EMC SourceOne for Microsoft SharePoint Version 7.1

Transcription

1 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide REV 01 EMC Corporation Corporate Headquarters: Hopkinton, MA

2 Copyright EMC Corporation. All rights reserved. Published in the USA. Published September 2013 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. EMC 2, EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other countries. All other trademarks used herein are the property of their respective owners. For the most up-to-date regulatory document for your product line, go to EMC Online Support ( 2 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

3 Contents Chapter 1 Chapter 2 Introduction Overview Archiving...10 Search (Archive Search and EMC SourceOne Search)...11 Archive Search Restore...11 External BLOB Storage (EBS)...11 Remote BLOB Storage (RBS)...12 Applications (on-premises environments)...13 Applications (cloud-based environments)...14 EMC SourceOne for Microsoft SharePoint architecture Prerequisite installation: EMC SourceOne platform Accounts and permissions Accounts and permissions (on-premises environments)...17 Accounts and permissions (cloud-based environments)...23 System requirements System requirements (on-premises environments)...24 System requirements (cloud-based environments)...25 Important considerations Considerations (on-premises environments)...26 Considerations (cloud-based environments)...27 Installing Microsoft SharePoint Support Installation overview Best practices for deployment...33 Installing SharePoint support on EMC SourceOne servers Prerequisites...34 Procedure...35 Post-installation...39 SharePoint cloud-based configuration EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide 3

4 Contents SharePoint on-premises solution deployment Solution deployment process Solution types Localization Upgrading a solution Where to run installs Permissions Configure environment variables (optional) Deploy the Archive feature Deploy the Archive Search feature Deploy the Archive Search Restore feature Deploy the EBS feature Troubleshooting Maintaining the installation Remove a component Repair the EMC SourceOne for Microsoft SharePoint BCE installation Modifying the EMC SourceOne for Microsoft SharePoint BCE installation Upgrading.wsp solutions Chapter 3 Uninstalling Microsoft SharePoint Support Uninstallation overview Prerequisites Uninstalling SharePoint by using a command script Uninstalling SharePoint by using the user interface EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

5 Preface As part of an effort to improve its product lines, EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use. The product release notes provide the most up-to-date information on product features. Contact your EMC technical support professional if a product does not function properly or does not function as described in this document. This document was accurate at publication time. Go to EMC Online Support ( to ensure that you are using the latest version of this document. Audience Related documentation This document is part of the EMC SourceOne documentation set, and is intended for use by installers of the product, EMC SourceOne system administrators, and Microsoft SharePoint administrators. Related documents include: EMC SourceOne Management Installation Guide EMC SourceOne Management Release Notes EMC SourceOne for Microsoft SharePoint Administration Guide EMC SourceOne for Microsoft SharePoint Release Notes EMC SourceOne Search User Guide EMC SourceOne Products Compatibility Guide EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide 5

6 Preface Conventions used in this document EMC uses the following conventions for special notices. Note: A note presents information that is important, but not hazard-related.! CAUTION A caution contains information essential to avoid data loss or damage to the system or equipment.! IMPORTANT An important notice contains information essential to operation of the software. WARNING A warning contains information essential to avoid a hazard that can cause severe personal injury, death, or substantial property damage if you ignore the warning. DANGER A danger notice contains information essential to avoid a hazard that will cause severe personal injury, death, or substantial property damage if you ignore the message. Typographical conventions EMC uses the following type style conventions in this document: Normal Used in running (nonprocedural) text for: Names of interface elements (such as names of windows, dialog boxes, buttons, fields, and menus) Names of resources, attributes, pools, Boolean expressions, buttons, DQL statements, keywords, clauses, environment variables, filenames, functions, utilities URLs, pathnames, filenames, directory names, computer names, links, groups, service keys, file systems, notifications Bold: Used in running (nonprocedural) text for: Names of commands, daemons, options, programs, processes, services, applications, utilities, kernels, notifications, system call, man pages 6 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

7 Preface Italic: Courier: Courier bold: Used in procedures for: Names of interface elements (such as names of windows, dialog boxes, buttons, fields, and menus) What user specifically selects, clicks, presses, or types Used in all text (including procedures) for: Full titles of publications referenced in text Emphasis (for example a new term) Variables Used for: System output, such as an error message or script URLs, complete paths, filenames, prompts, and syntax when shown outside of running text Used for: Specific user input (such as commands) Courier italic: Used in procedures for: Variables on command line User input variables < > Angle brackets enclose parameter or variable values supplied by the user [ ] Square brackets enclose optional values Vertical bar indicates alternate selections - the bar means or { } Braces indicate content that you must specify (that is, x or y or z)... Ellipses indicate nonessential information omitted from the example Where to get help EMC support, product, and licensing information can be obtained as follows: Product information For documentation, release notes, software updates, or information about EMC products, go to EMC Online Support at: Technical support Go to EMC Online Support and click Service Center. You will see several options for contacting EMC Technical Support. Note that to open a service request, you must have a valid support agreement. Contact your EMC sales representative for details about obtaining a valid support agreement or with questions about your account. Online communities Visit EMC Community Network at for peer contacts, conversations, and EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide 7

8 Preface content on product support and solutions. Interactively engage online with customers, partners, and certified professionals for all EMC products. Guide to using this document This document supports online reading using Adobe Reader version 7.0 or above. For optimal performance, you should download and install the latest free Adobe Reader version: ( Simplifying navigation This document uses hyperlinks to other relevant sections. You can simplify navigation by enabling an optional Web browser-like navigation feature in Adobe Acrobat Reader (version 7.0 or above): 1. On the Acrobat toolbar, right-click the Page Up or Page Down icon. Page Up Page Down 2. Click Show All Tools. The Previous View and Next View navigation buttons are displayed on your toolbar. Previous View Next View The Previous View and Next View navigation buttons function similar to your Web browser navigation buttons, enabling you to navigate between views using document hyperlinks. More information For more information about Adobe Reader navigation and other features, refer to the product help system. Your comments Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the user publications. Send your opinions of this document to: 8 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

9 1 Introduction EMC SourceOne for Microsoft SharePoint extends the EMC SourceOne platform, enabling organizations to manages the growth of SharePoint content and sites through storage optimization and enhances the control of inactive content through SharePoint archiving. This chapter is organized as follows: Overview EMC SourceOne for Microsoft SharePoint architecture Prerequisite installation: EMC SourceOne platform Accounts and permissions System requirements Important considerations Introduction 9

10 Introduction Overview EMC SourceOne for Microsoft SharePoint addresses long-term or specialized content archiving strategies while leveraging the EMC SourceOne architecture to provide access to archived content using search user interfaces. This section describes: Archiving on page 10 Search (Archive Search and EMC SourceOne Search) on page 11 Archive Search Restore on page 11 External BLOB Storage (EBS) on page 11 Remote BLOB Storage (RBS) on page 12 Applications (on-premises environments) on page 13 Applications (cloud-based environments) on page 14 Archiving EMC SourceOne for Microsoft SharePoint supports the policy-based archiving of SharePoint content in the EMC SourceOne archive to provide efficient storage of SharePoint content. EMC SourceOne for Microsoft SharePoint can archive content from the following types of Microsoft SharePoint environments: On-premises SharePoint environment - Administrators can configure a SharePoint Archive activity to archive SharePoint content from on-premises SharePoint servers to the EMC SourceOne Native Archive. Cloud-based SharePoint environment - Administrators can configure a SharePoint Online Archive activity to archive SharePoint content stored in the cloud (SharePoint Online). 10 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

11 Introduction Search (Archive Search and EMC SourceOne Search) EMC SourceOne for Microsoft SharePoint provides the following options for searching for archived SharePoint content: End users can search for archived content using an Archive Search site integrated into SharePoint. This feature is only available for use in on-premises SharePoint environments. Administrative users can use the EMC SourceOne Search application to search for archived SharePoint content. This feature can be used with on-premises or cloud-based SharePoint environments. Archive Search Restore SharePoint administrators can enable end-users and power users to restore items found using SharePoint Archive Search: End-users can restore selected items to their original sites (if available). If the original site no longer exists, the user can specify another location. Power users can perform the same restore actions as end-users. In addition, power users can: Perform batch restores to the original site. If the original site no longer exists, a power user can restore to a default target site. View the farm hierarchy and select several lists to restore. External BLOB Storage (EBS) In on-premises environments, EMC SourceOne for Microsoft SharePoint also provides External binary large object (BLOB) storage, effectively offloading the storage of binary large objects from the SharePoint SQL Server and storing them using EMC SourceOne. EBS is configured at the farm level. This feature includes an EBS Provider database which is installed on the SharePoint SQL Server to maintain identification information for BLOBs stored externally in the Native Archive by EMC SourceOne for Microsoft SharePoint. Overview 11

12 Introduction Remote BLOB Storage (RBS) EMC SourceOne for Microsoft SharePoint Storage Management is a separate product for on-premises environments which provides support for Remote BLOB Storage (RBS).! IMPORTANT Details on installing, configuring and administering the EMC SourceOne for Microsoft SharePoint Storage Management product are provided in a separate documentation set which accompanies the product. RBS is used specifically with Microsoft SharePoint Foundation 2010/2013, and Microsoft SharePoint Server 2010/2013. RBS provides the ability to externalize the storage of BLOBs outside of the SharePoint SQL Server and on remote storage. BLOBs are stored directly on the selected storage. BLOB storage is configured at the content database level. Deploying the EMC SourceOne for Microsoft SharePoint Storage Management software installs the EMC SourceOne RBS Provider in the farm and adds the full set of user interfaces to your Microsoft SharePoint Foundation 2010/2013 or Microsoft SharePoint Server 2010/2013 Central Administration site. Feature details include: Content Database Settings Provides configuration settings for storing BLOB content normally stored in the SharePoint 2010/2013 database in remote storage. Migration Service Migrates BLOBs from External BLOB Storage (EBS), the SharePoint SQL database, or another RBS store to the EMC SourceOne RBS store. Maintenance Service Performs periodic garbage collection and other maintenance. Health Monitor Monitors RBS storage for available free space and provides alerts based on configured thresholds. Enhanced EMC SourceOne Primary Administration site An updated EMC SourceOne primary administration site is provided which includes links to RBS-specific configuration information. 12 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

13 Introduction For more details about these interfaces and their use, refer to the EMC SourceOne for Microsoft SharePoint Storage Management documentation set. Applications (on-premises environments) This section describes applications specifically used with EMC SourceOne for Microsoft SharePoint in on-premises environments. SharePoint administration sites Installing EMC SourceOne for Microsoft SharePoint solutions in your SharePoint environment provides administration sites for your on-premises SharePoint environment. These sites enable SharePoint administrators perform SharePoint-side configuration of general administration of EMC SourceOne features provided for SharePoint. EMC SourceOne Search (for Microsoft SharePoint content) EMC SourceOne Search enables Microsoft SharePoint administrators to search for and process SharePoint content stored in the EMC SourceOne Native Archive. Administrators can search archived content belonging to many end users. End users must use the EMC SourceOne Search functionality integrated in the SharePoint user interface to search for content for which they have the appropriate permissions to access. See Integrated SharePoint Archive Search on page 13 for details. Note: Since EBS and RBS content is not stored in the Native Archive, it is not searchable using EMC SourceOne Search. For more information about EMC SourceOne Search application features and capabilities, refer to the EMC SourceOne Search User Guide. Integrated SharePoint Archive Search Installing EMC SourceOne components on an on-premises SharePoint server or farm provides an EMC SourceOne page in SharePoint which enables SharePoint users to search for content archived by EMC SourceOne for Microsoft SharePoint. If the Archive Search Restore feature is installed, additional options related to this feature are provided. Overview 13

14 Introduction Permissions are controlled by either Active Directory or SharePoint group association the user had at the time the content was archived. Refer to the EMC SourceOne for Microsoft SharePoint Administration Guide for more details. Applications (cloud-based environments) SharePoint Online environments are cloud-based and no additional EMC SourceOne applications that are installed on SharePoint servers. Content archived in EMC SourceOne from cloud-based SharePoint environments can be searched by administrators using the EMC SourceOne Search application provided with the EMC SourceOne Management platform. 14 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

15 Introduction EMC SourceOne for Microsoft SharePoint architecture The following figure depicts an EMC SourceOne platform architecture extended to include EMC SourceOne for Microsoft SharePoint. Figure 1 EMC SourceOne architecture EMC SourceOne for Microsoft SharePoint architecture 15

16 Introduction Prerequisite installation: EMC SourceOne platform Before installing EMC SourceOne for Microsoft SharePoint software, you must first install the EMC SourceOne platform components. These components are included in the EMC SourceOne Management software kit. Specific documents include: EMC SourceOne Management Installation Guide Provides an overall description of the EMC SourceOne platform architecture and supporting components common to all environments. Includes prerequisites, accounts and permissions and system requirements. Details installation procedures for all components. Provides single sign-on configuration information. EMC SourceOne Management Release Notes Provides information on upgrading the EMC SourceOne platform components. Describes fixed issues, known issues, and additional documentation. EMC SourceOne Products Compatibility Guide Provides detailed version support information for EMC SourceOne products. 16 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

17 Introduction Accounts and permissions In addition to the platform requirements for accounts and permissions provided in the EMC SourceOne Management Installation Guide, this section provides a checklist for the tasks required to assign permissions specific to the type of Microsoft SharePoint environment you intend to support: Accounts and permissions (on-premises environments) on page 17 Accounts and permissions (cloud-based environments) on page 23 Accounts and permissions (on-premises environments) This section describes the accounts and permissions required for on-premises environments. Note: For accounts and permissions specific to a cloud-based environment, refer to Accounts and permissions (cloud-based environments) on page 23. Active directory accounts The EMC SourceOne primary service account (created when installing the EMC SourceOne platform) is also used in SharePoint environments as follows: External Blob Storage (EBS) The primary service account is the impersonation account used in SharePoint for EBS database access, local cache file access, and EBS gateway access. Archive Search The primary service account is the EMC SourceOne access account specified in the Archive Search settings in SharePoint used to accessed EMC SourceOne services. Accounts and permissions 17

18 Introduction Permissions assignment The following table provides a checklist for the tasks required to assign permissions specific to your Microsoft SharePoint environment. Note: Additional permissions required to use EMC SourceOne for Microsoft SharePoint (which are configured post-installation using SharePoint administration sites and the EMC SourceOne console) are provided in the EMC SourceOne for Microsoft SharePoint Administration Guide. 18 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

19 Introduction Table 1 Accounts and permissions - permissions assignment (1 of 4) Done Environment /System Task Details Validation SharePoint server or farm Configure installation account The installation account used to install software on a SharePoint server must be a member of the following groups: Local Administrators group for the computer on which installations are run as well as all SharePoint web front-end servers. SharePoint Farm Administrators (Full Access) group. Members of this group have full access to all settings in the farm. They can also take ownership of any content site. SharePoint Central Administration Site Collection Administrators group - configured from Central Administration > Site Actions > Site Settings > Site collection administrators. Role db_datareader, db_datawriter and permission to Execute for databases: SharePoint_Config and SharePoint_AdminContent_[GUID]. For easy configuration, EMC recommends that you use the SharePoint Service Account as this account. For example, in the following screen, the SharePoint Service Account is SOSP\administrator. Ensure you can log in using this account. After you activate the EMCES1.AdminSite Provisioning feature, you must see the 'EMC SourceOne' site in the Central Administration site collection. Figure 2 SharePoint Service Account SharePoint server or farm Configure EMC SourceOne service account The EMC SourceOne service account must be a member of the SharePoint Farm Administrators (Full Access) group. You can add the EMC SourceOne service account or the EMC SourceOne security group to the Farm Administrators group. Ensure that SharePoint activities can be created, and can successfully be completed. To access the EMC SourceOne Console, the account must have acessing permission which you can specify here: SharePoint Farm Server > Specify "Impersonate this user" >Input "Username and Password" in the Console for SharePoint Archive. SharePoint server or farm Configure Windows SharePoint Services Timer account This permission is only required if using the optional instrumentation feature for SharePoint archiving. Refer to Windows SharePoint Services Timer service account permissions on page 26 for options and considerations for configuring the permissions for this account. Check the Windows SharePoint Services Timer service configuration Accounts and permissions 19

20 Introduction Table 1 Accounts and permissions - permissions assignment (2 of 4) Done Environment /System Task Details Validation SharePoint server or farm Configure application pool identity Ensure that the user account used as the application pool identity for the archive and restore services Web application are: A member of the SharePoint Farm Administrators (Full Access) group. Has Full Control permissions on all Web applications: SharePoint 2007 or WSS configured from Central Administration > Application Management > (Application Security) > Policy for Web Application SharePoint 2010 or SharePoint configured from Central Administration > Application Management > Web Applications > Manage Web Application > User Policy Role db_datareader, db_datawriter and permission Execute for databases: SharePoint_Config and SharePoint_AdminContent_[GUID]. Role db_datareader, db_datawriter and permission Execute for all content databases. For easy configuration, EMC recommends that you use the SharePoint Service Account as this account. For example, in the following screen, the SharePoint Service Account is SOSP\administrator. Check the application pool identity and ensure that it is configured as specified. On the EMC SourceOne Console, ensure that the SourceOne service account can view farm hierarchy, can create activities, and run until sucessfully complete. Figure 3 SharePoint Service Account 20 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

21 Introduction Table 1 Accounts and permissions - permissions assignment (3 of 4) Done Environment /System Task Details Validation SharePoint server or farm Configure Job Dispatcher permissions If using Archive Search Restore ensure that the EMC SourceOne service account or EMC SourceOne security group: Is a member of the SharePoint Farm Administrators (Full Access) group. Has Full Control permissions on all Web applications: SharePoint 2007 or WSS configured from Central Administration > Application Management > (Application Security) > Policy for Web Application Check that the SharePoint Restore works. SharePoint 2010 or SharePoint configured from Central Administration > Application Management > Web Applications > Manage Web Application > User Policy Role db_datareader, db_datawriter and permission Execute for databases: SharePoint_Config and SharePoint_AdminContent_[GUID]. Role db_datareader, db_datawriter and permission Execute for all content databases. The Job Dispatcher service account must have permission to the EMC SourceOne databases. The EMC SourceOne for Microsoft SharePoint Administration Guide provides more details. For example, in the following screen, the SharePoint Service Account is SOSP\administrator. For easy configuration, EMC recommends that you use the SharePoint Service Account as this account. Figure 4 SharePoint Service Account Note: When you perform the Search and Restore function, EMC recommends that you use the SharePoint Service Account which is configured at the User Group of the specific Search Site and Data Source Site. Accounts and permissions 21

22 Introduction Table 1 Accounts and permissions - permissions assignment (4 of 4) Done Environment /System Task Details Validation SharePoint server or farm SharePoint SQL Server SharePoint SQL Server Configure Power User permissions Identify SQL Server installation account Identify SQL Server runtime account If using Archive Search Restore, configure power users (e.g., users with the ability to perform batch restores) as members of one of the following groups for the Archive Search site: Site Collection Administrators Site Owners Farm Administrators For External BLOB Storage feature only Identify a SQL Server account with permissions to create a SQL database on the SharePoint SQL Server. For External BLOB Storage feature only. During installation of the EBS feature, you will specify an account used to provide runtime access to the EBS database. You can use one of the following authentication methods: SQL Server login You can use a SQL Server login account (a non-windows account maintained on the SQL Server) to provide runtime access to the EBS database. Integrated Security You can select Integrated Security when installing the EBS feature. You can later identify an impersonation account using the EBS administration site which will be used to provide runtime access to the EBS database. Ensure account is a member of appropriate group. Ensure account is available at installation time Ensure account is available at installation time Note: The impersonation account is also used to connect to the EMC SourceOne Native Archive. For details about the impersonation account, refer to the EMC SourceOne for Microsoft SharePoint Administration Guide. EMC SourceOne console computers Configure console administrator accounts EMC SourceOne console administrators must be members of the SharePoint Farm Administrators group to browse farm topology. If you use the EMC SourceOne Admins group in your configuration, you can add this group to the Farm Administrators. Alternatively, you can add individual console users as members of the Farm Administrators group. Ensure that console user can access SharePoint farm topology from console. 22 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

23 Introduction Accounts and permissions (cloud-based environments) This section describes the accounts and permissions required for cloud-based environments. Note: For accounts and permissions specific to an on-premises environment, refer to Accounts and permissions (on-premises environments) on page 17. EMC SourceOne administrators will use the EMC SourceOne console to create a SharePoint Online Archive activity to archive content from a cloud-based SharePoint environment. In order to configure the activity, the administrator will need the following information: URL of the SharePoint online site. Credentials (username and password) for a member of the SharePoint Online Site Collection Administrators group. Accounts and permissions 23

24 Introduction System requirements This section describes system software requirements for Microsoft SharePoint servers and EMC SourceOne servers specific to the type of environment you intend to support: System requirements (on-premises environments) on page 24 System requirements (cloud-based environments) on page 25 System requirements (on-premises environments) This section describes the requirements for computers used in an EMC SourceOne for Microsoft SharePoint on-premises environment. Microsoft SharePoint Server requirements The following table describes the prerequisite software and configuration required on Microsoft SharePoint servers on which you also plan to install the EMC SourceOne for Microsoft SharePoint software. Table 2 Microsoft SharePoint Server software prerequisites Software Refer to the EMC SourceOne Products Compatibility Guide for more detailed information on supported versions of the software described in this section. A supported version of Microsoft SharePoint on an operating supported by that product Microsoft.NET Framework Redistributable Package For Microsoft SharePoint External BLOB Storage (EBS) only Required on all SharePoint web front-end servers Manually install Manually or silently install Validated by EMC SourceOne Runtime Environment (SRE) software installation Microsoft Visual C Redistributable Package (x86) Manually or silently install Validated by EMC SourceOne Runtime Environment (SRE) software installation EMC SourceOne Console client computer requirements In addition to the requirements described in the "EMC SourceOne console client computer requirements" section in the EMC SourceOne Management Installation Guide, console computers in an EMC SourceOne for Microsoft SharePoint environment must be in the same domain as the SharePoint farm. 24 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

25 Introduction System requirements (cloud-based environments) This section describes the requirements for computers used in an EMC SourceOne for Microsoft SharePoint cloud-based environments. Microsoft SharePoint Server requirements There is no prerequisite SharePoint-side software required in a cloud-based environment. EMC SourceOne worker and console computer requirements The following table describes the prerequisite software and configuration required on EMC SourceOne worker and console computers on which you intend to install support for cloud-based archiving (SharePoint Online). Table 3 EMC SourceOne worker and console software prerequisites Software Refer to the EMC SourceOne Products Compatibility Guide for more detailed information on supported versions of the software described in this section. Standard worker or console software as described in the EMC SourceOne Management Installation Guide. Microsoft Windows Identity Foundation (WIF) Refer to Provides externalization of user access for SharePoint Online environments Install the appropriate support for your specific operating system SharePoint Foundation 2010 Client Object Model Redistributable Refer to Provides client object model requirements for SharePoint Online environments Install the appropriate support for your specific operating system Secure Socket Layer (SSL) certificate Provides secure authentication of EMC SourceOne worker and console client computers to SharePoint Online Refer to Secure Socket Layer (SSL) certificates to access SharePoint Online on page 27 Manually install Manually or silently install Validated by EMC SourceOne for Microsoft SharePoint Business Component Extensions (BCE) software installation Manually or silently install Validated by EMC SourceOne for Microsoft SharePoint Business Component Extensions (BCE) software installation Manually install System requirements 25

26 Introduction Important considerations This section describes considerations for all EMC SourceOne for Microsoft SharePoint environments. Considerations (on-premises environments) Review the following considerations for on-premises environments. Note: For considerations specific to a cloud-based environment, refer to Considerations (cloud-based environments) on page 27. Windows SharePoint Services Timer service account permissions Specific permissions for the Windows SharePoint Services Timer service are required to support installation of the optional EMC SourceOne Instrumentation feature. This feature, once activated, enables performance counters and Windows Management Instrumentation (WMI) classes for management servers. You have the following options: During deployment of EMC SourceOne for Microsoft SharePoint, temporarily specify a Domain Administrator account as the Log On As account for the Windows SharePoint Services Timer service. When you activate the Archive Services feature, performance counters are installed and are set to "False". When you activate the Instrumentation feature, performance counters are set to "True". You can also choose to not activate the Instrumentation feature. You can then change the Log On As account to an account which is a member of the local Administrators group. Have the SharePoint administrator run InstallUtil.exe on each web front-end server in the farm to manually install the performance counters. Command example: %windir%\microsoft.net\framework\v \installut il.exe /AssemblyName "EMC.EX.SharePoint.Services, Version= , Culture=neutral, publickeytoken=8e9decb59936af7f" 26 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

27 Introduction Considerations (cloud-based environments) Review the following considerations for cloud-based environments. Note: For considerations specific to an on-premises environment, refer to Considerations (on-premises environments) on page 26. Secure Socket Layer (SSL) certificates to access SharePoint Online By default when you install the EMC SourceOne for Microsoft SharePoint Business Component Extensions software, a SSL certificate is required on EMC SourceOne Console client computers and worker computers to securely access SharePoint Online. Configuration setting This configuration setting is specified in a EMC.EX.SharePoint.ArchivingClient.dll.config file located in: <install_dir>\emc SourceOne\SharePoint The following line, which is commented by default, will enforce the requirement of an SSL certificate when connecting to SharePoint Online. Figure 5 SharePoint Online config file If you uncomment this line and the key remains set to "True", the certificate requirement can be bypassed. For security reasons, you should leave the line commented and require an SSL certificate to be installed on console and client computers. Important considerations 27

28 Introduction Installing an SSL certificate on console client computers You must install an SSL certificate on all EMC SourceOne console client computers on which you plan to install the EMC SourceOne for Microsoft SharePoint Business Component Extensions (BCE) software. Note: The method described in this section installs the certificate for the currently logged-in user (e.g., the EMC SourceOne administrator). To install an SSL certificate on a console client computer: 1. Open Internet Explorer and type the URL for you SharePoint Online site. Because a valid certificate is not stored, a Certificate Error displays in the browser. Figure 6 Certificate error 2. Click the Certificate Error and click View Certificates. The Certificate dialog box displays. 3. Click Install Certificates. The Certificate Import Wizard displays. 4. Click Next. 5. On the Certificate Store page, select Place all certificates in the following store and click Browse. 6. In The Select Certificate Store dialog box, select the Trusted Root Certification Authorities store as shown in the following figure. 28 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

29 Introduction Figure 7 Certificate store 7. Click Next. 8. Click Finish. The certificate is imported to the store. Installing an SSL certificate on worker computers You must install an SSL certificate on all worker computers on which you plan to install the EMC SourceOne for Microsoft SharePoint Business Component Extensions (BCE) software. This enables the worker computer to authenticate properly to perform SharePoint Online Archiving activities. The method described in this section is different than the method described for the console client computers because worker computers require the certificate be installed for the EMC SourceOne service account under which the worker services run. Note: If you log in using the EMC SourceOne service account, you can use the method described Installing an SSL certificate on console client computers on page 28. If logged in as a user other than the EMC SourceOne service account, use the following procedure import an SSL certificate to a worker computer s certificate store : Complete the steps in the "Import the Certificate into the Local Computer Store" section of this article. Important considerations 29

30 Introduction 30 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

31 2 Installing Microsoft SharePoint Support This chapter describes how to install the required and optional components of EMC SourceOne for Microsoft SharePoint. Each section in this chapter is presented in the order in which the components should be installed, as some installed components are dependent on previously installed components. This chapter is organized as follows: Installation overview Installing SharePoint support on EMC SourceOne servers SharePoint cloud-based configuration SharePoint on-premises solution deployment Maintaining the installation Note: This document uses hyperlinks to other relevant sections. You can simplify navigation by enabling an optional Web browser-like navigation feature in Adobe Acrobat Reader (version 7.0 or above). For details, see Guide to using this document on page 8. Installing Microsoft SharePoint Support 31

32 Installation overview The following table provides an overview of the EMC SourceOne for Microsoft SharePoint installations presented in the order in which you should perform them. Table 4 Installation procedure overview (1 of 2) Installation/ Configuration Details Procedure SharePoint Business Component Extensions Review cloud-based SharePoint configuration overview Review on-premises SharePoint deployment overview Verify environment variables (on-premises only) Install SharePoint archiving components (on-premises only) Install SharePoint search components (on-premises only) Install the SharePoint Business Component Extensions on all EMC SourceOne: worker computers you want to enable to process SharePoint activities computers hosting the SourceOne console For cloud-based environments, SharePoint Online Archive activity support is provided solely by installing the SharePoint Business Component Extensions in the previous step. On-premises environments only. Review the overview of the SharePoint-side deployment procedures. Verify that the Microsoft Windows system path environment variable includes the SharePoint system path for your operating system Install the SharePoint archiving administration site and archiving service in the SharePoint farm. Install the SharePoint archive search administration site and search service in the SharePoint farm. Installing SharePoint support on EMC SourceOne servers on page 34 SharePoint cloud-based configuration on page 40 SharePoint on-premises solution deployment on page 40 Configure environment variables (optional) on page 43 Deploy the Archive feature on page 44 Deploy the Archive Search feature on page EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

33 Table 4 Installation procedure overview (2 of 2) Installation/ Configuration Details Procedure Install SharePoint EBS components (on-premises only) Install the SharePoint External BLOB Storage (EBS) administration site and provider in the SharePoint farm. Note: A separate EMC SourceOne product provides support for Remote BLOB Storage (RBS). RBS is used with Microsoft SharePoint Foundation 2010 and Microsoft SharePoint Server 2010 and provides administrators with advanced options to off-load and manage storage of binary large objects from the SharePoint SQL Server. Refer to the EMC SourceOne for Microsoft SharePoint Storage Management documentation set for details. Deploy the EBS feature on page 65 Install Archive Search Restore (optional) Configure SharePoint sites and services (on-premises only) Configure SharePoint activities Install the SharePoint archive search restore service in the SharePoint farm. Use the SharePoint administration sites for archive, search and External BLOB Storage to configure settings and functionality. Use the EMC SourceOne console to configure SharePoint activities. Deploy the Archive Search Restore feature on page 61 Refer to the EMC SourceOne for Microsoft SharePoint Administration Guide. Refer to the EMC SourceOne for Microsoft SharePoint Administration Guide. Best practices for deployment EMC recommends that you follow these best practices during deployement: Deploy EMCES1.Administration.wsp and EMCES1.ArchiveSearchConfigUI.wsp to the Central Administration. As these archiving/restore operations can be very CPU/Memory consuming and should not affect the daily work, deploy EMCES1.Archiving.wsp and EMCES1.Restore.wsp to a dedicated Web Application which only does Archiving/Restore. For details on how to create a Web Application, refer to the Microsoft SharePoint documentation. Deploy EMCES1.ArchiveSearch.wsp to the Web Applications where search is required. Installation overview 33

34 Installing SharePoint support on EMC SourceOne servers The EMC SourceOne for Microsoft SharePoint Business Component Extensions (BCEs) provide support for SharePoint archiving and restore functionality on EMC SourceOne worker and console computers. You can install the following support using the BCE installer: On-premises SharePoint archiving Cloud-based SharePoint archiving Archive Search Restore For brief descriptions of this functionality, refer to Overview on page 10. For more detailed information, refer to the EMC SourceOne for Microsoft SharePoint Administration Guide. Depending on your environment, you can install one or all of the features. The BCE software is required on the following computers: Worker Services host computers that you want to enable to perform SharePoint archiving or restore activities. Computers hosting the EMC SourceOne console. Prerequisites Ensure you have reviewed and met the prerequisites specific to the type of environment you intend to support (on-premises or cloud-based) as described in the following sections: Prerequisite installation: EMC SourceOne platform on page 16 Accounts and permissions on page 17 System requirements on page 24 Important considerations on page EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

35 Procedure To install the Business Component Extensions software: 1. Log in to the host computer using an account with local administrator privileges. 2. Navigate to the SourceOneArchive directory on the EMC SourceOne for Microsoft SharePoint software kit. 3. Copy the ES1_SharePointBCESetup.exe to a temporary location on the host computer. 4. Navigate to the temporary location to which you copied the setup executable. 5. Double-click the BCE executable file and click Run. The Welcome page displays. Figure 8 Installation Welcome page Installing SharePoint support on EMC SourceOne servers 35

36 6. Click Next to display the Custom Setup page. Figure 9 Custom Setup 7. Select installation options for the following features: SharePoint Online Archiving - This feature, which supports cloud-based SharePoint archiving, is not installed by default. Click the dropdown icon to select the appropriate installation option. SharePoint Archiving - This feature supports on-premises archiving and is installed by default. Click the dropdown icon to change installation options. SharePoint Restore - This feature supports Archive Search Restore functionality. Click the dropdown icon to change installation options. 8. Optionally, you can click Help to provide descriptions of installation options. 9. If you select the optional SharePoint Online Archiving feature, the installer checks for SharePoint Online Archiving prerequisite software (described in System requirements (cloud-based environments) on page EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

37 a. If the prerequisites are not met, the following warning message displays. Figure 10 SharePoint Online Archiving perequisite warning b. Cancel the installation and ensure that you meet the prerequisite installations before continuing. 10. Click Next to display the Security Group page. Figure 11 Security Group 11. Since you are installing the BCE software on an existing EMC SourceOne console or worker computer, the Domain and Security Group information was previously established. Click Next to accept the default Domain and Security Group. Installing SharePoint support on EMC SourceOne servers 37

38 12. Click Next to display the Working Directory page. Figure 12 Working Directory 13. Specify a temporary work directory and click Install. Note the following: This directory is required to perform processing related to: SharePoint Online Archiving SharePoint Restore The directory must be specified as a UNC share location. If you are installing the BCE software on multiple computers, ensure that you specify the same UNC share location for all computers. The EMC SourceOne Security Group must have Read and Write permissions for this UNC share location. Ensure that the directory has adequate free space (recommended to be at least 20 GB). 14. Click Next to display the Ready to Install page. 15. Click Install. 16. When the installation is completed, click Finish. 38 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

39 17. Repeat this procedure on the remaining SourceOne worker and console computers. Post-installation Restart the EMC SourceOne Job Dispatcher service on all worker computers on which you installed the BCE software. Installing SharePoint support on EMC SourceOne servers 39

40 SharePoint cloud-based configuration If you are configuring a cloud-based environment, support for this environment is provided solely through the EMC SourceOne for Microsoft SharePoint Business Component Extensions software you installed on the worker and console computers as described in Installing SharePoint support on EMC SourceOne servers on page 34. You are now ready to configure and perform SharePoint Online Archive activities. Refer to the EMC SourceOne for Microsoft SharePoint Administration Guide for details on performing this type of activity. SharePoint on-premises solution deployment This section describes how to install software on SharePoint servers in an on-premises environment.! IMPORTANT If you are configuring a cloud-based environment, there are no SharePoint-side components to install. Refer to SharePoint cloud-based configuration on page 40 for details. EMC SourceOne SharePoint on-premises features are installed by deploying SharePoint solutions (contained in.wsp files) to SharePoint Web applications. Some solutions are targeted for the SharePoint Central Administration web application, while others are targeted at the web front-end (WFE) servers in your SharePoint environment. Once the solutions are deployed, you will specify some connection information and configuration settings for the EMC SourceOne environment to enable it process SharePoint-related activities. This section includes the following topics: Solution deployment process on page 41 Solution types on page 41 Localization on page 42 Upgrading a solution on page 42 Where to run installs on page EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

41 Permissions on page 43 Configure environment variables (optional) on page 43 Deploy the Archive feature on page 44 Deploy the Archive Search feature on page 54 Deploy the Archive Search Restore feature on page 61 Deploy the EBS feature on page 65 Solution deployment process The solution deployment process in the SharePoint environment includes: Adding a solution to the SharePoint solution store You add the EMC SourceOne solutions to the SharePoint solution store using the STSADM command line administration tool. The solution store provides a centralized collection of all SharePoint solutions available for the server farm. Deploying the solution from the solution store After adding the solution to the solution store, you deploy it to web applications or web front-end servers using the SharePoint Central Administration console. The solution is considered fully-deployed once it is synchronized to all applicable servers in the farm. Solution types EMC SourceOne for Microsoft SharePoint features are deployed using two types of solutions: Central Administration web applications These solutions deploy custom administration sites for EMC SourceOne for Microsoft SharePoint features. The solutions are targeted at the server hosting the Central Administration site. solutions include: emces1.administration.wsp Administration site for the Archive feature emces1.archivesearchconfig.wsp Administration site for the Archive Search Configuration settings feature emces1.ebsprovider.wsp Administration site for the External BLOB Storage feature SharePoint on-premises solution deployment 41

42 Content web applications These solutions deploy the web applications to support the EMC SourceOne for Microsoft SharePoint features to web front-end servers in your SharePoint environment. This can be a single web front-end server, or a farm including multiple web front-end servers. Solutions include: emces1.archiving.wsp Web application for the Archive feature emces1.archivesearch.wsp Web application for the Archive Search feature emces1.restore.wsp Web application for the Archive Search Restore feature Localization Localization for supported languages is deployed using the solution deployment method. In a foreign language environment, you can deploy a localized solution when you first install the product (e.g., the primary language is non-english). Alternatively, you can add support for multiple languages by deploying a corresponding language pack solution after an initial English solution is deployed. For detailed instructions on deploying language packs for supported languages, refer to the EMC SourceOne Localized Product Release Notes. Upgrading a solution Upgrading a solution replaces a previous version of a solution with a current version of the solution. Refer to the Maintaining the installation on page 77 for information on upgrading SharePoint solutions. Where to run installs All SharePoint solution deployments can be run from a single web front-end server. The solutions are distributed to other servers using SharePoint s internal distribution mechanisms. For the EBS feature, you manually run installs on specific computers in your environment. Specific information about running these installations is provided in the procedures that follow. 42 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

43 Permissions Refer to Accounts and permissions on page 17 to ensure the appropriate permissions are established. Configure environment variables (optional) For convenience, you can modify the Microsoft Windows system path environment variable to include the SharePoint system path for your operating system. 1. Right-click My Computer. 2. Do one of the following: On Windows Server Select Properties > Advanced. On Windows Server Select Properties > Advanced system settings. 3. Click Environment Variables. 4. In the System Variables section, click the Path variable and click Edit. 5. Check that a SharePoint system path exists for your operating system. If necessary, append the following system variable, depending on the version of SharePoint you are using: If you are running SharePoint 2007 or WSS 3.0: C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\bin; If you are running SharePoint 2010: C:\Program Files\Common Files\Microsoft Shared\web server extensions\14\bin; If you are running SharePoint 2013: C:\Program Files\Common Files\Microsoft Shared\web server extensions\15\bin; 6. Click OK on all open dialog boxes to apply the changes. SharePoint on-premises solution deployment 43

44 Deploy the Archive feature This section describes how to install the following EMC SourceOne solutions on Microsoft SharePoint servers to support SharePoint archiving: Deploy the Archive Administration site Deploy the Archive content web application Deploy the Archive Administration site Deploying this solution to the Central Administration host computer provides a customized user interface for administrators to configure EMC SourceOne features in SharePoint. This administration site is a prerequisite for other SharePoint features. Deployment includes the following procedures: Add solution to the store Deploy the solution Optional: Deploy language pack solution(s) Activate features Restart IIS Validate the deployment Next steps Add solution to the store Add the solution to the solution store: 1. Copy the SourceOneArchive directory on the EMC SourceOne for Microsoft SharePoint software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd. Note: You must run as Administrator. 3. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS 3.0 or SharePoint Navigate to: SourceOneArchive\SourceOneAdmin\SharePoint2007_2010 SharePoint Navigate to: SourceOneArchive\SourceOneAdmin\SharePoint Type the following command: stsadm -o addsolution -filename EMCES1.Administration.wsp 44 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

45 Deploy the solution From the Central Administration site: 1. Depending on your SharePoint version: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 2. Click emces1.administration.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Select the Central Administration Web application (e.g., 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.administration.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. SharePoint on-premises solution deployment 45

46 Install one or more language packs as part of the initial installation (prior to activating features). To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. Note: You must run as Administrator. 3. Navigate to the temporary location. 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the EMC SourceOne administration site, use the following command: stsadm -o addsolution -filename EMCES1.Administration.wsp -lcid Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the administration site is displayed as follows: emces1.administration.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure 46 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

47 Activate features The site provisioning feature is a hidden feature which can only be activated using an stsadm command: 1. Click Start > Run and type cmd Note: You must runs as Administrator. 2. Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Navigate to SourceOneArchive\SourceOneAdmin\SharePoint2007_2010 SharePoint Navigate to SourceOneArchive\SourceOneAdmin\SharePoint Type the following command: stsadm -o activatefeature -filename EMCES1.AdminSiteProvisioning\feature.xml Restart IIS Restart IIS using the iisreset /noforce command. Note: If you choose to not force the restart of IIS at this time, you must restart it at a later time to complete the configuration. Validate the deployment To validate the deployment: 1. Navigate to the Central Administration home page. 2. Verify that an EMC SourceOne tab is now displayed. Figure 13 EMC SourceOne tab 3. Click the EMC SourceOne tab. The EMC SourceOne administration site displays. Next steps Refer to Deploy the Archive content web application on page 48. SharePoint on-premises solution deployment 47

48 Deploy the Archive content web application Deploy the Web application which provides the EMC SourceOne archiving functionality for Microsoft SharePoint. Deployment includes the following procedures: Add solution to the store Restart IIS Deploy the solution Optional: Deploy language pack solution(s) Activate features Validate the deployment Next steps Add solution to the store Add the solution to the solution store: 1. Copy the SourceOneArchive directory on the EMC SourceOne for Microsoft SharePoint software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd Note: You must run as Administrator. 3. Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Navigate to: SourceOneArchive\SourceOneAdmin\SharePoint2007_2010 SharePoint Navigate to: SourceOneArchive\SourceOneAdmin\SharePoint Type the following command: stsadm -o addsolution -filename EMCES1.Archiving.wsp Restart IIS Restart IIS using the iisreset /noforce command. 48 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

49 Deploy the solution From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 2. Click emces1.archiving.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Select All content web application. SharePoint Select the content web application created by SharePoint 2013 Management Shell. Can only deploy on the web application created by following sample script: New-SPWebApplication -Name "WebAppName" -ApplicationPool "WebAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "domain\spmanageraccount") -Port 80 -URL "WebAppURL" Replace the parameters "WebAppName", "WebAppPool", "domain\spmanageraccount", and "WebAppURL" with the related value in the production environment. SharePoint on-premises solution deployment 49

50 Note: The web application in SharePoint 2013 obsoletes the Windows classic authentication, and uses the authentication based on claim. All web applications created by SharePoint 2013 Central Admin UI are based on claim authentication. This means the original SharePoint archive service and restore service cannot host on these web applications. Microsoft also provides the following script to create a web application based on windows classic authentication on SharePoint 2013, so archive service and restore service could host on this web application to make sure it could be access. Before you deploy these two services, you must create a web application based on the Windows classic authentication. 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.archiving.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Install one or more language packs as part of the initial installation (prior to activating features). To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. Note: You must run as Administrator. 3. Navigate to the temporary location. 50 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

51 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the content web application, use the following command: stsadm -o addsolution -filename EMCES1.Archiving.wsp -lcid Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the archiving services site is displayed as follows: emces1.archiving.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure. Activate features From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Features. SharePoint on-premises solution deployment 51

52 2. Determine whether you want to activate the following optional features: EMC SourceOne Instrumentation - enables performance counters and Windows Management Instrumentation (WMI) classes for management servers.! IMPORTANT Only activate this feature if necessary. Activating this feature will result in a significant performance impact. EMC SourceOne Archive Logging Figure 14 Manage Farm Features 3. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Application Management (SharePoint Web Application Management) > Manage Web Application Features. SharePoint 2010 or SharePoint Navigate to Central Administration > Application Management > Web Applications > Manage Web Applications > Manage Features. 4. Activate EMC SourceOne Services.! IMPORTANT Ensure that you activate this feature on one Web application only. Figure 15 Manage Web Application Features 52 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

53 Validate the deployment To validate the deployment: 1. Open a Web browser session. 2. Navigate to the site: If using the default port (80), navigate to: archive.svc If using a port other than the default (80), include the port number: archive.svc Figure 16 ArchiveService Service 3. Follow the instructions on the displayed page to test the service. Next steps The archiving functionality provided with EMC SourceOne for Microsoft SharePoint is now installed and ready for configuration. Refer to the "Overview of SharePoint Archiving and EBS" chapter in the EMC SourceOne for Microsoft SharePoint Administration Guide for details on configuring Archive features. SharePoint on-premises solution deployment 53

54 Deploy the Archive Search feature This section describes how to install the following EMC SourceOne components on Microsoft SharePoint servers to support searches of archived content from SharePoint: Deploy the Archive Search administration site Deploy the Archive Search content Web application Deploy the Archive Search administration site Deploying this solution provides a customized user interface for administrators to configure EMC SourceOne features in SharePoint. Deployment includes the following procedures: Add solution to the store Deploy the solution Optional: Deploy language pack solution(s) Activate features Restart IIS Validate the deployment Next steps Add solution to the store Add the solution to the solution store: 1. Copy the SourceOneSearch directory on the EMC SourceOne for Microsoft SharePoint software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd Note: You must run as Administrator. 3. Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Navigate to SourceOneSearch\ArchiveSearchConfigUI\SharePoint2007 _2010 SharePoint Navigate to SourceOneSearch\ArchiveSearchConfigUI\SharePoint Type the following command: stsadm -o addsolution -filename EMCES1.ArchiveSearchConfigUI.wsp 54 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

55 Deploy the solution From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 2. Click emces1.archivesearchconfigui.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Select the Central Administration Web application (e.g., 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.archivesearchconfigui.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Install one or more language packs as part of the initial installation (prior to activating features). SharePoint on-premises solution deployment 55

56 To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. Note: You must run as Administrator. 3. Navigate to the temporary location. 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the EMC SourceOne search configuration site, use the following command: stsadm -o addsolution -filename EMCES1.ArchiveSearchConfigUI.wsp -lcid Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the search configuration site is displayed as follows: emces1.archivesearchconfigui.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure. 9. To ensure the language pack resources are copied, use the following command: stsadm -o activatefeature -filename EMCES1.ArchiveSearchConfigUI\feature.xml -force 56 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

57 Activate features From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Manage Farm Features. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Features. 2. Verify that the EMC SourceOne Archive Search Configuration feature is activated. Figure 17 ENC SourceOne Archive Search Configuration Restart IIS Restart IIS using the iisreset /noforce command. Note: If you choose to not force the restart of IIS at this time, you must restart it at a later time to complete the configuration. Validate the deployment To validate the deployment: 1. Navigate to the Central Administration home page. 2. Click the EMC SourceOne tab. The EMC SourceOne administration site displays. 3. Ensure the Archive Search settings are displayed. SharePoint on-premises solution deployment 57

58 Next steps Refer to Deploy the Archive Search content Web application on page 58. Deploy the Archive Search content Web application Deploy the Web application which provides the EMC SourceOne archive search functionality for Microsoft SharePoint. Deployment includes the following procedures: Add solution to the store Deploy the solution Optional: Deploy language pack solution(s) Activate features Restart IIS Validate the deployment Next steps Add solution to the store Add the solution to the solution store: 1. Copy the SourceOneSearch directory on the EMC SourceOne for Microsoft SharePoint software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd Note: You must run as Administrator. 3. Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Navigate to SourceOneSearch\ArchiveSearch\SharePoint2007_2010. SharePoint Navigate to SourceOneSearch\ArchiveSearch\SharePoint Type the following command: stsadm -o addsolution -filename EMCES1.ArchiveSearch.wsp Deploy the solution Note: Due to an issue with deploying the solution from the Central Administration site, use the following alternative procedure to deploy the solution using the stsadm command. 58 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

59 To deploy the solution: 1. Click Start > Run and type cmd Note: You must run as Administrator. 2. Type the following command: stsadm -o deploysolution -name EMCES1.ArchiveSearch.wsp -allowgacdeployment -immediate -url content_web_application_url Note: If you want to deploy this solution to all content web applications, you can use -allcontenturls instead of -url content_web_application_url Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Install one or more language packs as part of the initial installation (prior to activating features). To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. Note: You must run as Administrator. 3. Navigate to the temporary location. SharePoint on-premises solution deployment 59

60 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the EMC SourceOne administration site, use the following command: stsadm -o addsolution -filename EMCES1.ArchiveSearch.wsp -lcid Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the administration site is displayed as follows: emces1.archivesearch.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. To ensure the language pack resources are copied, use the following command: stsadm -o activatefeature -filename EMCES1.ArchiveSearchCore\feature.xml -force 9. If you have additional language packs to deploy, repeat this procedure Activate features You can optionally activate the Archive Search Web Parts feature after deploying the Archive Search content Web application. This feature, activated at the Site Collection level, enables you to create a custom site by adding the EMC SourceOne Archive Search web part to a web page. For more information about using web parts, refer to the Microsoft SharePoint documentation set. 60 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

61 Restart IIS Restart IIS using the iisreset /noforce command. Note: If you choose to not force the restart of IIS at this time, you must restart it at a later time to complete the configuration. Validate the deployment To validate the deployment: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Click Site Actions > Create. The Create page displays. SharePoint 2010 or SharePoint Click Application Management > Create Site Collections > Template Selection > EMC SourceOne > EMC SourceOne Archive Search Center. The EMC SourceOne Archive Search Center template displays. 2. In the Template Selection area, confirm that an EMC SourceOne template is provided. Next steps The Archive Search functionality provided with EMC SourceOne for Microsoft SharePoint is now installed and ready for configuration. Deploying the Archive Search content Web application installs the Archive Search template and web parts, which you use to create the Archive Search site. Refer to the "Configuring Archive Search for Microsoft SharePoint" chapter in the EMC SourceOne for Microsoft SharePoint Administration Guide for details on configuring Archive Search features. Deploy the Archive Search Restore feature Deploy the Web application which provides the EMC SourceOne Archive Search Restore functionality for Microsoft SharePoint. Deployment includes the following procedures: Add solution to the store Restart IIS Deploy the solution Activate features Validate the deployment Next steps SharePoint on-premises solution deployment 61

62 Add solution to the store Add the solution to the solution store: 1. Copy the SourceOneRestore directory on the EMC SourceOne for Microsoft SharePoint software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd Note: You must run as Administrator. 3. Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Navigate to SourceOneRestore\Restore\SharePoint2007_2010 SharePoint Navigate to SourceOneRestore\Restore\SharePoint Type the following command: stsadm -o addsolution -filename EMCES1.Restore.wsp Deploy the solution From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 2. Click emces1.restore.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 62 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

63 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Depending on your SharePoint version: SharePoint 2007 or WSS 3.0 or SharePoint Select All content web application. SharePoint Select the content web application created by SharePoint 2013 Management Shell. Can only deploy on the web application created by following sample script: New-SPWebApplication -Name "WebAppName" -ApplicationPool "WebAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "domain\spmanageraccount") -Port 80 -URL "WebAppURL" Replace the parameters "WebAppName", "WebAppPool","domain\spmanageraccount", and "WebAppURL" with the related value in the production environment. Deploy the Archive content web application on page 48 provides more details. 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.restore.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Install one or more language packs as part of the initial installation (prior to activating features). SharePoint on-premises solution deployment 63

64 To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. Note: You must run as Administrator. 3. Navigate to the temporary location. 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the EMC SourceOne administration site, use the following command: stsadm -o addsolution -filename EMCES1.Restore.wsp -lcid Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint 2010 or SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Solutions. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the administration site is displayed as follows: emces1.restore.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure. 64 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

65 Activate features Restart IIS Validate the deployment From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Application Management (SharePoint Web Application Management) > Manage Web Application. SharePoint 2010 or SharePoint Navigate to Central Administration > Application Management > Web Applications > Manage Features. 2. Activate the EMC SourceOne Restore Services feature. Restart IIS using the iisreset /noforce command. To validate the deployment, access the following location to validate that the service is ready: Next steps Ensure that the web application pool identity of the Restore services has permission to read the SharePoint BCE temporary work directory you configured when installing the BCE software as described in Installing SharePoint support on EMC SourceOne servers on page 34. Deploy the EBS feature This section describes how to install the following EMC SourceOne components on Microsoft SharePoint servers to support SharePoint External BLOB Storage (EBS): Install the EMC SourceOne Runtime Environment (SRE) Ensure the Archive administration site is installed Install the EBS Provider Deploy the EBS Provider administration site Configure Native Archive database permissions In addition to the permissions described in the EMC SourceOne for Microsoft SharePoint Administration Guide (specifically the "Configuring External BLOB Storage (EBS)" chapter), the EBS SharePoint on-premises solution deployment 65

66 impersonation account must have the following permissions on the Native Archive database: db_datareader db_datawriter Install the EMC SourceOne Runtime Environment (SRE) The EMC SourceOne Runtime Environment (SRE) is required on all Microsoft SharePoint web front-end servers you intend to use with the External BLOB Storage feature. The SRE provides a runtime environment required for document management applications to function on your SharePoint servers.! IMPORTANT You must install the SRE on all SharePoint web front-end servers in your SharePoint farm. To install the SRE: 1. Log in to the host computer using an account with local administrator privileges. 2. Navigate to the SourceOneEBSProvider folder. 3. Copy the ES1_SRESetup.exe executable to a temporary location on the host computer. 4. Navigate to the temporary location to which you copied the setup executable. 5. Double-click the ES1_SRESetup.exe file and click Run. The Welcome page displays. 6. Click Next to display the Destination Folder page. 7. Specify a destination and click Next to display the Ready to Install page. 8. Click Install. 9. When the installation is completed, click Finish. 10. Repeat this procedure for each Microsoft SharePoint web front-end server in the farm. 66 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

67 Ensure the Archive administration site is installed The EBS Provider requires that the SharePoint Archive administration site exist before installing the EBS Provider administration site. The prerequisite software depends on your deployment scenario: If using both the EBS Provider feature and SharePoint Archive feature in your environment, install the SharePoint Archive service software and Archive administration site as described in Deploy the Archive feature on page 44. If using only the EBS Provider, or the EBS Provider and Archive Search, you do not need the Archive service. Install only the Archive administration site as described in Deploy the Archive Administration site on page 44. Install the EBS Provider! Install the EBS Provider software which provides the EMC SourceOne External BLOB Storage functionality for Microsoft SharePoint. IMPORTANT You must install the EBS Provider software on all SharePoint web front-end servers in your SharePoint farm. Prerequisites Ensure the following: You have installed the EMC SourceOne Runtime Environment o all SharePoint web front-end servers in the farm as described in Install the EMC SourceOne Runtime Environment (SRE) on page 66. You have already deployed the Archive administration site as described in Ensure the Archive administration site is installed on page 67. SharePoint on-premises solution deployment 67

68 Ensure you have appropriate permissions to install the software and create a SQL database as described in one of the following scenarios: You are logged in to the SharePoint web front-end server with an account which has local administrator privileges and permissions to create a database on the SharePoint SQL Server. You are logged in to the SharePoint web front-end server with an account which has local administrator privileges and have access to credentials which can be entered when installing the database. Install provider software Perform this procedure on each SharePoint server in the farm. 1. Log in to the host computer using an account with privileges as described in Prerequisites on page Navigate to the SourceOneEBSProvider\EBSProvider folder on the EMC SourceOne for Microsoft SharePoint software kit and copy it locally. 3. Open the folder appropriate for your environment: x64 64-bit operating system x86 32-bit operating system 4. Double-click setup.exe. The Welcome page displays. Figure 18 Welcome page EMC SourceOne EBS Provider 68 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

69 5. Click Next to display the Select Installation Folder page. Figure 19 Select Installation Folder 6. Accept the default location or click Browse to choose another location. 7. Click Next. The Confirm Installation page displays. Figure 20 Confirm Installation SharePoint on-premises solution deployment 69

70 8. Click Next to install the software. The Installation Complete page displays. Figure 21 Installation Complete 9. Click Close. Run the EBS Provider Database Creator utility Perform this procedure only once (after you install the first instance of the EBS Provider software) to create the EBS database on the SharePoint SQL Server. Note the following: You install the database by running the EBS Provider Database Creator utility which is created when you install the EBS Provider software on a SharePoint web front-end server. You can run the utility from the web front-end server on which you installed the EBS Provider software. Perform this procedure only once to create the database. 70 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

71 To install the database: 1. Click Start > All Programs > EMC SourceOne EBS Provider > EMC SourceOne EBS Provider Database Creator. The SourceOne EBS Database Configuration page displays. Figure 22 SourceOne EBS Database Configuration a. Complete the SQL Server section. The SQL Server must be accessible to all SharePoint web front-end servers. Use the dropdown menu to select a SharePoint SQL Server or type a SQL Server location. b. Complete the Login Credentials section. These are the runtime credentials used to access the EBS database. Note: These are not the credentials used to create the database. You will create the database later in this procedure. Configure one of the following: Integrated Security The EBS impersonation account (configured later using the EBS administration site) will be used for runtime access to the EBS database SQL Login This SQL Server login account will be used for runtime access to the EBS database SharePoint on-premises solution deployment 71

72 c. Complete the Database section. The default database name displayed is ES1EBSDB appended by the current SharePoint farm GUID to form a unique database name. Do one of the following: Accept the default name. Type a name. Note: Ensure that each SharePoint farm has a unique database. 2. Click Create New Database. The Database Administrator Login page displays. Figure 23 Database Administrator Login 3. Use this page to configure the credentials to install the database. Choose one of the following: If you are logged in as a user with permissions to create SQL databases, select Current Desktop User. If you want to enter SQL credentials with permissions to create a database, select SQL Login and type the User Name and Password. Note: These credentials are only used to create the database, not for runtime access. You configured the runtime credentials in Step Click Continue to create the database and all required tables and indexes. A success message displays when the database installation is complete. 72 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

73 Figure 24 SourceOne EBS Database Configuration 5. Click OK. The utility exits. Deploy the EBS Provider administration site Deploying this solution provides a customized user interface for administrators to configure EMC SourceOne features in SharePoint. Deployment includes the following procedures: Add solution to the store Deploy the solution Optional: Deploy language pack solution(s) Restart IIS Validate the deployment Next steps Add solution to the store Add the solution to the solution store: 1. Copy the EBSProviderConfigUI directory on the EMC SourceOne for Microsoft SharePoint software kit to a temporary location on the host computer. 2. Click Start > Run and type cmd 3. Navigate to the SourceOneEBSProvider\EBSProviderConfigUI folder. 4. Type the following command: stsadm -o addsolution -filename EMCES1.EBSProvider.wsp SharePoint on-premises solution deployment 73

74 Deploy the solution From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Features. 2. Click emces1.ebsprovider.wsp in the Name column. The Solution Properties page displays. 3. Click Deploy Solution. The Deploy Solution page displays. 4. Make any desired changes to the following sections: Deploy When? You can choose to deploy now, or specify a later date and time. Deploy To? Select the Central Administration Web application (e.g., 5. Click OK. The Solution Management page displays. Ensure the Status column displays Deployed. 6. Click emces1.ebsprovider.wsp in the Name column. The Solution Properties page displays providing details about the deployed solution. Optional: Deploy language pack solution(s) SharePoint-side language pack solutions are available to provide localized SharePoint user interfaces for supported languages. Note: You can choose to install one or more language packs at a later time (after initial installation and activation of SharePoint features). Refer to the section on installing SharePoint-side language packs in an existing installation in the EMC SourceOne Localized Products Release Notes. Install one or more language packs as part of the initial installation (prior to activating features). To install language packs during initial installation: 1. Copy the folder containing the language packs a temporary location on the SharePoint server. 2. Click Start > Run and type cmd. 74 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

75 3. Navigate to the temporary location. 4. Type the following command: stsadm -o addsolution -filename wsp_file -lcid lcid_number For example, to install the French language pack for the EMC SourceOne administration site, use the following command: stsadm -o addsolution -filename EMCES1.Administration.wsp -lcid Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Solution Management. SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Features. 6. Click the language pack solution.wsp file to display the Solution Properties page. The language pack solution is listed with the LCID appended in parentheses. For example, the French language pack for the administration site is displayed as follows: emces1.administration.wsp(1036) 7. Click Deploy Solution to deploy the language pack. 8. If you have additional language packs to deploy, repeat this procedure. Activate features From the Central Administration site: 1. Depending on your SharePoint version, do one of the following: SharePoint 2007 or WSS Navigate to Central Administration > Operations > (Global Configuration) > Manage Farm Features. SharePoint Navigate to Central Administration > System Settings > Farm Management > Manage Farm Features. 2. Verify that the EMC SourceOne EBS Provider Configuration feature is activated. SharePoint on-premises solution deployment 75

76 Restart IIS Restart IIS using the iisreset /noforce command. Note: If you choose to not force the restart of IIS at this time, you must restart it at a later time to complete the configuration. Validate the deployment To validate the deployment: 1. Navigate to the Central Administration home page. 2. Click the EMC SourceOne tab. The EMC SourceOne administration site displays. 3. Ensure the EBS Provider settings are displayed. For information on configuring settings, refer to the "SharePoint archiving-specific information" section in the EMC SourceOne for Microsoft SharePoint Administration Guide. Next steps Refer to the "Configuring SharePoint External BLOB Storage (EBS)" chapter in the EMC SourceOne for Microsoft SharePoint Administration Guide for details on configuring EBS features and activities. Troubleshooting Follow these recommendations to troubleshoot installation issues: If the deployed solution or activate feature failes, use the -force parameter. If the deployment does not work because the deployment job has not been picked up by Timer Service, restart the SharePoint Timer Service on all your SharePoint servers. 76 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

77 Maintaining the installation This section provides information on maintaining installation of the components described in this chapter. Remove a component To remove (uninstall) an MSI-based EMC SourceOne product component that is installed on a Microsoft Windows system: 1. Access the Microsoft Windows Add or Remove Programs dialog box. 2. Select the appropriate component and click Remove. 3. Follow the prompts to remove the component. Repair the EMC SourceOne for Microsoft SharePoint BCE installation Repairing a Microsoft Windows component can fix missing or corrupt files, shortcuts, and registry entries. To repair the EMC SourceOne for Microsoft SharePoint BCE that is installed on a Microsoft Windows system: 1. Access the Microsoft Windows Add or Remove Programs dialog box. 2. Select the appropriate component and click Change. 3. Follow the prompts to repair the component. Modifying the EMC SourceOne for Microsoft SharePoint BCE installation You can modify the EMC SourceOne for Microsoft SharePoint BCE to add or remove the features supported by the BCE installer: On-premises SharePoint archiving Cloud-based SharePoint archiving Archive Search Restore Maintaining the installation 77

78 To modify the EMC SourceOne for Microsoft SharePoint BCE that is installed on a Microsoft Windows system: 1. Access the Microsoft Windows Add or Remove Programs dialog box. 2. Select the appropriate component and click Change. 3. Click Modify. 4. Follow the prompts to add or remove features. For details on specific installation options, refer to Installing SharePoint support on EMC SourceOne servers on page 34. Upgrading.wsp solutions Refer to the product release notes for information on upgrading.wsp solutions. 78 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

79 3 Uninstalling Microsoft SharePoint Support This chapter describes how to uninstall the required and optional components of EMC SourceOne for Microsoft SharePoint. This chapter is organized as follows: Uninstallation overview Uninstalling SharePoint by using a command script Uninstalling SharePoint by using the user interface Uninstalling Microsoft SharePoint Support 79

80 Uninstalling Microsoft SharePoint Support Uninstallation overview There are two ways by which you can uninstall Sharepoint. They are as follows: Uninstalling SharePoint by using a command script on page 81 Uninstalling SharePoint by using the user interface on page 84 Prerequisites Ensure you review the following prerequisites before you uninstall: Accounts and permissions on page 17 Important considerations on page 80 Important considerations Once you have uninstalled the products, and all the activity data is removed from EMC SourceOne site, you must perform a backup. 80 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

81 Uninstalling Microsoft SharePoint Support Uninstalling SharePoint by using a command script To uninstall SharePoint by using a command script, perform the following steps: 1. Go to Deactivate feature > uninstall feature > retract solution > delete solution. 2. For EMCES1.Administration.wsp, in the command prompt, type the following: stsadm -o deactivatefeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.AdminSiteElements\feature.xml -force stsadm -o retractsolution -name EMCES1.Administration.wsp -url AdminSiteUrl -immediate -force stsadm -o deletesolution -name EMCES1.Administration.wsp IISRESET /noforce Replace AdminSiteUrl with the Central Administration Site URL (For example, 3. For EMCES1.Archiving.wsp, in the command prompt, type the following: stsadm -o deactivatefeature -filename EMCES1.Services\feature.xml -url ArchiveRestoreServiceSiteUrl -force stsadm -o deactivatefeature -filename EMCES1.Instrumentation\feature.xml -force stsadm -o deactivatefeature -filename EMCES1.Logging\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.Services\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.Instrumentation\feature.xml -force Uninstalling SharePoint by using a command script 81

82 Uninstalling Microsoft SharePoint Support stsadm -o uninstallfeature -filename EMCES1.Logging\feature.xml -force stsadm -o retractsolution -name EMCES1.Archiving.wsp -url ArchiveRestoreServiceSiteUrl -immediate -force stsadm -o deletesolution -name EMCES1.Archiving.wsp IISRESET /noforce Replace ArchiveRestoreServiceSiteUrl with the Dedicated Archiving/Restore Site URL (For example, 4. For EMCES1.ArchiveSearchConfigUI.wsp, in the command prompt, type the following: stsadm -o deactivatefeature -filename EMCES1.ArchiveSearchConfig\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.ArchiveSearchConfig\feature.xml -force stsadm -o retractsolution -name EMCES1.ArchiveSearchConfigUI.wsp -url AdminSiteUrl -immediate -force stsadm -o deletesolution - name EMCES1.ArchiveSearchConfigUI.wsp IISRESET /noforce Replace AdminSiteUrl with the Central Administration Site URL (For example, 5. For EMCES1.ArchiveSearch.wsp, in the command prompt, type the following: stsadm -o deactivatefeature -filename EMCES1.ArchiveSearchCore\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.ArchiveSearchCore\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.ArchiveSearchWebParts\feature.xml -force 82 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

83 Uninstalling Microsoft SharePoint Support stsadm -o retractsolution -name EMCES1.ArchiveSearch.wsp -allcontenturls -immediate -force stsadm -o deletesolution -name EMCES1.ArchiveSearch.wsp IISRESET /noforce 6. For EMCES1.Restore.wsp, in the command prompt,type the following: stsadm -o deactivatefeature -filename EMCES1.RestoreServices\feature.xml -url ArchiveRestoreServiceSiteUrl -force stsadm -o uninstallfeature -filename EMCES1.RestoreServices\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.Restore\feature.xml -force stsadm -o retractsolution -name EMCES1.Restore.wsp -url ArchiveRestoreServiceSiteUrl -immediate -force stsadm -o deletesolution -name EMCES1.Restore.wsp IISRESET /noforce Replace ArchiveRestoreServiceSiteUrl with the Dedicated Archiving/Restore Site URL (For example, Uninstalling SharePoint by using a command script 83

84 Uninstalling Microsoft SharePoint Support Uninstalling SharePoint by using the user interface To uninstall SharePoint, go to All Programs > Microsoft SharePoint 2010 Products > SharePoint 2010 Central Administration, and Login via the SharePoint Service Account. To uninstall SharePoint by using the user interface: 1. You must first Deactivate features. a. Go to Central Administration > System Settings > Manage farm features. b. Click Deactivate, to deactivate the SourceOne Archive Logging, EMC SourceOne Archive Search Configuration, and EMC SourceOne Instrumentation farm features. Figure 25 Deactivating Farm Features c. Then go to Central Administration > Application Management > Manage web applications. d. Select the dedicated Web Application where the Archiving/Restore wsps is deployed to. For example, SharePoint e. Click Manage Features in the Ribbon, the Manage Web Application Features dialog appears. 84 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

85 Uninstalling Microsoft SharePoint Support f. Click Deactivate to deactivate the EMC SourceOne Restore Services, and EMC SourceOne Services Web Application features. Figure 26 Deactivate Web Application features 2. Run the following scripts in the command prompt: a. To deactivate hidden features. stsadm -o deactivatefeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o deactivatefeature -filename EMCES1.ArchiveSearchCore\feature.xml -force b. To uninstall features: stsadm -o uninstallfeature -filename EMCES1.AdminSiteProvisioning\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.AdminSiteElements\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.Services\feature.xml -force Uninstalling SharePoint by using the user interface 85

86 Uninstalling Microsoft SharePoint Support stsadm -o uninstallfeature -filename EMCES1.Instrumentation\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.Logging\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.ArchiveSearchConfig\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.ArchiveSearchCore\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.ArchiveSearchWebParts\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.RestoreServices\feature.xml -force stsadm -o uninstallfeature -filename EMCES1.Restore\feature.xml -force 3. Go to Central Administration > System Settings > Manage farm solutions to retract solutions. The solutions list appears. Figure 27 Manage farm solutions 86 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

87 Uninstalling Microsoft SharePoint Support For emces1.administration.wsp and emces1.archivesearchconfigui.wsp: a. Click either solution, the Solution Properties page appears. Click Retract Solution the Retract Solution page appears. Figure 28 Retracting Solutions b. On the Retract Solution page, specify when to retract the solution either Now or At a specified time. c. Specify a Web application to retract this solution from. In this case, choose the central administration URL, as shown in the figure above. d. Click OK. This may take a few seconds for the operation to complete. Uninstalling SharePoint by using the user interface 87

88 Uninstalling Microsoft SharePoint Support For emces1.archiving.wsp and emces1.restore.wsp: a. Click either solution, the Solution Properties page appears. Click Retract Solution the Retract Solution page appears. Figure 29 Retracting emces1.archiving.wsp or emces1.restore.wsp b. On the Retract Solution page, specify when to retract the solution either Now or At a specified time. c. Specify a web application to retract this solution from. In this case, choose the dedicated web application which only does Archiving/Restore URL, as shown in the figure above. d. Click OK. This may take a few seconds for the operation to complete. 88 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide

89 Uninstalling Microsoft SharePoint Support For emces1.archivesearch.wsp: a. Click either solution, the Solution Properties page appears. Click Retract Solution, the Retract Solution page appears. Figure 30 Retracting emces1.archiviesearch.wsp b. On the Retract Solution page, specify when to retract the solution either Now or At a specified time. c. Specify a web application to retract this solution from. In this case, choose All content Web applications, as shown in the figure above. d. Click OK. This may take a few seconds for the operation to complete. Uninstalling SharePoint by using the user interface 89

90 Uninstalling Microsoft SharePoint Support 4. The final step is to Delete the solutions. a. Go to Central Administration > System Settings > Manage farm solutions. The solutions list appears. Figure 31 Manage farm solutions b. Click a solution, the Solution Properties page appears c. Click Remove Solution, a warning dialog appears asking you if you are sure you want to remove the solution. Figure 32 Remove solution warning d. Click OK. The solution is removed from the system. 90 EMC SourceOne for Microsoft SharePoint Version 7.1 Installation Guide