Microsoft Actualanswers Exam Questions & Answers

Transcription

1 Microsoft Actualanswers Exam Questions & Answers Number: Passing Score: 800 Time Limit: 120 min File Version: Microsoft Exam Questions & Answers Exam Name: Configuring Advanced Windows Server 2012 Services

2 Realtests QUESTION 1 You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on a subnet named Subnet1. Server1 has scope named Scope1. Scope1 contains IP addresses for the /24 network. Your company is migrating the IP addresses on Subnet1 to use a network ID of /16. On Server1, you create a scope named Scope2. Scope2 contains IP addresses for the /16 network. You need to ensure that clients on Subnet1 can receive IP addresses from either scope. What should you create on Server1? A. A multicast scope B. A scope C. A superscope D. A split-scope Correct Answer: C /Reference: : QUESTION 2 Your network contains an Active Directory domain named adatum.com. The domain contains a domain controller named DC1 that runs Windows Server On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.) You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to a standard primary zone. What should you do before you change the zone type? A. Unsign the zone. B. Modify the Zone Signing Key (ZSK).

3 C. Modify the Key Signing Key (KSK). D. Change the Key Master. Correct Answer: A /Reference: : QUESTION 3 Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server Server1 has the IP Address Management (IPAM) Server feature installed. Server2 has the DHCP Server server role installed. A user named User1 is a member of the IPAM Users group on Server1. You need to ensure that User1 can use IPAM to modify the DHCP scopes on Server2. The solution must minimize the number of permissions assigned to User1. To which group should you add User1? A. DHCP Administrators on Server2 B. IPAM ASM Administrators on Server1 C. IPAMUG in Active Directory D. IPAM MSM Administrators on Server1 Correct Answer: A /Reference: : QUESTION 4 You have a server named DC2 that runs Windows Server DC2 contains a DNS zone named adatum.com. The adatum.com zone is shown in the exhibit. (Click the Exhibit button.)

4 You need to configure DNS clients to perform DNSSEC validation for the adatum.com DNS domain. What should you configure? A. The Network Location settings B. A Name Resolution Policy C. The DNS Client settings D. The Network Connection settings Correct Answer: B /Reference: : QUESTION 5 Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domain controllers in both of the forests run Windows Server The adatum.com domain contains a file server named Servers. Adatum.com has a one-way forest trust to contoso.com. A contoso.com user name User10 attempts to access a shared folder on Servers and receives the error message shown in the exhibit. (Click the Exhibit button.)

5 You verify that the Authenticated Users group has Read permissions to the Data folder. You need to ensure that User10 can read the contents of the Data folder on Server5 in the adatum.com domain. What should you do? A. Grant the Other Organization group Read permissions to the Data folder. B. Modify the list of logon workstations of the contoso\user10 user account. C. Enable the Netlogon Service (NP-In) firewall rule on Server5. D. Modify the permissions on the Server5 computer object in Active Directory. Correct Answer: D /Reference: : To resolve the issue, I had to open up AD Users and Computers --> enable Advanced Features -- > Select the Computer Object --> Properties --> Security --> Add the Group I want to allow access to the computer (in this case, DomainA\Domain users) and allow "Allowed to Authenticate". Once I did that, everything worked: QUESTION 6 Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server The domain contains two domain controllers. The domain controllers are configured as shown in the following table.

6 DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which tool should you use? A. Active Directory Sites and Services B. Ntdsutil C. DNS Manager D. Active Directory Domains and Trusts Correct Answer: C /Reference: : QUESTION 7 Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The functional level of the forest is Windows Server The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The functional level of the domain is Windows Server The fabrikam.com domain contains domain controllers that run either Windows Server 2003 or Windows Server The functional level of the domain is Windows Server The contoso.com domain contains a member server named Server1 that runs Windows Server You install the Active Directory Domain Services server role on Server1. You need to add Server1 as a new domain controller in the contoso.com domain. What should you do? A. Run the Active Directory Domain Services Configuration Wizard. B. Run adprep.exe /domainprep, and then run dcpromo.exe. C. Raise the functional level of the forest, and then run dcprorno.exe. D. Modify the Computer Name/Domain Changes properties. Correct Answer: A

7 /Reference: : Windows Server 2012 requires a Windows Server 2003 forest functional level. That is, before you can add a domain controller that runs Windows Server 2012 to an existing Active Directory forest, the forest functional level must be Windows Server 2003 or higher. QUESTION 8 Your network contains an Active Directory domain named adatum.com. The domain contains two domain controllers that run Windows Server The domain controllers are configured as shown in the following table. You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you create a new user account named User1. You need to prepopulate the password for User1 on DC2. What should you do first? What should you do first? A. Connect to DC2 from Active Directory Users and Computers. B. Add DC2 to the Allowed RODC Password Replication Policy group. C. Add the User1 account to the Allowed RODC Password Replication Policy group. D. Run Active Directory Users and Computers as a member of the Enterprise Admins group. Correct Answer: C /Reference: : QUESTION 9 You have a server named Server1 that has the Active Directory Certificate Services server role installed. Server1 uses a hardware security module (HSM) to protect the private key of Server1. You need to ensure that the Active Directory Certificate Services (AD CS) database, log files, and private key are backed up. You perform regular backups of the HSM module by using a backup utility provided by the HSM manufacturer. What else should you do? A. Run the certutil.exe command and specify the -backupkey parameter. B. Run the certutil.exe command and specify the -backupdb parameter. C. Run the certutil.exe command and specify the -backup parameter. D. Run the certutil.exe command and specify the -dump parameter.

8 Correct Answer: B /Reference: : QUESTION 10 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card. A user named User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain. Which tool should you use? A. Active Directory Sites and Services B. Active Directory Administrative Center C. Server Manager D. Certificate Templates Correct Answer: B /Reference: : QUESTION 11 Your network contains a server named Server1 that runs Windows Server Server1 has the Hyper-V server role installed. Server1 hosts 10 virtual machines that run Windows Server You add a new server named Server2. Server2 has faster hard disk drives, more RAM, and a different processor manufacturer than Server1. You need to move all of the virtual machines from Server1 to Server2. The solution must minimize downtime. What should you do for each virtual machine? A. Perform a quick migration. B. Perform a storage migration. C. Export the virtual machines from Server1 and import the virtual machines to Server2. D. Perform a live migration. Correct Answer: C /Reference:

9 : The different processor manufacturer is the key here. Storage, Live, and Quick all require same manufacturer. QUESTION 12 Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail. What should you configure? A. Affinity-None B. Affinity-Single C. The cluster quorum settings D. The failover settings E. A file server for general use F. The Handling priority G. The host priority H. Live migration I. The possible owner J. The preferred owner K. Quick migration L. the Scale-Out File Server Correct Answer: C /Reference: : QUESTION 13 Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes to Cluster1. You have a folder named Folder1 on Server1 that contains application data. You plan to provide continuously available access to Folder1. You need to ensure that all of the nodes in Cluster1 can actively respond to the client requests for Folder1. What should you configure? A. Affinity-None B. Affinity-Single C. The cluster quorum settings

10 D. The failover settings E. A file server for general use F. The Handling priority G. The host priority H. Live migration I. The possible owner J. The preferred owner K. Quick migration L. the Scale-Out File Server Correct Answer: L /Reference: : Scale-Out File Server for application data (Scale-Out File Server) This clustered file server is introduced in Windows Server 2012 and lets you store server application data, such as Hyper-V virtual machine files, on file shares, and obtain a similar level of reliability, availability, manageability, and high performance that you would expect from a storage area network. All file shares are online on all nodes simultaneously. File shares associated with this type of clustered file server are called scale-out file shares. This is sometimes referred to as active-active. QUESTION 14 Information and details provided in a question apply only to that question. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Cluster1 hosts a secure web application named WebApp1. WebApp1 saves user state information locally on each node. You need to ensure that when users connect to WebApp1, their session state is maintained. What should you configure? A. Affinity-None B. Affinity-Single C. The cluster quorum settings D. The failover settings E. A file server for general use F. The Handling priority G. The host priority H. Live migration I. The possible owner J. The preferred owner K. Quick migration L. the Scale-Out File Server

11 Correct Answer: B /Reference: : QUESTION 15 You manage an environment that has many servers. The servers run Windows Server 2012 and use iscsi storage. Administrators report that it is difficult to locate available iscsi resources on the network. You need to ensure that the administrators can locate iscsi resources on the network by using a central repository. Which feature should you deploy? A. The iscsi Target Server role service B. The isns Server service feature C. The Windows Standards-Based Storage Management feature D. The iscsi Target Storage Provider feature Correct Answer: B /Reference: : QUESTION 16 Your network contains an Active Directory domain named contoso.com. The network contains a file server named Server1 that runs Windows Server You create a folder named Folder1. You share Folder1 as Share1. The NTFS permissions on Folder1 are shown in the Folder1 exhibit. (Click the Exhibit button.)

12 The Everyone group has the Full control Share permission to Folder1. You configure a central access policy as shown in the Central Access Policy exhibit. (Click the Exhibit button.)

13 Members of the IT group report that they cannot modify the files in Folder1. You need to ensure that the IT group members can modify the files in Folder1. The solution must use central access policies to control the permissions. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. On the Classification tab of Folder1, set the classification to Information Technology. B. On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT group. C. On Share1, assign the Change Share permission to the IT group.

14 D. On the Security tab of Folder1, remove the permission entry for the IT group. E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group. Correct Answer: AB /Reference: : QUESTION 17 You have a file server named Server1 that runs a Server Core Installation of Windows Server You need to ensure that users can access previous versions of files that are shared on Server1 by using the Previous Versions tab. Which tool should you use? A. Diskpart B. Wbadmin C. Vssadmin D. Storrept Correct Answer: C /Reference: : QUESTION 18 Your network contains two servers named Server1 and Server2 that run Windows Server Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.

15 What should you do? A. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1. B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1. C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1. D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for VM1. Correct Answer: D /Reference: : You first have to enable replication on the Replica server--server1--by going to the server and modifying the "Replication Configuration" settings under Hyper-V settings. You then go to VM1-- which presides on Server2-- and run the "Enable Replication" wizard on VM1.

16

17 QUESTION 19 Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)

18 You need to change the replication scope of the contoso.com zone. What should you do before you change the replication scope? A. Modify the Zone Transfers settings. B. Add DC1 to the Name Servers list. C. Add your user account to the Security settings of the zone. D. Unsign the zone. Correct Answer: D /Reference: : QUESTION 20 Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server Server1 has the IP Address Management (IPAM) Server feature installed. You install the IPAM client on Server2. You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.)

19 You need to manage IPAM from Server2. What should you do first? A. On Server1, add the Server2 computer account to the IPAM MSM Administrators group. B. On Server2, open Computer Management and connect to Server1. C. On Server2, add Server1 to Server Manager. D. On Server1, add the Server2 computer account to the IPAM ASM Administrators group. Correct Answer: C /Reference: :

20 QUESTION 21 Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Dc1. DC1 has the DNS Server server role installed. The network has two sites named Site1 and Site2. Site1 uses /16 IP addresses and Site2 uses /16 IP addresses. All computers use DC1 as their DNS server. The domain contains four servers named Server1, Server2, Server3, and Server4. All of the servers run a service named Service1. DNS host records are configured as shown in the exhibit. (Click the Exhibit button.)

21 You discover that computers from the /24 network always resolve Service1 to the IP address of Server1. You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2 when the computers attempt to resolve Service1. What should run on DC1? A. dnscmd /config /bindsecondaries 1 B. dnscmd /config /localnetpriority 0 C. dnscmd /config /localnetprioritynetmask 0x0000ffff D. dnscmd /config /roundrobin 0 Correct Answer: C /Reference: : QUESTION 22 Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. The domain contains two servers named Server1 and Server2 that run Windows Server Both servers have the DHCP Server server role installed. Server1 is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addresses to the client computers in the main office site. Server2 provides IPv4

22 addresses to the client computers in the branch office site. You need to ensure that if either Server1 or Server2 are offline, the client computers can still obtain IPv4 addresses. The solution must meet the following requirements: - The storage location of the DHCP databases must not be a single point of failure. - Server1 must provide IPv4 addresses to the client computers in the branch office site only if Server2 is offline. - Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline. Which configuration should you use? A. load sharing mode failover partners B. a failover cluster C. hot standby mode failover partners D. a Network Load Balancing (NLB) cluster Correct Answer: C /Reference: : QUESTION 23 You have a file server named FS1 that runs Windows Server 8. Data Deduplication is enabled on FS1. You need to configure Data Deduplication to run at a normal priority from 20:00 to 06:00 daily. What should you configure? A. File and Storage Services in Server Manager B. The Data Deduplication process in Task Manager C. Disk Management in Computer Management D. The properties of drive C Correct Answer: A /Reference: : QUESTION 24 Your network contains an Active Directory domain named contoso.com. A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof of concept was complete, the Active Directory Rights Management Services server role was removed. You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service

23 Connection Point (SCP) was found. You need to remove the existing AD RMS SCP. A. Certification Authority B. Authorization Manager C. ADSI Edit D. Active Directory Domains and Trusts Correct Answer: C /Reference: : en-us.aspx QUESTION 25 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA). You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes: - security - Client authentication - Encrypting File System (EFS) Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. From a Group Policy, configure the Certificate Services Client Auto-Enrollment settings. B. From a Group Policy, configure the Certificate Services Client Certificate Enrollment Policy settings. C. Modify the properties of the User certificate template, and then publish the template. D. Duplicate the User certificate template, and then publish the template. E. From a Group Policy, configure the Automatic Certificate Request Settings settings. Correct Answer: AD /Reference: : The default user template supports all of the requirements EXCEPT auto enroll as shown below:

24 However a duplicated template from users has the ability to autoenroll: The Automatic Certificate Request Settings GPO setting is only available to Computer, not user. QUESTION 26 Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. The domain contains four servers. The servers are configured as shown in the following table. You need to update the schema to support a domain controller that will run Windows Server On which server should you run adprep.exe?

25 A. Server1 B. DC3 C. DC2 D. DC1 Correct Answer: B /Reference: : QUESTION 27 Your network contains two servers named Server1 and Server2 that run Windows Server Both servers have the Hyper-V server role installed. The servers have the hardware configurations shown in the following table. Server1 hosts five virtual machines that run Windows Server You need to move the virtual machines from Server1 to Server2. The solution must minimize downtime. What should you do for each virtual machine? A. Export the virtual machines from Server1 and import the virtual machines to Server2. B. Perform a live migration. C. Perform a quick migration. D. Perform a storage migration. Correct Answer: A /Reference: : QUESTION 28 Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the Hyper-V server role installed. You plan to replicate virtual machines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer (SSL). You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.

26 Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part of the solution. Choose two.) A. Client Authentication B. Kernel Mode Code Signing C. Server Authentication D. IP Security end system E. KDC Authentication Correct Answer: AC /Reference: : requirements.aspx QUESTION 29 Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server Both servers have the Hyper-V server role installed. The network contains an enterprise certification authority (CA). All servers are enrolled automatically for a certificate-based on the Computer certificate template. On Server1, you have a virtual machine named VM1. VM1 is replicated to Server2. You need to encrypt the replication of VM1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. On Server1, modify the settings of VM1. B. On Server2, modify the settings of VM1. C. On Server2, modify the Hyper-V Settings. D. On Server1, modify the Hyper-V Settings. E. On Server1, modify the settings of the virtual switch to which VM1 is connected. F. On Server2, modify the settings of the virtual switch to which VM1 is connected. Correct Answer: AC

27 /Reference: : Once you change the Hyper-V Settings of Server 2 to encrypt replications with a certificate, you then need to change the replication information of VM1 to use the secure connection. QUESTION 30 Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes in Cluster1. You have a folder named Folder1 on Server1 that hosts application data. Folder1 is a folder target in a Distributed File System (DFS) namespace. You need to provide highly available access to Folder1. The solution must support DFS Replication to Folder1. What should you configure? A. Affinity-None B. Affinity-Single C. The cluster quorum settings D. The failover settings E. A file server for general use F. The Handling priority G. The host priority H. Live migration I. The possible owner J. The preferred owner K. Quick migration L. The Scale-Out File Server Correct Answer: E /Reference: :

28 QUESTION 31 Your network contains an Active Directory domain named contoso.com. A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof of concept was complete, the Active Directory Rights Management Services server role was removed. You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMS SCP. Which tool should you use? A. ADSI Edit B. Active Directory Users and Computers C. Active Directory Domains and Trusts D. Active Directory Sites and Services E. Services F. Authorization Manager G. TPM Management H. Certification Authority Correct Answer: AD /Reference: : QUESTION 32 Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server The domain contains two domain controllers.

29 DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which tool should you use? A. Dnscmd B. Dnslint C. Repadmin D. Ntdsutil E. DNS Manager F. Active Directory Sites and Services G. Active Directory Domains and Trusts H. Active Directory Users and Computers Correct Answer: E /Reference: : QUESTION 33 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card. A user named User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain. Which tool should you use? A. Active Directory Administrative Center B. Active Directory Sites and Services C. Active Directory Users and Computers D. the Certification Authority console E. the Certificates snap-in F. Certificate Templates G. Server Manager H. the Security Configuration Wizard Correct Answer: AC

30 /Reference: : QUESTION 34 Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2, or Windows Server You have a Password Settings object (PSOs) named PSO1. You need to view the settings of PSO1. Which tool should you use? A. Get-ADDomainControllerPasswordReplicationPolicy B. Get-ADDefaultDomainPasswordPolicy C. Server Manager D. Get-ADFineGrainedPasswordPolicy Correct Answer: D /Reference: : QUESTION 35 Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 Both servers have the IP Address Management (IPAM) Server feature installed. You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2. To which group on Server2 should you add Tech1? A. IPAM MSM Administrators B. IPAM Administrators C. winrmremotewmiusers_ D. Remote Management Users Correct Answer: C /Reference: : This is another case of Remote Management Users and winrmremotewmiusers_ providing the exact same permissions. The description of each group is exactly the same. However since the user is already a member of IPAM administrators group and the IPAM MSM Administrators group provides access that is already available to the IPAM Administrators group. QUESTION 36 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server You are creating a central access rule named TestFinance that will be used to audit members of the Authenticated Users group for access failure to shared folders in the finance department. You need to ensure that access requests are unaffected when the rule is published. What should you do?

31 A. Add a User condition to the current permissions entry for the Authenticated Users principal. B. Set the Permissions to Use the following permissions as proposed permissions. C. Add a Resource condition to the current permissions entry for the Authenticated Users principal. D. Set the Permissions to Use following permissions as current permissions. Correct Answer: B /Reference: : QUESTION 37 You have a server named Server1 that runs Windows Server Windows Server 2012 is installed on volume C. You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts. Which tool should you use? A. The Restart-Server cmdlet B. The Bootcfg command C. The Restart-Computer cmdlet D. The Bcdedit command Correct Answer: D /Reference: : QUESTION 38 Your network contains two Active Directory forests named contoso.com and litwareinc.com. A two- way forest trusts exists between the forest. Selective authentication is enabled on the trust. The contoso.com forest contains a server named Server1. You need to ensure that users in litwareinc.com can access resources on Server1. What should you do? A. Install Active Directory Rights Management Services on a domain controller in contoso.com. B. Modify the permission on the Server1 computer account. C. Install Active Directory Rights Management Services on a domain controller in litwareinc.com. D. Configure SID filtering on the trust. Correct Answer: B /Reference: :

32 QUESTION 39 Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 and a domain controller named DC1. All servers run Windows Server A Group Policy object (GPO) named GPO1 is linked to the domain. Server1 contains a folder named Folder1. Folder1 is shared as Share1. You need to ensure that authenticated users can request assistance when they are denied access to the resources on Server1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Assign the Read Attributes NTFS permission on Folder1 to the Authenticated Users group. B. Install the File Server Resource Manager role service on Server1. C. Configure the Customize message for Access Denied errors policy setting of GPO1. D. Enable the Enable access-denied assistance on client for all file types policy setting for GPO1. E. Install the File Server Resource Manager role service on DC1. Correct Answer: BD /Reference: : C: The access-denied assistance message should be customized for your organization. The included message is only a sample. D: You can configure access-denied assistance within a domain by using Group Policy, or you can configure the assistance individually on each file server by using the File Server Resource Manager console. You can also change the access-denied message for a specific shared folder on a file server. Reference: Deploy Access-Denied Assistance QUESTION 40 Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2008 R2. The domain contains a file server named Server6 that runs Windows Server Server6 contains a folder named Folder1. Folder1 is shared as Share1. The NTFS permissions on Folder1 are shown in the exhibit. (Click the Exhibit button.)

33 The domain contains two global groups named Group1 and Group2. You need to ensure that only users who are members of both Group1 and Group2 are denied access to Folder1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Remove the Deny permission for Group1 from Folder1. B. Deny Group2 permission to Folder1. C. Install a domain controller that runs Windows Server D. Create a conditional expression. E. Deny Group2 permission to Share1. F. Deny Group1 permission to Share1. Correct Answer: CD

34 /Reference: : * Conditional Expressions for Permission Entries Windows Server 2008 R2 and Windows 7 enhanced Windows security descriptors by introducing a conditional access permission entry. Windows Server 2012 takes advantage of conditional access permission entries by inserting user claims, device claims, and resource properties, into conditional expressions. Windows Server 2012 security evaluates these expressions and allows or denies access based on results of the evaluation. Securing access to resources through claims is known as claims-based access control. Claims-based access control works with traditional access control to provide an additional layer of authorization that is flexible to the varying needs of the enterprise environment. QUESTION 41 You have a server named Server1 that runs Windows Server Server1 has a single volume that is encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker is configured to save encryption keys to a Trusted Platform Module (TPM). Server1 is configured to perform a daily system image backup. The motherboard on Server1 is upgraded. After the upgrade, Windows Server 2012 on Server1 fails to start. You need to start the operating system on Server1 as soon as possible. What should you do? A. Start Server1 from the installation media. Run startrec.exe. B. Move the disk to a server that has a model of the old motherboard. Start the server from the installation media. Run bcdboot.exe. C. Move the disk to a server that has a model of the old motherboard. Start the server. Run tpm.msc. D. Start Server1 from the installation media. Perform a system image recovery. Correct Answer: D /Reference: : QUESTION 42 Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table. An IP site link exits between each site. You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB. You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable. What should you do?

35 A. Create a site link bridge. B. Create additional connection objects for DC3 and DC4. C. Create additional connection objects for DC1 and DC2. D. Increase the cost of the site link between SiteA and SiteC. Correct Answer: D /Reference: : QUESTION 43 You have a server named Server1 that runs Windows Server Windows Server 2012 is installed on volume C. You need to ensure that Safe Mode with Networking loads the next time Server1 restarts. Which tool should you use? A. The Msconfig command B. The Restart-Server cmdlet C. The Restart-Computer cmdlet D. The Bootcfg command Correct Answer: A /Reference: : QUESTION 44 Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server DC1 has the DNS Server server role installed. The network contains client computers that run either Linux, Windows 7, or Windows 8. You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

36 You plan to configure Name Protection on all of the DHCP servers. You need to configure the adatum.com zone to support Name Protection. Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.) A. Sign the zone. B. Store the zone in Active Directory. C. Modify the Security settings of the zone. D. Configure Dynamic updates. Correct Answer: BD /Reference: : / Issue Name protection has been enabled on some IPv4 scopes, but secure DNS updates has not been enabled. / Impact Name protection requires secure update to work. Without name protection DNS names may be hijacked.

37 / Resolution Using the DNS MMC, configure an Active Directory-integrated DNS zone for the domain and enable secure (only) dynamic updates Note: * Name protection is based on the Dynamic Host Configuration Identifier (DHCID) in the Dynamic Host Configuration Protocol (DHCP) server. DHCID prevents the following name squatting situations: Server name squatting by a client Server name squatting by another server Client name squatting by another client Client name squatting by a server * Name squatting occurs when a non-windows-based computer registers in Domain Name System (DNS) with a name that is already registered to a Windows-based computer. The use of name protection in Windows Server prevents name squatting by non-windows-based computers. Name squatting does not present a problem on a homogeneous Windows network where Active Directory Domain Services (AD DS) can be used to reserve a name for a single user or computer. * (B) Convert primary DNS server to Active Directory integrated primary On the current DNS server, start DNS Manager. Right-click a DNS zone, click Properties, click the General tab, and then note the Type value. This will be Primary zone, Secondary zone or Stub zone. Click Change. In the Change Zone Type box, click to select the Store the zone in Active Directory (available only if DNS server is a domain controller) check box. When you are prompted to answer whether want this zone to become Active Directory integrated, click Yes, and then click OK. In the Domain properties, the type now shows "Active Directory-Integrated". * (C) Enable secure dynamic updates Open the DNS snap-in. In the console tree, right-click the applicable zone, and then click Properties. On the General tab, verify that the zone Type is Active Directory-Integrated. In Dynamic updates, click Secure only. Reference: DHCP: Secure DNS updates should be configured if Name Protection is enabled on any IPv4 scope QUESTION 45 You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server You need to force every node in Cluster1 to contact immediately the Windows Server Update Services (WSUS) server on your network for updates. Which tool should you use? A. The Add-CauClusterRole cmdlet B. The Wuauclt command C. The Wusa command D. The Invoke-CauScan cmdlet Correct Answer: D /Reference: : QUESTION 46 Your network contains an Active Directory domain named adatum.com. The domain contains a server named CA1 that runs Windows Server CA1 has the Active Directory Certificate Services server role installed and is configured to support key archival and recovery.

38 You need to ensure that a user named User1 can decrypt private keys archived in the Active Directory Certificate Services (AD CS) database. The solution must prevent User1 from retrieving the private keys from the AD CS database. What should you do? A. Assign User1 the Issue and Manage Certificates permission to Server1. B. Assign User1 the Read permission and the Write permission to all certificate templates. C. Provide User1 with access to a Key Recovery Agent certificate and a private key. D. Assign User1 the Manage CA permission to Server1. Correct Answer: C /Reference: : QUESTION 47 Your network contains two Active Directory forests named contoso.com and adatum.com. Contoso.com contains one domain. Adatum.com contains a child domain named child.adatum.com. Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust. Several user accounts are migrated from child.adatum.com to adatum.com. Users report that after the migration, they fail to access resources in contoso.com. The users successfully accessed the resources in contoso.com before the accounts were migrated. You need to ensure that the migrated users can access the resources in contoso.com. What should you do? A. Replace the existing forest trust with an external trust. B. Run netdom and specify the /quarantine attribute. C. Disable SID filtering on the existing forest trust. D. Disable selective authentication on the existing forest trust. Correct Answer: C /Reference: : QUESTION 48 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has the DHCP Server server role installed.

39 You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable. Which IPV6 scope prefix should you use? A. FF00:: B. 2001:: C. FD00:123:4567:: D. FE80:: Correct Answer: C /Reference: : Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges: * They are not allocated by an address registry and may be used in networks by anyone without outside involvement. * They are not guaranteed to be globally unique. * Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in the global DNS. As fd00::/8 ULAs are not meant to be routed outside their administrative domain (site or organization), administrators of interconnecting networks normally do not need to worry about the uniqueness of ULA prefixes. QUESTION 49 Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains three domain controllers. The domain controllers are configured as shown in the following table. You discover that when you run Group Policy Results from Group Policy Management, the settings from sitelinked Group Policy objects (GPOs) fail to appear in the results. You need to ensure that the settings from site-linked GPOs appear in the results. What should you do first? A. Run adprep on DC3 by using Windows Server 2012 installation media. B. Transfer the infrastructure master role to DC3. C. Upgrade DC2 to Windows Server D. Run adprep on DC1 by using Windows Server 2003 installation media. Correct Answer: A /Reference: : In this scenario a Windows 2012 server has been added to a Windows 2003 network.

40 Note: * Before adding your new Windows 2012 Domain Controller, or attempting to perform an in-place upgrade of an existing Windows 2008 or 2008 R2 DC, you must make sure that the Schema is upgraded to support your new Windows 2012 DC, and that you prepare each domain where you plan to install Windows 2012 DCs. To do this we can use the ADPREP.exe tool found in the support\adprep folder on your installation media. * Starting with Windows 2012 there is only one version of ADPREP available, and that is a 64-bit version. * Adprep is the utility--included in the OS installation media--that performs several crucial functions to upgrade AD to support that OS. The utility has three major options: /forestprep, /domainprep, and /rodcprep. The / forestprep option runs first, extending the AD schema with new object and attribute classes that the new AD version needs. The /domainprep option creates new well-known objects in AD, applies security changes, and miscellaneous other bits. Finally, /rodcprep makes forest-wide security changes to allow read-only domain controller (RODC) functionality. The Windows Server 2012 version of adprep.exe can run on any server that runs a 64-bit version of Windows Server 2008 or later. Reference: How to add a Windows Server 2012 domain controller to an existing Windows 2008 domain Topic 3, Volume C QUESTION 50 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has the DNS Server server role installed. Server1 is configured to use a DNS server from an Internet Service Provider (ISP) as a forwarder. Corporate management requires that client computers only resolve names of contoso.com computers. You need to configure Server1 to resolve names in the contoso.com zone only. What should you do on Server1? A. From DNS Manager, modify the root hints of Server1. B. From Windows PowerShell, run the Remove-DnsServerForwarder cmdlet. C. From Windows PowerShell, run the Set-NetDnsTransitionConfiguration cmdlet. D. From DNS Manager, modify the Advanced properties of Server1. Correct Answer: A /Reference: : If the DNS server does not know the address of the requested site, then it will forward the request to another DNS server. In order to do so, the DNS server must know of the IP address of another DNS server that it can forward the request to. This is the job of root hints. Root hints provides a list of IP addresses of DNS servers that are considered to be authoritative at the root level of the DNS hierarchy(also known as root name server). QUESTION 51 Your company has a main office and a remote office. The remote office is used for disaster recovery. The network contains an Active Directory domain named contoso.com. The domain contains member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server Server1 and Server2 are located in the main office. Server3 and Server4 are located in the remote office. All servers have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Storage is replicated between the main office and the remote site. You need to ensure that Cluster1 is available if two nodes in the same office fail.

41 What are two possible quorum configurations that achieve the goal? (Each correct answer presents a complete solution. Choose two.) A. Node Majority B. No Majority: Disk Only C. Node and File Share Majority D. Node and Disk Majority Correct Answer: AB /Reference: : Depending on the quorum configuration option that you choose and your specific settings, the cluster will be configured in one of the following quorum modes: * (A) Node majority (no witness) Only nodes have votes. No quorum witness is configured. The cluster quorum is the majority of voting nodes in the active cluster membership. * (B) No majority (disk witness only) No nodes have votes. Only a disk witness has a vote. The cluster quorum is determined by the state of the disk witness. The cluster has quorum if one node is available and communicating with a specific disk in the cluster storage. Generally, this mode is not recommended, and it should not be selected because it creates a single point of failure for the cluster. * Node majority with witness (disk or file share) Nodes have votes. In addition, a quorum witness has a vote. The cluster quorum is the majority of voting nodes in the active cluster membership plus a witness vote. A quorum witness can be a designated disk witness or a designated file share witness. Note: * Quorum in Windows 2008 R2 referred to a consensus, that is, a majority of votes is required in order to reach quorum and maintain stability of the cluster. A new option created in Windows Server 2012 which was also back ported to Windows Server 2008 R2 SP1 was the ability to stop a node being able to participate in the voting process. * Dynamic quorum is the ability of the cluster to recalculate quorum on the fly and still maintain a working cluster. This is a huge improvement as we are now able to continue to run a cluster even if the number of nodes remaining in the cluster is less than 50%. This was not possible before but the dynamic quorum concept now allows us to do this. In fact we can reduce the cluster down to the last node (known as last man standing) and still maintain quorum. Reference: Configure and Manage the Quorum in a Windows Server 2012 Failover Cluster QUESTION 52 Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server All servers have the Hyper-V server role and the Failover Clustering feature installed. The servers are configured as shown in the following table.

42 Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. From Hyper-V Manager on a node in Cluster2, create three virtual machines. B. From Hyper-V Manager on a node in Cluster2, modify the Hyper-V settings. C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication. D. From Cluster1, add and configure the Hyper-V Replica Broker role. E. From Cluster2, add and configure the Hyper-V Replica Broker role. Correct Answer: ACE /Reference: : A: Need to have same number of replicated VMs in the replicated site. C: Once the hosting server is configured for Replica, you can enable replication for each virtual machine that you want to be replicated. E: The Hyper-V Replica Broker is placed in the replicated cluster Note: * Each node of the failover cluster that is involved in Replica must have the Hyper-V server role installed. * Windows Server 2012 Hyper-V Replica is a built-in mechanism for replicating Virtual Machines (VMs). It can replicate selected VMs in real-time or asynchronously from a primary site to a designated replica site across LAN/WAN. Here a replica site hosts a replicated VM while an associated primary site is where the source VM runs. And either a replica site or a primary site can be a Windows Server 2012 Hyper-V host or a Windows Server 2012 Failover Cluster. QUESTION 53 Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. The File Server Resource Manager role service is installed on Server1. All servers run Windows Server A Group Policy object (GPO) named GPO1 is linked to the organizational unit (OU) that contains Server1. The following graphic shows the configured settings in GPO1.

43 Server1 contains a folder named Folder1. Folder1 is shared as Share1. You attempt to configure access-denied assistance on Server1, but the Enable access-denied assistance option cannot be selected from File Server Resource Manager. You need to ensure that you can configure access-denied assistance on Server1 manually by using File Server Resource Manager. Which two actions should you perform? A. Set the Enable access-denied assistance on client for all file types policy setting to Disabled for GPO1. B. Set the Customize message for Access Denied errors policy setting to Not Configured for GPO1. C. Set the Enable access-denied assistance on client for all file types policy setting to Enabled for GPO1. D. Set the Customize message for Access Denied errors policy setting to Enabled for GPO1. Correct Answer: B /Reference: : QUESTION 54 Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and childl.contoso.com. The domains contain three domain controllers. The domain controllers are configured as shown in the following table. You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring setting is enforced in the child1.contoso.com domain.

44 Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Upgrade DC1 to Windows Server B. Upgrade DC11 to Windows Server C. Raise the domain functional level ofchildl.contoso.com, D. Raise the domain functional level of contoso.com. E. Raise the forest functional level of contoso.com. Correct Answer: BD /Reference: : QUESTION 55 Your network contains two servers named Server1 and Server2 that run Windows Server Server1 and Server2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas of each other. Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1. You need to verify whether the replica of VM5 on Server1 is functional. The solution must ensure that VM5 remains accessible to clients. What should you do from Hyper-V Manager? A. On Server1, execute a Planned Failover. B. On Server1, execute a Test Failover. C. On Server2, execute a Planned Failover. D. On Server2, execute a Test Failover. Correct Answer: B /Reference: : QUESTION 56 Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server All client computers run Windows 8. You need to configure a custom Access Denied message that will be displayed to users when they are denied access to folders or files on Server1. What should you configure? A. A classification property B. The File Server Resource Manager Options C. A file management task D. A file screen template Correct Answer: B

45 /Reference: : QUESTION 57 You have a file server named Server1 that runs a Server Core Installation of Windows Server Server1 has a volume named D that contains user data. Server1 has a volume named E that is empty. Server1 is configured to create a shadow copy of volume D every hour. You need to configure the shadow copies of volume D to be stored on volume E. What should you run? A. The Set-Volume cmdlet with the -driveletter parameter B. The Set-Volume cmdlet with the -path parameter C. The vssadmin.exe add shadowstorage command D. The vssadmin.exe create shadow command Correct Answer: C /Reference: : QUESTION 58 Your network contains an Active Directory forest named contoso.com. All servers run Windows Server The domain contains four servers. The servers are configured as shown in the following table. You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. On which server should you install IPAM? A. DC1 B. DC2 C. DC3 D. Server1 Correct Answer: D

46 /Reference: : QUESTION 59 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has the DHCP Server server role installed. You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable. Which IPV6 scope prefix should you use? A. FF00:: B. FE80:123:4567:: C. FD00:123:4567:: D. FF00:123:4567:890A:: Correct Answer: C /Reference: : QUESTION 60 You have 20 servers that run Windows Server You need to create a Windows PowerShell script that registers each server in Windows Azure Online Backup and sets an encryption passphrase. Which two PowerShell cmdlets should you run in the script? (Each correct answer presents part of the solution. Choose two.) A. New-OBPolicy B. New-OBRetentionPolicy C. Add-OBFileSpec D. Start-OBRegistration E. Set OBMachineSetting Correct Answer: DE /Reference: : D: Start-OBRegistration Registers the current computer with Windows Azure Online Backup using the credentials (username and password) created during enrollment. E: The Set-OBMachineSetting cmdlet sets a OBMachineSetting object for the server that includes proxy server settings for accessing the internet, network bandwidth throttling settings, and the encryption passphrase that is required to decrypt the files during recovery to another server. Incorrect: Not C: The Add-OBFileSpec cmdlet adds the OBFileSpec object, which specifies the items to include or exclude from a backup, to the backup policy (OBPolicy object). The OBFileSpec object can include or exclude multiple files, folders, or volumes. T QUESTION 61 You have 30 servers that run Windows Server 2012.

47 All of the servers are backed up daily by using Windows Azure Online Backup. You need to perform an immediate backup of all the servers to Windows Azure Online Backup. Which Windows PowerShell cmdlets should you run on each server? A. Get-OBPolicy StartOBBackup B. Start-OBRegistration StartOBBackup C. Get-WBPolicy Start-WBBackup D. Get-WBBackupTarget Start-WBBackup Correct Answer: A /Reference: : QUESTION 62 Your network contains an Active Directory domain named contoso.com. AH servers run Windows Server The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card. A user named User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain. Which tool should you use? A. The Security Configuration Wizard B. The Certificates snap-in C. Server Manager D. Active Directory Users and Computers Correct Answer: B /Reference: : You can use the Certificates snap-in to manage certificates for a user, computer, or service account. QUESTION 63 Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1 that runs a Server Core Installation of Windows Server File1 has a volume named D that contains home folders. File1 creates a shadow copy of volume D twice a day. You discover that volume D is almost full. You add a new volume named H to File1. You need to ensure that the shadow copies of volume D are stored on volume H.

48 Which command should you run? A. The Set-Volume cmdlet with the -driveletter parameter B. The vssadmin.exe create shadow command C. The Set-Volume cmdlet with the -path parameter D. The vssadmin.exe add shadowstorage command Correct Answer: A /Reference: : QUESTION 64 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has the DHCP Server server role installed. Server1 has a scope named Scope1. A policy named Policy1 is configured for Scope1. Policy1 is configured to provide Hyper-V virtual machines a one-day lease. All other computers receive an eight-day lease. You implement an additional DHCP server named Server2 that runs Windows Server On Server1, you configure Scope1 for DHCP failover. You discover that virtual machines that receive IP addresses from Server2 have a lease duration of eight days. You need to ensure that when Server2 assigns IP addresses to the Hyper-V virtual machines, the lease duration is one day. The solution must ensure that other computers that receive IP addresses from Server2 have a lease duration of eight days. What should you do? A. On Server2, create a new DHCP policy. B. on Server1, right-click Scope1, and then click Replicate Scope. C. On Server1, delete Policy1, and then recreate the policy. D. On Server2. right-click Scope1, and then click Reconcile. Correct Answer: B /Reference: :Scope 1 has been set up for DHCP failover. Now we need to replicate it from Server1 to Server2. QUESTION 65 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server You need to ensure that a WIM file that is located on a network share is used as the installation source when installing server roles and features on Server1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Run the dism.exe command and specify the /remove-package parameter.

49 B. Run the Remove-WindowsFeature cmdlet. C. Enable and configure the Specify settings for optional component installation and component repair policy setting by using a Group Policy object (GPO). D. Enable the Enforce upgrade component rules policy setting by using a Group Policy object (GPO). E. Run the Remove-WindowsPackage cmdlet. Correct Answer: AC /Reference: : A: To remove packages from an offline image by using DISM Example: At a command prompt, specify the package identity to remove it from the image. You can remove multiple packages on one command line. DISM /Image:C:\test\offline /Remove-Package /PackageName:Microsoft.Windows.Calc.Demo~6595b6144ccf1df~x86~en~ /PackageName:Microsoft- Windows-MediaPlayer-Package~31bf3856ad364e35~x86~~ C: * You can use Group Policy to specify a Windows image repair source to use within your network. The repair source can be used to restore Windows features or to repair a corrupted Windows image. * Set Group Policy You can use Group Policy to specify when to use Windows Update, or a network location as a repair source for features on demand and automatic corruption repair. To configure Group Policy for Feature on Demand Note: * The Windows Imaging Format (WIM) is a file-based disk image format. It was developed by Microsoft to help deploy Windows Vista and subsequent versions of Windows operating system family, as well as Windows Fundamentals for Legacy PCs. QUESTION 66 Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The functional level of the forest is Windows Server You have a domain outside the forest named litwareinc.com. You need to configure an access solution to meet the following requirements: - Users in litwareinc.com must be able to access resources on a server named Server1 in contoso.com. - Users in the contoso.com forest must be prevented from accessing any resources in litwareinc.com. - Users in litwareinc.com must be prevented from accessing any other resources in the contoso.com forest. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. Configure SID filtering on the trust. B. Configure forest-wide authentication on the trust. C. Create a one-way forest trust. D. Create a one-way external trust E. Modify the permission on the Server1 object. F. Configure selective authentication on the trust. Correct Answer: DEF /Reference:

50 : D (not C): litwareinc.com is outside the forest so we need an external trust (not a forest trust). E: Must grant the required permissions on Server1. F(not B): For external trust we must either select Domain-Wide or Selective Authentication (forst- wide authentication is not an option) BCE Note: * You can create an external trust to form a one-way or two-way, nontransitive trust with domains that are outside your forest. External trusts are sometimes necessary when users need access to resources in a Windows NT 4.0 domain or in a domain that is located in a separate forest that is not joined by a forest trust. / To select the scope of authentication for users that are authenticating through a forest trust, click the forest trust that you want to administer, and then click Properties. On the Authentication tab, click either Forest-wide authentication or Selective authentication. / To select the scope of authentication for users that are authenticating through an external trust, click the external trust that you want to administer, and then click Properties. On the Authentication tab, click either Domain-wide authentication or Selective authentication. * The forest-wide authentication setting permits unrestricted access by any users in the trusted forest to all available shared resources in any of the domains in the trusting forest. * Forest-wide authentication is generally recommended for users within the same organization. Reference: Select the Scope of Authentication for Users QUESTION 67 Your network contains a perimeter network and an internal network. The internal network contains an Active Directory Federation Services (AD FS) 2.1 infrastructure. The infrastructure uses Active Directory as the attribute store. You plan to deploy a federation server proxy to a server named Server2 in the perimeter network. You need to identify which value must be included in the certificate that is deployed to Server2. What should you identify? A. The FQDN of the AD FS server B. The name of the Federation Service C. The name of the Active Directory domain D. The public IP address of Server2 Correct Answer: B /Reference: : QUESTION 68 Your network contains an Active Directory forest named adatum.com. The forest contains an Active Directory Rights Management Services (AD RMS) cluster. A partner company has an Active Directory forest named litwareinc.com. The partner company does not have AD RMS deployed. You need to ensure that users in litwareinc.com can consume rights-protected content from adatum.com. Which type of trust policy should you create? A. At federated trust B. A trusted user domain C. A trusted publishing domain D. Windows Live ID

51 Correct Answer: A /Reference: : QUESTION 69 Your network contains an Active Directory forest named adatum.com. All servers run Windows Server The domain contains four servers. The servers are configured as shown in the following table. You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. On which server should you install IPAM? A. Server1 B. Server2 C. Server3 D. Server4 Correct Answer: D /Reference: : QUESTION 70 Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server The domain contains two domain controllers. The domain controllers are configured as shown in the following table. You configure a user named User1 as a delegated administrator of DC10.

52 You need to ensure that User1 can log on to DC10 if the network link between the Main site and the Branch site fails. What should you do? A. Add User1 to the Domain Admins group. B. Modify the properties of the DC10 computer account. C. Run repadmin and specify /replsingleobject parameter. D. On DC10, modify the User Rights Assignment in Local Policies. E. On DC10, run ntdsutil and configure the settings in the Local Roles context. Correct Answer: D /Reference: : Modify the following policy: Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally Note: * User Rights Assignment policies determines which users or groups have logon rights or privileges on the computer. * Delegated administrator accounts gain local administrative permissions to the RODC. These users can operate with privileges equivalent to the local computer's Administrators group. They are not members of the Domain Admins or the domain built-in Administrators groups. This option is useful for delegating branch office administration without giving out domain administrative permissions. Configuring delegation of administration is not required. QUESTION 71 Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains three domain controllers. The domain controllers are configured as shown in the following table. You plan to test an application on a server named Server1. Server1 is currently located in Site1. After the test, Server1 will be moved to Site2. You need to ensure that Server1 attempts to authenticate to DC3 first, while you test the application. What should you do? A. Create a new site and associate the site to an existing site link object. B. Modify the priority of site-specific service location (SRV) DNS records for Site2. C. Create a new subnet object and associate the subnet object to an existing site. D. Modify the weight of site-specific service location (SRV) DNS records Site1. E. Modify the registry on DC3. F. Modify the registry on Server1

53 Correct Answer: B /Reference: : Service Location (SRV) Resource Record Priority A number between 0 and that indicates the priority or level of preference given for this record to the host that is specified in Host offering this service. Priority indicates this host's priority with respect to the other hosts in this domain that offer the same service and are specified by different service location (SRV) resource records. Incorrect: Not D: Weight: A number between 1 and to be used as a load-balancing mechanism. When you select among more than one target SRV host for the type of service (specified in Service) that use the same Priority number, you can use this field to weight preference toward specific hosts. Where several hosts share equal priority, SRV-specified hosts with higher weight values that are entered here should be returned first to resolver clients in SRV query results. Reference: Service Location (SRV) Resource Record Dialog Box QUESTION 72 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card. A user named User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain. Which tool should you use? A. Active Directory Users and Computers B. Server Manager C. The Certificates snap-in D. The Certification Authority console Correct Answer: D /Reference: : You can use the Certification Authority console to configure CAs. This includes the following tasks: (D) Scheduling certificate revocation list publication. Installing the CA certificate when necessary. Configuring exit module settings. Configuring policy module settings. Modifying security permissions and delegate control of CAs. Enabling optional Netscape-compatible Webbased revocation checking. Reference: Configure Certification Authorities

54 QUESTION 73 Your network contains an Active Directory forest. The forest contains one domain named contoso.com. The domain contains three domain controllers. The domain controllers are configured as shown in the following table. DC1 has all of the operations master roles installed. You transfer all of the operations master roles to DC2, and then you uninstall Active Directory from DC1. You need to ensure that you can use Password Settings objects (PSOs) in the domain. What should you do? A. Change the domain functional level. B. Upgrade DC2. C. Run the dcgpofix.exe command. D. Transfer the schema master role. Correct Answer: A /Reference: : QUESTION 74 You have a server named Server1 that runs Windows Server When you install a custom application on Server1 and restart the server, you receive the following error message: "The Boot Configuration Data file is missing some required information. File: \Boot\BCD Error code: 0x " You start Server1 by using Windows PE. You need to ensure that you can start Windows Server 2012 on Server1. Which tool should you use? A. Bootsect B. Bootim C. Bootrec D. Bootcfg Correct Answer: C /Reference:

55 : QUESTION 75 Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server Server1 has the Active Directory Rights Management Services server role installed. Your company works with a partner organization that does not have its own Active Directory Rights Management Services (AD RMS) implementation. You need to create a trust policy for the partner organization. The solution must meet the following requirements: - Grant users in the partner organization access to protected content. - Provide users in the partner organization with the ability to create protected content. Which type of trust policy should you create? A. a federated trust B. Windows Live ID C. a trusted publishing domain D. a trusted user domain Correct Answer: A /Reference: : QUESTION 76 You perform a full installation of Windows Server 2012 on a virtual machine named Server1. You plan to use Server1 as a reference image. You need to minimize the amount of storage space used by the Windows Server 2012 installation. Which cmdlet should you use? A. Remove-Module B. Optimize-VHD C. Optimize-Volume D. Uninstall-WindowsFeature Correct Answer: B /Reference: : The Optimize-VHD cmdlet optimizes the allocation of space in or more virtual hard disk files, except for fixed virtual hard disks. The Compact operation is used to optimize the files. This operation reclaims unused blocks as well as rearranges the blocks to be more efficiently packed, which reduces the size of a virtual hard disk file. Reference: Optimize-VHD QUESTION 77 Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows

56 Server The domain contains two domain controllers. The domain controllers are configured as shown in the following table. You configure a user named User1 as a delegated administrator of DC10. You need to ensure that User1 can log on to DC10 if the network link between the Main site and the Branch site fails. What should you do? A. On DC10, run ntdsutil and configure the settings in the Roles context. B. On DC10, run ntdsutil and configure the settings in the Local Roles context. C. Modify the properties of the DCIO computer account. D. Run repadmin and specify /replsingleobject parameter. Correct Answer: B /Reference: : Modify the following policy: Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally Note: * User Rights Assignment policies determines which users or groups have logon rights or privileges on the computer. * Delegated administrator accounts gain local administrative permissions to the RODC. These users can operate with privileges equivalent to the local computer's Administrators group. They are not members of the Domain Admins or the domain built-in Administrators groups. This option is useful for delegating branch office administration without giving out domain administrative permissions. Configuring delegation of administration is not required. QUESTION 78 Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server The domain contains two domain controllers. The domain controllers are configured as shown in the following table. The Branch site contains a perimeter network. For security reasons, client computers in the perimeter network can communicate with client computers in the Branch site only.

57 You plan to deploy a new RODC to the perimeter network in the Branch site. You need to ensure that the new RODC will be able to replicate from DC10. What should you do first on DC10? A. Enable the Bridge all site links setting. B. Run the Active Directory Domain Services Configuration Wizard. C. Create an Active Directory site link bridge. D. Create an Active Directory site. Correct Answer: A /Reference: : QUESTION 79 Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server The domain contains two domain controllers. The domain controllers are configured as shown in the following table. The Branch site contains a perimeter network. For security reasons, client computers in the perimeter network can communicate with client computers in the Branch site only. You plan to deploy a new RODC to the perimeter network in the Branch site. You need to ensure that the new RODC will be able to replicate from DC10. What should you do first on DC10? A. Create an Active Directory subnet. B. Run the Active Directory Domain Services Configuration Wizard. C. Run dcpromo and specify the fcreatedcaccount parameter. D. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet. E. Create an Active Directory site. F. Run the Uninstall-ADDSDomainController cmdlet. Correct Answer: D /Reference: : Add-ADDSReadOnlyDomainControllerAccount Creates a read-only domain controller (RODC) account that can be used to install an RODC in Active Directory.

58 Note: * Notes Once you have added the RODC account, you can add an RODC to a server computer by using the Install- ADDSDomainController cmdlet with the -ReadOnlyReplica switch parameter. * Example Adds a new read-only domain controller (RODC) account to the corp.contoso.com domain using the North America site as the source site for the replication source domain controller. C:\PS>Add-ADDSReadOnlyDomainControllerAccount -DomainControllerAccountName RODC1 - DomainName corp.contoso.com -SiteName NorthAmerica Reference: Add-ADDSReadOnlyDomainControllerAccount QUESTION 80 Your network contains an Active Directory domain named contoso.com. The domain contains two Active Directory sites named Site1 and Site2. You discover that when the account of a user in Site1 is locked out, the user can still log on to the servers in Site2 for up to 15 minutes by using Remote Desktop Services (RDS). You need to reduce the amount of time it takes to synchronize account lockout information across the domain. Which attribute should you modify? To answer, select the appropriate attribute in the answer area. Hot Area:

59 Correct Answer:

60 /Reference: QUESTION 81 Your network contains an Active Directory domain named contoso.com. All file servers in the domain run Windows Server The computer accounts of the file servers are in an organizational unit (OU) named OU1. A Group Policy object (GPO) named GPO1 is linked to OU1. You plan to modify the NTFS permissions for many folders on the file servers by using central access policies. You need to identify any users who will be denied access to resources that they can currently access once the

61 new permissions are implemented. In which order should you Perform the five actions? Select and Place: Correct Answer:

62 /Reference: QUESTION 82 Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. All servers run Windows Server All domain user accounts have the Division attribute automatically populated as part of the user provisioning process. The Support for Dynamic Access Control and Kerberos armoring policy is enabled for the domain. You need to control access to the file shares on Server1 based on the values in the Division attribute and the Division resource property.

63 Which three actions should you perform in sequence? Select and Place: Correct Answer:

64 /Reference: QUESTION 83 Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8 Enterprise. You have a remote site that only contains client computers. All of the client computer accounts are located in an organizational unit (CU) named Remote1. A Group Policy object (GPO) named GPO1 is linked to the Remote1 CU. You need to configure BranchCache for the remote site.

65 Which two settings should you configure in GPO1? To answer, select the two appropriate settings in the answer area. Hot Area: Correct Answer:

66 /Reference: QUESTION 84 Your company has a main office and a branch office. An Active Directory site exists for each office. The network contains an Active Directory forest named contoso.com. The contoso.com domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server In the main office, you configure Server1 as a file server that uses BranchCache. In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.

67 You are creating a Group Policy for the branch office site. In the branch office, you need to configure the client computers that run Windows 8 to use Server2 and Server3 as BranchCache. Hot Area: Correct Answer:

68 /Reference: QUESTION 85 You have a server named Server2 that runs Windows Server You have storage provisioned on Server2 as shown in the exhibit. (Click the Exhibit button.)

69 You need to configure the storage so that it appears in Windows Explorer as a drive letter on Server1. Which three actions should you perform in sequence? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

70 Correct Answer:

71 /Reference: QUESTION 86 Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server You configure a new failover cluster named Cluster1. Server1 and Server2 are nodes in Cluster1. You need to configure the disk that will be used as a witness disk for Cluster1. How should you configure the witness disk?

72 To answer, drag the appropriate configurations to the correct location or locations. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place: Correct Answer:

73 /Reference: QUESTION 87 Your network contains an Active Directory forest named contoso.com that contains a single domain. The forest contains three sites named Site1, Site2, and Site3. Domain controllers run either Windows Server 2008 R2 or Windows Server Each site contains two domain controllers. Site1 and Site2 contain a global catalog server. You need to create a new site link between Site1 and Site2. The solution must ensure that the site link supports the replication of all the naming contexts.

74 From which node should you create the site link? To answer, select the appropriate node in the answer area. Hot Area: Correct Answer:

75 /Reference: QUESTION 88 Your network contains an Active Directory domain named adatum.com. All servers run Windows Server All domain controllers have the DNS Server server role installed. You have a domain controller named DC1. On DC1, you create an Active Directory-integrated zone named adatum.com and you sign the zone by using DNSSEC. You deploy a new read-only domain controller (RODC) named R0DC1.

76 You need to ensure that the contoso.com zone replicates to RODC1. What should you configure on DC1? To answer, select the appropriate tab in the answer area. Hot Area: Correct Answer:

77 /Reference: QUESTION 89 You have a file server named Server1 that runs Windows Server The folders on Server1 are configured as shown in the following table.

78 A new corporate policy states that backups must use Windows Azure Online Backup whenever possible. You need to identify which technology you must use to back up Server1. The solution must use Windows Azure Online Backup whenever possible. What should you identify? To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place:

79 Correct Answer:

80 /Reference: QUESTION 90 You have 3 server named Server1 that runs Windows Server You are asked to test Windows Azure Online Backup to back up Server1. You need to back up Server1 by using Windows Azure Online Backup. Which four actions should you perform in sequence? To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in

81 the correct order. Select and Place: Correct Answer:

82 /Reference: QUESTION 91 Your network contains an Active Directory domain named adatum.com. All servers run Windows Server All domain controllers have the DNS Server server role installed. You have a domain controller named DC1. On DC1, you create an Active Directory-integrated zone named adatum.com and you sign the zone by using DNSSEC. You deploy a new read-only domain controller (RODC) named RODC1.

83 You need to ensure that the contoso.com zone replicates to RODC1. What should you configure on DC1? To answer, select the appropriate tab in the answer area. Hot Area: Correct Answer:

84 /Reference: QUESTION 92 Your company has a primary data center and a disaster recovery data center. The network contains an Active Directory domain named contoso.com. The domain contains a server named that runs Windows Server Server1 is located in the primary data center. Server1 has an enterprise root certification authority (CA) for contoso.com. You deploy another server named Server2 to the disaster recovery data center.

85 You plan to configure Server2 as a secondary certificate revocation list (CRL) distribution point. You need to configure Server2 as a CRL distribution point (CDP). Which tab should you use to configure the required CDP entry? To answer, select the appropriate tab in the answer area. Hot Area: Correct Answer:

86 /Reference: QUESTION 93 Your network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named DHCP1 and DHCP2 that run Windows Server You install the IP Address Management (IPAM) Server feature on a member server named Server1 and you run the Run Invoke-IpamGpoProvisioning cmdlet. You need to manage the DHCP servers by using IPAM on Server1. Which three actions should you perform?

87 To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place: Correct Answer:

88 /Reference: QUESTION 94 Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. Server1 and Server2 are members of a cluster named Cluster1. Cluster1 hosts 10 virtual machines. When you try to migrate a running virtual machine from one server to another, you receive the following error message: "There was an error checking for virtual machine compatibility on the target node."

89 You need to ensure that the virtual machines can be migrated from one node to another. From which node should you perform the configuration? To answer, select the appropriate node in the answer area. Hot Area: Correct Answer:

90 /Reference: QUESTION 95 Your network contains an Active Directory domain named contoso.com. The domain contains domain controllers that run either Windows Server 2003, Windows Server 2008 R2, or Windows Server 2012.

91 You plan to implement a new Active Directory forest. The new forest will be used for testing and will be isolated from the production network. In the test network, you deploy a server named Server1 that runs Windows Server You need to configure Server1 as a new domain controller in a new forest named contoso.test. The solution must meet the following requirements: - The functional level of the forest and of the domain must be the same as that of contoso.com. - Server1 must provide name resolution services for contoso.test. What should you do? To answer, configure the appropriate options in the answer area.

92 Hot Area: Correct Answer:

93 /Reference: QUESTION 96 Your network contains two DHCP servers named Server1 and Server2. Server1 fails.

94 You discover that DHCP clients can no longer receive IP address leases. You need to ensure that the DHCP clients receive IP addresses immediately. What should you configure from the View/Edit Failover Relationship settings? To answer, select the appropriate setting in the answer area. Hot Area:

95 Correct Answer: /Reference: QUESTION 97

96 Your network contains two Active Directory forests named contoso.com and adatum.com. All domain controllers run Windows Server A federated trust exists between adatum.com and contoso.com. The trust provides adatum.com users with access to contoso.com resources. You need to configure Active Directory Federation Services (AD FS) claim rules for the federated trust. The solution must meet the following requirements: - In contoso.com, replace an incoming claim type named Group with an outgoing claim type named Role. - In adatum.com, allow users to receive their tokens for the relying party by using their Active Directory group membership as the claim type. The AD FS claim rules must use predefined templates. Which rule types should you configure on each side of the federated trust? To answer, drag the appropriate rule types to the correct location or locations. Each rule type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place:

97 Correct Answer:

98 /Reference: QUESTION 98 Your network contains four servers that run Windows Server 2012.

99 Each server has the Failover Clustering feature installed. Each server has three network adapters installed. An iscsi SAN is available on the network. You create a failover cluster named Cluster1. You add the servers to the cluster. You plan to configure the network settings of each server node as shown in the following table. You need to configure the network settings for Cluster1. What should you do? To answer, drag the appropriate network communication setting to the correct cluster network. Each network communication setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place:

100 Correct Answer:

101 /Reference: QUESTION 99 Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Servers, and Server4. All servers run Windows Server 2012.

102 Server1 and Server2 are located in a site named Site1. Server3 and Server4 are located in a site named Site2. The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 is configured to use the Node Majority quorum configuration. You need to ensure that Server1 is the only server in Site1 that can vote to maintain quorum. What should you run from Windows PowerShell? To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place:

103 Correct Answer:

104 /Reference: