Dell Server Deployment Pack Version 2.0 for Microsoft System Center Configuration Manager User's Guide

Size: px
Start display at page:

Download "Dell Server Deployment Pack Version 2.0 for Microsoft System Center Configuration Manager User's Guide"

Transcription

1 Dell Server Deployment Pack Version 2.0 for Microsoft System Center Configuration Manager User's Guide

2 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this publication is subject to change without notice Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the Dell logo, Dell Precision, OptiPlex, Latitude, PowerEdge, PowerVault, PowerConnect, OpenManage, EqualLogic, Compellent, KACE, FlexAddress, Force10 and Vostro are trademarks of Dell Inc. Intel, Pentium, Xeon, Core and Celeron are registered trademarks of Intel Corporation in the U.S. and other countries. AMD is a registered trademark and AMD Opteron, AMD Phenom and AMD Sempron are trademarks of Advanced Micro Devices, Inc. Microsoft, Windows, Windows Server, Internet Explorer, MS-DOS, Windows Vista and Active Directory are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell and SUSE are registered trademarks of Novell Inc. in the United States and other countries. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Citrix, Xen, XenServer and XenMotion are either registered trademarks or trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware, Virtual SMP, vmotion, vcenter and vsphere are registered trademarks or trademarks of VMware, Inc. in the United States or other countries. IBM is a registered trademark of International Business Machines Corporation. Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own Rev. A00

3 Contents Notes, Cautions, and Warnings Introduction...5 What's New in Version Dell Server Deployment Pack Features Overview...5 Other Dell Documents You Might Need Before you Begin Using Configuration Manager...7 Recommended DTK version for Configuration Manager Using The Dell Server Deployment Pack on Systems Running Configuration Manager Importing a DTK Package...9 Upgrading a DTK Package...9 Creating a Boot Image for Deploying Dell PowerEdge Servers...10 Distributing Content and Updating Distribution Points...11 Importing Dell Server Driver Packages...11 Enabling Command Prompt for Debugging Boot Images...12 Configuring your Servers Hardware Components...12 Creating a Task Sequence...12 Creating a Dell specific Task Sequence...12 Creating a Custom Task Sequence...13 Editing a Task Sequence...13 Configuring Task Sequence Actions...13 Configuring your System BIOS...14 Configuring Set Boot Order...15 Configuring RAID Using RAID Config (wizard)...15 Using the Array Builder...16 How Array Builder Works...16 Controllers...16 Variable Conditions...17 Arrays...18 Logical Drives (also known as Virtual Disks)...18 Disks (also known as Array Disks)...19 Exporting to XML...20 Importing XML...20 Saving to Package...20

4 Creating Task Sequences for RAID, DRAC, and idrac...20 Variable Replacement...21 Configuring Variable Replacement Tab...22 Log / Return Files...22 Configuring the Task Sequence Steps to Apply Operating System Image And Driver Package...22 Applying Operating System Image...23 Adding Dell Driver Packages...23 Advertising a Task Sequence...23 Best Practices for Advertising a Task Sequence...23 Deploying a Task Sequence Using The Dell Server Deployment Pack on Systems Running Configuration Manager Importing a DTK Package...25 Upgrading a DTK Package...25 Creating a Boot Image for Deploying Dell PowerEdge Servers...26 Hardware Configuration and Operating System Deployment on Unknown Computers...27 Configuring the BIOS Action Settings...27 Updating and Managing Distribution Points...28 Importing Dell Server Driver Packages...28 Enabling Command Prompt for Debugging Boot Images...29 Configuring your Servers Hardware Components...29 Creating a Task Sequence...29 Creating a Dell specific Task Sequence...29 Creating a Custom Task Sequence...30 Editing a Task Sequence...30 Rebooting to PXE USB Custom Action on Systems Running Configuration Manager 2007 SP Advertising a Task Sequence...31 Best Practices for Advertising a Task Sequence...32 Deploying a Task Sequence Troubleshooting...33 Task sequences fail or act incorrectly after an upgrade on Configuration Manager 2007 SP Task sequences fail or act incorrectly after an upgrade on Configuration Manager 2007 SP Operating System Deployment Fails in Microsoft Windows Server DTK Configuration wizard completes with errors...34

5 Introduction 1 This document describes the activities that you can perform with Dell Server Deployment Pack Version 2.0 for Microsoft System Center Configuration Manager (Configuration Manager.) What's New in Version 2.0 Support for Microsoft System Center 2012 Configuration Manager. Support for 12th generation of PowerEdge servers. Support for Dell Deployment ToolKit (DTK) v3.5 to v4.0. Task sequence optimized in Configuration Manager 2007 SP2 and later. Support to extract Dell driver packages directly from ISO images stored locally or on the network. Dell Server Deployment Pack Features Overview You can perform the following tasks using the Dell Server Deployment Pack: Configure the server's Dell Remote Access Controller (DRAC), integrated Dell Remote Access Controller (idrac), RAID, and BIOS using INI files and Command Line Interface (CLI) options. You can also configure RAID using the Array Builder Wizard. Create a Dell specific boot image that is used in the operating system deployment. Import and apply driver installation packages for specific Dell servers. Consolidated launch points to various wizards, to perform a typical server deployment on site server installation. Enhanced support for up to sixteen global and dedicated RAID hot spares. Support for Microsoft System Center Configuration Manager 2007 SP1, R2, SP2, R3, and Microsoft System Center 2012 Configuration Manager releases. Support for importing of Dell Deployment ToolKit (DTK) using the Deployment ToolKit Configuration Wizard. Support for importing Dell driver packages from the Configuration Manager Admin Console. Support for deployment using x64 boot images (DTK with 64-bit support is required.) Other Dell Documents You Might Need In addition to this guide and the online help, you might need to refer the following documents to get details on specific Dell OpenManage products. These documents are available on the Dell Support website at support.dell.com/manuals. The Dell Server Deployment Pack Version 2.0 for Microsoft System Center Configuration Manager Install Guide provides information about installing DSDP 2.0 on your system. The Dell Remote Access Controller 5 Firmware User's Guide provides comprehensive information about using the RACADM command line utility to configure a DRAC 5. The Dell Chassis Management Controller User's Guide provides comprehensive information about using the controller that manages all modules in the chassis containing your Dell server. The Integrated Dell Remote Access Controller User's Guide provides information about installation, configuration, and maintenance of the Integrated Dell Remote Access Controller (idrac) on management and managed systems. 5

6 The Dell Remote Access Controller/Modular Chassis User's Guide provides information about installation, configuration, and maintenance of the Dell Remote Access Controller/Modular Chassis (DRAC/MC). The Command Line Reference Guide for idrac6 and CMC provides comprehensive information about using the RACADM command line utility. The Dell OpenManage Deployment ToolKit User's Guide provides general, best practices procedures that focus on the basic tasks for a successful deployment using Windows Preinstallation Environment (Windows PE) or embedded Linux. The Dell OpenManage Deployment ToolKit Command Line Interface Reference Guide provides information on the command line utilities to configure system features. The Server Update Utility User's Guide provides information on how to identify and apply updates to your system. The Dell Repository Manager User s Guide provides information on how to create customized bundles and repositories for servers running on Microsoft Windows operating systems. The Glossary for information on terms used in this document. 6

7 2 Before you Begin Using Configuration Manager After a fresh install or upgrade using the option Remove Dell Deployment ToolKit (DTK) utilities and Windows PE drivers, make sure that you import a DTK package before going ahead. For more information, see the Importing a DTK Package section for systems running Configuration Manager 2007 and Importing a DTK Package section for system running Configuration Manager Also, make sure that you have created distribution points and/or updated the appropriate packages to Configuration Manager distribution points. The Update Distribution Points operation ensures that all packages of the Dell Server Deployment Pack that you installed are updated on the distribution points. The Distribution operation ensures that the packages are available on the distribution points for the client systems to access them. To add a distribution point, see the Configuration Manager Online Help. Dell Server Deployment Pack provides consolidated launch points to various wizards to perform a typical server deployment. To access the wizards sequentially, right-click Operating System Deployment node and select Dell PowerEdge Server Deployment. You can use DSDP for Configuration Manager to perform the following tasks: Import a Dell Deployment ToolKit (DTK) Create Dell boot images for server deployment Import Dell driver packages from Dell Systems Management DVD Create an operating system deployment task sequence Recommended DTK version for Configuration Manager Configuration Manager 2007 SP1 DTK version 2.6 or later Configuration Manager 2007 SP2 DTK version or later Configuration Manager 2012 DTK version 4.0 7

8 8

9 Using The Dell Server Deployment Pack on Systems Running Configuration Manager This chapter will help you to use Dell Server Deployment Pack on systems running Configuration Manager 2012 Importing a DTK Package NOTE: By default, Dell Server Deployment Pack self extractable provides one DTK self extractable zip that is available in the extracted location. You may download another one from the Dell Support site at support.dell.com. To import a DTK Package: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Application Management Packages. 3. Right-click Packages and select Dell PowerEdge Server Deployment Launch Deployment Toolkit Configuration Wizard. The Deployment ToolKit Configuration Wizard screen is displayed. If there is an existing DTK package on the server, then the DTK version, Windows PE version, and architecture is displayed on the DTK present on system field. 4. Click Browse and select the DTK self extractable zip file that you downloaded. The selected DTK version, Windows PE version, and architecture is displayed under DTK selected for import field. 5. If there is no existing DTK package present on the server, or if the version selected is newer than the existing version, click Next. The Boot Image Property screen is displayed. NOTE: Dell Server Deployment Pack 2.0 does not support downgrading or reimporting the same version of DTK. 6. Refer step 3 to step 8 under the Creating a Boot Image for Deploying Dell PowerEdge Servers section for creating a boot image. Upgrading a DTK Package To upgrade a DTK package: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Application Management Packages. 3. Right-click Packages and select Dell PowerEdge Server Deployment Launch Deployment Toolkit Configuration Wizard. 9

10 The Deployment ToolKit Configuration Wizard screen is displayed. If there is an existing DTK package on the server, then the DTK version, Windows PE version, and architecture is displayed on the DTK present on system field. 4. Click Browse and select the updated DTK self extractable zip file that you downloaded. The selected DTK version, Windows PE version, and architecture is displayed under DTK selected for import field. 5. Click Next. The Boot Image Property screen is displayed. 6. Refer step 3 to step 8 under the Creating a Boot Image for Deploying Dell PowerEdge Servers section for creating a boot image. Creating a Boot Image for Deploying Dell PowerEdge Servers To create a Boot Images fro Deploying Dell PowerEdge Server: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Operating Systems Boot Images. 3. Right-click Boot Images and select Dell PowerEdge Server Deployment Create Dell Server Boot Image. 4. The following options are displayed in the Boot Image Selection screen: NOTE: Make sure that you import a 64-bit version of DTK before selecting x64 boot images in any of the following options. Use Boot Image from WAIK tools Use Existing Boot Image from Configuration Manager Use a Custom Boot Image Select this option to create both x64 and x86 Dell boot images. The source for the boot image creation is obtained from Windows Automated Installation Kit (WAIK) and all the Windows PE custom install packages are added to the boot image. This option allows you to select an existing boot image in Configuration Manager. Select the existing boot image from the drop-down list and use it to create a Dell boot image. Select this option to import a custom boot image from any other location. Specify the Universal Naming Convention (UNC) path of the Windows Imaging (WIM) file and select the boot image from the drop-down list. NOTE: Only finalized images are supported if you select the Use a Custom Boot Image option for Windows PE version 2.x. NOTE: The Windows PE custom boot image should have XML, Scripting, and WMI packages installed on it. For more information on how to install these packages, see the Microsoft Windows AIK documentation available on your system. 5. Click Next. The Boot Image Property screen is displayed. 6. Enter a name for the Dell boot image. The Version and Comments fields are optional. 7. Click Create. The boot image creation process begins. A progress bar shows the status of the boot image creation. Once the boot image is created, the boot image details is displayed on the Summary screen, DTK details, and success state. 8. Right-click each of the newly created boot images and perform the update and manage distribution points operations. NOTE: You can view the DTK configuration details only by using the Deployment ToolKit Configuration Wizard. 10

11 Distributing Content and Updating Distribution Points To update and manage distribution points: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Application Management Packages Dell PowerEdge Deployment. 3. Right-click PowerEdge Deployment Toolkit Integration and click Update Distribution Points. 4. Click OK to update the distribution points. 5. Right-click PowerEdge Deployment Toolkit Integration. Click Distribute Content. 6. The Distribute Content Wizard is displayed. Click Next and proceed through the wizard to manage the distribution points. (See the Configuration Manager Online Help or the Configuration Manager documentation for details.) 7. Go to Overview Boot Images Operating Systems. Right-click on the boot image that you created, and click Distribute Content. 8. The Distribute Content Wizard screen is displayed. Proceed through the wizard to manage the distribution points. 9. Repeat step 7 for all the other boot images that you created. Similarly, use the Distribute Content and Update Distribution Points wizard to update and manage the operating system images to distribution points. Importing Dell Server Driver Packages Dell Server Deployment Pack provides a wizard to create driver packages in Configuration Manager based on the server-operating system combination, out of the drivers available in the Dell Systems Management Tools and Documentation DVD. These packages are used in the task sequences that are used for operating system deployment. 1. Insert the Dell Systems Management Tools and Documentation DVD version 6.2 (or later) in your system drive. You can download the latest ISO image of the DVD from 2. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 3. From the left pane of the Configuration Manager console, select Software Library Overview Operating Systems Driver Packages. 4. Right-click Driver Packages, select Dell Server Driver Package Import Dell PowerEdge Server Driver Packages. The Dell PowerEdge Server Driver Package Import Wizard lists the DVD drives available on your server. Select the drive in which you inserted the DVD. Click Next. NOTE: If you have downloaded an ISO image, then create a physical disk or mount it on a virtual drive. 5. A list of the driver packages for a combination of the servers and operating systems is displayed. Select the required packages and click Finish. A progress bar displays the status of the import. After the import is complete, the import summary is displayed. NOTE: Sections involving importing of drivers may take more time without updating the progress bar. 6. Click Close. 7. To update and manage distribution points for the driver packages you imported, go to Driver Packages Dell PowerEdge Driver Packages <Dell OpenManage Version>. The driver packages window is displayed. 8. Right-click each of the newly imported driver packages and perform the distribute content and update distribution points operations. 11

12 Enabling Command Prompt for Debugging Boot Images NOTE: To display the debug console during deployment, press F8. To enable command prompt to debug boot images: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Operating Systems Boot Images. 3. Right-click on the boot image and select Properties. 4. In the Properties window, select Customization tab and select Enable Command Prompt (testing only) check box. 5. Click Apply, and proceed with distribute content and updating distribution points. For more information, see Distributing Content and Updating Distribution Points. Configuring your Servers Hardware Components Configure the various components of your server s hardware. Creating a Task Sequence You can create a task sequence to configure your server in two ways: Create a Dell-specific task sequence using PowerEdge Server Deployment template. Create a custom task sequence. Creating a Dell specific Task Sequence To create a Dell-specific task sequence using PowerEdge Server Deployment template: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Operating Systems Task Sequences. 3. Right-click Task Sequences, then click Bare Metal Server Deployment Create Dell PowerEdge Server Deployment Template. The Dell PowerEdge Server Deployment Task Sequence Wizard is displayed. 4. Enter the name of the task sequence in Task Sequence Name field. 5. Select the boot image to use from the drop-down list. NOTE: It is recommended that you use the Dell Custom boot image that you created. 6. Under Server Hardware Configuration select the hardware items that you want to configure in this task sequence. 7. Under Operating System Installation, select the operating system installation type. The options are: Use an OS WIM image Scripted OS install 8. Select an operating system package from the Operating system package to use drop-down menu. 12

13 9. If you have a package with unattend.xml, then select it from the Package with unattend.xml info menu. Else, select <do not select now>. 10. If Dell Lifecycle Controller Integration for Configuration Manager is installed on the server, then select the check box Apply Drivers from Dell Lifecycle Controller. For more information, see the Dell Lifecycle Controller Integration for Configuration Manager User s Guide. 11. Click Create. A confirmation message is displayed, click Close. Creating a Custom Task Sequence To create a custom task sequence: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Operating Systems Task Sequences. 3. Right click Task Sequences, then Create Task Sequence. The Create Task Sequence Wizard is displayed. 4. Select Create a new custom task sequence and click Next. 5. Enter name, version number, and comments for the task sequence. 6. Browse for the Dell boot image that you had created, and click Next. 7. The Confirm the Settings is displayed, review your settings and click Next. 8. A confirmation message is displayed, click Close. Editing a Task Sequence To edit a new task sequence or an existing task sequence: 1. Launch Configuration Manager by clicking Start All Programs Microsoft System Center 2012 Configuration Manager Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Software Library Overview Operating Systems Task Sequence. 3. Right-click the task sequence and click Edit. The Task Sequence Editor window is displayed. 4. Click Add Dell Deployment PowerEdge Server Configuration. This loads the custom action for your Dell server deployment. NOTE: When editing a task sequence for the first time, an error message Setup Windows and ConfigMgr is displayed, create and select the Configurations Manager Client Upgrade package to resolve the error. For more information creating packages, see the Configuration Manager 2012 documentation at technet.microsoft.com. You can now make changes to the task sequence accordingly. For more information on configuring task sequence actions like system BIOS, RAID, DRAC, and idrac, see Configuring Task Sequence Actions. Configuring Task Sequence Actions When you select PowerEdge Server Configuration from the Task Sequence Editor, the following tabs are displayed: Action Settings Variable Replacement 13

14 Logs/Return Files This section explains about the Action Settings tab. For information on Variable Replacement tab see, Variable Replacement. For information on Logs/Return Files tab, see Log/Return Files. Configuring your System BIOS To configure your system BIOS, 1. Right-click the task sequence and click Edit. 2. From the left hand side of the Task Sequence Editor, under Configure Hardware Step 1, click Set BIOS Config (ini file) Action Settings tab. 3. Select BIOS Config (ini file) from the Configuration action type: drop-down menu. NOTE: You can also select BIOS Config (command line) if you want configure system using the CLI option. This usage is beyond the scope of this document. See the Dell OpenManage Deployment ToolKit Command Line Interface Reference Guide on the Dell support site at for details. 4. Select Set from the Action: drop-down menu. The Configuration file/command line parameters field is enabled. For more information see, Configuration file/ Command line Parameter Options. Configuration file/command line Parameter Options There are three options you can choose from: <Create configuration file> <Import configuration file> Edit <syscfg.ini> CAUTION: When you update or save a new file in the package, it is not automatically updated on all of its distribution points. To make sure the new file is available to systems that need it, you must update the distribution points from the Software Distribution Packages Dell PowerEdge Deployment Dell PowerEdge Deployment ToolKit Integration <version> node. <Create configuration file> The Create button is displayed. 1. Click Create. 2. The Configuration File Editor is displayed with the following options: Import File: Click this button if you want to import an existing.ini file from a directory. You can also create an online.ini file in the Configuration File Editor field and click OK. This prompts you to save the.ini file you created to a local drive or network share of your choice. 3. If you select the Save these changes to the existing file in the toolkit package when I click OK option, your configuration is exported to a file when you click OK. <Import configuration file> The Import button is displayed. Click Import to import an existing.ini file. Edit <syscfg.ini> This is a sample BIOS.ini file. 14

15 1. Click View to see the existing syscfg.ini file. 2. In the Configuration File Editor window, you can edit the syscfg.ini file, select the Save these changes to the existing file in the toolkit package when I click OK option and click OK. After creating the.ini file using any of the preceding options listed, click Apply in the Task Sequence Editor window. The task sequence for Set BIOS Config (ini file) is created. Configuring Set Boot Order To add a new set boot order step to a task sequence: 1. Right-click the task sequence and click Edit. The Task Sequence Editor window is displayed. 2. Click Add Dell Deployment PowerEdge Server Configuration. This loads the custom action for your Dell server deployment. 3. Select the Configuration action type as Boot Order and Action as Set. 4. Under Configuration file/command line parameters, select --nextboot=virtualcd.slot.1. This sets the boot order to boot from a virtual CD. NOTE: See the Dell Deployment Toolkit CLI Guide for information on parameters for --nextboot option. Configuring RAID Using RAID Config (wizard) The RAID Config (wizard) allows you to either create a new configuration file or import an existing configuration to configure RAID on your systems. Now, let us say you want to configure RAID by creating a new configuration file using the RAID Config (wizard). From the left hand side of the Task Sequence Editor, under Configure Hardware Step 1, click Set RAID Config (wizard). Under Configuration file/command line parameters there are three options you can choose from: <Create configuration file> <Import configuration file> <sample.xml> <Create configuration file> 1. Select <Create configuration file> from the Configuration file / Command line parameters drop-down menu. 2. Click Create. The Array Builder wizard is displayed. For more information on the Array Builder see, Using the Array Builder. 3. Enter the configuration rule name in the Configuration Rule Name field. 4. Select the error handling rule from the drop-down menu. You can choose from: Fail the task if any controller does not match a configuration rule reports a failure if a rule cannot configure any of the detected controllers. Fail the task only if the first controller does not match a configuration rule - reports a failure if a rule cannot configure the first detected controller (usually the embedded controller). Fail the task if none of the array controllers match a configuration rule - reports a failure only if all of the controllers in the system fail to match a rule; in other words, none of the controllers are configured. <Import configuration file> 15

16 1. Select <Import configuration file> from the Configuration file/command line parameters drop-down menu. Click Import. 2. Specify the location of the configuration file you want to import and click Open. <sample.xml> 1. Select <sample.xml> from the Configuration file / Command line parameters drop-down menu. 2. Click View. The Array Builder wizard for the sample.xml is displayed. 3. To edit the sample.xml, see <Create configuration file>. Using the Array Builder Using Array Builder, you can define arrays/disk sets with all available RAID settings, logical drives/virtual disks of varying sizes or use all available space, and assign hot spares to individual arrays or assign global hot spares to the controller. How Array Builder Works When you run the task sequence on a target server, the array configuration utility detects the existing controller(s) on the server as well as the disks attached to each controller. The custom action then tries to match the physical configuration(s) the utility detected to the logical configurations you defined in the configuration rules. These array configuration rules are defined using a graphical, logical layout that allows you to visualize how your array controllers are configured. Rules are processed in the order displayed in the Array Builder tree, so you know exactly which rules have priority. You can define rules to match configurations based on detected slot number that the controller is in (or just the embedded controller, if any), how many disks are attached to the controller, or simply apply a blanket configuration to any controller the Array Builder finds. You can also apply configuration rules based on task sequence variables detected on the server. This allows you to define different configurations to different servers even if the detected hardware is identical. Controllers Controller elements contain variable condition elements. Controllers are one of several configuration types: The embedded controller A controller in slot "X" Any controller with "X" disks Any controller with "X" disks or more All remaining controllers When launching Array Builder from a <Create configuration file> selection in the deployment action, a default embedded controller is created. When a controller is created, a default variable condition, array and disk(s) are created to ensure a valid configuration. You can choose to leave the controller unconfigured - with disks set to non-raid, or you can add arrays or do other actions. Adding a Controller 16

17 1. To add a new controller, select a controller from the list, or select an embedded controller. The Controllers dropdown menu to your left is enabled. 2. Click Controllers New Controller. The Controller Configuration window is displayed. 3. Under Controller Selection Criteria, select from the following options: Select the controller located in slot Select any controller with <exactly, atleast> <number of> disks attached Select all remaining controllers in the system regardless of configuration Enter the slot number of the controller. Set a rule to select any controller which matches exactly, or at least the number of disks you have selected. Set a rule to select all remaining controllers in the system regardless of configuration 4. Under Variable Matching Criteria, you can set a rule to apply this configuration only if it matches certain criteria that you select. Select Apply this configuration only when variable to enable the rule setting options. 5. Click OK. Editing a Controller To edit a controller select the controller and click Controllers Edit Controller. On the Controller Configuration window you can make changes to your controller. Deleting a Controller 1. To delete a controller select the controller and click Controllers Delete Controller. You will receive a warning that all the attached arrays and disks are deleted. 2. Click Yes to delete or No to cancel. NOTE: On a server, you require at least one controller. If there is only one controller and you delete it, then a message that the default controller was inserted because the last controller was deleted is displayed. Variable Conditions To provide the ability to use the same hardware configuration in multiple logical configurations, variable evaluation is provided so that you can apply different configuration for arrays and logical drives to different situations. Variable condition elements contain arrays and global hot spares, and are of two types: No variables defined: This is the default configuration inserted with every controller, and you cannot remove or move it from last in the order. Variables defined: This is where any variable is compared to a value using one of the pre-defined operators. Adding a New Variable Condition To add a new variable condition under an embedded controller: 1. Expand Embedded Controller, and select [No variable conditions defined]. 2. Click Variables New Variable Condition. The Variable Condition Configuration window is displayed. 3. Under Variable Matching Criteria, you can set a rule to apply this variable only if it matches certain criteria that you select. 4. Click OK to apply the variable condition, or Cancel to return to Array Builder. Editing a Variable Condition To edit a variable condition: 17

18 1. Select the variable condition and click Variables Edit Variable Condition. The Variable Condition Configuration window you can make changes to your variable condition. 2. Click OK to apply the variable condition, or Cancel to return to Array Builder. Deleting a Variable Condition To delete a variable condition: 1. Select the variable condition and click Variables Delete Variable Condition. A message that all the attached arrays and disks are deleted is displayed. 2. Click Yes to delete or No to cancel. Arrays Array nodes include both RAID arrays and non-raid disk groups (indicated by the different icons for RAID arrays and non-raid disks). By default, a non-raid disk group is created when a controller is created. If the controller configuration specifies the number of disks required, then the same number of disks are added to the non-raid group. Arrays are added, modified or deleted depending on the controller configuration and number of disks available. Array elements contain logical drives and physical disks. Adding a New Array To add a new array under a variable condition: 1. Select a variable condition and click Arrays New Array. The Array Settings window is displayed. 2. Set the required RAID level from the Desired RAID Level drop-down menu. 3. Click OK to apply the array, or Cancel to return to Array Builder. Editing an Array To edit an array: 1. Select the array and click Arrays Edit Array. The Array Settings window is displayed. Here you can select a different RAID level for the array. 2. Click OK to apply the changes, or Cancel to return to Array Builder. Deleting an Array To delete an array: 1. Select the array and click Arrays Delete Array. A message that all the attached disks will be deleted is displayed. 2. Click Yes to delete or No to cancel. Logical Drives (also known as Virtual Disks) Logical drives are present on RAID arrays and non-raid groups. You can configure them by specifying the size (in GB) or to consume all available (or remaining) space in the array. By default, a single logical drive is created for all new arrays and is set to use all the available space. When specific-size logical drives are defined, the using all remaining space logical drive will consume any remaining space after other logical drive(s) are allocated their space on the array. NOTE: Array Builder does not support creating logical drives under Non-RAID groups. 18

19 NOTE: Cannot delete a logical drive under Non-RAID disks in Array Builder. Adding a New Logical Drive To add a new logical drive under an array: 1. Select the array and click Logical Drives New Logical Drive. The Logical Drive Settings window is displayed. 2. Under Create a logical drive enter the exact number of gigabytes the logical drive must contain. 3. Click OK to create the logical drive, or click Cancel to return to Array Builder. Editing a Logical Drive To edit a logical drive: 1. Select the logical drive and click Logical Drives Edit Logical Drive. The Logical Drive Settings window is displayed. Here you can change the size of the logical drive. 2. Click OK to apply the changes, or click Cancel to return to Array Builder. Deleting a Logical Drive To delete a logical drive 1. Select the logical drive and click Logical Drives Delete Logical Drive. A message to confirm the delete operation is displayed. 2. Click Yes to delete or No to cancel. Disks (also known as Array Disks) You can include disks as part of the arrays (or the non-raid disks node) and they are of the following types: Standard disks - these are the basic, non-defined disk type that make up the storage on arrays Hot Spares - these disks provide online redundancy if a RAID disk fails, and are assigned to a specific array. All Remaining Disks - these disks provide an option to define an array without specifying the exact number of disks in it. If the controller configuration specifies a number of disks required, then an equivalent number of disks are added to the non-raid group. If the controller specifies an exact quantity, then you cannot add or remove disks from the controller, you can move them from array to array (or the non-raid group). If the controller specifies a minimum number of disks, then you can add or remove disks, else you cannot remove disks below the lower limit of the controller configuration. Adding a New Disk To add a new disk to an array, select the array and click Disks New Disk. You can choose from the following: Single disk Multiple disks Hot spare (only for the current array) Global hot spare (all arrays) Changing a Disk To change a disk, click on the disk and select Disks Change Disk. 19

20 You can change a disk to: Standard disk Hot spare (only for the current array) Global hot spare (all arrays) Deleting a Disk To delete a disk, click on the disk and select Disks Delete Disk. Exporting to XML This menu item allows you to save the current configuration in an XML file to a location of your choice. To make sure that this configuration file is used, save it into the package. Else, the configuration is saved to a variable. To export the current configuration to an XML file, click Export to XML. Importing XML This menu item allows you to search for and import an existing Array Builder XML file. Format the XML file properly, else Configuration Manager automatically modifies the XML file and sends a notification of the change. To import an existing Array Builder XML file from another location, click Import XML. Saving to Package 1. Select the Save these changes to the existing file in the toolkit package when I click OK option. 2. Click OK. This enables you to save the configuration to an XML file. CAUTION: When you update or save a new file in the package, it is not automatically updated on all of its distribution points. To make sure that the new file is available to servers that need it, update the distribution points from the Software Distribution Packages Dell PowerEdge Deployment Dell PowerEdge Deployment ToolKit Integration <version> node. Creating Task Sequences for RAID, DRAC, and idrac From the Configuration action type menu you can select the options listed in following table to create task sequences for RAID, DRAC, and idrac. Option Suboptions Description RAID Configuration (.ini file) 5i-raid0.ini Sample file for RAID 0. 5i-raid1.ini Sample file for RAID 1. 5i-raid5.ini Sample file for RAID 5. raidcfg.ini Use the existing raidcfg.ini file to configure RAID. See <Edit syscfg.ini> for a similar example. 20

21 Option Suboptions Description iscsicfg.ini Use the existing iscsicfg.ini file to configure RAID. See <Edit syscfg.ini> for a similar example. RAID Configuration (command line) None Use this option if you want to manually configure the RAID tokens using the CLI. RAC Configuration (DRAC 5) <Create configuration file> See <Create configuration file> to see how you do it for the BIOS option. <Import configuration file> rac5cfg.ini See <Import configuration file>for the BIOS option. Use the existing rac5cfg.ini file to configure DRAC 5. See <Edit syscfg.ini> for a similar example. NOTE: Use DRAC configuration (DRAC5) to configure Integrated Dell Remote Access Controller (idrac) on Dell PowerEdge xx0x modular servers. idrac Configuration (idrac 6) <Create configuration file> See <Create configuration file> to see how you do it for the BIOS option. <Import configuration file> idrac6cfg.ini See <Import configuration file> for the BIOS option. Use the existing idrac6cfg.ini file to configure idrac 6. See <Edit syscfg.ini> for a similar example. idrac Configuration (idrac 7) <Create configuration file> See <Create configuration file> to see how you do it for the BIOS option. <Import configuration file> idrac7cfg.ini See <Import configuration file> for the BIOS option. Use the existing idrac7cfg.ini file to configure idrac 7. See <Edit syscfg.ini> for a similar example. Once you finish configuring the system BIOS, RAID, DRAC, and idrac, the hardware component sequences is displayed in the Task Sequence Editor. Variable Replacement The Variable Replacement tab allows you to use and configure task variables like: System Variables Task Sequence Variables Machine Variables 21

22 Collection Variables Configuring Variable Replacement Tab To configure the Variable Replacement Tab: 1. Under the Action to take when a variable is unintialized or the value is null or blank section you can: Use a null/blank value Fail the task Uses a variable that has not been initialized or has a blank value. This allows the clients to continue processing the action even if the variable is undefined or blank. Fails an action that cannot retrieve a valid variable value. This allows you to view what is wrong with an action instead of trying to debug a failed command line or a incorrectly configured system. 2. Select Search all text input files for variables to replace to enable client-side scripts to search for and replace variables in the command line or within files specified and replace them with values found in the task sequence environment or the Windows system environment. For optimum performance of the Action uncheck the Search all text input files for variables to replace check box. 3. Select Replace %PASSWORD% variables with this password to replace any instances of a password in the Actions with the password entered and confirmed in the dialog box. 4. Select Manually define additional variables to set additional variables on the system prior to a task running. To define the additional variables: a) Enter a variable Name. b) Enter the variable Value. c) Select the variable Type from the drop-down menu. 5. Click Apply and OK. Log / Return Files To retrieve the log files or capture configuration files: 1. Select Retrieve the task sequence log file from the client after this action runs. 2. Select Enable extended / debug logging by this action to get extensive information in the log files. 3. Select Retain network folder settings from a prior step, if available to copy any available network folder settings from the previous step or to configure the network folder settings proceed to step Provide a valid network/local path to save the file. 5. Provide the Domain and Account name to access the path. 6. Provide and confirm the password. 7. If you have specified a network path on step 4, then select Map a drive letter to the network share above and then select a drive letter from the drop-down menu. 8. Click Apply and OK. Configuring the Task Sequence Steps to Apply Operating System Image And Driver Package The scope of this document includes information only on the Dell Server Deployment Pack feature to apply operating system image and add Dell drivers. 22

23 Applying Operating System Image NOTE: Before you begin this task, make sure that you have the required operating system image file (.wim file) within the Operating System Images tree in Configuration Manager. To apply operating system image: 1. From the left-hand side of the Task Sequence Editor, under Deploy Operating System click Apply Operating System Image. 2. You can choose from the following options: Apply operating system from a captured image Apply operating system from an original installation source 3. Select the appropriate option and browse and select the operating system location and click OK. Adding Dell Driver Packages To add Dell driver packages: 1. From the left hand side of the Task Sequence Editor, under Deploy Operating System click Apply Driver Package. 2. Click Browse. The Select a Package window is displayed. 3. Click Dell PowerEdge Driver Packages<OM Version>. The list of driver packages available in the Dell Server Deployment Pack is displayed. 4. Select a package for a Dell PowerEdge server, say, Dell R720-Microsoft Windows 2008x86 OM Click Apply. NOTE: After operating system deployment, make sure that the mass-storage driver installed is same as that specified in the Task Sequence. If you find any differences, then update the driver manually. Advertising a Task Sequence After saving the task sequence, assign it to the collection of servers by advertising it. To advertise a task sequence: 1. Right-click on the task sequence and select Deploy. The Deploy Software Wizard window is displayed. 2. Refer the Configuration Manager Online Help on how to advertise a task sequence. NOTE: In the New Advertisement Wizard, check the option Make this task sequence available to boot media and Preboot Execution Environment (PXE). Best Practices for Advertising a Task Sequence Always configure advertisements with the following settings when using PXE: Make this task sequence available to boot media and PXE Distribution Points: Access content directly from a distribution point when needed by the running task sequence Interaction: Show task sequence progress Always configure Windows PE boot images with the following settings: Windows PE: Enable command support (testing only) 23

24 For the following packages, right-click and select Properties, click on the Data Access tab and select the Copy the Contents of this Package to a package share on distribution points check box, then click on the Distribution Settings tab and select the Automatically download content when packages are assigned to distribution points radio button. Dell PowerEdge Deployment Toolkit Integration 2.0 Configuration Manager Client Upgrade Package Boot images Operating System Images Driver Packages Deploying a Task Sequence Now that the task sequence is ready, use any of the following methods to deploy the task sequence you have created: Deploy through a CD Deploy through a USB Deploy through PXE For more information on how to deploy a task sequence using the preceding methods, see the Configuration Manager Online Help. 24

25 Using The Dell Server Deployment Pack on Systems Running Configuration Manager The chapter will help you to use Dell Server Deployment Pack on systems running Configuration Manager 2007 Importing a DTK Package NOTE: By default, Dell Server Deployment Pack self extractable provides one DTK self extractable zip that is available in the extracted location. You may download another one from the Dell Support site at support.dell.com. To import a DTK package and create a Dell boot image: 1. Launch Configuration Manager by clicking Start Microsoft System Center Configuration Manager 2007 Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Site Database Computer Management Software Distribution Packages Dell PowerEdge Server Deployment. 3. Right-click Dell PowerEdge Server Deployment and select Dell PowerEdge Server Deployment Launch Deployment ToolKit Configuration Wizard. The Deployment ToolKit Configuration Wizard screen is displayed. If there is an existing DTK package on the server, then the DTK version is displayed in the DTK Zip Details field. 4. Click Browse and select the DTK self extractable zip file that you downloaded. The selected DTK version, Windows PE version, and architecture is displayed under DTK Zip Details. 5. If there is no existing DTK package present in the server, or if the version selected is newer than the existing version, click Next. The Boot Image Property screen is displayed. NOTE: Dell Server Deployment Pack 2.0 does not support downgrading or reimporting the same version of DTK. 6. See step 3 to step 11 under the Creating a Boot Image for Deploying Dell PowerEdge Servers section for creating a boot image. Upgrading a DTK Package To upgrade a DTK package: 1. Launch Configuration Manager by clicking Start Microsoft System Center Configuration Manager 2007 Configuration Manager Console. The Configuration Manager Console screen is displayed. 2. From the left pane of the Configuration Manager console, select Site Database Computer Management Software Distribution Packages Dell PowerEdge Server Deployment. 3. Right-click Dell PowerEdge Server Deployment and select Dell PowerEdge Server Deployment Launch Deployment ToolKit Configuration Wizard. The Deployment ToolKit Configuration Wizard screen is displayed. The existing DTK version present on the server is displayed in the DTK Zip Details field. 25

Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User's Guide

Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User's Guide Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User's Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better

More information

Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User's Guide

Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User's Guide Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User's Guide Messaggi di N.B., Attenzione e Avvertenza N.B.: Un messaggio di N.B. indica informazioni importanti

More information

Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager. User's Guide

Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager. User's Guide Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager User's Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make

More information

Lifecycle Controller with Dell Repository Manager

Lifecycle Controller with Dell Repository Manager Lifecycle Controller with Dell Repository Manager Dell, Inc. Dell Repository Manager Team Chandrasekhar G Dell Engineering October 2013 A Dell Technical White Paper Revisions Date October 2013 Description

More information

Dell Server Management Pack Suite Version For Microsoft System Center Operations Manager And System Center Essentials Installation Guide

Dell Server Management Pack Suite Version For Microsoft System Center Operations Manager And System Center Essentials Installation Guide Dell Server Management Pack Suite Version 5.0.1 For Microsoft System Center Operations Manager And System Center Essentials Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important

More information

Dell Server PRO Management Pack 3.0 for Microsoft System Center Virtual Machine Manager Installation Guide

Dell Server PRO Management Pack 3.0 for Microsoft System Center Virtual Machine Manager Installation Guide Dell Server PRO Management Pack 3.0 for Microsoft System Center Virtual Machine Manager Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make

More information

Dell PowerVault Network Attached Storage (NAS) Systems Running Windows Storage Server 2012 Troubleshooting Guide

Dell PowerVault Network Attached Storage (NAS) Systems Running Windows Storage Server 2012 Troubleshooting Guide Dell PowerVault Network Attached Storage (NAS) Systems Running Windows Storage Server 2012 Troubleshooting Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you

More information

LSI SAS i PCIe to 6Gb/s SAS HBA Running On Dell Systems Important Information

LSI SAS i PCIe to 6Gb/s SAS HBA Running On Dell Systems Important Information LSI SAS 9207-8i PCIe to 6Gb/s SAS HBA Running On Dell Systems Important Information CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

More information

Dell Server PRO Management Pack for Microsoft System Center Virtual Machine Manager Installation Guide

Dell Server PRO Management Pack for Microsoft System Center Virtual Machine Manager Installation Guide Dell Server PRO Management Pack 3.0.1 for Microsoft System Center Virtual Machine Manager Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make

More information

Using Lifecycle Controller to Configure UEFI Secure Boot and OS Deployment

Using Lifecycle Controller to Configure UEFI Secure Boot and OS Deployment Using Lifecycle Controller to Configure UEFI Secure Boot and OS Deployment This Dell technical white paper describes the capabilities of using Lifecycle Controller to configure UEFI Secure Boot and OS

More information

Using Dell Repository Manager with Dell OpenManage Essentials

Using Dell Repository Manager with Dell OpenManage Essentials Using Dell Repository Manager with Dell OpenManage Essentials Dell, Inc. Dell Repository Manager Team AVS Sashi Kiran December 2013 A Dell Technical White Paper Revisions Date December 2013 Description

More information

Dell EqualLogic Storage Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And Microsoft System Center Essentials

Dell EqualLogic Storage Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And Microsoft System Center Essentials Dell EqualLogic Storage Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And Microsoft System Center Essentials Installation Guide Notes, Cautions, and Warnings NOTE: A

More information

Dell SupportAssist Version 1.2 For Dell OpenManage Essentials Support Matrix

Dell SupportAssist Version 1.2 For Dell OpenManage Essentials Support Matrix Dell SupportAssist Version 1.2 For Dell OpenManage Essentials Support Matrix Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A

More information

Dell Reseller Option Kit Important Information

Dell Reseller Option Kit Important Information Dell Reseller Option Kit Important Information Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either

More information

Shared LOM support on Modular

Shared LOM support on Modular Dell Engineering February 2015 Author(s): Rajeswari Ayyaswamy Bala Nagaiah A Dell Technical White Paper THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL

More information

Dell Repository Manager Version 1.8 Troubleshooting Guide

Dell Repository Manager Version 1.8 Troubleshooting Guide Dell Repository Manager Version 1.8 Troubleshooting Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

SUU Supporting the DUP Dependency

SUU Supporting the DUP Dependency SUU Supporting the DUP Dependency Server Update Utility (SUU) is a tool for updating Dell servers, which is now enhanced to identify and apply the depdencies during the updates. Dell Update Packages (DUP)s

More information

Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager. Installation Guide

Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager. Installation Guide Dell EMC Server Deployment Pack Version 4.0 for Microsoft System Center Configuration Manager Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you

More information

Dell Server Management Pack Suite Version For Microsoft System Center Operations Manager And System Center Essentials User s Guide

Dell Server Management Pack Suite Version For Microsoft System Center Operations Manager And System Center Essentials User s Guide Dell Server Management Pack Suite Version 5.0.1 For Microsoft System Center Operations Manager And System Center Essentials User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information

More information

Dell Server Deployment Pack Version 3.1 for Microsoft System Center Configuration Manager Installation Guide

Dell Server Deployment Pack Version 3.1 for Microsoft System Center Configuration Manager Installation Guide Dell Server Deployment Pack Version 3.1 for Microsoft System Center Configuration Manager Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make

More information

Release Notes. Dell Server Management Pack Suite For CPS. Version 5.1.1

Release Notes. Dell Server Management Pack Suite For CPS. Version 5.1.1 Release Notes Dell Server Management Pack Suite For CPS The Dell Server Management Pack Suite for Microsoft System Center 2012 R2 Operations Manager, Microsoft System Center 2012 SP1 Operations Manager,

More information

OpenManage Integration for VMware vcenter Using the vsphere Client Quick Install Guide Version 2.0

OpenManage Integration for VMware vcenter Using the vsphere Client Quick Install Guide Version 2.0 OpenManage Integration for VMware vcenter Using the vsphere Client Quick Install Guide Version 2.0 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better

More information

Access Control Policies

Access Control Policies Access Control Policies The new feature within EqualLogic firmware 7.0 that enables centralized management of access controls for volume access. Dell Engineering January 2014 A Dell Technical White Paper

More information

Dell Appliance for Wyse

Dell Appliance for Wyse Dell Appliance for Wyse Deployment Rollback Process Dell Wyse Solutions Engineering July 2015 Revisions Date Description July 2015 Release 1.0 2015 Dell Inc. All rights reserved. Reproduction of this material

More information

Lifecycle Controller 2 Release 1.0 Version Readme

Lifecycle Controller 2 Release 1.0 Version Readme Lifecycle Controller 2 Release 1.0 Version 1.0.8 Readme Lifecycle Controller 2 GUI provides advanced embedded systems management and is delivered as part of Integrated Dell(R) Remote Access Controller

More information

Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager Installation Guide

Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager Installation Guide Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make

More information

Dell OptiPlex SFF AIO Stand. User s Guide. Model: IKAIO-01 1 /13

Dell OptiPlex SFF AIO Stand. User s Guide. Model: IKAIO-01 1 /13 Dell OptiPlex SFF AIO Stand User s Guide Model: IKAIO-01 1 /13 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Dell SupportAssist Version For Dell OpenManage Essentials Quick Start Guide

Dell SupportAssist Version For Dell OpenManage Essentials Quick Start Guide Dell SupportAssist Version 1.2.1 For Dell OpenManage Essentials Quick Start Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.

More information

Dell Repository Manager Data Center Version 1.7 User s Guide

Dell Repository Manager Data Center Version 1.7 User s Guide Dell Repository Manager Data Center Version 1.7 User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Dell SupportAssist Version 1.2 For Dell OpenManage Essentials Quick Start Guide

Dell SupportAssist Version 1.2 For Dell OpenManage Essentials Quick Start Guide Dell SupportAssist Version 1.2 For Dell OpenManage Essentials Quick Start Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.

More information

Setting Up Replication between Dell DR Series Deduplication Appliances with NetVault 9.2 as Backup Software

Setting Up Replication between Dell DR Series Deduplication Appliances with NetVault 9.2 as Backup Software Setting Up Replication between Dell DR Series Deduplication Appliances with NetVault 9.2 as Backup Software Dell Engineering A Dell Technical White Paper Revisions Date Description Initial release THIS

More information

Dell 1741M Converged Network Adapter FCoE Boot from SAN Guide

Dell 1741M Converged Network Adapter FCoE Boot from SAN Guide Dell 1741M Converged Network Adapter FCoE Boot from SAN Guide Dell Engineering July 2014 A Dell Deployment and Configuration Guide Revisions Date Description Authors July 2014 Initial release Neal Beard,

More information

Dell EqualLogic Storage Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And System Center Essentials User s Guide

Dell EqualLogic Storage Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And System Center Essentials User s Guide Dell EqualLogic Storage Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And System Center Essentials User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important

More information

Dell Lifecycle Controller Integration For Microsoft System Center Configuration Manager Version Installation Guide

Dell Lifecycle Controller Integration For Microsoft System Center Configuration Manager Version Installation Guide Dell Lifecycle Controller Integration For Microsoft System Center Configuration Manager Version 2.0.1 Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that

More information

Dell PowerVault MD Storage Array Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And Microsoft System Center

Dell PowerVault MD Storage Array Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And Microsoft System Center Dell PowerVault MD Storage Array Management Pack Suite Version 5.0 For Microsoft System Center Operations Manager And Microsoft System Center Essentials User's Guide Notes, Cautions, and Warnings NOTE:

More information

Management Station Software Version 7.3 Installation Guide

Management Station Software Version 7.3 Installation Guide Management Station Software Version 7.3 Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Configuring Direct-Connect between a DR Series System and Backup Media Server

Configuring Direct-Connect between a DR Series System and Backup Media Server Configuring Direct-Connect between a DR Series System and Backup Media Server Dell Engineering October 2014 A Dell Technical White Paper Revisions Date October 2014 Description Initial release THIS WHITE

More information

Active Fabric Manager Installation Guide 1.5

Active Fabric Manager Installation Guide 1.5 Active Fabric Manager Installation Guide 1.5 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either

More information

Dell PowerEdge T620 Getting Started Guide

Dell PowerEdge T620 Getting Started Guide Dell PowerEdge T620 Getting Started Guide Regulatory Model: E17S Series Regulatory Type: E17S001 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use

More information

Deploying Solaris 11 with EqualLogic Arrays

Deploying Solaris 11 with EqualLogic Arrays Deploying Solaris 11 with EqualLogic Arrays Step-by-step guide to integrating an Oracle Solaris 11 server with a Dell EqualLogic PS Series Array Dell Storage Engineering February 2014 A Dell Deployment

More information

Dell Wyse Datacenter for VMware Horizon View Cloud Pod Architecture

Dell Wyse Datacenter for VMware Horizon View Cloud Pod Architecture Dell Wyse Datacenter for VMware Horizon View Cloud Pod Architecture A brief guide for the configuration and management of a Cloud Pod environment. Dell Wyse Solutions Engineering May 2014 A Dell Technical

More information

Dell Lifecycle Controller Integration Version 2.2 For Microsoft System Center Configuration Manager User's Guide

Dell Lifecycle Controller Integration Version 2.2 For Microsoft System Center Configuration Manager User's Guide Dell Lifecycle Controller Integration Version 2.2 For Microsoft System Center Configuration Manager User's Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you

More information

Dell Lifecycle Controller Integration Version 3.0 For Microsoft System Center Configuration Manager User's Guide

Dell Lifecycle Controller Integration Version 3.0 For Microsoft System Center Configuration Manager User's Guide Dell Lifecycle Controller Integration Version 3.0 For Microsoft System Center Configuration Manager User's Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you

More information

Active Fabric Manager. Release Notes 1.5. June 2013

Active Fabric Manager. Release Notes 1.5. June 2013 Active Fabric Manager Release Notes 1.5 June 2013 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates

More information

Dell PowerEdge T620 Getting Started Guide

Dell PowerEdge T620 Getting Started Guide Dell PowerEdge T620 Getting Started Guide Regulatory Model: E17S Series Regulatory Type: E17S001 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use

More information

Teradici APEX 2800 for VMware Horizon View

Teradici APEX 2800 for VMware Horizon View Teradici APEX 2800 for VMware Horizon View Performance characteristics of the Teradici APEX 2800 in a VMware Horizon View environment Dell Wyse Solutions Engineering February 2014 A Dell Technical White

More information

Dell PowerEdge R720 and R720xd Getting Started Guide

Dell PowerEdge R720 and R720xd Getting Started Guide Dell PowerEdge R720 and R720xd Getting Started Guide Regulatory Model: E14S Series Regulatory Type: E14S001 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make

More information

Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

Dell OpenManage Deployment Toolkit Version 4.3 User's Guide Dell OpenManage Deployment Toolkit Version 4.3 User's Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Dell PowerEdge T420 Getting Started Guide

Dell PowerEdge T420 Getting Started Guide Dell PowerEdge T420 Getting Started Guide Regulatory Model: E20S Series Regulatory Type: E20S001 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use

More information

Dell Fabric Manager Deployment Guide 1.0.0

Dell Fabric Manager Deployment Guide 1.0.0 Dell Fabric Manager Deployment Guide 1.0.0 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either

More information

Web Service Eventing Support for Hardware Inventory and Monitoring

Web Service Eventing Support for Hardware Inventory and Monitoring Web Service Eventing Support for Hardware Inventory and Monitoring Dell Engineering January 2015 Hari Venkatachalam Chitrak Gupta 1 White Paper Web Service Eventing Support for Hardware Inventory and Monitoring

More information

FluidFS Antivirus Integration

FluidFS Antivirus Integration FluidFS Antivirus Integration Dell Storage Engineering May 2014 A Dell Technical Whitepaper Revisions Date May 2014 Description Initial release THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND

More information

Installing Dell OpenManage 4.5 Software in a VMware ESX Server Software 2.5.x Environment

Installing Dell OpenManage 4.5 Software in a VMware ESX Server Software 2.5.x Environment Installing Dell OpenManage 4.5 Software in a VMware ESX Server Software 2.5.x Environment Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your

More information

Dell PowerVault MD3400/3420/3800i/3820i/ 3800f/3820f Storage Arrays Getting Started Guide

Dell PowerVault MD3400/3420/3800i/3820i/ 3800f/3820f Storage Arrays Getting Started Guide Dell PowerVault MD3400/3420/3800i/3820i/ 3800f/3820f Storage Arrays Getting Started Guide Regulatory Model: E03J and E04J Series Regulatory Type: E03J001 and E04J001 Notes, Cautions, and Warnings NOTE:

More information

Dell PowerVault MD3460/3860i/3860f Storage Arrays Getting Started Guide

Dell PowerVault MD3460/3860i/3860f Storage Arrays Getting Started Guide Dell PowerVault MD3460/3860i/3860f Storage Arrays Getting Started Guide Regulatory Model: E08J Series Regulatory Type: E08J001 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information

More information

Remote Power Management of Dell PowerEdge M1000e with Chassis Management Controller (CMC) Using Windows Remote Management (WinRM)

Remote Power Management of Dell PowerEdge M1000e with Chassis Management Controller (CMC) Using Windows Remote Management (WinRM) Remote Power Management of Dell PowerEdge M1000e with Chassis Management Controller (CMC) Using A Dell Technical White Paper Author Lucky P Khemani Dell Engineering September 2013 A Dell Choose an item.

More information

Dell Lifecycle Controller Integration For Microsoft System Center Configuration Manager Version User's Guide

Dell Lifecycle Controller Integration For Microsoft System Center Configuration Manager Version User's Guide Dell Lifecycle Controller Integration For Microsoft System Center Configuration Manager Version 2.0.1 User's Guide Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG liefert wichtige

More information

Dell Lifecycle Controller Integration Version 3.1 For Microsoft System Center Configuration Manager User's Guide

Dell Lifecycle Controller Integration Version 3.1 For Microsoft System Center Configuration Manager User's Guide Dell Lifecycle Controller Integration Version 3.1 For Microsoft System Center Configuration Manager User's Guide Messaggi di N.B., Attenzione e Avvertenza N.B.: Un messaggio di N.B. indica informazioni

More information

VMware Infrastructure Update 1 for Dell PowerEdge Systems. Deployment Guide. support.dell.com

VMware Infrastructure Update 1 for Dell PowerEdge Systems. Deployment Guide.   support.dell.com VMware Infrastructure 3.0.2 Update 1 for Dell PowerEdge Systems Deployment Guide www.dell.com support.dell.com Notes and Notices NOTE: A NOTE indicates important information that helps you make better

More information

Dell Networking MXL and PowerEdge I/O Aggregator with Cisco Nexus 5000 series fabric mode Config Sheets

Dell Networking MXL and PowerEdge I/O Aggregator with Cisco Nexus 5000 series fabric mode Config Sheets Dell Networking MXL and PowerEdge I/O Aggregator with Cisco Nexus 5000 series fabric mode Config Sheets CLI Config Sheets Dell Networking Engineering November 2013 A Dell Deployment and Configuration Guide

More information

Optimizing I/O Identity and Applying Persistence Policy on Network and Fibre Channel Adapters

Optimizing I/O Identity and Applying Persistence Policy on Network and Fibre Channel Adapters Optimizing I/O Identity and Applying Persistence Policy on Network and Fibre Channel Adapters This white paper explains how to achieve optimized I/O Identity on the 13 th generation Dell PowerEdge servers.

More information

Dell Networking MXL / PowerEdge I/O Aggregator with Cisco Nexus 5000 series NPV mode and Cisco MDS 9100 fabric switch Config Sheets

Dell Networking MXL / PowerEdge I/O Aggregator with Cisco Nexus 5000 series NPV mode and Cisco MDS 9100 fabric switch Config Sheets Dell Networking MXL / PowerEdge I/O Aggregator with Cisco Nexus 5000 series NPV mode and Cisco MDS 9100 fabric switch Config Sheets CLI Config Sheets Dell Networking Engineering November 2013 A Dell Deployment

More information

Dell Lifecycle Controller Integration Version for Microsoft System Center 2012 Virtual Machine Manager Installation Guide

Dell Lifecycle Controller Integration Version for Microsoft System Center 2012 Virtual Machine Manager Installation Guide Dell Lifecycle Controller Integration Version 1.0.1 for Microsoft System Center 2012 Virtual Machine Manager Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information

More information

Deployment of Dell M6348 Blade Switch with Cisco 4900M Catalyst Switch (Simple Mode)

Deployment of Dell M6348 Blade Switch with Cisco 4900M Catalyst Switch (Simple Mode) Deployment of Dell M6348 Blade Switch with Cisco 4900M Catalyst Switch (Simple Mode) Dell Networking Solutions Engineering July 2011 A Dell EMC Deployment and Configuration Guide Revisions Date Description

More information

VMware Infrastructure Update 1 for Dell PowerEdge Systems. Deployment Guide. support.dell.com

VMware Infrastructure Update 1 for Dell PowerEdge Systems. Deployment Guide.   support.dell.com VMware Infrastructure 3.0.2 Update 1 for Dell Systems Deployment Guide www.dell.com support.dell.com Notes and Notices NOTE: A NOTE indicates important information that helps you make better use of your

More information

Microsoft Windows Server 2012 Early Adopter Guide

Microsoft Windows Server 2012 Early Adopter Guide Microsoft Windows Server 2012 Early Adopter Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates

More information

Dell OpenManage IT Assistant Version 8.9. User s Guide

Dell OpenManage IT Assistant Version 8.9. User s Guide Dell OpenManage IT Assistant Version 8.9 User s Guide Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential

More information

OpenManage Integration for VMware vcenter for Desktop Client User's Guide Version 2.1

OpenManage Integration for VMware vcenter for Desktop Client User's Guide Version 2.1 OpenManage Integration for VMware vcenter for Desktop Client User's Guide Version 2.1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.

More information

Dell EMC Repository Manager Version 3.1. Troubleshooting Guide

Dell EMC Repository Manager Version 3.1. Troubleshooting Guide Dell EMC Repository Manager Version 3.1 Troubleshooting Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION

More information

Lenovo Deployment Pack for Microsoft System Center Configuration Manager Installation and User's Guide

Lenovo Deployment Pack for Microsoft System Center Configuration Manager Installation and User's Guide Lenovo Deployment Pack for Microsoft System Center Configuration Manager Installation and User's Guide Version 6.3 Note Before using this information and the product it supports, read the information in

More information

Scheduled Automatic Search using Dell Repository Manager

Scheduled Automatic Search using Dell Repository Manager Scheduled Automatic Search using Dell Repository Manager A Dell Technical White Paper Dell, Inc. Dell Repository Manager Team THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL

More information

Understanding Discovery and Inventory of Dell Devices

Understanding Discovery and Inventory of Dell Devices Understanding Discovery and Inventory of Dell Devices R Rajiv Nair Ashish Suyal Dell Product Group Enterprise This document is for informational purposes only and may contain typographical errors and technical

More information

Dell EMC PowerEdge Systems SUSE Linux Enterprise Server 15. Installation Instructions and Important Information

Dell EMC PowerEdge Systems SUSE Linux Enterprise Server 15. Installation Instructions and Important Information Dell EMC PowerEdge Systems SUSE Linux Enterprise Server 15 Installation Instructions and Important Information Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you

More information

Dell Repository Manager Data Center Version 2.0 User s Guide

Dell Repository Manager Data Center Version 2.0 User s Guide Dell Repository Manager Data Center Version 2.0 User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Dell Lifecycle Controller Integration Version for Microsoft System Center 2012 Virtual Machine Manager User s Guide

Dell Lifecycle Controller Integration Version for Microsoft System Center 2012 Virtual Machine Manager User s Guide Dell Lifecycle Controller Integration Version 1.0.1 for Microsoft System Center 2012 Virtual Machine Manager User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that

More information

Dell Repository Manager Version 2.1 Troubleshooting Guide

Dell Repository Manager Version 2.1 Troubleshooting Guide Dell Repository Manager Version 2.1 Troubleshooting Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION

More information

Reinstalling the Operating System on the Dell PowerVault 745N

Reinstalling the Operating System on the Dell PowerVault 745N Reinstalling the Operating System on the Dell PowerVault 745N This document details the following steps to reinstall the operating system on a PowerVault 745N system: 1. Install the Reinstallation Console

More information

Dell Systems Management Software Support Matrix Version 6.5

Dell Systems Management Software Support Matrix Version 6.5 Systems Management Software Support Matrix 6.5 Introduction Supported Browsers Supported OpenManage Systems Management Software Network Interface Controllers and Supported Operating Systems Supported OpenManage

More information

Simplifying Blade Server Update with Dell Repository Manager

Simplifying Blade Server Update with Dell Repository Manager Simplifying Blade Server Update with Dell Repository Manager Dell Engineering December 2015 A Dell Technical White Paper Revisions Date December 2015 Description Initial release THIS WHITE PAPER IS FOR

More information

Dell EMC OpenManage Deployment Toolkit Version Installation Guide

Dell EMC OpenManage Deployment Toolkit Version Installation Guide Dell EMC OpenManage Deployment Toolkit Version 6.0.1 Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION:

More information

Using Dell Repository Manager to Create a Deployment Media (Bootable ISO) to Perform Systems Updates

Using Dell Repository Manager to Create a Deployment Media (Bootable ISO) to Perform Systems Updates Using Dell Repository Manager to Create a Deployment Media (Bootable ISO) to Perform Systems This Dell Technical White Paper addresses how to leverage configuration scripts while updating Dell servers.

More information

Dell PowerEdge 6 Gbps SAS HBA and Internal Tape Adapter. User s Guide

Dell PowerEdge 6 Gbps SAS HBA and Internal Tape Adapter. User s Guide Dell PowerEdge 6 Gbps SAS HBA and Internal Tape Adapter User s Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION:

More information

Wired + Wireless Cloud-managed Campus Reference Architecture

Wired + Wireless Cloud-managed Campus Reference Architecture Wired + Wireless Cloud-managed Campus Reference Architecture Dell Networking Solutions Engineering September 2016 A Dell EMC Reference Architecture Revisions Date Description Authors September 2016 v1.0

More information

Running Milestone XProtect with the Dell FS8600 Scale-out File System

Running Milestone XProtect with the Dell FS8600 Scale-out File System Running Milestone XProtect with the Dell FS8600 Scale-out File System Dell Storage Engineering January 2015 A Dell Reference Architecture Revisions Date January 2015 Description Initial release THIS WHITE

More information

Using Dell Repository Manager to Manage Your Repositories Efficiently

Using Dell Repository Manager to Manage Your Repositories Efficiently Using Dell Repository Manager to Manage Your Repositories Efficiently A Dell Technical White Paper Dell Inc. Dell Repository Manager Team i THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY

More information

Dell EMC OpenManage Deployment Toolkit Version 6.1. Installation Guide

Dell EMC OpenManage Deployment Toolkit Version 6.1. Installation Guide Dell EMC OpenManage Deployment Toolkit Version 6.1 Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION:

More information

Dell Smart Plug-in Version 4.0 For HP Operations Manager 9.0 For Microsoft Windows Installation Guide

Dell Smart Plug-in Version 4.0 For HP Operations Manager 9.0 For Microsoft Windows Installation Guide Dell Smart Plug-in Version 4.0 For HP Operations Manager 9.0 For Microsoft Windows Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better

More information

Compatibility Matrix for VMware Infrastructure 3 and Dell PowerEdge Systems

Compatibility Matrix for VMware Infrastructure 3 and Dell PowerEdge Systems VMware VMotion and 64-Bit Virtual Machine Compatibility Matrix for VMware Infrastructure 3 and Dell PowerEdge Systems www.dell.com support.dell.com Notes and Cautions NOTE: A NOTE indicates important information

More information

VMware Infrastructure 3.5 for Dell PowerEdge Systems. Deployment Guide. support.dell.com

VMware Infrastructure 3.5 for Dell PowerEdge Systems. Deployment Guide.   support.dell.com VMware Infrastructure 3.5 for Dell PowerEdge Systems Deployment Guide www.dell.com support.dell.com Notes and Notices NOTE: A NOTE indicates important information that helps you make better use of your

More information

Deployment of Dell M8024-k Blade Switch in Simple Mode with Cisco Nexus 5k Switch

Deployment of Dell M8024-k Blade Switch in Simple Mode with Cisco Nexus 5k Switch Deployment of Dell M8024-k Blade Switch in Simple Mode with Cisco Nexus 5k Switch Dell Networking Solutions Engineering August 2011 A Dell EMC Interoperability Whitepaper Revisions Date Description Authors

More information

IBM Endpoint Manager. OS Deployment V3.5 User's Guide

IBM Endpoint Manager. OS Deployment V3.5 User's Guide IBM Endpoint Manager OS Deployment V3.5 User's Guide IBM Endpoint Manager OS Deployment V3.5 User's Guide Note Before using this information and the product it supports, read the information in Notices

More information

Dell OpenManage Port Information Guide Version 7.2

Dell OpenManage Port Information Guide Version 7.2 Dell OpenManage Port Information Guide Version 7.2 tes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates

More information

Systems Management Tools And Documentation Version 8.3 Installation Guide

Systems Management Tools And Documentation Version 8.3 Installation Guide Systems Management Tools And Documentation Version 8.3 Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION:

More information

IBM Deployment Pack for Microsoft System Center Configuration Manager 2007 Installation and User s Guide

IBM Deployment Pack for Microsoft System Center Configuration Manager 2007 Installation and User s Guide IBM System x IBM Deployment Pack for Microsoft System Center Configuration Manager 2007 Installation and User s Guide Version 1.0 IBM System x IBM Deployment Pack for Microsoft System Center Configuration

More information

Dell OpenManage Deployment Toolkit Version 5.3 Installation Guide

Dell OpenManage Deployment Toolkit Version 5.3 Installation Guide Dell OpenManage Deployment Toolkit Version 5.3 Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A

More information

Dell Server PRO Management Pack 3.0 for Microsoft System Center Virtual Machine Manager User's Guide

Dell Server PRO Management Pack 3.0 for Microsoft System Center Virtual Machine Manager User's Guide Dell Server PRO Management Pack 3.0 for Microsoft System Center Virtual Machine Manager User's Guide Notes, Cautions, and s NOTE: A NOTE indicates important information that helps you make better use of

More information

Dell Client System Update Version 1.0. User s Guide

Dell Client System Update Version 1.0. User s Guide Dell Client System Update Version 1.0 User s Guide Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential

More information

VMware Virtual Infrastructure 3.x Software for Dell PowerEdge Systems. Release Notes. support.dell.com

VMware Virtual Infrastructure 3.x Software for Dell PowerEdge Systems. Release Notes.  support.dell.com VMware Virtual Infrastructure 3.x Software for Dell PowerEdge Systems Release Notes www.dell.com support.dell.com Notes and Notices NOTE: A NOTE indicates important information that helps you make better

More information

VMware ESX Server Software for Dell PowerEdge Servers. Deployment Guide. support.dell.com

VMware ESX Server Software for Dell PowerEdge Servers. Deployment Guide.   support.dell.com VMware ESX Server 2.5.1 Software for Dell PowerEdge Servers Deployment Guide www.dell.com support.dell.com VMware ESX Server 2.5.1 Software for Dell PowerEdge Servers Deployment Guide www.dell.com support.dell.com

More information

Dell EMC Systems Management Tools And Documentation Installation Guide. Version 9.1

Dell EMC Systems Management Tools And Documentation Installation Guide. Version 9.1 Dell EMC Systems Management Tools And Documentation Installation Guide Version 9.1 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product.

More information