Installation & Activation Guide. Lepide Exchange Recovery Manager

Transcription

1 Lepide Exchange Recovery Manager

2 Lepide Software Private Limited, All Rights Reserved This User Guide and documentation is copyright of Lepide Software Private Limited, with all rights reserved under the copyright laws. This user guide cannot be reproduced in any form without the prior written permission of Lepide Software Private Limited. No Patent Liability is assumed, however, with respect to the use of the information contained herein. Warranty Disclaimers and Liability Limitation Lepide Exchange Recovery Manager, and any and all accompanying software, files, data and materials, are distributed and provided AS IS and with no warranties of any kind, whether expressed or implied. In particular, there is no warranty for any harm, destruction, impairment caused to the system where Lepide Exchange Recovery Manager is installed. You acknowledge that good data processing procedure dictates that any program, including Lepide Exchange Recovery Manager, must be thoroughly tested with non-critical data before there is any reliance on it, and you hereby assume the entire risk of all use of the copies of Lepide Exchange Recovery Manager covered by this License. This disclaimer of warranty constitutes an essential part of this License. In addition, in no event does Lepide Software Private Limited authorize you or anyone else to use Lepide Exchange Recovery Manager in applications or systems where Lepide Exchange Recovery Manager failure to perform can reasonably be expected to result in a significant physical injury, or in loss of life. Any such use is entirely at your own risk, and you agree to hold Lepide Software Private Limited harmless from any and all claims or losses relating to such unauthorized use. Trademarks Lepide Exchange Recovery Manager is a copyright work of Lepide Software Private Limited. Windows 95, Windows 98, Windows ME, Windows NT, Windows XP, Windows Vista, Windows 7, Windows 8, Windows 2000 Server, Windows 2000 Advanced Server, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Office 365, Exchange 2000 Server, Exchange Server 2003, Exchange Server 2008, Exchange Server 2010, Exchange Server 2013, Microsoft Office, Microsoft Outlook, Microsoft Outlook 2000, Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010, Microsoft Outlook 2013, Microsoft Outlook 2016, PST, OST, OWA, Outlook Web Access, Microsoft Word, Exchange Management Tools, Exchange 2010 Management Tools, Exchange 2013 Management Pack,.NET, IIS, Windows PowerShell, Microsoft Management Console, and Windows Management Framework are registered trademarks of Microsoft Corporation. Intel and Pentium are the registered trademarks of Intel Corporation. All brand names, product names, logos, registered marks, service marks and trademarks appearing in

3 this document are the sole property of their respective owners. These are purely used for informational purposes only. We have compiled a list of such trademarks but it may be possible that few of them are not listed here. Contact Information sales@lepide.com Website:

4 Contents 1. Introduction Purpose of this Document Points of Contact System Requirements Minimum System Requirements Supported Platforms Installing Lepide Exchange Recovery Manager Uninstalling Lepide Exchange Recovery Manager : Uninstalling Lepide Exchange Recovery Manager from Windows Start Menu : Uninstalling Lepide Exchange Recovery Manager from Control Panel : Activating Software License... 26

5 1. Introduction Welcome to the Installation Guide of Lepide Exchange Recovery Manager In this installation guide, we have covered installation of Lepide Exchange Recovery Manager. Apart from the installation of software, the un-installation process of software is also included in this Installation Guide. 1.1 Purpose of this Document The purpose of this document is to guide you through the process of installation and un-installation of Lepide Exchange Recovery Manager. 1.2 Points of Contact For software related queries, you can contact us via or phone. Helpline: Send an General Queries: Sales: Technical Support: 2. System Requirements Before you start installing Lepide Exchange Recovery Manager, make sure that your computer meets the following requirements. 2.1 Minimum System Requirements Pentium Class Processors 2 GB RAM 100 MB free space for software installation Outlook should be installed on the system where LERM is installed 2.2 Supported Platforms One of the following Windows operating systems (32/64-bit version): Windows XP Professional

6 Windows Server 2000 Windows Server 2003 Windows Server 2008 Windows Server 2008 R2 Windows Vista Windows 7 Windows 8 Windows 8.1 Windows 10 Windows Server 2012 Windows Server 2012 R2 The Following Exchange Server supported with Outlook version (32/64-bit version): Microsoft Exchange Server 2000 and 2003 (Microsoft Outlook 2000 or higher) Microsoft Exchange Server 2007 (Microsoft Outlook 2003 or higher) Microsoft Exchange Server 2010 (Microsoft Outlook 2003 or higher) Microsoft Exchange Server 2013 (Microsoft Outlook 2007 or higher) Microsoft Exchange Server 2016 (Microsoft Outlook 2010 or higher) For working with Office 365: Outlook version 2007 SP2,2010 SP1, Outlook 2013, Outlook 2016.NET Framework 3.5 SP1 or later Windows PowerShell Required prerequisites to enable the functioning of Lepide Exchange Recovery Manager for different Exchange Servers are listed below: NOTE: Below mentioned requirements are relevant only if you are going to use Live Exchange environment. For all other usages (offline EDB, OST and PST) you only need to have any version of Outlook installed and configured on the system.

7 Exchange Server Software Required Prerequisites Exchange Server 2000 Exchange Server 2000 Management Tools Outlook 2000, 2002(XP) and 2003 Windows 2000 Administrative Tools Exchange Server 2003 Exchange Server 2003 Management Tools Exchange Server 2007 Exchange Server 2007 Management Tools Outlook 2002(XP), 2003 and 2007 Internet Information Server (IIS) Windows Server 2003 SP1 Administrative Tools Pack Outlook 2003, 2007, 2010 and 2013 IIS Microsoft.NET Framework 2.0 Microsoft Management Console (MMC 3.0) Exchange Server 2010 Exchange 2010 Management Tool Windows Power Shell 1.0 Outlook 2007, 2010, 2013 and 2016 IIS 6 Management Console.NET Framework 3.5 SP1 Exchange Server 2013 Exchange 2013 Management Tool Windows Management Framework Core (KB968930) - includes Power Shell 2.0 and WinRM 2.0 Outlook 2007, 2010, 2013 and 2016 IIS 6 Management Console or later Microsoft.NET Framework 3.5 SP1 or later Windows Management Framework 3.0 or later

8 Exchange Server 2016 Exchange 2016 Management Tool Outlook 2010, 2013 and 2016 IIS 6 Management Console or later Microsoft.NET Framework Windows Management Framework 4.0 or later Supported Virtual Environments: VMware Server 1.0x, 2.x VMware Workstation v6.0x for Windows Hyper-V Microsoft Virtual PC 2007 VMware ESX 4.0, ESXi

9 3. Installing Lepide Exchange Recovery Manager Before you start installing software, make you sure that software installer file is available on your computer. If the file is not available then you can download the file from - After you have downloaded the installer file, execute the following steps to install software: 1. Click on Run to start the installation process with the following wizard. Click Next to proceed further. 2. Select I accept the agreement option and click Next to continue.

10 3. Now select the destination location, where software will be installed. To change the destination location, click Browse button and select the preferred location. Click Next once you re done.

11 4. This wizard lets you customize the shortcut folder. Click Next once you re done.

12 5. Here you can select the required additional tasks such as to create icons on the desktop and Quick Launch bar. Click Next to proceed.

13 6. The wizard is now ready to start the installation process. Click Install button.

14 7. The installation process will be started.

15 8. When the installation process completes, the message Completing the Lepide Exchange Recovery Manager Setup Wizard appears on software installation window. Click the Finish button to launch software.

16 9. Click the Finish button to launch software. Welcome Screen of Lepide Exchange Recovery Manager Software appears.

17 Once software has been installed, you need to add Source and Destination to migrate the s and other contents from the Source to the Destination. Follow the below given steps to add Source: 10. Click Add Source option on the toolbar. Add Source window opens up. You can select any of these as Source: Offline EDB, Offline OST, Outlook PST, Live Exchange (single and multiple mailboxes), Live Exchange Public Folder, and OWA/Office 365.

18 11. Select your source as per requirement and click Next. The rest of the steps depend on the choice you make here. Complete the Add Source process by following the wizard. The following figure shows Office 365 added as Source.

19 Once the Source has been added, you can perform all the supported functions of Lepide Exchange Recovery Manager. However, before you can restore or migrate any data, you need to add the destination to software. To add destination: 12. Click Add Destination option on the tool bar. Add Destination wizard opens up. You can add any of these as destination: Existing PST, New PST, Live Exchange (Single and Multiple mailboxes), Live Exchange (Public Folder) and OWA/Office 365.

20 13. Select the destination from the list and click Next". The Rest of the steps depend on the choice that you make in this step. Complete the wizard by following the remaining steps. The following figure shows Office 365 added to the destination.

21 Once the Source and Destination have been added, you can perform all the supported functions with Lepide Exchange Recovery Manager.

22 4. Uninstalling Lepide Exchange Recovery Manager In case, you need to uninstall Lepide Exchange Recovery Manager, follow the instructions mentioned below. Before you start uninstalling Lepide Exchange Recovery Manager, make sure that software is not running on your system in the background. In addition, kindly kill its process LERM.exe from the Task Manager. Software can be uninstalled from your system in the following two ways: Uninstall through Windows Start Menu Uninstall through Control Panel 4.1: Uninstalling Lepide Exchange Recovery Manager from Windows Start Menu To remove the Lepide Exchange Recovery Manager Software from Start Menu follow the instructions below: 1. Click Start > All Programs > Lepide Exchange Manager > Uninstall Lepide Exchange Recovery Manager. A confirmation message appears to let you affirm the un-installation process. 2. Click the Yes button to uninstall software.

23 3. When software is removed, you ll receive the following message box. 4. Click the OK button to finish the un-installation process.

24 4.2: Uninstalling Lepide Exchange Recovery Manager from Control Panel To remove the Lepide Exchange Recovery Manager Software from Control Panel, follow the steps below: 1. Click Start -> Control Panel. The Control Panel window appears. 2. Double click the Add or Remove Programs icon. A list of the programs installed on your computer appears. 3. Select Lepide Exchange Recovery Manager and click the Uninstall button. A confirmation message before un-installing software appears on the screen. 4. Click the Yes button to uninstall software.

25 5. The following message box will confirm the successful un-installation of software. 6. Click the OK button to complete the un-installation process. To remove the remaining elements delete its program installation folder manually and then empty the Recycle Bin as well. %ProgramFiles%\Lepide Exchange Recovery Manager for 32-bit OS %ProgramFiles(x86)%\Lepide Exchange Recovery Manager for 64-bit OS After following the above steps, Lepide Exchange Recovery Manager will be uninstalled successfully from your computer system.

26 5: Activating Software License Lepide Exchange Recovery Manager is also available in trial version. It works just like the full version but there are some limitations on further functionalities. The trial version transfers only 2 messages per folder/per session, you cannot save the search results, also, extract data cannot be saved. LERM is available in Standard and Professional editions. Standard edition comes with certain limitations while Professional edition has no feature limitations. To purchase license, you can contact our sales team at: sales@lepide.com. After installing the trial version of software, if you want to generate license code for full version, follow these steps: 1. Right-click on any of the added source items (EDB, OST, PST, Live Exchange, and Office 365). If a source is not already added, add a source and right-click on it. In the popup menu select Generate License Code.

27 2. Generate License code dialog box opens up. All the items present in the Source list will be displayed in the dialog box. Select all the items for which you want to generate the license code. In the below given screenshot we have selected an EDB file and an Exchange Server. To generate license code for OSTs select License for OST checkbox.

28 3. Click OK. 4. The following message appears. LERM License file named as (Lepide Exchange Recovery Manager.out) is saved on the desktop. Click on the OK button to close the window. 5. the License.out file to Lepide Software sales team at: After making the purchase Lepide Software will send you a license activation file. Save that file on the local disk. 6. To activate the license, launch Lepide Exchange Recovery Manager. 7. Click on Help-> Activate Software menu option.

29 8. Browse the license activation file from where it is located.

30 9. All the fields in Activate software window get populated as per license purchased. OST license information is displayed in the bottom field. Order number field is also populated. Click on Activate. 10. License Applied Successfully message box is displayed. Click on OK to close the window.

31 Thus, you can successfully activate the license for Lepide Exchange Recovery Manager.