List of VT Host Interface Functions

Size: px
Start display at page:

Download "List of VT Host Interface Functions"

Transcription

1 List of VT Host Interface Functions 12-Jan-94 Introduction This section provides tables showing ANSI host interface control functions that should be supported by software terminal emulation. To simplify understanding the huge number of functions and corresponding rich interface, this section is divided into a number of largely independent subsections and tables which describe functionally related parts of the ANSI host interface. These subsections are: Code Extension Functions Control Coding Character Coding Graphic Character Sets Terminal Management Functions Character Cell Display Service Class Display Coordinate System and Addressing * Active Position and Cursor * Margins and Scrolling * Cursor Movement * Horizontal Tabulation * Page Size and Arrangement * Status Display * Right to Left Window Management Visual Attributes and Renditions Audible Indicator Mode States Editing Functions OLTP Features Saving and Restoring terminal State Keyboard Processing Functions Soft Key Mapping (UDK) Soft Fonts (DRCS) Printing Terminal Communication and Synchronization Text Locator Extension Session Management Extension Documented Exceptions Page 1

2 Code Extension Functions Control Coding CAN Cancel SUB Substitute ESC Escape DCS Device Control String CSI Control Sequence Introducer ST String Terminator OSC Operating System Command DECterm PM Privacy Message APC Application Program Command VT420 S7C1T Select 7-bit C1 Transmission S8C1T Select 8-bit C1 Transmission Character Coding Announce Subset of Code Extension Facilities VT320 LS0 Locking Shift Zero (SI) LS1 Locking Shift One (SO) LS2 Locking Shift Two LS3 Locking Shift Three LS1R Locking Shift One Right LS2R Locking Shift Two Right LS3R Locking Shift Three Right SS2 Single Shift Two SS3 Single Shift Three Graphic Character Sets SCS Select Character Set ASCII DEC Special Graphics (Line Drawing) DEC MCS ISO Latin-1 VT320 UPSS VT320 DEC Technical ISO Latin-2, Hebrew, Greek, Cyrillic, Turkish DECNRCM (National Replacement) Character Set Mode DECAUPSS Assign User-Preference Supplemental Set VT320 DECRQUPSS Request User-Preference Supplemental Set VT320 Page 2

3 Terminal Management Functions Identification, status, and Initialization DA1 Primary Device Attributes DA2 Secondary Device Attributes DECRPTUI Report Terminal Unit ID VT420 DSR Device Status Report DECID Identify Device DECTID Select Terminal ID DECSCL Select Conformance Level DECSR Secure Reset VT420 DECSRC Secure Reset Confirmation VT420 DECSTR Soft Terminal Reset DECSTUI Set Terminal Unit ID (Restricted) VT420 RIS Reset to Initial state Emulations DECPCTERM Enter/Exit PC Term Mode from DEC VT mode VT420PC DECTME Terminal Mode Emulation Set-Up DECSSL Select Set-Up Language DECCRTSM CRT Save Mode (not required) DECOSCNM Overscan Mode DECSRFR Select Refresh Rate DECLTOD Load Time of Day DECLBAN Load Banner Message Page 3

4 Display Coordinate System and Addressing Active Position And Cursor DECTCEM Text Cursor Enable Mode DECSCUSR Set Cursor Style Margins And Scrolling DECSTBM Set Top and Bottom Margin DECSLRM Set Left and Right Margin VT420 DECLRMM Left Right Margin Mode VT420 DECOM Origin Mode DECSCLM Scrolling Mode IND Index RI Reverse Index DECFI Forward Index VT420 DECBI Back Index VT420 DECSSCLS Set Scroll Speed Cursor Movement BS Backspace LF Line Feed VT Vertical Tab FF Form Feed CR Carriage Return NEL Next Line LNM Line Feed/New Line Mode CUU Cursor Up CUD Cursor Down CUF Cursor Forward CUB Cursor Backward CUP Cursor Position HVP Horizontal/Vertical Position CPR Cursor Position Report DECXCPR Extended Cursor Position Report CHA Cursor Horizontal Absolute CNL Cursor Next Line CPL Cursor Previous Line HPA Horizontal Position Absolute HPR Horizontal Position Relative VPA Vertical Line Position Absolute VPR Vertical Position Relative Horizontal Tabulation HT Horizontal Tab HTS Horizontal Tabulation Set TBC Tabulation Clear CBT Cursor Backward Tabulation CHT Cursor Horizontal Forward Tabulation DECST8C Set Tab at every 8 columns VT420PC Page Size and Arrangement DECCOLM Column Mode DECNCSM No Clear Screen on column Mode DECSCPP Set Columns Per Page DECSLPP Set Lines Per Page Page Movement Page 4

5 NP Next Page PP Preceding Page PPA Page Position Absolute PPR Page Position Relative PPB Page Position Backward Status Display DECSASD Select Active Status Display VT340, VT320 DECSSDT Select Status Display Type VT340, VT320 Right to Left DECRLM Right to Left Mode DECRLCM Right to Left Copy Mode DDD1 mode Hebrew DDD2 mode Hebrew DDD3 mode Hebrew Page 5

6 Window Management DECHCCM Horizontal Cursor Coupling Mode DECVCCM Vertical Cursor Coupling Mode DECPCCM Page Cursor Coupling Mode DECRQDE Request Displayed Extent DECSNLS Select Number of Lines per Screen (exception) VT420 DECARSM Auto Resize Mode DECterm, VT420 SU Pan Down SD Pan Up Visual Attributes and Renditions DECSCNM Screen Mode Line Renditions DECSWL Single Width Line DECDWL Double Width Line DECDHLT Double Height Line Top DECDHLB Double Height Line Bottom Character Renditions SGR Select Graphic Rendition 0=all off 1=bold 4=underscore 5=blink 7=reverse 22=not bold 24=non underline 25=not blink 27=non reverse Audible Indicators BEL Warning Bell DECSKCV Set Keyclick Volume DECSWBV Set Warning Bell Volume DECSMBV Set Margin Bell Volume Page 6

7 Mode States SM/RM Set Mode/Reset Mode ANSI 20=LNM 2=KAM 4=IRM VT102 12=SRM 3=CRM DEC Private 1=DECCKM 2=DECANM 3=DECCOLM 4=DECSCLM 5=DECSCNM 6=DECOM 7=DECAWM 8=DECARM 18=DECPFF 19=DECPEX 25=DECTCEM 42=DECNRCM 60=Horizontal Cursor Coupling 61=Vertical Cursor Coupling 64=Page Cursor Coupling 66=DECNKM VT320 67=DECBKM 68=DECKBUM VT320 69=DECLRMM (DECVSSM) 73=DECXLRM VT420 81=DECKPM VT420 34=DECRLM 35=DECHEBM 36=DECHEM 57=DECNAKB 95=DECNCSM 96=DECRLCM 98=DECARSM 99=DECMCM 100=DECAAM 101=DECCANSM 102=DECNULM 103=DECHPDXM 104=DECESKM 106=DECOSCNM 108=DECNUMLK 109=DECCAPSLK 110=DECKLHIM Editing Functions Page 7

8 IRM Insert/Replacement Mode VT102 ICH Insert Character VT102 DCH Delete Character VT102 IL Insert Line DL Delete Line DECIC Insert Column VT420 DECDC Delete Column VT420 ECH Erase Character EL Erase in Line DECSEL Selective Erase in Line ED Erase in Display DECSED Selective Erase in Display DECSCA Select Character Attribute (selective erase) OLTP Features Rectangular Area Operations DECCRA Copy Rectangular Area VT420 DECFRA Fill Rectangular Area VT420 DECERA Erase Rectangular Area VT420 DECSERA Selective Erase Rectangular Area VT420 DECCARA Change Attribute in Rectangular Area VT420 DECRARA Reverse Attribute in Rectangular Area VT420 DECSACE Select Attribute Change Extent Mode VT420 Data Integrity DECRQCRA Request Checksum of Rectangular Area VT420 DSR Device Status Report (Memory Checksum) VT420 DECCKSR Checksum Report VT420 Macros DECDMAC Define Macro VT420 DECINVM Invoke Macro VT420 DECMSR Macro Space Report VT420 Page 8

9 Saving and Restoring Terminal State Cursor Save Buffer DECSC Save Cursor DECRC Restore Cursor Terminal State Interrogation DECRQM Request Mode VT320 DECRPM Report Mode VT320 DECNKM Numeric Keypad Mode VT320 DECRQSS Request Selection or Setting VT320 DECRPSS Report Selection or Setting VT320 DECRQPSR Request Presentation State Report VT320 DECPSR Presentation State Report VT320 DECCIR Cursor Information Report VT320 DECTABSR Tabulation Stop Report VT320 DECRSPS Restore Presentation State VT320 DECRQTSR Request Terminal State Report VT320 DECTSR Terminal State Report VT320 DECRSTS Restore Terminal State VT320 Keyboard Processing Functions DECARM Autorepeat Mode DECBKM Backarrow Key Mode VT420 DECCKM Cursor Keys Mode DECEKBD Extended Keyboard Report VT420 DECKBUM Keyboard Usage Mode VT320 DECKPAM Keypad Application Mode DECKPM Key Position Mode VT420 DECKPNM Keypad Numeric Mode DECNKM Numeric Keypad Mode VT320 DSR Device Status Report (keyboard status) KAM Keyboard Action Mode DECLFC Local Functions Control VT420 DECLFKC Local Function Key Control VT420 DECSMKR Select Modifier Key Reporting VT420 DECHEBM Hebrew Keyboard Map mode DECHCEM Hebrew Encoding Mode DECNAKB NA/Greek Selection DECESKM Secondary Keyboard Language Mode DECSLCK Set Lock Key Style DECKBD Keyboard Dialect Selection DECNUMLK NumLock Mode DECCAPSLK CapsLock Mode DECKLHIM Keyboard LEDs Host Indicator Mode DECLL Load LEDs Page 9

10 Soft Key Mapping (UDK) DECUDK User Defined Keys DSR Device Status Report (UDK lock) DECPKA Program Key Action DECPFK Program Function Key DECPAK Program Alphanumeric Key DECCKD Copy Key Default DECRQPKFM Program Key Free Memory Inquiry DECPKFMR Program Key Free Memory Report DECRQKT Inquire a Key Type DECRPKT Report a Key Type DECRQKD Inquire a Key Definition DECRPFK Report definition of a Function Key DECRPAK Report definition of a Alphanumeric Key Soft Fonts (DRCS) DECDLD Downline Load Printing DECPEX Print Extent Mode DECPFF Print Form Feed Mode DSR Device Status Report (printer port) MC Media Copy DECSPRTT Select Printer Type DECSDPT Select Digital Printed Data Type DECSPPCS Select Proprinter Character Set Page 10

11 Terminal Communication and Synchronization BREAK XON XOFF ENQ Enquiry SRM Send Receive Mode DECXRLM Transmit Rate Limiting Mode VT420 DECMCM Modem Control Mode DECAAM Auto Answerback Mode DECLANS Load Answerback Message DECCANSM Conceal Answerback Message Mode DECNULM Ignore Null Mode DECHPDXM Half Duplex Mode DECSFC Select Flow Control DECSDDT Select Disconnect Delay Time DECSTRL Set Transmit Rate Limit DECSCS Select Communication Speed DECSCP Select Communication Port DECSPP Set Port Parameter Text Locator Extension DECEFR Enable Filter Rectangle UWS DECELR Enable Locator Reports UWS DECLKD Locator Key Definition UWS DECLRP Locator Report UWS DECRQLP Request Locator Position UWS DECSLE Select Locator Events UWS DSR Device Status Report (Locator Status) UWS Session Management Extension DECES Enable Sessions Documented Exceptions DECANM ANSI/VT52 Mode DECALN Screen Alignment DECAWM Autowrap Mode DECTST Invoke Confidence Test CRM Control Representation Mode Page 11

2006 Attachmate Corporation. All rights reserved. USA Patents Pending. Reflection Terminal Reference Manual for VT Hosts May 2006

2006 Attachmate Corporation. All rights reserved. USA Patents Pending. Reflection Terminal Reference Manual for VT Hosts May 2006 TERMINAL REFERENCE MANUAL FOR VT HOSTS WINDOWS XP WINDOWS 2000 WINDOWS SERVER 2003 WINDOWS 2000 SERVER WINDOWS TERMINAL SERVER CITRIX METAFRAME CITRIX METRAFRAME XP ENGLISH 2006 Attachmate Corporation.

More information

XTerm Control Sequences

XTerm Control Sequences Edward Moy University of California, Berkeley Revised by Stephen Gildea XConsortium (1994) Thomas Dickey XFree86 Project (1996-2006) invisible-island.net (2006-2017) updated for XTerm Patch #331 (2017/12/22)

More information

Xterm Control Sequences

Xterm Control Sequences Edward Moy University of California, Berkeley Revised by Stephen Gildea XConsortium (1994) Thomas Dickey XFree86 Project (1996-2005) Definitions C c The literal character c. Asingle (required) character.

More information

VT420 Video Terminal Programmer Reference Manual Update

VT420 Video Terminal Programmer Reference Manual Update VT420 Video Terminal Programmer Reference Manual Update EK VT42P UP. A01 Digital Equipment Corporation The information in this document is subject to change without notice and should not be construed as

More information

Beijer Electronics AB 2000, MA00453,

Beijer Electronics AB 2000, MA00453, VT100 emulation This manual presents installation and handling of the driver VT100 to the terminals in the E-series. The functionality in the E-terminals and in MAC Programmer+ are described in the E-manual.

More information

10200 Programmer Manual Rev. 004

10200 Programmer Manual Rev. 004 10200 Programmer Manual Rev. 004 Table of Contents Table of Contents... 2 Commands... 1 General Overview... 1 Command Summary in Alphabetical Order... 2 EPSON/IBM Mode... 8 Print and Line Feed Execution...

More information

Rev Sett. 08

Rev Sett. 08 Programmer Manual Rev. 01 78413024-001 Sett. 08 Table of Contents Table of Contents Table of Contents... ii Commands... 1 General Overview... 1 Command Summary in Alphabetical Order... 2 EPSON/IBM Mode...

More information

CIT326. Video Display Terminal. Programmer's Manual

CIT326. Video Display Terminal. Programmer's Manual Video Display Terminal Programmer's Manual + + P.N. 093-071 Rev. A September 1987 PROGRAMMER'S MANUAL CIT326 VIDEO DISPLAY TERMINAL CII10H CIE Terminals c 1987 DISCLAIMER CIE Terminals has made every effort

More information

VT 240series. Programmer Pocket Guide

VT 240series. Programmer Pocket Guide VT 240series Programmer Pocket Guide EK-VT240-HR-001 VT 240 Series Programmer Pocket Guide Digital Equipment Corporation 1st Edition, September 1983 Copyright 1983 by Digital Equipment Corporation. All

More information

UniOP VT100 Terminal Emulation - Ver. 3.16

UniOP VT100 Terminal Emulation - Ver. 3.16 UniOP VT100 Terminal Emulation - Ver. 3.16 This tech note describes the operation of the VT100 emulation software on UniOP. This document is a short reference for VT100 Terminal Emulation software. It

More information

LG Programmer s Reference Manual

LG Programmer s Reference Manual LG Programmer s Reference Manual Line Matrix Series Printers Trademark Acknowledgements ANSI is a registered trademark of American National Standards Institute, Inc. Code V is a trademark of Quality Micro

More information

RFTerm TM Reference Guide

RFTerm TM Reference Guide RFTerm TM Reference Guide Copyright November, 2004 by LXE Inc. All Rights Reserved Notices Notice: LXE Inc. reserves the right to make improvements or changes in the product described in this manual at

More information

Chapter 2. Native Emulation Commands 55 Format Control 55 Native Character Set 56 Bar Codes 58 Miscellaneous 64

Chapter 2. Native Emulation Commands 55 Format Control 55 Native Character Set 56 Bar Codes 58 Miscellaneous 64 Programmer s Ma anual Introduction This publication provides information about the commands supported by your printer. The commands are organized by function groups. Each command has both a brief and

More information

VT100 USER GUIDE EK-VT100-UG-001

VT100 USER GUIDE EK-VT100-UG-001 VT100 USER GUIDE EK-VT100-UG-001 1 st Edition, August 1978 Copyright @ 1978 by Digital Equipment Corporation The material in this manual is for informational purposes and is subject to change without notice.

More information

Digital ANSI-Compliant Printing Protocol Level 2 Programming Supplement

Digital ANSI-Compliant Printing Protocol Level 2 Programming Supplement Digital ANSI-Compliant Printing Protocol Level 2 Programming Supplement Order Number: EK PPLV2 PS. C01 This document contains device-specific information about level 2 of the Digital ANSI-Compliant Printing

More information

Message Display Operator Panel. UCT-33/36 Industrial Terminal. Manual 32.00

Message Display Operator Panel. UCT-33/36 Industrial Terminal. Manual 32.00 BRODERSEN Message Displays/Operator Panels Message Display Operator Panel UCT-33/36 Industrial Terminal Manual 32.00 Brodersen Controls A/S. Betonvej 0. DK-4000 Roskilde. Denmark. Tel (+45) 46 74 00 00.

More information

MOBILE THERMAL PRINTER

MOBILE THERMAL PRINTER MOBILE THERMAL PRINTER MODEL CMP-30 series ESC Command Manual Rev. 1.00 TABLE OF CONTENTS 1. Command Description... 6 2. Commands... 7 HT... 7 LF... 7 CR... 8 FF... 8 CAN... 8 DLE EOT... 9 DLE ENQ... 12

More information

GEnicom Series Programmer s Manual GEK 00031B

GEnicom Series Programmer s Manual GEK 00031B GEnicom 5000 Series Programmer s Manual GEK 00031B Table of Contents Page Chapter 1.Introduction...8 overview of printer emulation...8 Control Codes...8 Escape Sequences...8 CSI and OSC...9 Line Terminators...10

More information

Chapter 3. Information Representation

Chapter 3. Information Representation Chapter 3 Information Representation Instruction Set Architecture APPLICATION LEVEL HIGH-ORDER LANGUAGE LEVEL ASSEMBLY LEVEL OPERATING SYSTEM LEVEL INSTRUCTION SET ARCHITECTURE LEVEL 3 MICROCODE LEVEL

More information

EXPERIMENT 8: Introduction to Universal Serial Asynchronous Receive Transmit (USART)

EXPERIMENT 8: Introduction to Universal Serial Asynchronous Receive Transmit (USART) EXPERIMENT 8: Introduction to Universal Serial Asynchronous Receive Transmit (USART) Objective: Introduction To understand and apply USART command for sending and receiving data Universal Serial Asynchronous

More information

Programmer s Application Manual. MTPL Emulation

Programmer s Application Manual. MTPL Emulation Programmer s Application Manual MTPL Emulation Table of Contents Description of MTPL-Sequences Introduction................................... 2 Paper and Text Formatting.......................... 5 Form

More information

Programmer s Guide. Tally MT50 Emulation. PSi Drucker Family PP 80x

Programmer s Guide. Tally MT50 Emulation. PSi Drucker Family PP 80x Programmer s Guide Tally MT50 Emulation 22.08.2016 PSi Drucker Family PP 80x Acknowledgement Tally and TallyGenicom are registered trademarks of TallyGenicom. EPSON is a trademark of the Seiko Epson Corporation.

More information

Command Manual SPP-R200. Mobile Printer Rev

Command Manual SPP-R200. Mobile Printer Rev Command Manual SPP-R200 Mobile Printer Rev. 1.03 http://www.bixolon.com Table of Contents 1. Notice... 3 2. Control Commands List... 3 3. Control Commands Details... 5 3-1 Command Notation... 5 3-2 Explanation

More information

Programmers Guide. IBM ProPrinter 4207, 4208 XL 24 Quick Reference. For Printer PP 40x and PP 80x

Programmers Guide. IBM ProPrinter 4207, 4208 XL 24 Quick Reference. For Printer PP 40x and PP 80x 12.08.2016 Programmers Guide IBM ProPrinter 4207, 4208 XL 24 Quick Reference For Printer PP 40x and PP 80x IBM ProPrinter 4207, 4208 XL 24 Quick Reference Acknowledgement IBM is a Trademark of International

More information

PJ-600 Series Printer ESC/P Command Reference

PJ-600 Series Printer ESC/P Command Reference PJ-600 Series Printer ESC/P Command Reference Version 1.00 Model Name: PJ-622/623/662/663 Brother Industries, Ltd. 1 Machine Model: PJ-622/623/662/663 IMPORTANT - PLEASE READ CAREFULLY This

More information

1.1. INTRODUCTION 1.2. NUMBER SYSTEMS

1.1. INTRODUCTION 1.2. NUMBER SYSTEMS Chapter 1. 1.1. INTRODUCTION Digital computers have brought about the information age that we live in today. Computers are important tools because they can locate and process enormous amounts of information

More information

Introduction. This section describes the cursor positioning commands.

Introduction. This section describes the cursor positioning commands. 6 Cursor Positioning Introduction This section describes the cursor positioning commands. Although the printer does not actually have a cursor, the PCL cursor position refers to the Current Active Position

More information

AccuTerm Mobile. User Guide

AccuTerm Mobile. User Guide AccuTerm Mobile User Guide Table of Contents Copyright and Trademarks...3 1. Introduction...4 1.1. What is AccuTerm Mobile...4 2. Program Workspace...5 2.1. Connecting to a Host...5 2.1.1. Creating a New

More information

Datapanel. VT100 Terminal Emulator for Datapanels. Operator Interface Products. User's Manual

Datapanel. VT100 Terminal Emulator for Datapanels. Operator Interface Products. User's Manual Datapanel Operator Interface Products VT100 Terminal Emulator for Datapanels User's Manual GFK-1698 July 1999 Warnings, Cautions, and Notes as Used in this Publication GFL-002 Warning Warning notices are

More information

MK D Imager Barcode Scanner Configuration Guide

MK D Imager Barcode Scanner Configuration Guide MK-5500 2D Imager Barcode Scanner Configuration Guide V1.4 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 2 Communication Interfaces...

More information

The Transtec TT401 Terminal

The Transtec TT401 Terminal The Transtec TT401 Terminal Martin Hepperle, June 2018 The Transtec TT401 is a simple serial terminal and was sold by the German company Transtec around 1989. Transtec was a German company founded in 1980

More information

EXPERIMENT 7: Introduction to Universal Serial Asynchronous Receive Transmit (USART)

EXPERIMENT 7: Introduction to Universal Serial Asynchronous Receive Transmit (USART) EXPERIMENT 7: Introduction to Universal Serial Asynchronous Receive Transmit (USART) Objective: To understand and apply USART command for sending and receiving data Introduction Universal Serial Asynchronous

More information

WY-60 Programmer's Guide WYSE I I I I

WY-60 Programmer's Guide WYSE I I I I WY-60 Programmer's Guide WYSE I I I I Copyright Notice 1987 Wyse Technology. ALL RIGHTS RESERVED. This manual and the software and firmware described in it are copyrighted by Wyse Technology. You may not

More information

Command Manual Metapace T-2. Thermal Printer Rev. 1.00

Command Manual Metapace T-2. Thermal Printer Rev. 1.00 Command Manual Metapace T-2 Thermal Printer Rev. 1.00 1. Control Commands List Command HT LF FF CR CAN DLE EOT DLE ENQ DLE DC4 ESC FF ESC SP ESC! ESC $ ESC % ESC & ESC * ESC - ESC 2 ESC 3 ESC = ESC? ESC

More information

Command Manual SRP-350 Thermal Printer Rev. 1.01

Command Manual SRP-350 Thermal Printer Rev. 1.01 Command Manual SRP-350 Thermal Printer Rev. 1.01 http://www.samsungminiprinters.com 1. Control Commands List Control codes Hexadecimal codes Function 09 Horizontal tab 0A Print and line feed

More information

Command Manual SPP-R200. Mobile Printer Rev

Command Manual SPP-R200. Mobile Printer Rev Command Manual SPP-R200 Mobile Printer Rev. 0.10 http://www.samsungminiprinters.com 1. Control Commands List COMMAND Name Funtion type 1 LF Print and line feed Print 2 FF Print and return to standard mode

More information

VISUAL TECHNOLOGY INCORPORATED, 540 MAIN STREET, TEWKSBURY, MA VISUAL 100 REFERENCE MANUAL

VISUAL TECHNOLOGY INCORPORATED, 540 MAIN STREET, TEWKSBURY, MA VISUAL 100 REFERENCE MANUAL See for yourself WARNING This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause interference to radio communications.

More information

APEX & ANDES Series. Printer Command Language Developer s Manual

APEX & ANDES Series. Printer Command Language Developer s Manual APEX & ANDES Series Printer Command Language Developer s Manual Document Revision History Document Title: APEX and ANDES Series Printer Command Language Developer s Manual Revision Date Revision History

More information

Number Systems II MA1S1. Tristan McLoughlin. November 30, 2013

Number Systems II MA1S1. Tristan McLoughlin. November 30, 2013 Number Systems II MA1S1 Tristan McLoughlin November 30, 2013 http://en.wikipedia.org/wiki/binary numeral system http://accu.org/index.php/articles/18 http://www.binaryconvert.com http://en.wikipedia.org/wiki/ascii

More information

ASCII Code - The extended ASCII table

ASCII Code - The extended ASCII table ASCII Code - The extended ASCII table ASCII, stands for American Standard Code for Information Interchange. It's a 7-bit character code where every single bit represents a unique character. On this webpage

More information

TECHNOLOGY, INC. ANAHEIM J CALIFORNIA FREEDOM AVE. [714]

TECHNOLOGY, INC. ANAHEIM J CALIFORNIA FREEDOM AVE. [714] TECHNOLOGY, INC. 165 FREEDOM AVE. ANAHEIM J CALIFORNIA 92801 [714] 992 2860 TABLE OF CONTENTS SECTION PAGE ONE 113 120 SPECIFICATION 1 TWO 113 120 FEATURES 3 THREE 113 120 OPERATION 5 FOUR PROGRAMMING

More information

Emulations Applications Manual

Emulations Applications Manual Emulations Applications Manual 6800 Series Printers Trademark Acknowledgements Acrobat Reader is a trademark of Adobe Systems Incorporated. DEC is a trademark of Compaq Computer Corp. Epson is a trademark

More information

FD-011WU. 2D Barcode Reader User Guide V1.6CC

FD-011WU. 2D Barcode Reader User Guide V1.6CC FD-011WU 2D Barcode Reader User Guide V1.6CC Table of Contents 1 Getting Started... 1 1.1 Factory Defaults... 1 2 Communication Interfaces...2 2.1 TTL-232 Interface... 2 2.2 Baud Rate... 3 2.3 Data Bit

More information

ACS-LCD-128x64. LCD Graphic Display Terminal. General Description. Features. Typical Applications. Specifications. 22-Feb-08

ACS-LCD-128x64. LCD Graphic Display Terminal. General Description. Features. Typical Applications. Specifications. 22-Feb-08 6 2 3 3 E. S a w g ra s s R d S a ra s o ta, F L. 3 4 2 4 0 (9 4 1 )3 7 7-5 7 7 5 F A X(9 4 1 )3 7 8-4 2 2 6 www.acscontrol.com 22-Feb-08 ACS-LCD-128x64 LCD Graphic Display Terminal General Description

More information

Control Command list (ESC/POS)

Control Command list (ESC/POS) Printer Command Control Command list (ESC/POS) Rev 1.4 1. Command Summary 2. Control Command 3. [STAR Emulation Mode] Command Summary SAM4S PRINTER ELLIX30/40 1 Control Command list 1. Command Summary

More information

WinPOS system. Co., ltd. WP-K837 series. Esc/POS Command specifications Ver.0.94

WinPOS system. Co., ltd. WP-K837 series. Esc/POS Command specifications Ver.0.94 WinPOS system. Co., ltd. WP-K837 series Esc/POS Command specifications 2014-05-06 Ver.0.94 LF Prints buffered data and feeds one line. Syntax: ASCII LF Hex 0A Decimal 10 Remarks: This command sets the

More information

&RS\ULJKW,QIRUPDWLRQ ,PSRUWDQW8VHU,QIRUPDWLRQ )&&&RPSOLDQFH (GLWLRQ,QIRUPDWLRQ 7UDGHPDUNV

&RS\ULJKW,QIRUPDWLRQ ,PSRUWDQW8VHU,QIRUPDWLRQ )&&&RPSOLDQFH (GLWLRQ,QIRUPDWLRQ 7UDGHPDUNV &RS\ULJKW,QIRUPDWLRQ This manual is 1994 Dynapro Technologies Inc. All Rights Reserved. Reproduction of the contents of this copyrighted manual in whole or in part, by any means, electronic or mechanical,

More information

INTERNATIONAL STANQARD 18538

INTERNATIONAL STANQARD 18538 INTERNATIONAL STANQARD 188 First edi tion 1991-09- 1 Information technology - Control functions for text communication Technologies de I information - Foncfions de commande pour la communication de texte

More information

QTERM-J10/N15 USER'S MANUAL REVISION 13

QTERM-J10/N15 USER'S MANUAL REVISION 13 QTERM-J0/N5 USER'S MANUAL REVISION 3 M0-009-00 Rev 3 QSI CORPORATION 222 South West Temple #50 Salt Lake City, UTAH 845-2648 USA Phone 80-466-8770 Fax 80-466-8792 Email info@qsicorp.com Web www.qsicorp.com

More information

KS Emulation Programmer s Reference Manual

KS Emulation Programmer s Reference Manual KS Emulation Programmer s Reference Manual Line Matrix Series H-Series Printers Trademark Acknowledgements Printronix and LinePrinter Plus are registered trademarks of Printronix, LLC IBM is a registered

More information

Ultimate-II MPS Printer Emulation

Ultimate-II MPS Printer Emulation Ultimate-II MPS Printer Emulation René Garcia All rights reserved. Version 1.0, May 27 th 2016 Table of Contents 1. Introduction... 5 1.1. Context... 5 1.2. Purpose of this document... 5 2. Configuration...

More information

PowerTerm WBT Terminal Emulator

PowerTerm WBT Terminal Emulator PowerTerm WBT Terminal Emulator User s Guide Version 6.3.5 Ericom North America Ericom Software Inc. 3 Herbert Ave., Bldg. #4 Closter, NJ 0764 USA Tel: + 0 767 0 Fax: + 0 767 05 Toll Free: 888 769 7876

More information

VT50 VIDEO TERMINAL PROGRAMMER'S MANUAL

VT50 VIDEO TERMINAL PROGRAMMER'S MANUAL VT50 VIDEO TERMINAL PROGRAMMER'S MANUAL PRELIMINARY COPY The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation.

More information

Dot Matrix Printer. SP2000 Series. Programmer s Manual

Dot Matrix Printer. SP2000 Series. Programmer s Manual Dot Matrix Printer SP2000 Series Programmer s Manual TABLE OF CONTENTS 1. Control Codes (Star Mode)... 1 1-1. Control Codes List... 1 1-1-1. Character Selection... 1 1-1-2. Print Position Control... 3

More information

PROGRAMMER S MANUAL 58mm Printer

PROGRAMMER S MANUAL 58mm Printer PROGRAMMER S MANUAL 58mm Printer (#)Note: this command is available for POS58 model. 5. Printer Commands List 5.1 Command Conception POS58 series printers support ESC/POS print commands. Descriptions as

More information

Serial I/O. 4: Serial I/O. CET360 Microprocessor Engineering. J. Sumey

Serial I/O. 4: Serial I/O. CET360 Microprocessor Engineering. J. Sumey 4: Serial I/O CET360 Microprocessor Engineering J. Sumey Introduction serial, i.e. bit-at-a-time, interfacing techniques are useful when parallel interfacing limitations become problematic distance limitations

More information

Command Manual.

Command Manual. Command Manual http://www.woosim.com CONTENTS 1. Printer Control Function...3 1.1. Print Commands....5 1.2. Line Spacing Commands....8 1.3. Character Commands....9 1.4. Print Position Commands.... 19 1.5.

More information

Visual KeyMaker. Programming Software Instructions. Contents A B

Visual KeyMaker. Programming Software Instructions. Contents A B Visual KeyMaker Programming Software Instructions for TLM2260 Programmable Keyboard REV.E May 31, 2007 Quick Start Map A B Introduction Install Visual KeyMaker Contents C Connect Programmable Keyboard

More information

T.140 (02/98) Protocol for multimedia application text conversation SERIES T: TERMINALS FOR TELEMATIC SERVICES. ITU-T Recommendation T.

T.140 (02/98) Protocol for multimedia application text conversation SERIES T: TERMINALS FOR TELEMATIC SERVICES. ITU-T Recommendation T. INTERNATIONAL TELECOMMUNICATION UNION TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU T.140 (02/98) SERIES T: TERMINALS FOR TELEMATIC SERVICES Protocol for multimedia application text conversation ITU-T

More information

PANDA Thermal Receipt Printer. Programmer Manual

PANDA Thermal Receipt Printer. Programmer Manual PANDA Thermal Receipt Printer Programmer Manual 1. COMMANDS 1.1 Command Notation The name of the command. [Format] The code sequence. [Range] Gives the allowable ranges for the arguments. Describes the

More information

= 300,1200,1800 or 4800 Baud Transmission ASCll Code Versatile Forms Handling EIA RS 232C Interface Upper & Lower Case

= 300,1200,1800 or 4800 Baud Transmission ASCll Code Versatile Forms Handling EIA RS 232C Interface Upper & Lower Case Highlights 7 x 9 Impact Matrix Printer Up to 200 CPS Print Speed 1 Automatic Bi-Directional Printing = 300,1200,1800 or 4800 Baud Transmission ASCll Code Versatile Forms Handling EIA RS 232C Interface

More information

melabs Serial LCD Firmware Version 1.1 3/5/07

melabs Serial LCD Firmware Version 1.1 3/5/07 melabs Serial LCD Firmware Version 1.1 3/5/07 The melabs Serial LCD (SLCD) can display serial data from either asynchronous RS232-style or synchronous I 2 C input. A range of baud rates from 2400 to 57,600

More information

J2 LCM Customer Display. Manual

J2 LCM Customer Display. Manual J2 LCM Customer Display Manual July 2012 Contents LCM Customer Display... 3 Overview... 3 Customer Display Configureation... 4 Port Settings... 4 CD Settings... 5 Emulation Mode... 5 Character Sets...

More information

BD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide

BD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide BD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide V 2.1 Table of Contents 1 Getting Started. 3 1.1 About This Guide.. 3 1.2 Barcode Scanning.. 3 1.3 Factory Defaults.. 3 1.4 Pairing Cradle 4 1.5

More information

AT&T is a trademark of American Telephone and Telegraph Company:

AT&T is a trademark of American Telephone and Telegraph Company: First Edition, November 1989 The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation

More information

S-Series Sensor ASCII Protocol v8.1.0

S-Series Sensor ASCII Protocol v8.1.0 S-Series Sensor v8.1.0 Legend: ADR Node/Slave Address TIME STAT Status Byte ERR CTRL Control Byte SP # POS Position DATA TARG Target CHAR VEL Velocity OFF SN CODE PAR # Serial Number Security Code Parameter

More information

CMSC 313 Lecture 03 Multiple-byte data big-endian vs little-endian sign extension Multiplication and division Floating point formats Character Codes

CMSC 313 Lecture 03 Multiple-byte data big-endian vs little-endian sign extension Multiplication and division Floating point formats Character Codes Multiple-byte data CMSC 313 Lecture 03 big-endian vs little-endian sign extension Multiplication and division Floating point formats Character Codes UMBC, CMSC313, Richard Chang 4-5 Chapter

More information

Mobile Printer. Command Manual Ver Models: SM series

Mobile Printer. Command Manual Ver Models: SM series Mobile Printer Command Manual Ver. 1.9 Models: SM series CONTENTS 1. Printer Control Function...3 1.1. Print Commands...5 1.2. Line Spacing Commands....7 1.3. Character Commands...8 1.4. Print Position

More information

Configuring Terminal Emulation on the T2480 and T2485

Configuring Terminal Emulation on the T2480 and T2485 Part No. 067564-002 Configuring Terminal Emulation on the T2480 and T2485 This instruction sheet contains additional information for the TRAKKER Antares Terminal Emulation User s Guide (Part No. 066694-002).

More information

AT&T. AT&T Issue 1 June GBCS-2 Terminal User's Guide and Service Manual

AT&T. AT&T Issue 1 June GBCS-2 Terminal User's Guide and Service Manual AT&T AT&T 555-230-876 Issue 1 June 1996 715GBCS-2 Terminal User's Guide and Service Manual Copyright 1996, AT&T All Rights Reserved Printed in U.S.A. Notice Every effort was made to ensure that the information

More information

2a. Codes and number systems (continued) How to get the binary representation of an integer: special case of application of the inverse Horner scheme

2a. Codes and number systems (continued) How to get the binary representation of an integer: special case of application of the inverse Horner scheme 2a. Codes and number systems (continued) How to get the binary representation of an integer: special case of application of the inverse Horner scheme repeated (integer) division by two. Example: What is

More information

FEC-240G. Rev. Date

FEC-240G. Rev. Date Model User s Manual Contents Contents. 1 Features... 2 Type Model and Serial Number... 2 Specifications... 3 Interface Connections...... 4 DIP Switch Setting... 6 Dimension... 7 Command Set Table... 8

More information

4 Pr P i r n i t n e t r e Co C m o m m a m n a d n s d Li L s i t N. C m o m m a m n a d

4 Pr P i r n i t n e t r e Co C m o m m a m n a d n s d Li L s i t N. C m o m m a m n a d 4. Printer Commands List NO. Command Function Description 01 HT Horizontal tab(#) 02 LF Print and line feed 03 CR Print and carriage return (#) 04 ESC SO Set all characters times width print 05 ESC DC4

More information

A GUIDE TO RS-232 COMMUNICATION WITH FX PLCS

A GUIDE TO RS-232 COMMUNICATION WITH FX PLCS A GUIDE TO RS-232 COMMUNICATION WITH FX PLCS Page 1 of 35 A GUIDE TO RS-232 COMMUNICATION WITH FX PLCS This document has been written specifically for FX and FX0N users that are unfamiliar with RS-232

More information

COMMAND REFERENCE COMMAND REFERENCE PLUS II

COMMAND REFERENCE COMMAND REFERENCE PLUS II COMMAND REFERENCE PLUS II Edit by: CUSTOM ENGINEERING S.p.A. Str. Berettine 2-43010 Fontevivo (PARMA) - Italy http: www.custom.biz All rights reserved 2 Command Reference Introduction 1 INTRODUCTION 1.1

More information

i Term 1U Rack Mount Terminal

i Term 1U Rack Mount Terminal i Term 1U Rack Mount Terminal Model RFT-15-232 Sun UK Model UKT-R1U-TERM March 03, 2003 CONTENTS 1 Installation 2 Setup 3 Local Keyboard Commands 4 Connector Pin Assignment 5 Command Guide 6 ANSI Command

More information

CMSC 313 COMPUTER ORGANIZATION & ASSEMBLY LANGUAGE PROGRAMMING LECTURE 02, FALL 2012

CMSC 313 COMPUTER ORGANIZATION & ASSEMBLY LANGUAGE PROGRAMMING LECTURE 02, FALL 2012 CMSC 33 COMPUTER ORGANIZATION & ASSEMBLY LANGUAGE PROGRAMMING LECTURE 2, FALL 22 TOPICS TODAY Bits of Memory Data formats for negative numbers Modulo arithmetic & two s complement Floating point formats

More information

Mounting Dimensions / Viewing 2 Mounting Options 3. Wiring Configuration 4. Quick Set up Procedure 5. Changing Intensity 6.

Mounting Dimensions / Viewing 2 Mounting Options 3. Wiring Configuration 4. Quick Set up Procedure 5. Changing Intensity 6. Section Mounting Dimensions / Viewing 2 Mounting Options 3 Section 2 Wiring Configuration 4 Section 3 Quick Set up Procedure 5 Section 4 Changing Intensity 6 Section 5 Option Summary 7 Section 6 Option

More information

Chemistry Hour Exam 2

Chemistry Hour Exam 2 Chemistry 838 - Hour Exam 2 Fall 2003 Department of Chemistry Michigan State University East Lansing, MI 48824 Name Student Number Question Points Score 1 15 2 15 3 15 4 15 5 15 6 15 7 15 8 15 9 15 Total

More information

SRP-275II Impact Printer Command Manual

SRP-275II Impact Printer Command Manual SRP-275II Impact Printer Command Manual Contents 1. Notice...3 2. SRP-275II Supported Commands...4 2-1 Command Description Items...5 2-2 Details of Control Commands...6 Rev. 1.00 BIXOLON - 2 - 1. Notice

More information

TSP552 TSP552II TSP2000

TSP552 TSP552II TSP2000 THERMAL PRINTER TSP552 TSP552II TSP2000 PROGRAMMER'S MANUAL Trademark acknowledgments TSP552, TSP552II, TSP2000: Star Micronics Co., Ltd. ESC/POS: Seiko Epson Corporation Notice All rights reserved. Reproduction

More information

Tally Dascom DT-210/230 Programming Guide V1.1

Tally Dascom DT-210/230 Programming Guide V1.1 About This Manual Please read this technical manual before programming. Main description for command as below: 1) Function This is the first part of command description. Here we propose the command of

More information

Reference Manual December 1997

Reference Manual December 1997 EPSON ESC/P Reference Manual December 1997 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

More information

CUSTOM MANUFACTURED IN U.S.A. BY RADIO SHACK, A DIVISION OF TANDY CORPORATION CAT. NO

CUSTOM MANUFACTURED IN U.S.A. BY RADIO SHACK, A DIVISION OF TANDY CORPORATION CAT. NO CUSTOM MANUFACTURED IN U.S.A. BY RADIO SHACK, A DIVISION OF TANDY CORPORATION CAT. NO. 26-6050 TRS-80 DT-1 OWNER'S MANUAL Contents Introduction 1 1/ Description of the DT-1 3 2/ Setting Up the DT-1 5

More information

Printer Control Command Set

Printer Control Command Set Printer Control Command Set Technical Manual Revision: November 1, 2017 Omniprint Inc. 1923 East Deere Ave., Santa Ana, California 92705, U.S.A. T: 949.833.0080 :: F: 949.833.0040 www.omniprintinc.com

More information

OKI Emulation. Programmer s Reference Manual. Line Matrix Series Printers

OKI Emulation. Programmer s Reference Manual. Line Matrix Series Printers OKI Emulation Programmer s Reference Manual Line Matrix Series Printers Trademark Acknowledgements LinePrinter Plus is a registered trademark of Printronix, LLC. Printronix is a registered trademark of

More information

ii~i111~i;jl!li!111il AD--A

ii~i111~i;jl!li!111il AD--A WRDC-TR-90-8007 Volume VIII Part 11 AD--A2 4 8 983 INTEGRATED INFORMATION SUPPORT SYSTEM (IISS) Volume VIII - User Interface Subsystem Part 11 - Virtual Terminal Development Specification S. Barker Control

More information

QTERM-J10/N15 USER'S MANUAL REVISION 11

QTERM-J10/N15 USER'S MANUAL REVISION 11 QTERM-J0/N5 USER'S MANUAL REVISION QSI CORPORATION 222 South West Temple #50 Salt Lake City, UTAH 845-2648 USA Phone 80-466-8770 Fax 80-466-8792 Email info@qsicorp.com Web www.qsicorp.com Manual 0049-08

More information

richlove@carnationsoftware.com www.carnationsoftware.com You can use Command F to find what you are looking for in this document. Version History is available at http://www.carnationsoftware.com/carnation/macwisexversions.html

More information

KSSM Emulation for the P8000 H-Series Programmer s Reference Manual

KSSM Emulation for the P8000 H-Series Programmer s Reference Manual KSSM Emulation for the P8000 H-Series Programmer s Reference Manual Line Matrix Series Printers Printronix, LLC makes no representations or warranties of any kind regarding this material, including, but

More information

Command Emulator ESC/POS Mode Command Specifications

Command Emulator ESC/POS Mode Command Specifications Line Thermal Printer ESC/POS Mode Command Specifications Revision 1.02 Star Micronics Co., Ltd. Special Products Operating Division TABLE OF CONTENTS 1....1-1 1-1) Command List... 1-1 1-2) COMMAND DETAILS...

More information

SRP-F310/312 Command Manual Rev. 1.00

SRP-F310/312 Command Manual Rev. 1.00 Command Manual Rev. 1.00 http://www.bixolon.com Contents 1. Notice...3 2. Control Commands List in Alphanumeric Order...4 2-1 Command Description Items...6 2-2 Details of Control Commands...7 Rev. 1.00

More information

Basic Ergonomic Video Display Terminal Operator's Guide

Basic Ergonomic Video Display Terminal Operator's Guide BFlSD5181 Basic Four@ Ergonomic Video Display Terminal Operator's Guide Basic Four Information Systems @ The information contained herein is proprietary to and considered a trade secret of Management Assistance

More information

Radio Shaett COMPUTER CUSTOMER SERVICE #7879 (817) A Division of Tandy Corporation 400 ATRIUM - ONE TANDY CENTER, FORT WORTH, TEXAS 76102

Radio Shaett COMPUTER CUSTOMER SERVICE #7879 (817) A Division of Tandy Corporation 400 ATRIUM - ONE TANDY CENTER, FORT WORTH, TEXAS 76102 ~ Radio Shaett COMPUTER CUSTOMER SERVICE #7879 (817) 390-3011 A Division of Tandy Corporation 400 ATRIUM - ONE TANDY CENTER, FORT WORTH, TEXAS 76102 PAGE 1 OF 13 TRS-80 VIDEOTEX SOFTWARE SPECIFICATIONS

More information

Command Reference Manual PCL 5e

Command Reference Manual PCL 5e Command Reference Manual PCL 5e 1 CONTENTS 1. DESCRIPTIONS OF CONTROL CODES HP LASERJET 5 EMULATION...1 1.1 Job Control Commands...1 1.2 Page Control Commands...8 1.3 Cursor Positing...14 1.4 PCL Font

More information

XR-200 MINI DOT IMPACT PRINTER PRODUCT SPECIFICATION DATE : MAY 3, 2004 MANUAL REVISION 2.0

XR-200 MINI DOT IMPACT PRINTER PRODUCT SPECIFICATION DATE : MAY 3, 2004 MANUAL REVISION 2.0 XR-200 MINI DOT IMPACT PRINTER PRODUCT SPECIFICATI DATE : MAY 3, 2004 MANUAL REVISI 2.0 Features Dip Switch Configuration Emulation mode, communications mode, baud rate, serial/parallel handshake, and

More information

The Everex Scheduler TM Program

The Everex Scheduler TM Program ~~IVERE The Everex Scheduler TM Program OWNER'S MANUAL AND REFERENCE GUIDE (VERSION 2.0) EVER for EXcellence MAN-00039-20 The Everex Scheduler Program OWNER'S MANUAL AND REFERENCE GUIDE (VERSION 2.0) EVEREX

More information

Introduction Page 1. Power Supply Requirements & Hardware Options Page 2. External Connectors (Functions & Pinouts) Page 2

Introduction Page 1. Power Supply Requirements & Hardware Options Page 2. External Connectors (Functions & Pinouts) Page 2 A262B Interface Board Connection and Application Data Introduction Page 1 Power Supply Requirements & Hardware Options Page 2 External Connectors (Functions & Pinouts) Page 2 Software Requirements (Control

More information

SRP-275III Command Manual Rev. 1.00

SRP-275III Command Manual Rev. 1.00 Rev. 1.00 http://www.bixolon.com Contents 1. Notice... 3 2. SRP-275III Supported Commands... 4 2-1 Command Description Items... 5 2-2 Details of Control Commands... 6 Rev. 1.00 BIXOLON - 2 - 1. Notice

More information

telnet Client User Interface for Accessing MX7cK s push buttons and LEDs. Template for P1.3

telnet Client User Interface for Accessing MX7cK s push buttons and LEDs. Template for P1.3 telnet Client User Interface for Accessing MX7cK s push buttons and LEDs. Template for P1.3 1 Motivation for Using telnet We have written a ToUpper server that uses TCP and runs on the TCP/IP stack of

More information