE TERMS OF THIS AGREEMENT CAREFULLY. Fujikura

More information

Install Manual. P2 Software ENGLISH M0509AT5091 -FJ VQT2G26-4

Install Manual. P2 Software ENGLISH M0509AT5091 -FJ VQT2G26-4 Install Manual P2 Software M0509AT5091 -FJ ENGLISH VQT2G26-4 Contents Operating Precautions When Using Windows 1. Before Installing................................................... 3 2. Precautions in

More information

3700 SERIES USER MANUAL

3700 SERIES USER MANUAL SAFETY GUIDE This manual contains the precautions necessary to ensure your personal safety as well as for protection for the products and the connected equipment. These precautions are highlighted with

More information

Handheld LPC Data Retrieval Software for Windows. Operation Manual

Handheld LPC Data Retrieval Software for Windows. Operation Manual Handheld LPC Data Retrieval Software for Windows MODEL S388-70 Operation Manual Read this manual carefully and understand the warnings described in this manual before operating the product. Keep this manual

More information

fi-5950 Image Scanner

fi-5950 Image Scanner P3PC-3062-06EN fi-5950 Image Scanner Getting Started Thank you for purchasing the fi-5950 Duplex Color Scanner. This document describes how to use fi-5950 and basic operation methods. Before you start

More information

FRENIC Visual Customizer

FRENIC Visual Customizer Instruction Manual Inverter Support Software FRENIC Visual Customizer for FRENIC-Ace series Thank you for purchasing our high-performance, multipurpose FRENIC-Ace Series inverter. This manual provides

More information

PS-9000 User s Manual UK English

PS-9000 User s Manual UK English PS-9000 User s Manual UK English Introduction Thank you for purchasing PS-9000 print server. This manual provides complete information on how to set up and use PS-9000 safely. Please read this manual carefully

More information

RICOH Driver Installation Guide

RICOH Driver Installation Guide RICOH Driver Installation Guide This document provides explanation on installation method of RICOH driver required to use RICOH Pro L4130/L4160 inkjet printer. RICOH driver is required to connect with

More information

P3PC ENZ0. Troubleshooting. (installation)

P3PC ENZ0. Troubleshooting. (installation) P3PC-4222-04ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap ix500 (hereinafter referred to as "the ScanSnap"). This manual provides information

More information

INTRODUCTION 2 FEATURES. 2 SPECIFICATIONS. 2 PIN ASSIGNMENT 2 DB-9 DB-25 CONVERSION TABLE. 2 DRIVER INSTALLATION QUICK GUIDE.. 2

INTRODUCTION 2 FEATURES. 2 SPECIFICATIONS. 2 PIN ASSIGNMENT 2 DB-9 DB-25 CONVERSION TABLE. 2 DRIVER INSTALLATION QUICK GUIDE.. 2 USB to RS-232 Converter Part Number: USB-232-1 Communications made easy CONTENTS INTRODUCTION 2 FEATURES. 2 SPECIFICATIONS. 2 PIN ASSIGNMENT 2 DB-9 DB-25 CONVERSION TABLE. 2 DRIVER INSTALLATION QUICK GUIDE..

More information

fi-6110 Image Scanner

fi-6110 Image Scanner P3PC-3002-06EN fi-6110 Image Scanner Getting Started Thank you for purchasing fi-6110 Color Image Scanner (hereinafter referred to as "the scanner"). This manual describes the preparation required for

More information

QL-500 QL-560 QL-570 QL-650TD QL-1050

QL-500 QL-560 QL-570 QL-650TD QL-1050 QL-500 QL-560 QL-570 QL-650TD QL-1050 Software installation guide English LB9153001 A Introduction Features P-touch Editor Printer Driver P-touch Address Book (Windows Only) Makes it easy for anyone to

More information

Utility Software Data Connection For 62S Instruction Manual

Utility Software Data Connection For 62S Instruction Manual (E-Rev1) Utility Software Data Connection For 62S Instruction Manual Please read this instruction manual carefully before installation. LICENSE AGREEMENT READ THE TERMS OF THIS AGREEMENT CAREFULLY. Fujikura

More information

Application software CA700 Application

Application software CA700 Application User s Manual Application software CA700 Application User s Manual 4th Edition This user s manual explains the handling precautions, features, and operating procedures of the CA700 Application. To ensure

More information

TRP-C08S. USB to 1 RS232 and 1 RS422/485 Isolated Converter. User s Manual

TRP-C08S. USB to 1 RS232 and 1 RS422/485 Isolated Converter. User s Manual TRP-C08S USB to 1 RS232 and 1 RS422/485 Isolated Converter User s Manual Printed Sep. 2014 Rev 1.4 Trycom Technology Co.,Ltd No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan. Tel : 886-3-350-3351

More information

USB port Hub with Ethernet Adapter. User s Manual

USB port Hub with Ethernet Adapter. User s Manual USB 2.0 3-port Hub with Ethernet Adapter User s Manual USB 2.0 3 Port Hub with Ethernet Adapter ABOUT THIS MANUAL This manual is designed for use with the USB 2.0 3 Port Hub with Ethernet Adapter. Information

More information

USB 2.0 Multi-Plus Card Reader/Writer. User s Manual

USB 2.0 Multi-Plus Card Reader/Writer. User s Manual USB 2.0 Multi-Plus Card Reader/Writer User s Manual Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or

More information

GXLink MultiChannel Wave Inserter Model SP-631

GXLink MultiChannel Wave Inserter Model SP-631 800173-0A Digital High Speed GXLink MultiChannel Wave Inserter Model SP-631 User Manual Copyright 2009 It is prohibited to copy, reproduce or distribute this information in whole or in part without the

More information

FUSION F2. User s Guide. Portable 2-Drive RAID SATA Storage System. For Windows

FUSION F2. User s Guide. Portable 2-Drive RAID SATA Storage System. For Windows FUSION F2 Portable 2-Drive RAID SATA Storage System User s Guide For Windows Fusion F2 Specifications and Features Drive Power/Activity LED Drive Power/Activity LED Figure 1 esata Connector Figure 2 Power

More information

SEIKA. Braille Display. User s Manual V3 Pro Version 1.0

SEIKA. Braille Display. User s Manual V3 Pro Version 1.0 SEIKA Braille Display User s Manual V3 Pro Version 1.0 Preface Thank you very much for purchasing Seika3 Pro Braille Display. The Seika refreshable Braille display provides a tactile interface to your

More information

fi-7180/ fi-7160/ fi-7260/ fi-7280 Getting Started Image Scanner Checking the Components P3PC EN

fi-7180/ fi-7160/ fi-7260/ fi-7280 Getting Started Image Scanner Checking the Components P3PC EN P3PC-4252-07EN fi-7160/ fi-7260/ fi-7180/ fi-7280 Getting Started Image Scanner Thank you for purchasing our image scanner. This manual describes the preparation required to use this product. Follow the

More information

PC-HELPER. PCI Bus Expansion Adapter for CardBus PC-Slot EAD(CB)SF. User s Manual CONTEC CO.,LTD.

PC-HELPER. PCI Bus Expansion Adapter for CardBus PC-Slot EAD(CB)SF. User s Manual CONTEC CO.,LTD. PC-HELPER PCI Bus Expansion Adapter for CardBus PC-Slot EAD(CB)SF User s Manual CONTEC CO.,LTD. Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed

More information

A/V over Gigabit Ethernet Adapter. User s Manual

A/V over Gigabit Ethernet Adapter. User s Manual A/V over Gigabit Ethernet Adapter User s Manual A/V over Gigabit Ethernet Adapter User s Manual ABOUT THIS MANUAL This manual is designed for use with the A/V over Gigabit Ethernet Adapter. Information

More information

User s Manual. Touch Panel Setting Tool. Important

User s Manual. Touch Panel Setting Tool. Important User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document

More information

HDMI A/V over Gigabit Ethernet Adapter. User s Manual

HDMI A/V over Gigabit Ethernet Adapter. User s Manual HDMI A/V over Gigabit Ethernet Adapter User s Manual HDMI A/V over Gigabit Ethernet Adapter User s Manual ABOUT THIS MANUAL This manual is designed for use with the HDMI A/V over Gigabit Ethernet Adapter.

More information

Reinstalling the Operating System on the Dell PowerVault 745N

Reinstalling the Operating System on the Dell PowerVault 745N Reinstalling the Operating System on the Dell PowerVault 745N This document details the following steps to reinstall the operating system on a PowerVault 745N system: 1. Install the Reinstallation Console

More information

Setup Guide. Operating Instructions. 1 Before Setting Up 2 Installation 3 Start-up/Shutdown

Setup Guide. Operating Instructions. 1 Before Setting Up 2 Installation 3 Start-up/Shutdown Operating Instructions Setup Guide 1 Before Setting Up 2 Installation 3 Start-up/Shutdown Read this manual carefully before you use this product and keep it handy for future reference. Introduction Important

More information

Installing TAM Air Assistant Software TM

Installing TAM Air Assistant Software TM Installing TAM Air Assistant Software TM Installation Instructions This document describes how to make a new installation of TAM Air Assistant. TAM Air Assistant is intended to be installed on a PC running

More information

USB Data Transfer Cable CA3-USBCB-01 Installation Guide

USB Data Transfer Cable CA3-USBCB-01 Installation Guide USB Data Transfer Cable CA3-USBCB-01 Installation Guide Safety Precautions This guide contains a variety of safety markings related to the safe and correct operation of the USB Data Transfer Cable. Be

More information

Installation & Operation Guide

Installation & Operation Guide Installation & Operation Guide This manual is the operation guide for Medal Editor. Please refer to this manual to install the software or create medal data used on the processing machine. Items That May

More information

User s Manual. Touch Panel Setting Tool. Important

User s Manual. Touch Panel Setting Tool. Important User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document

More information

HI-SPEED USB 2.0 FILE TRANSFER CABLE USER MANUAL

HI-SPEED USB 2.0 FILE TRANSFER CABLE USER MANUAL HI-SPEED USB 2.0 FILE TRANSFER CABLE USER MANUAL MODEL 365925 MAN-365925-UM-0308-01 Thank you for purchasing the MANHATTAN Hi-Speed USB 2.0 File Transfer Cable, Model 365925. Designed so you can transfer

More information

Quick Setup & Getting Started

Quick Setup & Getting Started Quick Setup & Getting Started HP Compaq Business PC Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and

More information

MF9300. Software setup guide

MF9300. Software setup guide MF900 Software setup guide 0000 79-0 S INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the

More information

Agilent U2941A Parametric Test Fixture

Agilent U2941A Parametric Test Fixture Agilent U2941A Parametric Test Fixture Operating Guide Agilent Technologies Notices Agilent Technologies, Inc. 2008 No part of this manual may be reproduced in any form or by any means (including electronic

More information

MX Sheet Version 2 Operating Manual (Introduction) -SW2DNC-SHEET-E

MX Sheet Version 2 Operating Manual (Introduction) -SW2DNC-SHEET-E MX Sheet Version 2 Operating Manual (Introduction) -SW2DNC-SHEET-E SAFETY PRECAUTIONS (Read these precautions before using this product.) Before using this product, please read this manual and the relevant

More information

USB 3.0 Docking Station

USB 3.0 Docking Station USB 3.0 Docking Station Dual Display DVI+HDMI - 6 PORT USB HUB - LAN - AUDIO User Manual HDOCKS300 www.hamletcom.com Index 1. INTRODUCTION... 5 2. PRODUCT OVERVIEW... 6 2.1 PORTS AND CONNECTORS... 6 3.

More information

Pre-Operation Confirmation Login and Logout Displaying Device Information Downloading and Installing Packages Appendix

Pre-Operation Confirmation Login and Logout Displaying Device Information Downloading and Installing Packages Appendix Professional IS/Standard Client Reference 1 2 3 4 5 Pre-Operation Confirmation Login and Logout Displaying Device Information Downloading and Installing Packages Appendix Read this manual carefully before

More information

USB Serial Converter

USB Serial Converter USB Serial Converter Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are

More information

PC-HELPER. Expansion Adapter for Express Card Slot EAD-CE-EC. User s Manual CONTEC CO.,LTD.

PC-HELPER. Expansion Adapter for Express Card Slot EAD-CE-EC. User s Manual CONTEC CO.,LTD. PC-HELPER Expansion Adapter for Express Card Slot EAD-CE-EC User s Manual CONTEC CO.,LTD. Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed below.

More information

Panaboard Overlayer User's Guide. Image Capture Software for Electronic Whiteboard (Panaboard)

Panaboard Overlayer User's Guide. Image Capture Software for Electronic Whiteboard (Panaboard) Panaboard Overlayer User's Guide Image Capture Software for Electronic Whiteboard (Panaboard) Contents Introduction... 3 Functional Overview... 3 Operation Flow... 3 Abbreviations... 4 Trademarks... 4

More information

User's Manual (detailed) Network Guide

User's Manual (detailed) Network Guide Projector CP-A220N/CP-A300N User's Manual (detailed) Network Guide (Type nos. CP-A220N, CP-A220NM, CP-A300N, CP-A300NM) Thank you for purchasing this product. This manual is intended to explain only the

More information

Windows 8 / 7 CONTENTS. USB to RS-422 Converter. Part Number: USB FEATURES. 2 SPECIFICATIONS. 2 CONNECTIONS.. 3

Windows 8 / 7 CONTENTS. USB to RS-422 Converter. Part Number: USB FEATURES. 2 SPECIFICATIONS. 2 CONNECTIONS.. 3 CONTENTS USB to RS-422 Converter Part Number: USB-422-1 INTRODUCTION 2 FEATURES. 2 SPECIFICATIONS. 2 PIN ASSIGNMENT 2 CONNECTIONS.. 3 DRIVER INSTALLATION QUICK GUIDE.. 3 DRIVER INSTALLATION EXAMPLES..

More information

Windows 8 / 7 CONTENTS. USB to RS-485 Converter. Part Number: USB FEATURES. 2 SPECIFICATIONS. 2 CONNECTIONS.. 3

Windows 8 / 7 CONTENTS. USB to RS-485 Converter. Part Number: USB FEATURES. 2 SPECIFICATIONS. 2 CONNECTIONS.. 3 CONTENTS USB to RS-485 Converter Part Number: USB-485-1 INTRODUCTION 2 FEATURES. 2 SPECIFICATIONS. 2 PIN ASSIGNMENT 2 CONNECTIONS.. 3 DRIVER INSTALLATION QUICK GUIDE.. 3 DRIVER INSTALLATION EXAMPLES..

More information

Contents. Notice. System Requirements. User Notice. Copyright. Software installation. FAT32 Format Utility. One Button File Backup.

Contents. Notice. System Requirements. User Notice. Copyright. Software installation. FAT32 Format Utility. One Button File Backup. Contents Notice System Requirements User Notice Copyright Software installation FAT32 Format Utility One Button File Backup Quick Launch Quick File Backup File Backup File Backup File Restore Erase File

More information

RADCOM s Platform Specifications. Valid from Version 7.10

RADCOM s Platform Specifications. Valid from Version 7.10 Valid from Version 7.10 RADCOM Ltd., November 2006 IP Notices: 2006 RADCOM Ltd. All rights reserved. RADCOM is a trademark of RADCOM Ltd. in Israel and/or other countries. Microsoft Windows and Microsoft

More information

Roland Software Package (RSP-009) SOFTWARE GUIDE

Roland Software Package (RSP-009) SOFTWARE GUIDE Roland Software Package (RSP-009) SOFTWARE GUIDE Thank you very much for purchasing this product. To ensure correct and safe usage with a full understanding of this product's performance, please be sure

More information

OS Update. Application. User s Guide. (ClassPad OS Version 3.04)

OS Update. Application. User s Guide. (ClassPad OS Version 3.04) For ClassPad 330 E OS Update (ClassPad OS Version 3.04) Application User s Guide CASIO Education website URL http://edu.casio.com ClassPad website URL http://edu.casio.com/products/classpad/ ClassPad register

More information

For ClassPad 300. ClassPad Manager. (ProgramLink) Limited Version. User s Guide. RJA

For ClassPad 300. ClassPad Manager. (ProgramLink) Limited Version. User s Guide.  RJA For ClassPad 300 E ClassPad Manager (ProgramLink) Limited Version User s Guide RJA510188-4 http://world.casio.com/edu_e/ Note Display examples shown in this User s Guide are intended for illustrative purposes

More information

C (1) Remote Controller. Setup software RM-IP Setup Tool guide Software Version Sony Corporation

C (1) Remote Controller. Setup software RM-IP Setup Tool guide Software Version Sony Corporation C-499-100-12 (1) Remote Controller Setup software RM-IP Setup Tool guide Software Version 1.1 2017 Sony Corporation Table of Contents Introduction... 3 Using This Manual...3 Downloading and Starting the

More information

InfoKey Programming Tool GUIDE aa

InfoKey Programming Tool GUIDE aa InfoKey Programming Tool GUIDE 22081-00000aa Copyright 2008 Segway Inc. All rights reserved. Trademarks Segway Inc. ( Segway ) owns a number of trademarks including but not limited to, Segway and the Segway

More information

Instruction Manual. Anker USB 3.0 Docking Station

Instruction Manual. Anker USB 3.0 Docking Station Instruction Manual Anker USB 3.0 Docking Station ABOUT THIS MANUAL This manual provides a beginner's introduction to installing, configuring, and using the USB 3.0 Display Dock. Information in this document

More information

PL200M. 200Mbps powerline adapter. User Manual

PL200M. 200Mbps powerline adapter. User Manual PL200M 200Mbps powerline adapter User Manual Content 1 Introduction... 130 1.1 System Requirements... 130 1.2 Packing List... 130 2 Safety Precautions... 131 3 Getting to Know the Adapter... 132 3.1 Ethernet

More information

USB port Hub With Gigabit Ethernet Adapter. User s Manual

USB port Hub With Gigabit Ethernet Adapter. User s Manual USB 3.0 3-port Hub With Gigabit Ethernet Adapter User s Manual 1 ABOUT THIS MANUAL This manual is designed for use with the USB 3.0 3 Port Hub with Gigabit Ethernet Adapter. Information in this document

More information

USB Link Adapter. User s Manual

USB Link Adapter. User s Manual USB Link Adapter User s Manual Safety Instructions Always read the safety instructions carefully Keep this User s Manual for future reference Keep this equipment away from humidity If any of the following

More information

Software Package Installation Instructions

Software Package Installation Instructions Introduction Novar provides an automatic installation package that involves reading simple, easy-to-follow instructions on each screen and clicking on the appropriate options. This document provides detailed

More information

8 Port USB to RS- 232/422/485 Octal Adapter. Product Manual. Coolgear, Inc. Version 1.1 April 2018 Model Number: USB-8COMi-RM.

8 Port USB to RS- 232/422/485 Octal Adapter. Product Manual. Coolgear, Inc. Version 1.1 April 2018 Model Number: USB-8COMi-RM. 8 Port USB to RS- 232/422/485 Octal Adapter Product Manual Coolgear, Inc. Version 1.1 April 2018 Model Number: USB-8COMi-RM 2 USB-8COMi-RM Product Manual Revision History Revision Date Author Comments

More information

Installation Instructions for HDS PC Software

Installation Instructions for HDS PC Software CONTENTS Installation Instructions for HDS PC Software INSTALLATION Preparation... 1 Installation Instructions. 2 TROUBLESHOOTING GUIDE Administrator Rights. 9 Connection to the Master Server 9 Communication

More information

Manual Version: V1.00. Video Decoder User Manual

Manual Version: V1.00. Video Decoder User Manual Manual Version: V1.00 Video Decoder User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Copyright Copyright 2016 Zhejiang

More information

USB Display Adapter User s Manual. 1. Introduction

USB Display Adapter User s Manual. 1. Introduction 1. Introduction This USB Display Adapter enables you to connect one more monitor, LCD or projector to a computer with a USB 2.0 port. For desktop users adding an extra monitor via USB connection is easier

More information

Quick Installation Guide TU-S9

Quick Installation Guide TU-S9 Quick Installation Guide TU-S9 V1 Table of Contents English 1 1. Before You Start 1 2. How to Install 2 Troubleshooting 7 Version 06.24.2010 1. Before You Start Package Contents TU-S9 CD-ROM (Driver) Multi-Language

More information

DataPort 250 USB 2.0 Enclosure User s Guide (800)

DataPort 250 USB 2.0 Enclosure User s Guide   (800) DataPort 250 USB 2.0 Enclosure User s Guide WWW.CRU-DATAPORT.COM (800) 260-9800 TABLE OF CONTENTS PAGE Package Contents 1 Features and Requirements 2 Installation 4 Trouble Shooting 13 Technical Support

More information

Installation guide E 1

Installation guide E 1 E 1 If the is connected to your computer, note data and other performance data as well as sound settings can be transferred between your computer and the via MIDI. By using the dedicated Editor/Plug-In

More information

JANOME DESKTOP ROBOT JR2000N Series. Operation Manual. <Setup> For Qualified Installer ONLY

JANOME DESKTOP ROBOT JR2000N Series. Operation Manual. <Setup> For Qualified Installer ONLY JANOME DESKTOP ROBOT JR2000N Series Operation Manual For Qualified Installer ONLY Thank you for purchasing the Janome Robot. *Read this manual thoroughly in order to properly use this robot. Be sure

More information

MW100 CAN Bus Module Configuration Tool (MX118-CAN-M30/S1) User s Manual

MW100 CAN Bus Module Configuration Tool (MX118-CAN-M30/S1) User s Manual MW100 CAN Bus Module Configuration Tool (MX118-CAN-M30/S1) User s Manual 1 Contents Before Using the Software... 3 Explanation of Functions... 3 MX118 Part Names and Functions... 3 Operation Guide... 4

More information

User s Manual. USB 2.0 Multi-Plus Card Reader w/3-port Hub. Table of Contents

User s Manual. USB 2.0 Multi-Plus Card Reader w/3-port Hub. Table of Contents User s Manual USB 2.0 Multi-Plus Card Reader w/3-port Hub Table of Contents Safety Instructions..... 1 Introduction...... 1 Features........2 System Requirements.......2 Package Contents...... 2 Specification.....

More information

CS-231. User Manual. Copyright ATEN International Co., Ltd. Manual Part No. PAPE G Printing Date: 11/2006

CS-231. User Manual. Copyright ATEN International Co., Ltd. Manual Part No. PAPE G Printing Date: 11/2006 User Manual CS-231 Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them. This package

More information

P3PC ENZ0. Troubleshooting. (installation)

P3PC ENZ0. Troubleshooting. (installation) P3PC-3702-01ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap S1500/S1500M/S1300i/S1300/ S1100 (hereinafter referred to as "the ScanSnap"). This

More information

User s Manual. PCI Bus Expansion Adapter for PCI Bus PC-Slot EAD(PCI)BE PCI Bus Expansion Adapter for Low Profile PCI PC-Slot EAD(LPCI)BE

User s Manual. PCI Bus Expansion Adapter for PCI Bus PC-Slot EAD(PCI)BE PCI Bus Expansion Adapter for Low Profile PCI PC-Slot EAD(LPCI)BE PC-HELPER PCI Bus Expansion Adapter for PCI Bus PC-Slot EAD(PCI)BE PCI Bus Expansion Adapter for Low Profile PCI PC-Slot EAD(LPCI)BE User s Manual CONTEC CO.,LTD. Check Your Package Thank you for purchasing

More information

Getting Started Guide

Getting Started Guide Getting Started Guide DESKTOP Welcome to LumenX Programming Engine Desktop Model The LumenX Desktop is Data I/O s desktop version programming engine. Designed for programming first-article builds to validate

More information

Setup Guide. Before Setting Up. Installation. Start-up/Shutdown

Setup Guide. Before Setting Up. Installation. Start-up/Shutdown Setup Guide Before Setting Up Installation Start-up/Shutdown For information not in this manual, refer to the HTML/PDF files on the supplied CD-ROM. Read this manual carefully before you use this product

More information

USB Memory Adapter MAUSB-500 REFERENCE MANUAL

USB Memory Adapter MAUSB-500 REFERENCE MANUAL USB Memory Adapter MAUSB-500 REFERENCE MANUAL MAUSB-200 ReferenceManual Introduction The MAUSB-500 USB Memory Adapter (hereinafter referred to as the adapter ) is designed exclusively for reading and writing

More information

USB 3.0 to 4K DP Adapter. User's Manual

USB 3.0 to 4K DP Adapter. User's Manual USB 3.0 to 4K DP Adapter User's Manual Table of Contents SAFETY INSTRUCTIONS... 1 COPYRIGHT... 1 TRADEMARKS... 1 REGULATORY COMPLIANCE... 2 FCC CONDITIONS... 2 CE... 2 WEEE INFORMATION... 2 INTRODUCTION...

More information