Print Client KM. User s Manual
|
|
- Carmella Patterson
- 6 years ago
- Views:
Transcription
1 Print Client KM User s Manual
2 Regarding this manual This manual explains how to install Print Client KM and how to use it. Print Client KM can be used with Microsoft Windows 2000/XP/Vista. The intended user of this manual is whom already is aware of Windows 2000/XP/Vista basic operation of start button, task bar, mouse, and keyboard. If a user does not have such a background, please refer to operation manual included in the Windows 2000/XP/Vista. * For Windows Vista, use the default settings instructed by the manual for installation configuration. * For Windows Vista, keep the destination folder unchanged. 1
3 Index 1. CONFIGURATION INSTALLATION METHOD REGISTRATION OF PLOTTER BASIC OUTPUT PROCEDURE FROM PRINT CLIENT KM STEP 1: Selection of Output printer STEP 2: Output Setting STEP 3: Registration of output file STEP 4: Print starts OPERATING PRINT CLIENT KM Explanation of Main Window Explanation of Custom Size Dialog Box Explanation of Stamp Setting Dialog Box Explanation of Image Placement Dialog Box Explanation of HPGL Setting Dialog Box Explanation of Calcomp Setting Dialog Box Explanation of Header Setting Dialog Box
4 1. Configuration PC Hardware requirement to install Print Client KM is as follows. OS (Operation System) Operation guaranteed models, which are equivalent to IBM PC-AT (DOS/V machine), such as Microsoft Windows 2000/ XP/Vista. * For Windows Vista, use the default settings instructed by the manual for installation configuration. CPU Celeron 400 MHz or faster is recommended. System Memory 256 MB or more is recommended. Hard Disk 10 GB or more is recommended. 3
5 2. Installation Method Install KM-4800w Printer Driver prior to install Print Client KM. Installation Procedure of Print Client KM 1. Insert Installation Disk in CD-ROM driver. 2. Double click Print Client KM.exe, which is included in the following shown directory of the disk, and then installation starts. \Software\Print Client KM\ 3. Select Setup Language, and click [OK] 4. Click [Next] 4
6 5. Select Unit, and then click [Next]. 6. Select the folder to be installed, and then click [Next]. 5
7 7. Select Program Folder, and then click [Next]. 8. Click [Finish], and finish the installation. 9. Print Client KM Icon is created on Desk Top. Installation of Print Client KM is completed. 6
8 To update the Print Client KM, uninstall the Print Client KM by Uninstall Print Client KM, and install the update version of Print Client KM. * Note If you install Print Client KM to a PC which has already installed one, Install Shield Wizard will attempt to uninstall the existing Print Client KM, and will not setup the new one. Reinstall Print Client KM after that in this case. 7
9 3. Registration of Plotter 1. Double click Print Client KM icon on Desk Top to start the following program. 8
10 2. Select Plotter Registration from the pull-down menu of Option on the Menu Bar. 3. Select KM-4800w in Printer View, and click [Add]. 9
11 4. Click [OK]. 5. The name of printer you have registered is indicated in Plotter. 10
12 4. Basic output procedure from Print Client KM 4.1. STEP 1: Selection of Output printer Select output printer from Plotter List, which is located on left top of the screen STEP 2: Output Setting Set the output condition using Default Settings, which is located on right side of screen. (Output conditions are output size, output paper and the output quantity.) Output is available without changing anything, normally STEP 3: Registration of output file. Select output file directory from following column A, and then click the file you wish to output from column B. 11
13 Selected files are registered in the following column STEP 4: Print starts Click the Print button on the right bottom of the screen when all the necessary files have been registered. Files are printed out from the printer. Above shown is the brief operation procedure until it is output. 12
14 5. Operating Print Client KM 5.1. Explanation of Main Window Contents of the Menu Bar <File> Exit <View> View Selected Image Refresh : Print Client KM is finished. : The image of the selected file is displayed in the Viewer. : The latest information of files and folders is displayed. <Order> Move File Up One Move File Down One Move File Top Move File Bottom Reverse File Order : The selected file is moved up. : The selected file is moved down. : The selected file is moved to the top of the list. : The selected file is moved to the bottom of the list. : The order of selected files is reversed. (If only one file is selected, Reverse File Order becomes invalid.) Remove File from List : The selected file is deleted from the list. Back to Default Setting : Set Output setting of designated file, to Default setting. 13
15 <Option> Printer Registration Reload Sent Jobs : Register printer to use Print Client KM. : Refer to 20 jobs which have been done already, and can reload any of them. Default Value Setting : Specifies the default Pen Width and Gray for HPGL and Calcomp. 14
16 Unit : Select registered standard size of Output Size in Default Settings. case of ISO case of ANSI Localize Settings : Messages are displayed in a selected language. <Help> About Print Client KM : Version information of Print Client KM can be referred. Selecting Files <Plotter> Decide which plotter the output job is sent. It is possible to output to only KM-4800w printer. <File Type> Specify the displayed file type. All (*.*) Supported Files (*.plt, *.906, *.907, *.tif, *.cal, *.bmp) HPGL (*.plt) Calcomp (*.906, *.907) TIFF (*.tif) CALS (G4) (*.cal) BMP (*.bmp) PDF (*.pdf) Option 15
17 <Select All> If you click on Select All, you can register all of currently displayed files to the output job. <All Clear> If you click on All Clear, you can delete all of currently displayed files from the output job. Select files to be printed out. All files are contained in folders similar to the Explorer. Adding / Removing Files to be output If you select some file by left clicking, that file is registered to the output job and its filename is colored with violet. If you again select the registered file (Filename is colored with violet.) by left clicking, it is deleted from the output job and its filename is not colored. It is possible to register some files if you click each file pressing the Shift Key. If you select the file, which has already been registered to, the output job (Filename is colored with violet.) by right clicking then click on Add, you can register that file again to the same output job and that file is colored with red. If you select the file, which has never been registered to the output job (Filename is not colored.) by right clicking then click on Add, you can register that file normally to the output job. If you select some file by right clicking then click on View, the image of that file is displayed in the Viewer uses existent application. 16
18 <File Setting> If you wish to check or change the setting information of each registered output file in the File Name list, select your required file, then click on File Setting. The following File Setting Dialog Box appears showing the setting information of that file. At first this dialog box shows the same setting values with Default Settings block of the Main window. Change each setting item as you like, and then click on OK. Your settings are applied to the selected file. The File Setting Dialog Box also appears on the screen if you double-click the file. If you wish to apply your settings to multiple files, select as many files as you need by left clicking pressing the Shift Key, and then click on File Settings. <File operation in job list> The following items appear by right clicking after selecting some file in the File Name list. Move File Up One The selected file is moved up. Move File Down One The selected file is moved down. Move File Top The selected file is moved to the top of the list. Move File Bottom The selected file is moved to the bottom of the list. Reverse File Order The order of selected files is reversed. (If only one file is selected, Reverse File Order becomes invalid.) Remove File From List The selected file is deleted from the list. Back to Default Setting Set Output setting of designated file, to Default setting. <File View> The image of the registered output file is displayed. After selecting the file, click on File View and display image. 17
19 <Delete All> Click on Delete All to delete all of registered output files from the File Name list. <Load> Click on Load to load the output job that has been registered already. <Save> Click on Save to save the output job. <Last Job> Click on Last Job to reload the output job that has been outputted at the latest opportunity. <Job Name> Job name is indicated. <XX Selected> It is indicate how many files are registered. <File Name> Registered file names are listed including their path. <Copies> It is indicated how many sheets each file is printed out. <Output Size> The selected output size for each output file is indicated. <Media> It is indicated which material of printing media is used for printing of each output file. <Stamp> It is indicated whether some Stamp Image is provided (on) or not (off) to each output file. <Paper Information> Real-time information about roll media in the plotter is indicated. <Printer Information> Real-time information about printer is indicated. 18
20 About Default Settings <Output Size> Select any of the following output sizes from the pull-down menu. (1) Original The output size is as large as output file s original size. Default setting is Original. (2) Percent Both X : % and X,Y Separate are validated. If you decide the percentage for X%, output file s original size is enlarged or reduced depending on your percentage setting. If you check X,Y Separate, Y : % is validated also and it becomes possible to decide horizontal output size (X) and vertical one (Y) separately. Setting range is from 10.00% to % in 0.01% increment. (3) Standard inch size or standard ISO A series size Output file s original size is enlarged or reduced to be the selected standard size. (4) Custom The following Custom Size Dialog Box appears and you can register output size optionally. As for the detail, refer to Explanation of Custom Size Dialog Box. your preferable 19
21 <Edit> <Delete> To change the registered Custom Size, click on Edit to pop up the Custom Size Dialog Box. If you select other output size than Custom, Edit is invalid. To delete the registered Custom Size, click on Delete. If you select other output size than Custom, Edit is invalid. <Media Type> Decide which material of printing media is used for printing. Select any of the following materials from the pull-down menu. Default setting is Plain. Plain Vellum Film Any If you select Any, a roll media that suit the output size is selected regardless of the material. <Deck> Decide the paper Deck. Default setting is Auto. Auto Deck 1 Deck 2 Bypass <Rotation> Select any of the following rotation. Default setting is Auto. Auto 0 degree 90 degree 180 degree 270 degree 20
22 <Count> Decide how many sheets each file is printed out. Setting range is from 1 to 999. <Format Cut> Select either Standard Cut or Synchronous Cut. If Standard Cut is checked, you select the Standard Cut and the printing media is cut in some standard size. If it is not checked, you select the Synchronous Cut and the printing media is cut as long as printed image. Default setting is Standard Cut. <Mirror> The printed image is turned over. If it is not checked, the printed image is not turned over. <Negative Image> A negative image can be printed. If it is not checked, the image is not inverted. <Margin> Add a preferable margin to the Leading Edge and the Trailing edge of output print. <Stamp> Its indicator lights up and the following Stamp Setting Dialog Box appears. Some Stamp Image is provided to the print when the indicator is lighting up. If you click on Stamp when the indicator is lighting up, it is put out and no Stamp Image is printed. As for the detail, refer to Explanation of Stamp Setting Dialog Box. 21
23 <Image Placement> The following Image Placement Dialog Box appears. As for the detail, refer to Explanation of Image Placement Dialog Box. 22
24 <HPGL Settings> The following HPGL Setting Dialog Box appears. As for the detail, refer to Explanation of HPGL Setting Dialog Box. 23
25 <Calcomp Settings> The following Calcomp Setting Dialog Box appears. As for the detail, refer to Explanation of Calcomp Setting Dialog Box. 24
26 About Job Settings <Job Count> Decide how many times a job is outputted. Setting range is from 1 to 999. <Collate> When Collate is checked (ON), collation is done. When it is not checked (OFF), collation is not done. Default setting is Collate ON. Example : Files A, B and C are printed out 3 jobs for each one. Collate ON ABC, ABC and ABC Collate OFF AAA, BBB and CCC <Density> Decide the density of the printed image. Setting range is from 1 to 13. Default value is 10. <Header> Its indicator lights up and the following Header Setting Dialog Box appears. Header Information is printed when the indicator is lighting up. If you click on Header when the indicator is lighting up, it is put out and no Header Information is printed. In addition to the following shown Requester and Job Number, Filename and Date/Time can be printed as the Header Information. As for the detail, refer to Explanation of Header Setting Dialog Box. 25
27 <Output Job> Print: Ordinal printing. Job is sent to Wait Queue. Pause: Job is sent to Pause Queue. 26
28 5.2. Explanation of Custom Size Dialog Box <Name> Give a name for your Custom Size. You cannot give the name Custom. <Width> Input your required width of the output size. Default value is 297.0mm. <Length> Input your required length of the output size. Default value is 210.0mm. 27
29 5.3. Explanation of Stamp Setting Dialog Box Click [Stamp] in Default Settings region to pop up Stamp Settings. <Stamp Setting> Enter the name to save the new stamp setting. If you click on, you can select any of existent stamp settings from the pull-down menu. <Save> Click on Save after inputting the name to save the new stamp setting. <Delete> Click on Delete to delete the existent stamp setting. 28
30 <Merge Type> If Stamp Image and output image overlaps with each other, the following process is done according to your selection. Opaque Transparent (This function is not valid at raster file) <Gray> Decide the density of the Stamp Image. From 1% to 100% Default value is 100%. <Rotation> Decide the angle of the Stamp Image. 0 to 360 degrees arc counter-clockwise Default value is 0 degrees. <Mirror> The Stamp Image is turned over. <Scaling> The Stamp Image is automatically enlarged or reduced if output size is enlarged or reduced. <Stamp placement> Decide where to print the Stamp Image. (9 positions) <Frame> If you check Frame, the Stamp Image is framed. Also, it becomes possible to decide the following settings. Thickness : You can decide the thickness of frame line. Default value is 0.5mm Margin : You can decide how much margin is kept between Stamp Image and frame line. Default value is 1.0mm <Offset> After deciding Stamp placement, you can adjust the position. X : If you increase the setting value, the Stamp Image is moved to the right. If you decrease it, it is moved to the left. Y : If you increase the setting value, the Stamp Image is moved upward. If you decrease it, it is moved downward. Setting ranges of Offset (Both X; and Y;) are from -500mm to +500mm in 1mm increment. Default value is 0mm. <Text> It becomes possible to input the text. The inputted text is stamped on the print. <Font> Decide the font of the text. To print a stamp text in Chinese, select a font available for Chinese. <Macros> Select any of the following macros. The selected macro is printed as a text stamp. Date Time File Name File Data File Time User Name Distribution The date of request to output the job is stamped. The time of request to output the job is stamped. The filename of output file is stamped. The date that the file is created is stamped. The time that the file is created is stamped. User s name of outputting computer is stamped. Distribution (To whom the print is distributed) is stamped. 29
31 Page Number Computer Name Page number is printed when multiple pages are filed. The name of outputting computer is stamped. <Image> It becomes possible to print the image of selected file as the Stamp Image. <Placement> Decide where to place the image against the text. Left of Text Right of Text Above Text Below Text Center of Text The image is placed to the left of the text. The image is placed to the right of the text. The image is placed above the text. The image is placed below the text. The image is placed at the center of the text. <Margin> You can decide how much margin is kept between image and text. Setting range of Margin is from 0.0mm to 50.0mm in 0.1mm increment. Default value is 5.0mm 30
32 5.4. Explanation of Image Placement Dialog Box Click [Image Placement] in Default Setting region to pop up Image Placement window. <Image Placement> Select any of 9 positions of the output image on the printing media. <Offset> After deciding Image Placement, adjust the position more precisely. X : To increase the setting value, the output image is moved to the right. To decrease it, it is moved to the left. Y : To increase the setting value, the output image is moved upward. To decrease it, it is moved downward. Setting ranges of Offset (Both X; and Y;) are from -500mm to +500mm in 1mm increment. Default value is 0mm. 31
33 5.5. Explanation of HPGL Setting Dialog Box Click [HPGL Settings] in Default Settings region to pop up HPGL Settings window. <Setting> Input the name here if you will save the new HPGL setting. If you click on, you can select any of existent HPGL settings from the pull-down menu. <Save> Click on Save after inputting the name to save the new HPGL setting. <Delete> Click on Delete to delete the existent HPGL setting. <Pen Setting> The setting of each pen is indicated here. This list is used when you check Use custom setting. Pen No. Pen Numbers are indicated. (From 1 to 255) Width The pen width decided by Custom Setting is indicated. Gray The gray ratio decided by Custom Setting is indicated. <Width> Use file setting : To use the pen width setting decided in the file. Use custom setting : To use the pen width setting decided by Custom Setting. Setting range of Width is from 0.04mm to 10.00mm in 0.01mm increment. Default value is 0.25mm. 32
34 <Gray> Use file setting : To use the gray ratio setting decided in the file. Use custom setting : To use the gray ratio setting decided by Custom Setting. Setting range of Gray is from 1% to 100% in 1% increment. Default value is 100%. <Custom Setting> It becomes possible to change Custom Setting. At first select some Pen No., change Width and Gray as you like, and then click on Set. Your Width and Gray settings are applied to the selected Pen No. Width Gray Set Default You can decide the width of pen. You can decide the gray ratio of pen. After changing the above Width and Gray, click on Set to apply them to the selected Pen No. All pen settings are initialized. <Pen Scale> The pen width is also enlarged or reduced if output size is enlarged or reduced. If you do not check it, the pen width is same even if output size is enlarged or reduced. <Clipping> The setting value of PS (print size) Command is taken as the image size. If you do not check it, the setting value of PS Command is ignored and image s actual size is taken as the image size. <RTL Raster Density> Adjust the density of HPGL RTL Image. However, it is effective only if RTL image data are multi-valued image. Setting range of RTL Raster Density is from 0 to 100 in 1 step increment. Default value is
35 5.6. Explanation of Calcomp Setting Dialog Box Click [Calcomp Settings] in Default Settings region to pop up Calcomp Settings window. <Setting> Input the name here if you will save the new Calcomp setting. If you click on, you can select any of existent Calcomp settings from the pull-down menu. <Save> Click on Save after inputting the name to save the new Calcomp setting. <Delete> Click on Delete to delete the existent Calcomp setting. <Pen Setting> The setting of each pen is indicated here. This list is used when you check Use custom setting. Pen No. Pen Numbers are indicated. (From 1 to 255) Width The pen width decided by Custom Setting is indicated. Gray The gray ratio decided by Custom Setting is indicated. 34
36 <Width> Use file setting : To use the pen width setting decided in the file. Use custom setting : To use the pen width setting decided by Custom Setting. Setting range of Width is from 0.04mm to 10.00mm in 0.01mm increment. Default value is 0.25mm. <Gray> Use file setting : To use the gray ratio setting decided in the file. Use custom setting : To use the gray ratio setting decided by Custom Setting. Setting range of Gray is from 1% to 100% in 1% increment. Default value is 100%. <Custom Setting> It becomes possible to change Custom Setting. At first select some Pen No., change Width and Gray as you like, and then click on Set. Your Width and Gray settings are applied to the selected Pen No. Width Gray Set Default You can decide the width of pen. You can decide the gray ratio of pen. After changing the above Width and Gray, click on Set to apply them to the selected Pen No. All pen settings are initialized. <Pen Scale> The pen width is also enlarged or reduced if output size is enlarged or reduced. If you do not check it, the pen width is same even if output size is enlarged or reduced. <Synchronization Setting> Set a preferable Synchronization by either Automatically Setting or Manual Setting. Check Auto Detection in normal use. You can manually configure Double Sync, Checksum, Sync-Char and End-Char. <Step Setting> Change the output size of image by setting of a step number. Usually, set to 800 for Step Setting. 35
37 5.7. Explanation of Header Setting Dialog Box Click [Header] in Job Settings region to pop up Header Settings window. <Placement> Leading Left Header is printed at the left.(4mm from the leading edge) Leading Right Header is printed at the right.(4mm from the leading edge) Trailing Left Header is printed at the left.(4mm from the trailing edge) Trailing Right Header is printed at the right.(4mm from the trailing edge) Default setting is Leading Left. <Text Size> Input the size of letter in either metric (mm). Setting range of Text Size is from 2.0mm to 10.0mm in 0.1mm increment. Default value is 3.0mm <Requester> Input the name of requester. <Job Number> Input the job number. (Notes) The format of Header and Footer is as follows. Font Order of information Arial File Name, Date/Time/Year, Requester and Job Number (Example) SD070301_ tif Fri Mar 02 14:05: Requester: D. Smith Job No:
38 Print Client KM User s Manual Rev. 1.0 The Copyright Act protects this manual. It is prohibited to copy or duplicate all or a part of this manual without permission. 37
7.X Enterprise Client Version. Version A1
Version A1 PrintNET 7.X Enterprise Introduction PrintNET Enterprise includes all the features found in PrintNet Client, plus provides a versatile electronic work order tool that allows decentralized users
More informationMIMAKI ENGINEERING CO., LTD.
CAMLINK Instruction manual MIMAKI ENGINEERING CO., LTD. TKB Gotenyama Building, 5-9-41, Kitashinagawa, Shinagawa-ku, Tokyo 141-0001, Japan Phone: +81-3-5420-8671 Fax: +81-3-5420-8687 URL: http://www.mimaki.co.jp/
More informationKIP Request Operator Guide
KIP Request Operator Guide Contents Introduction... 1 Request Installation... 2 Installation... 2 Windows Driver Access... 2 CD Installation... 3 First Time Run... 3 Master Password... 3 Find KIP Printers...
More informationOcé Engineering Exec. Electronic Job Ticket
Océ Engineering Exec Electronic Job Ticket Océ-Technologies B.V. Copyright 2004, Océ-Technologies B.V. Venlo, The Netherlands All rights reserved. No part of this work may be reproduced, copied, adapted,
More informationAbout This Manual. How to use this operation manual. Symbols. Trademarks. Software copyright. Regarding this manual. Introduction
Introduction About This Manual This manual is your introduction to the Kimosetter 340 RIP 2.0, a Macintosh software RIP to work with Kimosetter 340, a plate setter, and Kimosetter 340i, a film setter.
More informationRequest Operator s Guide
Request Operator s Guide Version A1 Version A1 Contents Introduction... 1 Request Installation... 2 Installation... 2 Windows Driver Access... 2 CD Installation... 3 First Time Run... 3 Master Password...
More informationPrint. Table of Contents
User Guide Table of Contents Introduction... 1 Print Installation... 2 System Requirements... 2 Installation... 2 CD Installation... 3 Installing from Windows Printer Driver... 3 Installing from PrintNET...
More informationPS Printer Driver. for Windows 7. User s Manual
PS Printer Driver for Windows 7 User s Manual Regarding this manual This manual explains how to install Windows PS Printer Driver and how to use it. This PS Printer Driver can be used with Microsoft Windows
More informationPS Printer Driver. for Windows Vista. User s Manual
PS Printer Driver for Windows Vista User s Manual Regarding this manual This manual explains how to install Windows PS Printer Driver and how to use it. This PS Printer Driver can be used with Microsoft
More informationOcé Engineering Exec. Advanced Import and Index
Océ Engineering Exec Advanced Import and Index Océ-Technologies B.V. Copyright 2004, Océ-Technologies B.V. Venlo, The Netherlands All rights reserved. No part of this work may be reproduced, copied, adapted,
More informationKIP Certified AutoCAD Driver. KIP Print Operators Guide
KIP Certified AutoCAD Driver KIP Print Operators Guide Table of Contents Introduction... 1 KIP Print Installation... 2 System Requirements... 2 Installation... 2 CD Installation... 3 Installing from KIP
More informationPS Printer Driver. for Windows 2000/XP. User s Manual
PS Printer Driver for Windows 2000/XP User s Manual Regarding this manual This manual explains how to install Windows PS Printer Driver and how to use it. This PS Printer Driver can be used with Microsoft
More informationUser Guide 701P Wide Format Solution Wide Format Scan Service
User Guide 701P44865 6204 Wide Format Solution Wide Format Scan Service Xerox Corporation Global Knowledge & Language Services 800 Phillips Road Bldg. 845-17S Webster, NY 14580 Copyright 2006 Xerox Corporation.
More informationD-Cut Master MANUAL NO. OPS639-UM-153 USER'S MANUAL
D-Cut Master MANUAL NO. OPS639-UM-153 USER'S MANUAL Software License Agreement Graphtec Corporation ( Graphtec ) grants the user permission to use the software (the software ) provided in accordance with
More informationCHAPTER 2 COPIER 2-1 BEFORE USING THE MACHINE AS A COPIER SPECIAL MODES BASIC PROCEDURE FOR MAKING COPIES
CHAPTER COPIER This chapter provides detailed explanations of the procedures for using the copy function. BEFORE USING THE MACHINE AS A COPIER BASE SCREEN OF COPY MODE.............. -3 COPYING SEQUENCE......................
More informationMIMAKI ENGINEERING CO., LTD.
For Windows XP/Windows 2000 Cutting Application Software SimpleCut Operation Manual MIMAKI ENGINEERING CO., LTD. D201463 Contents Introduction 1 About this Manual 2 Chapter 1 Installation Procedure 3
More informationKIP Windows Driver. User Guide
User Guide Introduction The KIP Windows driver is WHQL certified for 64 and 32 Bit Windows Vista, XP and XP Server, meaning the KIP Windows driver meets explicit standards of reliability and quality. The
More informationMODEL: MX-5500N MX-6200N MX-7000N. Copier Guide
MODEL: MX-5500N MX-600N MX-7000N Copier Guide TABLE OF CONTENTS ABOUT THIS MANUAL........................ 4 MANUALS PROVIDED WITH THE MACHINE... 5 BEFORE USING THE MACHINE AS A COPIER BASE SCREEN OF COPY
More informationMODEL: MX-6201N MX-7001N. Printer Guide
MODEL: MX-6201N MX-7001N Printer Guide TABLE OF CONTENTS ABOUT THIS MANUAL........................ 4 MANUALS PROVIDED WITH THE MACHINE... 5 PRINTER FUNCTION OF THE MACHINE.......... 6 1 PRINTING FROM WINDOWS
More informationLinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8:
LinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8: After you install LinkMotion software and set up all settings launch CorelDraw software. Important notes: Solustan s LinkMotion driver
More informationLABEL MATRIX TEKLYNX V E R S I O N 8 Q U I C K S T A R T G U I D E
TEKLYNX LABEL MATRIX V E R S I O N 8 Q U I C K S T A R T G U I D E Note Quick Start Guide The information in this manual is not binding and may be modified without prior notice. Supply of the software
More informationDesign and Print Instruction Manual
Diamond Design Design and Print Instruction Manual Contents Installation 1 Installing the Diamond Design Software 2-3 Installing the ORIGINAL Argox OS-214 printer drivers 4 Installing the EXCEL Argox OS-314
More informationPrinter Driver. for Windows 7. User s Manual
Printer Driver for Windows 7 User s Manual Regarding this manual This manual explains how to install Windows Printer Driver and how to use it. This Printer Driver can be used with Microsoft Windows 7.
More informationMODEL: MX-2300N MX-2700N. Printer Guide
MODEL: MX-2300N MX-2700N Printer Guide CONTENTS ABOUT THIS MANUAL........................ 3 MANUALS PROVIDED WITH THE MACHINE... 4 PRINTER FUNCTION OF THE MACHINE.......... 5 1 PRINTING FROM WINDOWS BASIC
More informationOPERATION MANUAL MIMAKI ENGINEERING CO., LTD. D200652
OPERATION MANUAL MIMAKI ENGINEERING CO., LTD. http://www.mimaki.co.jp E-mail:traiding@mimaki.co.jp D200652 About FineCut Thank you very much for purchasing a product of Mimaki. FineCut, a plug-in software
More informationMANUAL NO. OPS647-UM-151 USER S MANUAL
MANUAL NO. OPS647-UM-151 USER S MANUAL Software Usage Agreement Graphtec Corporation ( Graphtec ) hereby grants the purchaser and authorized User (the User ) the right to use the software (the Software
More informationPrinter Driver. for Windows 2000/XP. User s Manual
Printer Driver for Windows 2000/XP User s Manual Regarding this manual This manual explains how to install Windows Printer Driver and how to use it. This Printer Driver can be used with Microsoft Windows
More informationA warning provides additional information which, if ignored, may result in a risk of personal injury.
Pro8432WT About This Manual Terms in this document The following terms are used in this manual. Indicates important information on operations. Make sure to read sections with this mark. Indicates additional
More informationBOXOFT Image to PDF s allow you scans paper documents and automatically s them as PDF attachments using your existing software
Note: This product is distributed on a try-before-you-buy basis. All features described in this documentation are enabled. The registered version does not insert a watermark in your generated pdf documents.
More informationTrademark and Copyrights
Trademark and Copyrights Océ Imagistics is a registered trademark of Océ Imagistics Inc. The Océ Imagistics logo is a registered trademark of Océ Imagistics Inc. Microsoft, Windows, Windows 3.1, Windows
More informationTrademark and Copyrights
Trademark and Copyrights Océ Imagistics is a registered trademark of Océ Imagistics Inc. The Océ Imagistics logo is a registered trademark of Océ Imagistics International Inc. Microsoft, Windows, Windows
More informationKIMOTO K I M O S E T T E R R I P. Kimosetter RIP User Guide 1. Revised: February 2015 U SER GUID E (FOR W INDOWS 7 )
KIMOTO K I M O S E T T E R R I P U SER GUID E (FOR W INDOWS 7 ) Revised: February 2015 Kimosetter RIP User Guide 1 COPYRIGHT AND TRADEMARKS Kimosetter RIP User Guide Copyright Notices for the Software
More informationIssues fixed in this release
Customer Release Notes Fiery EXP8000 Color Server, version 2.0 This document contains information about the Fiery EXP8000 Color Server software version 2.0. Before using the Fiery EXP8000 Color Server
More informationROBO Master OPS656. USER'S MANUAL MANUAL NO. OPS656m-UM Introduction 1.1 Features System Requirements... 3
USER'S MANUAL MANUAL NO. m-um-152 Software Usage Agreement... 2 Registered Trademarks... 2 Notes on this Manual... 2 Disclaimer... 2 1 Introduction 1.1 Features... 3 1.2 System Requirements... 3 2 Installing
More informationGCC vinyl cutter, cutting plotter for sign making
Plotter Setup In "Plotter Setup," you can choose "Plotter List," "Environment," "Pen," and so on. [Plotter list] In this area, you can choose the machine type and set some basic information for your plotter
More informationPostScript User Guide
PostScript User Guide ME3614E4-1 2006 by Fuji Xerox Co., Ltd. All rights reserved. Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory
More informationRepro Station. User Manual
Repro Station User Manual Océ-Technologies B.V. This manual covers Repro Station software version 3.2 Trademarks HP-GL, HP-GL/2, HP-RTL are trademarks of Hewlett Packard Company Microsoft and MS are registered
More informationFiery Driver for Windows
2017 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 27 April 2017 Contents 3 Contents...5 Fiery Driver Updater...5 Create custom Fiery
More informationBoxoft PDF Stamper does NOT require Adobe Acrobat, and produces documents compatible with Adobe Acrobat Reader Version 5 and above.
Note: This product is distributed on a try-before-you-buy basis. All features described in this documentation are enabled. The registered version does not insert a watermark in your generated pdf documents.
More informationFlowNEST User s Guide. M-323 Version 6.0
FlowNEST User s Guide M-323 Version 6.0 FLOWMASTER FlowNEST User's Guide Due to continuing product improvement, the information contained in this document is subject to change without notice. Flow International
More informationGA Printing from Mac OS
GA-1310 Printing from Mac OS 2009 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45085389 5 May 2009 CONTENTS 3 CONTENTS INTRODUCTION
More informationRISO Controller PS7R-9000/5000
RISO Controller PS7R-9000/5000 for Printer Driver 00E Preface The RISO PS7R Controller Printer Driver is a dedicated printer driver for the RISO PS7R Controller. This manual describes various functions
More informationRoland CutChoice. Ver. 1 USER S MANUAL
Roland CutChoice Ver. 1 USER S MANUAL Thank you very much for purchasing the Roland cutter. To ensure correct and safe usage with a full understanding of this product s performance, please be sure to read
More informationScan Station. User Manual
Scan Station User Manual Océ-Technologies B.V. This manual contains a description of Scan Station. The introduction (chapter 1) contains a general description of the working methods for using Scan Station
More information-Table of Contents- 1. Overview Installation and removal Operation Main menu Trend graph... 13
Thank you for buying Data Analysis Software. In order to use this software correctly and safely and to prevent trouble, please read this manual carefully. Notice 1. No part of this manual can be reproduced
More informationUsing Your Documentation
Printer Guide IMPORTANT: Read this manual carefully. Use this manual when you need quick reference help for the printer feature of your machine. Using Your Documentation Your machine includes the following
More informationCustomer Release Notes Fiery Q5000 for igen3, version 3.0
Customer Release Notes Fiery Q5000 for igen3, version 3.0 This document contains information about Fiery Q5000 for igen3 server software version 3.0. Before using the Fiery Q5000 for igen3 with version
More informationKIP Certified AutoCAD Driver KIP TOUCHSCREEN
KIP Certified AutoCAD Driver KIP TOUCHSCREEN Contents * Feature not applicable to KIP Network Printer Only User Login/Quick Search... 10 Copy Mode Monochrome*... 10 Main Screen...11 Simple Copying...13
More informationLegal Notes. Regarding Trademarks KYOCERA MITA Corporation
Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from
More informationDP-180/190/1520P/1820P/1820E/2330/3030/3530/4530/6030
Model No. Software Operating Instructions (For Panasonic Printing System PostScript3) DP-180/190/1520P/1820P/1820E/2330/3030/3530/4530/6030 Before Starting Before operating this software, please read these
More informationSoftware User s Guide
Software User s Guide For DCP users: This documentation is for both MFC and DCP models. Where it says MFC in this user s guide, please read MFC-xxxx as DCP-xxxx. Version 0 TWN-ENG Applicable models This
More informationFor Windows VISTA /Windows XP Cutting Application Software Simple Studio. Operation Manual MIMAKI ENGINEERING CO., LTD. D
For Windows VISTA /Windows XP Cutting Application Software Simple Studio Operation Manual MIMAKI ENGINEERING CO., LTD. D201923-11 Contents Introduction 1 About this Manual 3 Chapter 1 Installation Procedure
More informationSHARP Pen Software. Version 2.2 OPERATION MANUAL
SHARP Pen Software Version 2.2 OPRATION MANUAL Contents Introduction...3 Starting and xiting the Software...4 Pen Software modes and how to start the modes...4 xiting the software...5 Layout of Basic Screen...6
More informationThis instruction manual may not be copied either in part or in its entirety without the prior permission of Minolta Co., Ltd Minolta Co., Ltd.
This instruction manual does not provide instructions for the basic operation of the personal computers, or the basic operation of Windows or Mac OS operating systems. Please refer to the manual that came
More informationFiery XF Server Option User's Manual. Fiery XF Server Option Supplement
Fiery XF Server Option User's Manual Fiery XF Server Option Supplement 3 Contents Security 4 Installing Fiery XF Client / Unidriver 4 Connections Using the Remote Desktop 5 Remote desktop connections
More informationCustomer Release Notes Fiery Q5000 for DocuColor igen3, version 2.0
Customer Release Notes Fiery Q5000 for DocuColor igen3, version 2.0 This document contains information about Fiery Q5000 for DocuColor igen3 server software version 2.0. Before using the Fiery Q5000 for
More informationKIP PrintNET. KIP PrintNET User Guide
KIP PrintNET User Guide Introduction KIP PrintNET is a full featured web based viewing, printing and print management app that utilizes standard web browsers to print to KIP systems via a corporate intranet
More informationUSER S MANUAL Software Usage Agreement Registered Trademarks Notes on this Manual Disclaimer
USER S MANUAL Software Usage Agreement Registered Trademarks Notes on this Manual Disclaimer 1 1.1 1.2 2 3 Introduction 2.1 2.2 Features System Requirements Installing Xyron Wishblade Software 3.1 3.2
More informationOperation Guide <Functions Edition> Click on the button to jump to the desired section.
Operation Guide Click on the button to jump to the desired section. Using the Scanner Function Sending Scanned Image Data to Your Computer Sending Scanned Image Data by Email Using
More informationRoland CutChoice. Ver. 1.1 USER S MANUAL. Thank the user very much for purchasing the Roland cutter.
Roland CutChoice Ver. 1.1 USER S MANUAL Thank the user very much for purchasing the Roland cutter. S To ensure correct and safe usage with a full understanding of this product s performance, please be
More informationCopyboard M-12 Series Software Operation Manual
Copyboard M-12 Series Software Operation Manual We greatly appreciate your purchase of this PLUS Corporation product. In order to take full advantage of the features of the software supplied with the M-12
More informationOperating Instructions
Providing presentation solutions V iewer Software Program Operating Instructions NIPPON AVIONICS CO., LTD. 1 This manual describes the functions and operations for conducting presentations using ip Viewer.
More informationA warning provides additional information which, if ignored, may result in a risk of personal injury.
About This Manual Terms in this document The following terms are used in this manual. Indicates important information on operations. Make sure to read sections with this mark. Indicates additional information
More informationOperating Instructions
Operating Instructions For Digital Camera PC Connection QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. VQT1H07 Connection with the
More informationVersion: 01P02B. U3 Map Maker Operational Guide
Contents 1. Map Maker Software Overview... 4 1.1 Features... 4 1.2 Remarks... 4 1.3 Supported Devices... 4 2. Installing U3 Map Maker... 5 2.1 System Requirements... 5 2.2 Map Maker Installation... 5 3.
More informationApplicable Printer models 9150/9150R 7150/7150R
Applicable Printer models 9150/9150R 7150/7150R About This Guide Preface "RISO Mailing Log Viewer" is the dedicated application software for using the Wrapping Envelope Finisher (Mail maker) connected
More informationPC & Web Print Solutions 2.0
PC & Web Print Solutions 2.0 KIP System K Software Suite provides an enhanced user experience and exceptional productivity for the seamless control of colour and b&w print demands. Features include: Touchscreen
More informationSystem Settings Guide
MODEL: MX-5500N MX-6200N MX-7000N System Settings Guide Table of Contents About This Manual........................... 4 Manuals Provided with the Machine............ 5 1 SYSTEM SETTINGS System Settings.............................
More informationKIP AutoCAD R.14 ADI Driver v Overview and Features
KIP AutoCAD R.14 ADI Driver v. 1.00 1. Overview and Features The KIP AutoCAD R.14 ADI Driver has been designed to quickly and effectively plot to your KIP directly from the AutoCAD interface under Windows
More informationSoftware Guide. MF3200 Series TOP. Introduction. Printing. Scanning a Document. PC Faxing. Troubleshooting. Appendix
Software Guide MF00 Series Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. How to Use This Guide Manuals for
More informationAmbush Client Software User Guide For use with the full Range of Ambush DVRs Version 1.2
Ambush Client Software User Guide For use with the full Range of Ambush DVRs Version 1.2 Overview This user guide will take you through the process of obtaining and archiving footage from the Ambush Technologies
More informationAutoCAD HDI Printer Drivers. User Manual
AutoCAD HDI Printer Drivers User Manual Océ-Technologies B.V. Copyright Océ-Technologies B.V. Venlo, The Netherlands 2004 All rights reserved. No part of this work may be reproduced, copied, adapted, or
More informationLegal Notes. Regarding Trademarks. Models supported by the GX printer driver KYOCERA Document Solutions Inc.
Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from
More informationHeidelberg Pattern Generator SOP
Heidelberg Pattern Generator SOP Page 1 of 15 Heidelberg Pattern Generator SOP 1. Scope 1.1 This document provides the operating procedures for the Heidelberg Pattern Generator with Version 3.12.5 software.
More informationPerformer to DP2 Hot Folder Reference Manual Rev There is only one file involved with installing the Performer to DP2 Hot Folder.
Performer to DP2 Hot Folder Reference Manual Rev. 07.11.05 Install Files: There is only one file involved with installing the Performer to DP2 Hot Folder. The installer file is named PP2DP2_1.x.x.EXE.
More informationCMS User's Manual. Version 1.9
CMS User's Manual Version 1.9 Introduction 0 Introduction [ Principal function ] This CMS Interlocked with megapixel camera. This CMS supports easy connection and registration of the site(camera) This
More informationContents Contents. Chapter 1. Program Installation. Chapter 2. For the start of CMS. Chapter 3. Monitoring. Chapter 4. E-Map Mode
CMS User's Manual Contents 0 Contents Chapter 1. Program Installation 1.1 PC specifications 1.2 Program Installation Chapter 2. For the start of CMS 2.1 Site Registration Setup (Network Camera Registration)
More informationKYOCERA Net Viewer User Guide
KYOCERA Net Viewer User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable
More informationVizit Pro User Manual
Vizit Pro User Manual 1 Table of Contents Vizit Pro User Manual... 1 Using Vizit Pro... 3 The Vizit Pro User Interface... 3 Toolbars... 4 File Tab Toolbar... 4 Edit Tab Toolbar... 5 Annotations Tab Toolbar...
More informationSHARP UD2 Operation Manual
SHARP UD2 Operation Manual Ver. 2.00 Please note This manual explains how to install the SHARP UD2 and configure the unique function of the SHARP UD2. Please confirm the operation guide of each printer
More informationDocument Centre 286/236 Series PostScript User Guide
Document Centre 286/236 Series PostScript User Guide The AppleTalk protocols and computer programs are licenced from Apple Computer, Inc. AppleTalk, EtherTalk, Apple and Macintosh are trademarks of Apple
More informationHP Instant Printing Pro 2.0
HP Instant Printing Pro 2.0 Frequently Asked Questions Publication Date: July 2013 Edition: 1 2013 Hewlett-Packard Development Company, L.P. Legal notices The information contained in this document is
More informationCopyright Notice. Trademarks
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
More information1 ZoomBrowser EX Software User Guide 5.0
1 ZoomBrowser EX Software User Guide 5.0 Table of Contents (1/2) Chapter 1 Chapter 2 Chapter 3 What is ZoomBrowser EX? What Can ZoomBrowser EX Do?... 4 Guide to the ZoomBrowser EX Windows... 5 Task Buttons
More informationRelease Notes Fiery E C-KM Color Server version 1.1
Release Notes Fiery E 10 50-45C-KM Color Server version 1.1 This document contains information about the Fiery E 10 50-45C-KM Color Server, version 1.1. Before using the Fiery E 10 50-45C-KM Color Server,
More informationLabel Printing Software BA-300 Version 1.00
Label Printing Software BA-300 Version 1.00 EN For Windows User s Guide What you can do with the BA-300 Application Using the BA-300 Application Troubleshooting Be sure to keep all user documentation handy
More informationPAPERLESS RECORDER TR30 SERIES VIEWER SOFTWARE Model: TRViewer USERS MANUAL
PAPERLESS RECORDER TR30 SERIES VIEWER SOFTWARE Model: TRViewer USERS MANUAL Contents 1. INTRODUCTION...3 1.1 CORRESPONDING VERSION...3 2. INSTALLATION...4 2.1 HOW TO INSTALL TRViewer...4 2.2 HOW TO UNINSTALL
More informationCustomer Release Notes DocuColor Server, system software version 1.0 for Xerox digital copier printers
Customer Release Notes DocuColor Server, system software version 1.0 for Xerox digital copier printers These notes contain information about the DocuColor Server that was not available when the customer
More informationKyocera Extended Driver. User Guide
Kyocera Extended Driver User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We
More informationLaser Engraving Using Base and Mass Production Modules
ARPATHIA GRAPHIC INTERFACE Users Reference Guide Laser Engraving Using Base and Mass Production Modules 1 Table of Contents Page CGI Modules Carpathia Installation Carpathia Document Writer installation
More informationRenameMan User Guide. ExtraBit Software
RenameMan User Guide ExtraBit Software http://www.extrabit.com Version 3.1 August, 2005 Contents Introduction... 5 What does RenameMan do?... 5 Features... 5 Quick tour of RenameMan... 5 Getting started...
More informationRoland ColorChoice for PC-12
Roland ColorChoice for PC-12 Ver. 4.2 USER S MANUAL Thank you very much for purchasing the Roland printer. To ensure correct and safe usage with a full understanding of this product s performance, please
More informationVideo Management Software
Video Management Software User Manual Web: europesecurity.eu Mail: info@europesecurity.eu Tel.: 0541 352 952 User s Manual 2 Contents CHAPTER : XMS CENTRAL USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3
More informationCanon ImageRUNNER Advance: Printer Driver Settings from PC
Canon ImageRUNNER Advance: Printer Driver Settings from PC Most of the functions for copying are also available at your computer in the print driver. To access the print driver when in a document: File
More informationTOSHIBA GA Printing from Mac OS
TOSHIBA GA-1211 Printing from Mac OS 2008 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45075930 24 October 2008 CONTENTS 3 CONTENTS
More information5.2. Click these tabs to jump to the Table of Contents, Index or start of each chapter.
5.2 Click these tabs to jump to the, or start of each chapter. Click this button to advance to the next page. Click this button to return to the previous page. (Since this is the starting page, the [Back]
More informationDS40/DS80. March 18, 2010 Ver.3.10
Printer Driver Instruction Manual ~For Windows Vista~ DS40/DS80 March 18, 2010 Ver.3.10 Concerning Copyright The copyrights for the DS40/DS80 Printer Driver Instruction Manual, the DS40/DS80 Printer Driver
More informationTM Printer Service and Support Utility for Windows Version 2.xx User s Manual (English)
TM Printer Service and Support Utility for Windows Version 2.xx User s Manual (English) Rev. B Table of Contents Introduction...1 Purpose of This Manual and Target Users... 1 Composition of This Manual...
More informationOperating Instructions
Operating Instructions For Digital Camera PC Connection QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license. Connection with the PC Offers
More informationTPEditor User Manual
Table of Contents TPEditor User Manual Chapter 1 TPEditor Operation... 1-1 1-1 Recommended System Requirements... 1-1 1-2 TPEditor Software Installation... 1-1 1-3 Basic Introduction... 1-6 1-4 Skills
More information