Introduction to 3D Printing
|
|
- Lenard Morris
- 6 years ago
- Views:
Transcription
1 Introduction to 3D Printing How Do 3D Printers Work? 2 The Parts of a 3D Printer 2 Find and Download an Object from Thingiverse 3 What is Thingiverse? 3 Finding Files to Download 3 Selecting a File to Print Will My Object Print Successfully? 5 Create a Thingiverse Account 6 Thingiverse and Copyright 7 Using MakerBot Desktop 8 Adjust the Device Settings 8 Open a File 9 Common Warning Messages 9 Moving, Rotating and Resizing 10 Move 11 Rotate 11 Resize 12 Settings Rafts and Supports 13 Estimated Print Time 14 Save the File 14 1 May 2015
2 How Do 3D Printers Work? 3D printers work using additive technology. This means that to create an object, the 3D printer lays down layer after layer of material, until the object is complete. This way of printing means that some 3D object designs print better than others, depending on what model of 3D printer is being used. Here at the Whitby Public Library, our 3D printer is a MakerBot Replicator 2. The Replicator 2 prints objects using PLA filament. PLA is a biodegradable, corn-based plastic, so it is relatively environmentally friendly and doesn t extra considerations (such as adequate ventilation) when printing. The Parts of a 3D Printer 2 May 2015
3 Find and Download an Object from Thingiverse What is Thingiverse? Thingiverse is a website dedicated to discovering, making, and sharing 3D printable objects. You can access Thingiverse from any computer with an Internet connection by visiting Finding Files to Download You can browse the objects available on Thingiverse by clicking on Explore at the top of the page. Select Categories from the dropdown menu that appears to view objects by genre. 3 May 2015
4 Once you select a category, the objects will display in chronological order, with the most recently uploaded objects appearing first. You can use the search filters in the top left corner of the page to view the search results in order of popularity, most makes, and others if you would prefer. Alternatively, if you are looking for a specific type of object, you can use the search bar in the top right corner of the page to search for an object by keyword. 4 May 2015
5 Selecting a File to Print Will My Object Print Successfully? The Thingiverse is an open-sharing website. This means that anyone with a Thingiverse account can upload an object to Thingiverse. This results in many files to choose from, but also means that the quality of the objects is sometimes unreliable. There are a few things you can look for to help you decide if an object will print successfully: 1. View a 3D image of the object using the Thingiview. This will allow you to see the object from all angles. Keep in mind that our model of 3D printer doesn t necessarily do well with very thin parts of objects. The Thingiview will let you spot any parts of the object that may be too small to print successfully. 2. Read the Instructions for the object, if any. The instructions are created by the person that uploaded the object to the Thingiverse, so sometimes there aren t any, and sometimes they are not very descriptive. However, sometimes they 5 May 2015
6 provide crucial information about piecing together multiple parts, or scaling for different models of 3D printers. 3. View the Thing Files to see what type of file the object was uploaded as. The Library can only print.stl files, so the object must be this file type if you wish to print it at the Library. 4. Read the Comments from other users. Often, if many other users have downloaded and printed the object there will likely be comments about how successfully or unsuccessfully the object printed. 5. Use the Made tab to view photographs of the object as printed by other Thingiverse users. Create a Thingiverse Account You don t need to have an account to use and download objects from Thingiverse, but if you sign up for a free account, you ll be able to like and collect your favourite 3D objects to remember for later. With an account, you can also upload your own 3D designs, comment on others designs, or post pictures of the objects you have 3D printed. To sign up for an account, click on Sign In/Join in the top right corner of the screen. Click on Create an Account to visit the page where you can sign up for your own account. You will need to provide your name, address and a password as prompted, as well as agree to the Terms of Use before you can successfully register for a Thingiverse account. 6 May 2015
7 Thingiverse and Copyright The objects and designs that are uploaded to are protected under Creative Commons copyright licenses. Creative Commons is a non-profit organization that provides free, easy to use copyright licenses. This provides a simple, standardized way to give the public permission to share and use a person s creative work on conditions that the creator gets to choose. When you choose to download and print something from Thingiverse it is your responsibility to be aware of the copyright and licensing restrictions. You can find this information in the bottom right corner of the page for every object. There are several variations of Creative Commons copyright licenses used on Thingiverse. Each license allows for different levels of copyright restrictions. Some examples of Creative Commons licenses include: Attribution: This license lets other distribute, remix, tweak and build upon our work, even commercially, as long as they credit you for the original creation. Attribution Share-Alike: This license lets others remix, tweak, and build upon your work even for commercial purposes, as long as they credit you and license their new creations under the identical terms. Attribution NoDerivs: This license allows for redistribution, commercial and non-commercial, as long as it is pass along unchanged and in whole, with credit to you. 7 May 2015
8 Using MakerBot Desktop MakerBot Desktop is the application that sends 3D print files to the 3D printer. This software also allows you to see the specific measurements of the object, resize the object, and get an estimated print time. MakerBot Desktop is a free application that you can download to your home computer from The Prepare screen is the part of the program that will allow you to view and adjust your 3D object. Adjust the Device Settings Part of what the MakerBot Desktop application can do is give you an estimated print time for your object. However, this software is compatible with all MakerBot models. To get an accurate estimated print time for the Library s specific model of 3D printer, open the Devices menu and then click on Select Type of Device. Select the Replicator 2, as this is the model of 3D printer the Library currently uses. This will ensure you have an accurate estimated print time. 8 May 2015
9 Open a File To view your object in the MakerBot Desktop application, open the File menu and select Open. From here, you can browse your computer for the file you wish to open. Common Warning Messages There are 2 warning prompts that are not unusual to see when opening a file in MakerBot Desktop. The first one occurs when the object loads into the MakerBot Desktop software and is not touching the build platform. You will see the following prompt: When this message appears, always select Move to platform. The second common warning prompt occurs when the object is too large for build space, or loads outside the build space. You will see the following prompt: When this message appears, you will usually need to select Scale to Fit. This will ensure that the object fits inside the build space. You can make adjustments as necessary after this. 9 May 2015
10 Moving, Rotating and Resizing The 4 squares on the right side of the window allow you to move, rotate and resize the object. Click on the square once to activate that tool. Click a second time to open a small window with more specific options for that tool. 10 May 2015
11 Move This tool allows you to move the object around on the print bed. This can be helpful if you need to adjust the placement of the object on the print bed to optimize space and size. d Rotate This tool allows you to rotate the object on all axes. 3D objects print best on their flattest edge, with as little overhangs as possible. The rotate tool allows you to select which edge or face becomes the object s bottom when printing. 11 May 2015
12 Resize This tool allows you to adjust the size of the object to be larger or smaller. This can help the object fit onto the print bed, be the specific dimensions you want, or fit within the Library s 3 hour print limit. 12 May 2015
13 Settings Rafts and Supports 3D objects will print best if rafts and supports are turned on. These tools help ensure that your object prints as well as possible. The raft ensures a smooth, flat base for the object to print on, and allows for easier removal with the build platform. The supports provide a base for all overhanging parts to print on this prevents these parts of the object from drooping because they have no base to print on. It is okay to always leave supports on, as the MakerBot will not print supports if the object does not need them. 13 May 2015
14 Estimated Print Time To get an estimated print time for your object, click on Export Print File. This will provided an estimated print time, as well as confirming that Rafts and Supports are on. After getting the estimated print time, it is important to hit Cancel. Exporting the print file will result in a file format incompatible with the method the Library uses to send print jobs to the 3D printer. Save the File Once you have adjusted your object as wanted, or as needed, you must Save As the file. Select Save As from the File Menu. You must change the File Type to Binary STL. ASCII STL is also acceptable, but Binary files are smaller. This will ensure that the Library is able to print your 3D object. 14 May 2015
Section 1- Sketchup (or other 3D modeler): How do render a file that can be printed
Using the 3D Printer (Makerbot) - BETA Contents: Section 1 Sketchup: How do draw a file that can be 3-D printed Section 2 Sketchup: Exporting STL Section 3 MakerWare: Preparing your file Section 4 Printing!
More information3D Printing Getting Started!
ARCHITECTURE & LANDSCAPE ARCHITECTURE 3D Printing Getting Started! White filament is free to students for academic use. Where do I buy filament? NORTH DAKOTA STATE UNIVERSITY www.makerbot.com/store www.ultimachine.com/pla
More informationElmhurst Public Library Create, Make, and Build
3D PRINTING BASICS WHAT IS 3D PRINTING? A 3D printer works essentially like a traditional printer except it prints in plastic layers to make 3-dimensional designs. 3D printers can print in several different
More informationCura: Basic 3D Printing Guide
Cura: Basic 3D Printing Guide Introduction Cura is an open-source slicer, developed by Ultimaker, for use with FFF (Fused Filament Fabrication) printers such as the PrintrBot Play. A slicer analyzes your
More information3D Printing Getting Started!
ARCHITECTURE & LANDSCAPE ARCHITECTURE 3D Printing Getting Started! White filament is free to students for academic use. Where do I buy filament? NORTH DAKOTA STATE UNIVERSITY www.makerbot.com/store www.ultimachine.com/pla
More informationAdditive Manufacturing (AM) in a Nutshell Spring 2016 Nick Meisel
Additive Manufacturing (AM) in a Nutshell Spring 2016 Nick Meisel Additive vs. Subtractive Manufacturing Traditional subtractive manufacturing involves the removal of unwanted material from a block of
More informationA new clients guide to: Activating a new Studio 3.0 Account Creating a Photo Album Starting a Project Submitting a Project Publishing Tips
Getting Started With Heritage Makers A Guide to the Heritage Studio 3.0 Drag and Drop Publishing System presented by Heritage Makers A new clients guide to: Activating a new Studio 3.0 Account Creating
More informationHow to Convert a Microsoft Word Document to PDF Format
How to Convert a Microsoft Word Document to PDF Format Sharing a file in PDF format allows people to view the document regardless of what word processor they are using. More importantly, it prevents formatting
More informationMAKERBOT For use with MakerBot Replicator Desktop 3D Printer (Fifth Generation Model)
MAKERBOT For use with MakerBot Replicator Desktop 3D Printer (Fifth Generation Model) YALE CENTER FOR ENGINEERING INNOVATION AND DESIGN Table of Contents p. 3-5... Using the MakerBot Desktop p. 6... Using
More informationCura (Documentation for version )
Cura (Documentation for version 15.04.06) Getting Started Installation To start the installation of Cura, download it first. After downloading, open the installer and run the installation wizard to complete
More informationResource upload / download guide
The Higher Education Academy / JISC Open Educational Resources Programme Resource upload / download guide Authors: Liam Comerford, John Connor Date: 12/04/2010 Version: 2 This guide helps talk you through
More informationLearning and Development. UWE Staff Profiles (USP) User Guide
Learning and Development UWE Staff Profiles (USP) User Guide About this training manual This manual is yours to keep and is intended as a guide to be used during the training course and as a reference
More information3D Printing Introduction Workshop Plan. Introductions. Workshop Outline. The CD
3D Printing Introduction Workshop Plan This workshop is 2 hours long and limited to 8 participants. Each participant is provided with a laptop loaded with Blender, Sketchup, and Sculptris as well as Makerware.
More informationBFB Axon software manual
Contents Install BFB Axon on your computer from the website for the latest version: www.bitsfrombytes.com > Downloads> Software. (Or from the SD card if supplied). If you are using Vista or windows 7,
More information123D Catch: 3D Scanning
123D Catch: 3D Scanning Stages Synopsis: 3D scanning and printing is becoming much more accessible and affordable to artists and designers alike. Today s workshop will demonstrate some of the free and
More informationBIZPRAC 12 GUIDE RE-INSTALLATION
BIZPRAC 12 GUIDE RE-INSTALLATION BEFORE YOU START 1. Please ensure that your computer/s meets the Minimum System Requirements: http://www.bizprac.com/wp-content/uploads/bizprac- Minimum-System-Requirements.pdf.
More informationPrinting Tips Revised: 1/5/18
Printing Tips By: Mike Angstadt This document contains tips on how to print from the PACs. Printing Email Attachments Many email services allow you to preview email attachments. This often misleads patrons
More information3D Printing 101 THE BASICS BASICS OF THE PRINTER
3D Printing 101 Are you completely new to 3D printing? Don t worry, we ll help you get started. Whether you are in education, business, or interested for personal use, here is some background to help you
More informationJoining Flickr. Each of the above steps is detailed below: Step 1: Sign up for a Yahoo! account (skip this step if you already have one)
Joining Flickr Flickr is a photo sharing website. The photography group at the Library has organized a group for members to post and share their photos. Here s how to join: 1. Sign up for a Yahoo! account
More informationEpilog Laser Cutter Instructions (Only the Essentials)
Epilog Laser Cutter Instructions (Only the Essentials) How to export a file for SKETCHUP put it on the server, open it in Illustrator, and Prepare it for the Epilog Laser Cutter 1. In Sketchup: Draw a
More informationINVESTIGATE: PARAMETRIC AND CUSTOMIZABLE MODELS
LEARNING OBJECTIVES General Confidence writing basic code with simple parameters Understanding measurement and dimensions 3D Design (Parametric Modeling) Modifying parameters Basic OpenSCAD code Translation
More informationDremel Idea Builder 3D40. Various infill options are available from Simplify 3D software. Varies dependent on the infill and size of your object.
Guide for Dremel Printing General information The Dremel Idea Builder 3D printer extrudes PLA plastic along a tool path to create layers much like our higher end Dimension. The Dremel however does not
More informationCertification Guide. Brownsburg Public Library
Certification Guide Brownsburg Public Library 1 st Maker Space, LLC and Brownsburg Public Library have partnered to increase understanding and access to 3D printing and design technology. Brownsburg Public
More informationMAIL MERGE MARKETING WITH CARDEX
This procedure contains several steps to accomplish exporting the Cardex records to a text file and merging the exported Cardex data to Microsoft Word for address labels. Exporting the Cardex records to
More informationOn the Web sun.com/aboutsun/comm_invest STAROFFICE 8 DRAW
STAROFFICE 8 DRAW Graphics They say a picture is worth a thousand words. Pictures are often used along with our words for good reason. They help communicate our thoughts. They give extra information that
More informationideamaker Manual
ideamaker Manual Using ideamaker... 2 Basic information... 2 What is ideamaker?... 2 Where to download ideamaker?... 2 Install ideamaker... 3 Let s Print!... 6 How to use ideamaker?... 23 Interface...
More informationWe have two types of plastic printer (Makerbot and Up) and one powder printer at School of Architecture.
3D printers are rapid prototyping tools which make solid, threedimensional objects out of melted plastic filament. Digital models are translated into instructions for the 3D printer (3d models are converted
More informationUsing Picasa Web Albums North Canton City Schools - Eric Curts
Using Picasa Web Albums North Canton City Schools - Eric Curts Table of Contents: What is Picasa Web Albums? How to upload an image to Picasa web Albums How to manage an image you have added How to edit
More informationStep 1: Adding Darwin to your computer
Step 1: Adding Darwin to your computer You MUST be on GoucherWIFI. If you receive any network connection problems at any point, double-check your WIFI connection. Remove/Move GoucherGuest and GoucherMultimedia
More informationSupport creation & Verification. Automatic region creation 13,0600,1489,1616(SP6)
Support creation & Verification 13,0600,1489,1616(SP6) In this exercise, we will learn the foundation of. Region creation is required to identify those regions where a support is needed to the tray. In
More informationTechnical Support: CUBE USER MANUAL
CUBE THE DESKTOP 3D PRINTER USER MANUAL 2012-12-05 1 Contents 1 Installing software...3 1.1 Installing Python... 3 1.2 Installing ReplicatorG... 5 2 Pre-print checks...9 2.1 Power up...9 2.2 Connect to
More information3D printing Workshop Breakdown
3D printing Workshop Breakdown Opening Lecture/Remarks (20-30 Minutes) -Introduction to 3D modeling software Overview of what 3D modeling software is Introduction to 123D Design Introduction to 123D Design
More information10/21/ D Printing. In the Beginning, Manufacturing was Subtractive. Examples of 3D Printing. Today s 3D Printing Process.
3D Printing 1 In the Beginning, Manufacturing was Subtractive 2 Mike Bailey mjb@cs.oregonstate.edu This work is licensed under a Creative Commons Attribution NonCommercial NoDerivatives 4.0 International
More information3D Printing. Mike Bailey
3D Printing 1 Mike Bailey mjb@cs.oregonstate.edu This work is licensed under a Creative Commons Attribution NonCommercial NoDerivatives 4.0 International License 3dPrinting.pptx In the Beginning, Manufacturing
More information10/21/ D Printing. In the Beginning, Manufacturing was Subtractive. Mike Bailey.
3D Printing 1 This work is licensed under a Creative Commons Attribution NonCommercial NoDerivatives 4.0 International License Mike Bailey mjb@cs.oregonstate.edu 3dPrinting.pptx In the Beginning, Manufacturing
More information10/21/ D Printing. In the Beginning, Manufacturing was Subtractive. Examples of 3D Printing. Today s 3D Printing Process
D Printing 1 In the Beginning, Manufacturing was Subtractive Mike Bailey mjb@cs.oregonstate.edu This work is licensed under a Creative Commons Attribution NonCommercial NoDerivatives 4.0 International
More informationPosting Photos of CORE trips on the CORE Website 10 Aug 2017
Posting Photos of CORE trips on the CORE Website 10 Aug 2017 There are several ways that you can upload photos to the CORE Fotki albums, both from the perspective of how you organize your photos on your
More informationWindows Movie Maker / Microsoft Photo Story Digital Video
Windows Movie Maker / Microsoft Photo Story Digital Video http://intranet/technology/index.html TRC HELP DESK X5092 April 2006 Photo Story and Movie Maker Microsoft Photo Story 3 allows you to create fantastic
More informationGuide: 3D Printing Software: UP, Makerbot P 1
Guide: 3D Printing Software: UP, Makerbot 02-09-2015 P 1 Disclaimer P 2 We can t guarantee your model will successfully print as there are many factors which can affect it. The guideline will help you
More informationhamster.ca Web Site User Guide 2018 See who we are
hamster.ca Web Site User Guide 2018 See who we are Table of Contents Table of Contents...2 First Welcome Window...3 Managing sessions...3 Lost your Password?...3 Power Search tools...4 Ink & Toner Reference
More informationChapter 25-3D Printing Tools
3D printing (also called rapid prototyping) has become a hot topic in recent years. They are great tools to bring your 3D designs into the real world and Blender can be a great tool to use to design those
More informationInstalling the application involves several steps. Note that you must install QuickBooks on your computer prior to installing this application.
CCRQLABEL OVERVIEW This is an overview (summary) of the CCRQLabel 4.x label printing product. Full documentation is under development INSTALLING CCRQLABEL This document provides a quick review of how to
More information74 PROJECT: PARAMETRIC MODELING WITH OPENSCAD MAKERBOT IN THE CLASSROOM
PROJECT: Parametric Modeling with OpenSCAD 74 PROJECT: PARAMETRIC MODELING WITH OPENSCAD MAKERBOT IN THE CLASSROOM LEARN TO CODE FOR 3D PRINTING: MAKE A NAMETAG BACKGROUND In this project, students will
More informationQuick Start Guide - Contents. Opening Word Locating Big Lottery Fund Templates The Word 2013 Screen... 3
Quick Start Guide - Contents Opening Word... 1 Locating Big Lottery Fund Templates... 2 The Word 2013 Screen... 3 Things You Might Be Looking For... 4 What s New On The Ribbon... 5 The Quick Access Toolbar...
More informationExternal Application Instructions
External Application Instructions Hello and thank you for your interest in PeaceHealth. The instructions below are intended to assist you in submitting your application for employment with PeaceHealth
More informationWhy Sketchup? Underneath is a screenshot of a model I wanted to print.
Means: (Steps) 1. Tighten up or adapt design as needed. No Open edges or extra lines or shapes. 2. Check all Faces Use the Style tool to color the backside of planes to be sure that they are facing correctly.
More informationForms/Distribution Acrobat X Professional. Using the Forms Wizard
Forms/Distribution Acrobat X Professional Acrobat is becoming a standard tool for people and businesses to use in order to replicate forms and have them available electronically. If a form is converted
More informationImporting in Offertory Donations from Spreadsheets into Connect Now
Importing in Offertory Donations from Spreadsheets into Connect Now When you have an excel spreadsheet that has donations in it, if you have a key identifier, such as an envelope number, then the spreadsheet
More informationUSER GUIDE for Salesforce
for Salesforce USER GUIDE Contents 3 Introduction to Backupify 5 Quick-start guide 6 Administration 6 Logging in 6 Administrative dashboard 7 General settings 8 Account settings 9 Add services 9 Contact
More informationUniversity of Pittsburgh Communications Services. Basic Training Manual Drupal 7
University of Pittsburgh Communications Services Basic Training Manual www.shrs.pitt.edu Drupal 7 Table of Contents Users... 3 Log In... 3 Log Out... 3 What is a Content Management System?... 4 What are
More informationPortable Qi Charger. Created by Ruiz Brothers. Last updated on :20:38 AM UTC
Portable Qi Charger Created by Ruiz Brothers Last updated on 2017-12-05 01:20:38 AM UTC Guide Contents Guide Contents Overview Prerequisite Guides Parts, Tool & Supplies Universal Qi Wireless Charging
More informationPrezi is a wonderful presentation tool to help make classroom or online instruction easy and
Prezi is a wonderful presentation tool to help make classroom or online instruction easy and engaging. The following 5 steps will help you learn the basics of creating a Prezi presentation. This presentation
More informationCura - DUET Dual Extrusion Setup
SeeMeCNC Guides Written By: SeeMeCNC 2018 seemecnc.dozuki.com/ Page 1 of 15 INTRODUCTION Please note that dual extrusion is for advanced users. You should have some advanced knowledge on some G-Code and
More informationWeb Site Documentation Eugene School District 4J
Eugene School District 4J Using this Documentation Revision 1.3 1. Instruction step-by-step. The left column contains the simple how-to steps. Over here on the right is the color commentary offered to
More information3D PRINTING DMAF LAB.
3D PRINTING DMAF LAB www.bestppt.com 3D PRINTING Introduction Machine features Cost Booking process Considerations (Is my model print-ready?) Fixing your 3D model 2 DMaF 3D Printers 3D Extruders (FDM)
More informationEKTRON 101: THE BASICS
EKTRON 101: THE BASICS Table of Contents INTRODUCTION... 2 TERMINOLOGY... 2 WHY DO SOME PAGES LOOK DIFFERENT THAN OTHERS?... 5 LOGGING IN... 8 Choosing an edit mode... 10 Edit in context mode (easy editing)...
More informationNetwork Rail Brand Hub USER GUIDE
Network Rail Brand Hub USER GUIDE The Brand Hub Using keywords, visual thumbnails and a more upto-date online interface, the new Brand Hub will make searching, browsing and downloading images, templates
More informationTips for modeling in Sketchup
Tips for modeling in Sketchup Make your model Solid in Sketchup to be 3D Printable Models must be Solid to be 3D printable. This is by far the most common problem beginners have when modeling for 3D printing.
More informationDremel Digilab 3D Slicer Software
Dremel Digilab 3D Slicer Software Dremel Digilab 3D Slicer prepares your model for 3D printing. For novices, it makes it easy to get great results. For experts, there are over 200 settings to adjust to
More informationTroop Smart Cookies Training: Before the Sale. Setting Up Your Troop
Setting Up Your Troop Troop Smart Cookies Training: Before the Sale Welcome to the troop training for Smart Cookies. This series will walk you through everything you need to know for a successful 2018
More informationFor Volunteers An Elvanto Guide
For Volunteers An Elvanto Guide www.elvanto.com Volunteers are what keep churches running! This guide is for volunteers who use Elvanto. If you re in charge of volunteers, why not check out our Volunteer
More informationInstructions for Casual and Relief Staff
Instructions for Casual and Relief Staff Schools W: www.staffsync.nz E: support@staffsync.nz Ph: 0800 878623 Logging In Enter the email address and password you normally use with StaffSync. If using your
More informationGetting Started with XMF Remote
Getting Started with XMF Remote Remote R9.5 Contents Introduction......................................................... 5 How to Login........................................................ 6 The
More informationNote: As of right now, Zotero is a program specifically for Mozilla Firefox. It is NOT available in any other browser.
This guide will teach you how to add information to your library from the web, how to export bibliography links to your Microsoft Word documents, and how to scan information from a physical text into your
More informationSteps to Print (without supports) This will take you from Meshmixer to the PSU PrintDepot
Steps to Print (without supports) This will take you from Meshmixer to the PSU PrintDepot Read this first to understand some of the dilemmas a model can have and ways to avoid printing problems: http://www.3dshook.com/2016/05/how-to-optimize-a-3d-model-for-3dprinting/#normal
More informationCreate a 3D Printing Project. New Project-set part on Tray 13,0600,1489,1616(SP6)
Create a 3D Printing Project New Project-set part on Tray 13,0600,1489,1616(SP6) In this exercise, we will learn to create New Project-set part on Tray. To create a new project and set the tray we need
More informationDP200/DP201/DP102 Series. Slicer Program Manual
DP200/DP201/DP102 Series Slicer Program Manual Read the User Manual before operating the product, and keep the manual at a convenient place near the product. Contents 1. Slicer Program Manual-----------------------------------------------------------------------------------------------------3
More informationCorner Bakery Web Ordering Guide
Prepared By Document Owner(s) Warren Kwan Project/Organization Role IT Manager Website Guide Manual Version Control Version Date Author Change Description TABLE OF CONTENTS 1 INTRODUCTION... 3 1.1 Access
More informationTopic 2: Assignment Details > Using Functions Inside the Turnitin Paper Assignment Inbox
Topic 2: Assignment Details > Using Functions Inside the Turnitin Paper Assignment Inbox The Turnitin Inbox is the central location that contains student paper submissions for a Turnitin Paper Assignment.
More informationCreating an with Constant Contact. A step-by-step guide
Creating an Email with Constant Contact A step-by-step guide About this Manual Once your Constant Contact account is established, use this manual as a guide to help you create your email campaign Here
More informationIntroduction to Podcasting
2011 Introduction to Podcasting Part 2: Recording Your Podcast Adam Read University College Plymouth St Mark & St John 10/Jan/2011 About this guide This is part 2 in the elearning essentials: Introduction
More informationBanner Gets a Facelift Coming this October
Banner Gets a Facelift Coming this October 1 Benefits: No more Banner-specific password. Just log in with your regular credentials (NetID and password same that you use to log onto your computer, into
More informationGuide to Completing Your Senior English and Government Portfolios
Sheridan High School s Guide to Completing Your Senior English and Government Portfolios Written by: Dave Burkhart Updated: August 24, 2014 2 Clicking on a topic or a page number will automatically take
More informationThe Kindred Directory allows you to search for employees and locations across all of our lines of business.
Release 2.0 July 2017 1 GETTING STARTED The Kindred Directory allows you to search for employees and locations across all of our lines of business. The Kindred Directory can be accessed in a variety of
More informationPrint Manager Plus 2010 Workgroup Print Tracking and Control
INTRODUCTION: This is intended to assist in the initial installation or evaluation of Print Manager Plus 2010 Workgroup Edition. This will guide you through tracking your printing whether your workgroup
More informationIntroduction to Kaltura
Introduction to Kaltura The Kaltura media content management system allows users to record, stream, and manage multimedia files. This industry-leading enterprise system offers many robust tools. This guide
More informationCreating a Website with Publisher 2016
Creating a Website with Publisher 2016 Getting Started University Information Technology Services Learning Technologies, Training & Audiovisual Outreach Copyright 2017 KSU Division of University Information
More information127 Church Street, New Haven, CT O: (203) E: GlobalSearch ECM User Guide
127 Church Street, New Haven, CT 06510 O: (203) 789-0889 E: sales@square-9.com www.square-9.com GlobalSearch Table of Contents GlobalSearch ECM... 3 GlobalSearch Security... 3 GlobalSearch Licensing Model...
More informationCreating a Google Scholar Account and using BibTeX to import to Faculty180-1
Creating a Google Scholar Account and using BibTeX to import to Faculty180-1 PART 1: Creating a Google Scholar Account Credit: http://blog.impactstory.org/impact-challenge-day-3-google-scholar/ (accessed
More informationHeuristic Evaluation of Covalence
Heuristic Evaluation of Covalence Evaluator #A: Selina Her Evaluator #B: Ben-han Sung Evaluator #C: Giordano Jacuzzi 1. Problem Covalence is a concept-mapping tool that links images, text, and ideas to
More informationPrinting models using your 3D printer
Printing models using your 3D printer Use this 3D print preparation workspace to prepare your models for 3D printing on your 3D printer. 1.CHOOSE PRINTER Start here by choosing your 3D printer 2.CHOOSE
More informationRepetier-Host Documentation for use with Kora Pro 3D PC
Repetier-Host Documentation for use with Kora Pro 3D PC Installation Prerequisites Before you start with the installation, you should check if your computer meets the requirements. Currently available
More informationWebsite Updates Made Easy
Built by Packerland Websites, Managed by You You will learn: How to log into your website to make changes How to update the Home, About Us & other pages Quick tips for success How to add photos, links,
More informationGOOGLE APPS. GETTING STARTED Page 02 Prerequisites What You Will Learn. INTRODUCTION Page 03 What is Google? SETTING UP AN ACCOUNT Page 03 Gmail
GOOGLE APPS GETTING STARTED Page 02 Prerequisites What You Will Learn INTRODUCTION Page 03 What is Google? SETTING UP AN ACCOUNT Page 03 Gmail DRIVE Page 07 Uploading Files to Google Drive Sharing/Unsharing
More informationEagleView Android Application Guide
EagleView Android Application Guide 866-659-8439 www.eagleview.com Table of Contents Overview... 2 Download & Installation... 3 Installation... 3 Launching... 3 Sign-In Screen... 4 Settings....4 New Order...
More informationDeltaMaker 3D Printer Getting Started
DeltaMaker 3D Printer Getting Started Last Updated: December 2014 Table of Contents TABLE OF CONTENTS 2 WELCOME 3 SECTION 1: UNPACKING/SETUP 4 REMOVING THE PRINTER FROM THE BOX 4 INSTALLING THE FILAMENT
More informationThinkPrint a User Guide for Students. The Latest Print Management System
ThinkPrint a User Guide for Students The Latest Print Management System 1 ThinkPrint Agenda What is ThinkPrint for Students? Features of your ThinkPrint account How to print from a Student computer or
More informationUsing the wiki activity in Moodle
Using the wiki activity in Moodle Click on the link to the wiki activity in your Moodle course. Collaborative wikis The number of tabs that you will see depends upon the permissions in your particular
More informationUSER MANUAL. > analyze. reduce. recover
USER MANUAL > analyze > reduce > recover Table of Contents COPY AUDIT... 1 OVERVIEW... 1 IMPORTANT NOTES FOR PRINT AUDIT 4 CUSTOMERS... 1 COMMUNICATOR TECHNICAL NOTES... 2 COPY AUDIT SOFTWARE... 2 INSTALLING
More informationTABLE OF CONTENTS. Fish Data Submission FAQs and Trouble-shooting Guide January 2013
Fish Data Submission FAQs and Trouble-shooting Guide January 2013 TABLE OF CONTENTS How to make your first submission to our fish data submission sharepoint site... 2 How do I know that my data submission
More informationCMS (Content Managed System) Training Manual
CMS (Content Managed System) Training Manual 1 Contents Document History... 3 Introduction... 4 Login... 4 Control panel... 4 User manager... 5 Global Configuration... 7 Site Settings... 8 Metadata Settings...
More informationContent Author's Reference and Cookbook
Sitecore CMS 7.0 Content Author's Reference and Cookbook Rev. 130425 Sitecore CMS 7.0 Content Author's Reference and Cookbook A Conceptual Overview and Practical Guide to Using Sitecore Table of Contents
More informationPowerPoint 2002 Manual
PowerPoint 2002 Manual Internet and Technology Training Services Miami-Dade County Public Schools Contents How to Design Your Presentation...3 PowerPoint Templates...6 Formatting Your Slide Show...7 Creating
More informationAn Introduction to Box.com
An Introduction to Box.com Box is an online file sharing and cloud content management service and it provides features such as: Security controls Space Mobility Online collaboration Mobile access Version
More informationVersion June 2016
HOSTING GUIDE Version 3.2.3 June 2016 This guide is sold in conjunction with the VETtrak Hosting Serv ice and is current at the time of purchase. Later v ersions are av ailable for download from www.v
More informationCreating a VoiceThread
Creating a VoiceThread Creating a new VoiceThread You can begin creating a new VoiceThread from any VoiceThread page by clicking on the Create button at the top. If you are accessing VoiceThread through
More informationYearbook Edition Software
Yearbook Edition Software End User Guide Pixami, Inc. www.pixami.com Table of Contents 1 Introduction... 4 1.1 Configuration and Preparation... 4 1.2 Software System Requirements... 4 1.3 The Basic Steps...
More informationGuidelines for work on the Genebank KB site
Guidelines for work on the Genebank KB site (By Geert Claessens. For extra information email to geert.jef.claessens@gmail.com) These guidelines are written for users of the Crop Genebank Knowledge Base
More informationPART I. The Lay of the Land. CHAPTER 1: Exploring SharePoint Designer
PART I RI AL The Lay of the Land CO PY RI GH TE D MA TE CHAPTER 1: Exploring SharePoint Designer 1Exploring SharePoint Designer WHAT YOU WILL LEARN IN THIS CHAPTER How SharePoint Designer fits into Microsoft
More informationLogging Into Your Site
This training document is meant as a step-by-step guide to creating and delivering a UW-Madison site in the current UW-Madison theme. In this training class, you will learn how to log in to access your
More information