Q-Stress 4.6 Software Installation & Upgrade

Size: px
Start display at page:

Download "Q-Stress 4.6 Software Installation & Upgrade"

Transcription

1 Q-Stress 4.6 Software Installation & Upgrade REF ENG Rev A1 Contents Scope 1 Software Installation 3 Software Upgrade 5 Configure Operating System Parameters 7 Stress Application Configuration 15 Troubleshooting a Failed Installation 16 Restoring the HP rp5800 PC 17 Manufactured by Mortara Instrument, Inc., Milwaukee, Wisconsin U.S.A. CAUTION: Federal law restricts this device to sale by or on the order of a physician.

2 Copyright All rights reserved. By Mortara Instrument, Inc N. 86th Street Milwaukee, WI U.S.A. Tel: Fax: Service: Information in this document is subject to change without notice. Names and data used in the examples are fictitious unless otherwise noted. CE Mark Declaration The CE marking of conformity indicates that the device having this symbol on its immediate label meets the applicable requirements of the European Medical Device Directive. Trademark Information Quinton, Burdick, HeartCentrix Mortara, Q-Exchange, and Q-Stress are trademarks or registered trademarks of Mortara Instrument, Inc. All other product and company names are trademarks or registered trademarks of their respective companies.

3 Scope This document contains instructions for a new installation of Q-Stress 4.6 and an upgrade of an existing system to version 4.6. These instructions assume that Microsoft Windows has already been installed on your Stress computer. Make sure the monitor display settings are set to 1024 x 768 resolution and 32-bit color. Read all instructions before beginning the installation or upgrade process. Follow the instructions in the order given. If you have any questions about these instructions, contact technical support at: techsupport@mortara.com 1

4 2 SCOPE

5 Software Installation Important: This installation must be performed with an Administrator account. 1. Insert the Q-Stress 4.6 Installation Disk into the DVD drive. The installation wizard starts automatically. If the Auto Play message appears, select run Setup.exe. If prompted, click Continue in the User Account Control dialog box. 2. Click Next > at the welcome screen. 3. Select the radio button to accept the license agreement and click Next >. 4. Change the installation location if desired using the Change button and click Next >. 5. Click Install. The installation wizard begins installing the Stress software. 6. Click Yes to install Microsoft KB hot fix, if prompted, and then Close when Installation is complete. 3

6 SOFTWARE INSTALLATION 7. Click Next to install the CP210x USB to UART Bridge Driver Installer, if prompted, and accept the license agreement. Click Finish when done. 8. Install the TCR 1000 printer driver. If prompted, click Install this driver software anyway: 9. Click Finish to complete the installation. 10. Restart the computer. Continue with Configure Operating System Parameters on page 7. 4

7 Software Upgrade Follow these directions to upgrade a Stress version 4.x system to version 4.6. Important: This installation must be performed with an Administrator account. Important: Backup the Stress database before starting the upgrade process. See the User Guide/Service Manual for directions. Verify the software version To find the software version: 1. Start Q-Stress. 2. From the Help menu, select About Q-Stress. Write down the Stress version. 3. Exit the application. If you are running on a version prior to 4.0, contact Mortara technical support before continuing. Remove existing software Before installing the new software, you must remove the old version: 1. Open the Control Panel and then open Add or Remove Programs 2. Highlight the Stress entry (or entries) and click the button to remove it. 3. You are prompted to remove the program from your computer. Click Yes. 4. At the prompt confirming the successful uninstall of Stress, click Finish. 5. Restart the computer if prompted. Install version 4.6 software Follow the Software Installation procedure beginning on page 3. 5

8 6 SOFTWARE UPGRADE

9 Configure Operating System Parameters After installing the Stress software, configure the operating system parameters to be specific for your location. Set screen display properties The Stress software requires the monitor to be set to a resolution of 1024x768 at 32bit color. To set the resolution in Windows 7: 1. From the Control Panel, select Appearance and Personalization, then select Display and select Change Display Settings. 2. Set the Screen resolution to 1024 by 768 pixels. 3. Click Apply, then OK after accepting the change in resolution. Enable ClearType For more accurate viewing of ECG traces and better clarity of text, use ClearType. 1. From the Control Panel, select Appearance and Personalization, then select Display. 2. Select Adjust ClearType text. 3. Select the Turn on ClearType check box. 7

10 CONFIGURE OPERATING SYSTEM PARAMETERS Set the operating system language and units Note: These languages are supported by Q-Stress: English (US) Chinese (PRC) French (France) Spanish (Mexico) To configure the system for use with a non-u. S. English language: 1. Go to Control Panel and select Clock, Language, and Region. 2. Select Regional and Language Options. 3. In the Formats tab, select the desired language in the Current format field: Chinese (PRC) English (United States) French (France) Spanish (Mexico) 4. Select the Location tab and in the Current location drop-down list, select the desired country. 8

11 CONFIGURE OPERATING SYSTEM PARAMETERS 5. Select the Keyboard and Languages tab and then the Change keyboards option. 6. Select the General tab and from the Default input language field, select the desired language from the drop-down list. 7. Click OK. 9

12 CONFIGURE OPERATING SYSTEM PARAMETERS 8. If your language s keyboard is absent, add it: a. Click Add. b. In the Add Input Language window, click the list expansion control next to the language. c. Click the list expansion control next to Keyboard. d. Select US as the keyboard type, like this: e. Click Apply and then OK to confirm the selection and close the window. 9. In the Choose a display language field, select the desired language. Note: Only available with Windows 7 Enterprise or Ultimate. Note: The languages in Bold have been added to these instructions for clarity. They will not be in the actual dialog box. 10

13 CONFIGURE OPERATING SYSTEM PARAMETERS 10. Choose the Administrative tab and then select the Change system locale option. 11. In the Current system locale drop down list, choose the desired language and click OK. 12. Click Restart now. 13. The system restarts with the newly configured system language. Set time/date/time zone Open the date and time control panel to set the time, date, and time zone for your location. Set the default printer Note: If your system has a laser printer, see the installation instructions supplied with the printer to install the printer driver. The Stress Installation wizard installed the driver for the optional TCR-1000 chart recorder. To allow the Stress application to print to the laser printer or chart recorder dedicated to it: 1. Open the printers control panel. 2. Right click on the printer name. 3. Select Set as Default Printer from the contextual menu. 4. Close the control panel. 11

14 CONFIGURE OPERATING SYSTEM PARAMETERS Configure the account You must configure the system s settings to be able to reports from the Stress application. See your network or administrator to configure an account for the system. Important: Configure the program to allow out-going mail only. Rename the computer If you are connecting more than one Stress system to the network, you must rename the Stress computer from the factory default so that the name is unique. Or, you may need to rename the computer to fit naming conventions for your site. To rename the computer: 1. Open the System control panel, and go to System and Security->System. Click Change Settings. 2. Click Change. 3. Type the new computer name in the Computer Name field. 4. Accept changes in the open dialog boxes and to restart the computer. Add the computer to a network domain Your system can join a network domain. See your network administrator for domain information and instructions. The user account with which you log on to the system must be a member of the Local Administrators group on the Stress system. If the Stress system includes the Network option, continue to Network option configuration. Otherwise, skip to Network option configuration If you have the Stress Network option, you can connect the system to the network using the following instructions. Note: Contact your network administrator to ensure that your network settings are consistent with your facility s current network parameters. Caution. Degraded system performance. Networks that are unstable and do not provide consistent availability may adversely affect the performance of the system. If your network cannot maintain a consistent connection with the computer, it is recommended that you disconnect your system from the network. 1. Shut down the computer. 2. Using a network patch cable, connect the network port on the back of the computer to the network port in the wall or on the hub. (See your network administrator for information about where to plug in your network cables). 3. Power on the computer. 4. Your Stress system is now on the network. The network name is qstress (if you did not rename it) and it is in the workgroup STRESS CONNECT. If you have more than one Stress system on your network, you will need to rename the computer. 12

15 CONFIGURE OPERATING SYSTEM PARAMETERS Configure Adobe Reader Adobe Reader is installed by the Stress installation wizard for displaying and printing final reports. Reader needs to be configured for use by the Stress application. 1. Launch Acrobat Reader from the short-cut on the desktop. 2. If prompted, accept the Reader license agreement. 3. If prompted, select the default language for Reader. 4. From the Edit menu, select Preferences. 5. Select Updater from the Categories list. 6. Select Do not download or install updates automatically. 7. If a User Account Control dialog box appears, accept the message. 8. From the File menu, select Print. (If Print is not available, complete the next 2 steps the first time you open a file in Reader.) 9. In the Print dialog box: Set Page Scaling to None. Check Auto-Rotate and Center. Check Choose Paper Source by PDF page size. 10. Click OK to close the Print dialog box. 11. Exit Adobe Reader. Continue to Stress Application Configuration on page 14. Enable spread spectrum in BIOS Note: This section applies only to 3.4GHz computers shipped with earlier versions of the software that are being upgraded to Q-Stress 4.6. To comply with electromagnetic specifications, the computer s motherboard clock timing must be set to Spread Spectrum through the BIOS. To enable spread spectrum: 1. Reboot the computer. 2. Immediately press Delete. 3. Select BIOS. 4. Select the Advance tab. 5. Scroll to Processor & Clock Option and select it. 6. Scroll to Spread Spectrum and enable it. 13

16 14 CONFIGURE OPERATING SYSTEM PARAMETERS

17 Stress Application Configuration Start the Stress software by double clicking the Stress icon on the desktop. On the initial running of the application, the desktop background changes and icon name changes to the name of the software. Important: If you are upgrading to 4.6 you must perform these steps to reset your default final report and procedure: 1. Select Final Report... from the Setup menu. 2. In the Final Report window, select your default report as the Current Report. 3. Select the checkbox Set as Default. 4. Close the Final Report window. 5. Select Procedure... from the Setup menu. 6. In the Procedure Setup window, select your default procedure as the Current Procedure. 7. Select the checkbox Set as Default. 8. Close the Procedure Setup window. If the Stress system includes a blood pressure monitor, configure the application to use the device. See the System Setup chapter in the Stress User Guide and Service Manual for specific instructions to configure the COM port for the device. If you purchased a Stress application option and received a HASP option installation kit, install it after running the Stress software. Refer to the instructions included with the kit for specific directions. After finishing the device and option configuration, restart the application. The system is now ready for use. 15

18 Troubleshooting a Failed Installation If during the installation you see a dialog box noting that the installation failed, it may be caused by an existing SQL client installation. First, confirm that an existing SQL client is the cause of the failure: 1. Open the Event Viewer administrative tool. 2. View the Application log. 3. In the log, you should see this entry: An installation package for the product Microsoft SQL Native Client cannot be found. Try the installation again using a valid copy of the installation package 'Sqlncli.msi'. If the entry is present: 1. Open the Add or Remove Programs control panel. 2. Uninstall the SQL Native Client. 3. Run the Stress installation again. If the SQL client is not installed, or running the installation again is unsuccessful, contact Technical Support. 16

19 Restoring the HP rp5800 PC The following procedure can be followed to restore the HP rp5800 PC to its default factory state (with Windows 7 and the Q-Stress software installed). You will need the Q-Stress Restore CD part # CloneZilla is used to restore the Q-Stress system. Note: In general, you will be accepting all of the default values. Steps that require you to choose a different value are highlighted in the left margin. Note: This process will erase all information stored on the PC, including any patient data and system settings. Make sure to back-up your data before starting this procedure. 1. Restart the computer and make sure the Q-Stress Restore CD is in the drive. 2. When the system loads, select System Restore (Default settings, VGA 1024x768) or Clonezilla live (Default settings, VGA 1024x768). 3. [Choose Language] en_us.utf-8 English 4. [Configuring console-data] Don t touch keymap 17

20 RESTORING THE HP RP5800 PC 5. [Start Clonezilla] Start Clonezilla 6. Select device-image 7. Select local_dev. 8. When prompted to insert a USB device, press Enter to continue (You do not need to insert anything.) 18

21 RESTORING THE HP RP5800 PC 9. When prompted to mount a device, select sda5 19.5G vfat Q-RESTORE 10. Select / Top_directory_in_the_local_device 11. Press Enter to continue at the disk space usage report. 12. Select "Beginner". 13. Select "restoreparts" option: 19

22 RESTORING THE HP RP5800 PC 14. Choose the Q-Stress image listed. 15. Select the target partition sda Press Enter to continue 17. Respond Y when prompted Are you sure you want to continue? (y/n) 18. Respond Y when prompted Let me ask you again. Are you sure you want to continue? (y/n) 19. Clonezilla will begin to restore the computer. This will take approximately minutes. 20. When it completes, press Enter to continue 21. Select poweroff 22. When the computer shuts down, eject the CD. 23. Turn it back on and reconfigure your system as desired (referencing the section above). Note: If prompted by the OS, activate Windows using the activation code printed on the PC. 20

MF9300. Software setup guide

MF9300. Software setup guide MF900 Software setup guide 0000 79-0 S INTRODUCTION This manual explains how to install and configure the software that is required for the printer function of the machine. The procedure for viewing the

More information

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM CONTENTS ABOUT THE SOFTWARE BEFORE INSTALLATION INSTALLING THE SOFTWARE CONNECTING TO A COMPUTER CONFIGURING THE PRINTER DRIVER TROUBLESHOOTING Page

More information

OS Update. Application. User s Guide. (ClassPad OS Version 3.04)

OS Update. Application. User s Guide. (ClassPad OS Version 3.04) For ClassPad 330 E OS Update (ClassPad OS Version 3.04) Application User s Guide CASIO Education website URL http://edu.casio.com ClassPad website URL http://edu.casio.com/products/classpad/ ClassPad register

More information

MicroPress 8. MicroPress 8 Installation Guide

MicroPress 8. MicroPress 8 Installation Guide MicroPress 8 MicroPress 8 Installation Guide 2011 Electronics For Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 17 August 2011 MICROPRESS INSTALLATION

More information

A-Scan Manager. Quick Reference Guide. Rev 1.04

A-Scan Manager. Quick Reference Guide. Rev 1.04 A-Scan Manager Quick Reference Guide Rev 1.04 Table of Contents 1. Quick Start Guide 1.1. Installing the A-Scan Manager Software.....4 1.2. Launch the A-Scan Manager Applications..7 1.3. Simple Preferences

More information

Windows NT Server Printer Driver Upgrade Instructions

Windows NT Server Printer Driver Upgrade Instructions Windows NT Server Printer Driver Upgrade Instructions The steps detailed below describe the most reliable method to upgrade printer driver versions after v1.6.0227a on a Windows NT 4.0 Server that is shared

More information

Silex SD-320AN-03 Serial Server

Silex SD-320AN-03 Serial Server GE Healthcare Silex SD-320AN-03 Serial Server Firmware Upgrade Instructions 2106794-001 Revision B Silex SD-320AN-03 Serial Server English 2018 General Electric Company. All Rights Reserved. Publication

More information

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN

Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN Installing and Setting Up the Snap-on EPC Rev.1.6 (12 Apr 2012) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on

More information

SCAN POINT IMAGE MANAGEMENT TECHNOLOGY LOCAL CLIENT USER'S MANUAL

SCAN POINT IMAGE MANAGEMENT TECHNOLOGY LOCAL CLIENT USER'S MANUAL SCAN POINT IMAGE MANAGEMENT TECHNOLOGY LOCAL CLIENT USER'S MANUAL 0900 0990 05 60 SCAN POINT IMAGE MANAGEMENT TECHNOLOGY Local Client User's Manual Effective: May 18, 2017 CONTACT INFORMATION To obtain

More information

ZP 500 Thermal Printer

ZP 500 Thermal Printer Quick Installation Guide FedEx Ship Manager Software FedEx Ship Manager at fedex.com ZP 500 Thermal Printer Step 1: Confirm Printer Kit Contents Your printer kit contains: 1. Thermal Printer 4. USB Cable

More information

Oscilloscope System Recovery

Oscilloscope System Recovery Instructions Oscilloscope System Recovery The oscilloscope application (firmware) runs on a Microsoft Windows platform. While the instrument is designed to operate reliably for many years, the loading

More information

Installation Guide. Version 2600

Installation Guide. Version 2600 Installation Guide Version 2600 Before You Start Check here to see that your PC has what it needs to run FedEx Ship Manager Software: Minimum System and Hardware Requirements Intel Pentium 4, 2.4 GHz recommended

More information

AWG5000 and AWG7000 Series Windows XP Operating System Restore

AWG5000 and AWG7000 Series Windows XP Operating System Restore DVD AWG5000 and AWG7000 Series Windows XP Operating System Restore 071-2084-01 www.tektronix.com Copyright Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries

More information

KODAK Dental Imaging Software Installation Guide

KODAK Dental Imaging Software Installation Guide CS3000-12 KODAK Dental Imaging Software Installation Guide Notice Carestream Dental, Inc., 2010. No part of this publication may be reproduced, stored in a retrieval system, translated to another language,

More information

SWP-0036 AFHCAN Telehealth Cart Imaging and Software Configuration. Revision: 1. Effective Date: 1/4/2011

SWP-0036 AFHCAN Telehealth Cart Imaging and Software Configuration. Revision: 1. Effective Date: 1/4/2011 Software Procedure SWP-0036 AFHCAN Telehealth Cart Imaging and Software Configuration Revision: 1 Effective Date: 1/4/2011 Alaska Native Tribal Health Consortium Division of Health Information & Technology

More information

Top Producer for BlackBerry Quick Setup

Top Producer for BlackBerry Quick Setup Top Producer for BlackBerry Quick Setup Top Producer Systems Phone Number: 1-800-830-8300 Email: support@topproducer.com Website: www.topproducer.com Trademarks Information in this document is subject

More information

Setup Guide. Operating Instructions. 1 Before Setting Up 2 Installation 3 Start-up/Shutdown

Setup Guide. Operating Instructions. 1 Before Setting Up 2 Installation 3 Start-up/Shutdown Operating Instructions Setup Guide 1 Before Setting Up 2 Installation 3 Start-up/Shutdown Read this manual carefully before you use this product and keep it handy for future reference. Introduction Important

More information

x10data Application Platform v7.1 Installation Guide

x10data Application Platform v7.1 Installation Guide Copyright Copyright 2010 Automated Data Capture (ADC) Technologies, Incorporated. All rights reserved. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the

More information

Software Conversion Guide

Software Conversion Guide Eagle SSE Software Conversion Guide Release 17 (Server Level 29) EL2157 This manual contains reference information about software products from Activant Solutions Inc. The software described in this manual

More information

FileMaker. Mobile 2.1. User s Guide. For Windows, Mac, Palm OS, and Pocket PC. Companion for Palm OS and Pocket PC

FileMaker. Mobile 2.1. User s Guide. For Windows, Mac, Palm OS, and Pocket PC. Companion for Palm OS and Pocket PC For Windows, Mac, Palm OS, and Pocket PC FileMaker Mobile 2.1 Companion for Palm OS and Pocket PC User s Guide 2000-2002 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa

More information

Backpack Hard Drive Help and User's Guide rev

Backpack Hard Drive Help and User's Guide rev Backpack Hard Drive Help and User's Guide rev 09.00.01 Getting Started To get started with backpack, install the software driver from the diskette first. After restarting your computer you will be ready

More information

Windows XP Software Installation Instructions GCC Elite Series Printers

Windows XP Software Installation Instructions GCC Elite Series Printers TM Windows XP Software Installation Instructions GCC Elite Series Printers This document is intended to provide instructions for obtaining and installing the Windows XP driver software for GCC s Elite

More information

Peerless Drive System User's Manual

Peerless Drive System User's Manual Peerless Drive System User's Manual Copyright 2001 Iomega Corporation Iomega, the stylized "i" logo, Peerless, and the Peerless brand block are either registered trademarks or trademarks of Iomega Corporation

More information

User's Manual V 32.0

User's Manual V 32.0 User's Manual V 32.0 Trademark Acknowledgements Ford is a registered trademark of Ford Motor Company. Copyright Information DBS User s Manual. 2003, 2004 Ford Motor Company All rights reserved. The information,

More information

Laser Beam Printer. Network Guide. IMPORTANT: Read this manual carefully before using your printer. Save this manual for future reference.

Laser Beam Printer. Network Guide. IMPORTANT: Read this manual carefully before using your printer. Save this manual for future reference. Laser Beam Printer Network Guide IMPORTANT: Read this manual carefully before using your printer. Save this manual for future reference. ENG Network Guide How This Manual Is Organized Chapter 1 Before

More information

Quick Setup & Getting Started

Quick Setup & Getting Started Quick Setup & Getting Started HP Compaq Business PC Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and

More information

Installing and Setting Up the Snap-on EPC. Rev.1.10 (10 Oct 2013) PN EN

Installing and Setting Up the Snap-on EPC. Rev.1.10 (10 Oct 2013) PN EN Installing and Setting Up the Snap-on EPC Rev.1.10 (10 Oct 2013) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on

More information

FileMaker. Mobile 7. User s Guide. For Windows, Mac, Palm OS, and Pocket PC. Companion for Palm OS and Pocket PC

FileMaker. Mobile 7. User s Guide. For Windows, Mac, Palm OS, and Pocket PC. Companion for Palm OS and Pocket PC For Windows, Mac, Palm OS, and Pocket PC FileMaker Mobile 7 Companion for Palm OS and Pocket PC User s Guide 2000-2004 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa

More information

P3PC ENZ0. Troubleshooting. (installation)

P3PC ENZ0. Troubleshooting. (installation) P3PC-3702-01ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap S1500/S1500M/S1300i/S1300/ S1100 (hereinafter referred to as "the ScanSnap"). This

More information

Splash TM RPX-ii for DocuColor Getting Started

Splash TM RPX-ii for DocuColor Getting Started Splash TM RPX-ii for DocuColor 5000 Getting Started 2007 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45065397 17 August 2007 CONTENTS

More information

Unit III: Working with Windows and Applications. Chapters 5, 7, & 8

Unit III: Working with Windows and Applications. Chapters 5, 7, & 8 Unit III: Working with Windows and Applications Chapters 5, 7, & 8 Learning Objectives In this unit, you will: Launch programs and navigate the Windows task bar. Perform common windows functions. Customize

More information

INSTRUCTION MANUAL DIGITAL IMAGE PRINTER PICTROGRAPHY 3500 PRINTER DRIVER SOFTWARE

INSTRUCTION MANUAL DIGITAL IMAGE PRINTER PICTROGRAPHY 3500 PRINTER DRIVER SOFTWARE INSTRUCTION MANUAL DIGITAL IMAGE PRINTER PICTROGRAPHY 3500 PRINTER DRIVER SOFTWARE Third Edition PP3-B482E3 LICENSING AGREEMENT 1. Copyright The copyright for this software is owned by Fuji Photo Film

More information

Operating Instructions

Operating Instructions Table of Contents Installation Overview General Installation Overview... Setting Up Your Machine Network Configuration... 4 Setting up the Network Configuration... 4 Installation Installing the Printer

More information

Pulse 4.11 SCADA/HMI. Installation Guide

Pulse 4.11 SCADA/HMI. Installation Guide Pulse 4.11 SCADA/HMI Installation Guide June 2017 Copyright The information in this document is subject to change without prior notice and does not represent a commitment on the part of AFCON Control and

More information

Load Bulletin ADP, Inc. Dealer Services 5607 New King Street Troy, MI Executive Assistant. Loading the 8.0 Client Media

Load Bulletin ADP, Inc. Dealer Services 5607 New King Street Troy, MI Executive Assistant. Loading the 8.0 Client Media Load Bulletin ADP, Inc. Dealer Services 5607 New King Street Troy, MI 48098 Make sure the product code(s) on the media label include this number: 8.0 Executive Assistant Loading the 8.0 Client Media This

More information

- Contents - - Hard-disk space 280MB of available hard-disk space

- Contents - - Hard-disk space 280MB of available hard-disk space ------ ScanSnap Manager V4.0L20 README File PFU LIMITED ------ - Contents - 1. System requirements 2. Cautions Regarding USB and Your Computer 3. Cautions for Windows Vista Users 4. Cautions Concerning

More information

1 Introduction: Cloning the Master Image

1 Introduction: Cloning the Master Image Clonezilla Basics for Windows Embedded By Sean D. Liming and John R. Malin Annabooks www.annabooks.com August 22, 2014 Update September 29, 2015 Table Of Contents 1 INTRODUCTION: CLONING THE MASTER IMAGE...

More information

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM

SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM SOFTWARE SETUP GUIDE DIGITAL MULTIFUNCTIONAL SYSTEM BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING AND USEFUL INFORMATION Page 2 8 29 36

More information

USB Wireless Network Adapter User s Manual

USB Wireless Network Adapter User s Manual USB Wireless Network Adapter User s Manual Rev 0.9 Regulatory compliance FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

More information

Before Installing the Software

Before Installing the Software Before Installing the Software Before using the printer, the printer software drivers must be installed. The software is on the CD-ROM included with your printer. Installation instructions are included

More information

User Addendum User Box Scan support on the Fiery E C-KM Color Server, version 1.1

User Addendum User Box Scan support on the Fiery E C-KM Color Server, version 1.1 User Addendum User Box Scan support on the Fiery E 10 50-45C-KM Color Server, version 1.1 This document describes installing software for User Box scan support on the Fiery E 10 50-45C-KM Color Server,

More information

Mac OS X 10.6 Snow Leopard Installation and Setup Guide

Mac OS X 10.6 Snow Leopard Installation and Setup Guide Mac OS X 10.6 Snow Leopard Installation and Setup Guide Read this document before you install Mac OS X. It includes important information about installing Mac OS X. For more information about Mac OS X,

More information

PanelMate epro PS Family Restore Factory Image Load

PanelMate epro PS Family Restore Factory Image Load PanelMate epro PS Family Restore Factory Image Load Introduction The restore factory image load kits provides a simple way for users to reset the load of the internal CompactFlash, that holds the Operating

More information

Fiery EX4112/4127. Welcome

Fiery EX4112/4127. Welcome Fiery EX4112/4127 Welcome 2007 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45063989 17 August 2007 WELCOME 5 WELCOME This Welcome

More information

EXTERNAL HARD DRIVE. connect. USB2.0FireWirePCMac

EXTERNAL HARD DRIVE. connect. USB2.0FireWirePCMac EXTERNAL HARD DRIVE connect welcome contents Your new Seagate external hard drive is a state-of-the-art unit: solid, safe, quiet, cool, versatile and portable, ready to go from one location to another

More information

Edit contains commands for adding, deleting, and changing configurations. The functions listed are dependent on what is highlighted in the tree.

Edit contains commands for adding, deleting, and changing configurations. The functions listed are dependent on what is highlighted in the tree. 7 Menu Items 7.1 Edit Edit contains commands for adding, deleting, and changing configurations. The functions listed are dependent on what is highlighted in the tree. 7.1.1 Add Terminal Edit > Add Terminal

More information

Nortel Media Application Server 5.1. Installation NN

Nortel Media Application Server 5.1. Installation NN NN44450-300 Document status: Standard Document issue: 01.03 Document date: 15 October 2008 Product release: Release 5.1 Job function: and Commissioning Type: Technical document Language type: English All

More information

Getting Started. HP Business PCs

Getting Started. HP Business PCs Getting Started HP Business PCs Copyright 2010, 2012-2014, 2016 HP Development Company, L.P. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

More information

Port Connections This section covers parallel and Ethernet connections.

Port Connections This section covers parallel and Ethernet connections. CHAPTER 3 PC Setup This chapter covers connecting the printer and installing utilities, drivers, and related files on PC hosts. Port Connections This section covers parallel and Ethernet connections. Parallel

More information

Top Producer for Palm handhelds

Top Producer for Palm handhelds Top Producer for Palm handhelds User Guide Top Producer Systems Phone number: 1-800-830-8300 E-mail: support@topproducer.com Web site: www.topproducer.com Fax number: 604.270.6365 Top Producer for Palm

More information

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version

FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version FAS Asset Accounting FAS CIP Accounting FAS Asset Inventory Installation & Administration Guide Version 2011.1 2011 Sage Software, Inc. All rights reserved. Portions Copyrighted 1991-2001 by ianywhere

More information

Network USB over IP Server With 1-USB2.0 Port. User Manual V1.0

Network USB over IP Server With 1-USB2.0 Port. User Manual V1.0 Network USB over IP Server With 1-USB2.0 Port User Manual V1.0 1 2 TABLE OF CONTENTS COPYRIGHT...4 1. INTRODUCTION...5 PRODUCT OVERVIEW...5 COMPONENTS AND FEATURES...5 HARDWARE INSTALLATION...5 2. THE

More information

How to install the software of ZNS8022

How to install the software of ZNS8022 How to install the software of ZNS8022 1. Please connect ZNS8022 to your PC after finished assembly. 2. Insert Installation CD to your CD-ROM drive and initiate the auto-run program. The wizard will run

More information

Field PC 2 Windows OS Update Guide

Field PC 2 Windows OS Update Guide Field PC 2 Windows OS Update Guide All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the

More information

Operating Instructions

Operating Instructions Operating Instructions (For User Setup) Digital Colour Imaging Systems Model No. DP-C406 / C306 / C266 Table of Contents Installation Overview General Installation Overview...2 Installation Installing

More information

Firmware, Database, & PC Application Update Installation Instructions

Firmware, Database, & PC Application Update Installation Instructions Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described

More information

The leg stand is located at the back of the product, on the top right. This adjustable-length leg stand will allow your ARCHOS to stand by itself on a

The leg stand is located at the back of the product, on the top right. This adjustable-length leg stand will allow your ARCHOS to stand by itself on a About ARCHOS 9 PCtablet How do I activate the webcam? General It is activated by default and it automatically turns on when using an application that uses the webcam such as Skype. How can I install my

More information

Getting Started. Overview of the Splash G3535

Getting Started. Overview of the Splash G3535 Getting Started This Getting Started explains how to unpack, install, and connect the Splash G3535 Color Server. After completing the tasks outlined in this guide, you can explore the features of the Splash

More information

UNGASS DATA ENTRY SOFTWARE: GLOBAL REPORTING 2008 SETUP NOTES

UNGASS DATA ENTRY SOFTWARE: GLOBAL REPORTING 2008 SETUP NOTES version 1.0 UNGASS DATA ENTRY SOFTWARE: GLOBAL REPORTING 2008 SETUP NOTES Prepared by UNAIDS Evidence, Monitoring, and Policy Department UNAIDS 20, Avenue Appia 1211 Geneva 27 Switzerland Tel. (+41) 22

More information

GB-Ware. Quick Guide. Powered by: Tel: Fax Web:

GB-Ware. Quick Guide. Powered by: Tel: Fax Web: Powered by: GB-OS 6.1 GB-Ware Quick Guide GBWAQG201208-01 Global Technology Associates 3505 Lake Lynda Drive Suite 109 Orlando, FL 32817 Tel: +1.407.380.0220 Fax. +1.407.380.6080 Email: info@gta.com Web:

More information

Silk Performance Manager Installation and Setup Help

Silk Performance Manager Installation and Setup Help Silk Performance Manager 18.5 Installation and Setup Help Micro Focus The Lawn 22-30 Old Bath Road Newbury, Berkshire RG14 1QN UK http://www.microfocus.com Copyright 2004-2017 Micro Focus. All rights reserved.

More information

Agilent E2094M IO Libraries

Agilent E2094M IO Libraries Agilent E2094M IO Libraries Agilent IO Libraries Installation and Configuration Guide Agilent Technologies Notices Agilent Technologies, Inc. 2003 No part of this manual may be reproduced in any form or

More information

Windows Me Plug-and-Play

Windows Me Plug-and-Play LAB PROCEDURE 18 Windows Me Plug-and-Play OBJECTIVES 1. Remove Network Adapter from the system. 2. Install Network Adapter with Plug-and-Play (PnP). 3. Remove modem. 4. Install modem with Plug-and-Play

More information

FileMaker. Mobile 2. User s Guide. For Windows, Mac, and Palm OS. Companion for Palm OS

FileMaker. Mobile 2. User s Guide. For Windows, Mac, and Palm OS. Companion for Palm OS For Windows, Mac, and Palm OS FileMaker Mobile 2 Companion for Palm OS User s Guide 2000-2002 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa Clara, California 95054

More information

AR-PK6. SOFTWARE SETUP GUIDE (for printer)

AR-PK6. SOFTWARE SETUP GUIDE (for printer) SOFTWARE SETUP GUIDE (for printer) MODEL AR-PK6 PS EXPANSION KIT INTRODUCTION REQUIREMENTS FOR WINDOWS REQUIREMENTS FOR MACINTOSH SECTIONS OF THE OPERATION MANUALS THAT ARE RELATED TO THE PS EXPANSION

More information

Data Protector Express Hewlett-Packard Company

Data Protector Express Hewlett-Packard Company Installation Guide Data Protector Express Hewlett-Packard Company ii Data Protector Express Installation Guide Copyright Copyright 2005/2006 by Hewlett-Packard Limited. March 2006 Part Number BB116-90024

More information

ViconNet Version 6 XX Installation and Upgrade Guide.

ViconNet Version 6 XX Installation and Upgrade Guide. Installation and Upgrade Guide XX222-01-02 ViconNet Version 6 Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788 Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116 24-Hour Technical

More information

User s Manual. Touch Panel Setting Tool. Important

User s Manual. Touch Panel Setting Tool. Important User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document

More information

PanelMate epro PS and epro PS Classic Restore Factory Image Load

PanelMate epro PS and epro PS Classic Restore Factory Image Load PanelMate epro PS and epro PS Classic Restore Factory Image Load Introduction There are 4 versions of the restore factory image load kits (catalog numbers 76MLPSD, 76MLPSB, 76MLPSCD, and 76MLPSCB). These

More information

Splash RPX-i Color Server. Getting Started

Splash RPX-i Color Server. Getting Started Splash RPX-i Color Server Getting Started 2006 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45054825 05 May 2006 CONTENTS 3 CONTENTS

More information

User s Manual. Touch Panel Setting Tool. Important

User s Manual. Touch Panel Setting Tool. Important User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document

More information

Image Backup and Recovery Procedures For Windows 7

Image Backup and Recovery Procedures For Windows 7 Image Backup and Recovery Procedures For Windows 7 Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important

More information

Wireless Setup Manual

Wireless Setup Manual Wireless Setup Manual Before you begin the wireless setup process, please choose the installation method. 1) To setup your printer using drivers from the web continue to page 2 2) To setup your printer

More information

InventoryControl Quick Start Guide

InventoryControl Quick Start Guide InventoryControl Quick Start Guide Copyright 2013 Wasp Barcode Technologies 1400 10 th St. Plano, TX 75074 All Rights Reserved STATEMENTS IN THIS DOCUMENT REGARDING THIRD PARTY PRODUCTS OR SERVICES ARE

More information

AIRNET 54Mb b/g High Power USB Adapter. User s Manual

AIRNET 54Mb b/g High Power USB Adapter. User s Manual AIRNET 54Mb 802.11b/g High Power USB Adapter User s Manual FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits

More information

Software Package Installation Instructions

Software Package Installation Instructions Introduction Novar provides an automatic installation package that involves reading simple, easy-to-follow instructions on each screen and clicking on the appropriate options. This document provides detailed

More information

BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING

BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING Software Setup Guide BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING Thank you for purchasing this product. This manual explains how to install

More information

Applied ICT Skills MS Windows

Applied ICT Skills MS Windows Applied ICT Skills MS Windows Lesson 1 - How to install an operating system into computer? Windows 7 is perhaps the best Microsoft operating system and is very easy to install compared to other windows.

More information

USB driver and Software Installation. UPS Monitoring and Management Software

USB driver and Software Installation. UPS Monitoring and Management Software USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver

More information

Installation Guide. Cornerstone* 8.5 NEXT Software and IDEXX-PACS* Imaging Software. Plan for your upgrade

Installation Guide. Cornerstone* 8.5 NEXT Software and IDEXX-PACS* Imaging Software. Plan for your upgrade Installation Guide This installation guide is for customers who are using Cornerstone* Software version 8.2 to 8.3 NEXT with the integrated diagnostic imaging module. If your software does not meet these

More information

2009 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product.

2009 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. GA-1310 Welcome 2009 Electronics for Imaging, Inc. The information in this publication is covered under Legal Notices for this product. 45085373 5 May 2009 WELCOME 3 WELCOME This Welcome document provides

More information

SQLBase. Starter Guide

SQLBase. Starter Guide SQLBase Starter Guide 20-2905-1004 Trademarks Centura, Centura net.db, Centura Ranger, the Centura logo, Centura Web Developer, Gupta, the Gupta logo, Gupta Powered, the Gupta Powered logo, Fast Facts,

More information

Setup Guide. Before Setting Up. Installation. Start-up/Shutdown

Setup Guide. Before Setting Up. Installation. Start-up/Shutdown Setup Guide Before Setting Up Installation Start-up/Shutdown For information not in this manual, refer to the HTML/PDF files on the supplied CD-ROM. Read this manual carefully before you use this product

More information

Lionstracs Groove X-R

Lionstracs Groove X-R Lionstracs Groove X-R Groove OS version 5.3 Installation & Upgrade Guide 31 October 2011 English Language documentation prepared by Corcyra Global in consultation with Lionstracs Table of Contents Warning

More information

Release Notes. Accops HyWorks SSO Client Release. HyWorks SSO Client v

Release Notes. Accops HyWorks SSO Client Release. HyWorks SSO Client v Release Notes Accops HyWorks SSO Client Release HyWorks SSO Client v3.1.1.160 Last Updated: 31 May 2018 Copyright 2018, Accops Systems Private Limited. All Rights Reserved. The information contained in

More information

Intellex Digital Video Management System. Installing a CD-RW in Intellex

Intellex Digital Video Management System. Installing a CD-RW in Intellex Intellex Digital Video Management System Installing a CD-RW in Intellex 2 Intellex Digital Video Management System Notice Copyright The information in this manual was current when published. The manufacturer

More information

P3PC ENZ0. Troubleshooting. (installation)

P3PC ENZ0. Troubleshooting. (installation) P3PC-4222-04ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap ix500 (hereinafter referred to as "the ScanSnap"). This manual provides information

More information

Firmware, Database, & PC Application Update Installation Instructions

Firmware, Database, & PC Application Update Installation Instructions Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described

More information

Professional. Central Management Software. Cam Viewer Pro. Quick Installation Guide

Professional. Central Management Software. Cam Viewer Pro. Quick Installation Guide Professional Central Management Software Cam Viewer Pro Quick Installation Guide Table of Contents Chapter 1. Introduction... 3 1.1 Before Installation... 3 1.2 System Requirements... 4 1.3 Comparison

More information

ver Sound Editor for MAGICSTOMP ver is for units using version 2.10 firmware or greater.

ver Sound Editor for MAGICSTOMP ver is for units using version 2.10 firmware or greater. ver. 2.10 Sound Editor for ver. 2.10 is for units using version 2.10 firmware or greater. SPECIAL NOTICES The software and this are exclusive copyrights of Yamaha Corporation. Copying of the software or

More information

Getting Started. HP Business PCs

Getting Started. HP Business PCs Getting Started HP Business PCs Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Windows is a U.S. registered trademark of

More information

Software User's Guide

Software User's Guide Software User's Guide The contents of this guide and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications

More information

Document # Rev. C 4/10 Cencon 4 Getting Started Guide

Document # Rev. C 4/10 Cencon 4 Getting Started Guide Page 1 KABA MAS Cencon 4 Getting Started Guide Kaba Mas Welcome Kaba Mas, part of the world-wide Kaba group, is the world's leading manufacturer and supplier of high security, electronic safe locks. Its

More information

KYOCERA Net Admin Installation Guide

KYOCERA Net Admin Installation Guide KYOCERA Net Admin Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for

More information

Top Producer for Palm Handhelds

Top Producer for Palm Handhelds Top Producer for Palm Handhelds Quick Setup Top Producer Systems Phone number: 1-800-830-8300 Email: support@topproducer.com www.topproducer.com Fax: 604.270.6365 Top Producer for Palm handhelds Quick

More information

SMC Barricade Routers

SMC Barricade Routers SMC Barricade Routers User Guide SMC7004BR V1.0 Congratulations on your purchase of the SMC Barricade. The SMC Barricade is a Broadband Router designed to share Internet Access, provide security, and to

More information

suitedxt Instructions for Use NeoSoft, LLC NS Rev. 2 Copyright 2014 NeoSoft, LLC All rights reserved

suitedxt Instructions for Use NeoSoft, LLC NS Rev. 2 Copyright 2014 NeoSoft, LLC All rights reserved suitedxt Instructions for Use NeoSoft, LLC NS 03 009 0001 Rev. 2 Copyright 2014 NeoSoft, LLC All rights reserved Revision History Document Revision Date of Issue Description 1 14 July 2014 Initial Release

More information

System Software Update Instructions

System Software Update Instructions System Software Update Instructions This document provides instructions for installing updated system software on the VERUS Diagnostic Platform. Installing an update is a two-part process: First install

More information

Professional Edition on a Server for Network Access & On Thin-Client Workstations Using Client Deployment 5

Professional Edition on a Server for Network Access & On Thin-Client Workstations Using Client Deployment 5 Addendum to the Microsoft Business Solutions for Analytics FRx 6.7 Installation and Configuration Guide FRx 6.7 Solomon Installation Copyright and Trademarks Copyright 2002 Great Plains Software, Inc.

More information

Legal Notes. Regarding Trademarks. Models supported by the GX printer driver KYOCERA Document Solutions Inc.

Legal Notes. Regarding Trademarks. Models supported by the GX printer driver KYOCERA Document Solutions Inc. Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from

More information