Next Generation Element Management System for MetroNID, MetroNODE 10GE, and VeloCITY FS Solutions Product Benefits Point-and-click web browser based user interface Centralized fault management Northbound SNMP API for Network Management System (NMS) alarm integration Commissioning workflows for efficient node turn-up Job scheduling for automation Plug & Go inventory discovery Network-wide configuration backup and restore functions Network-wide firmware upgrades One-second, stream-based performance data collection Centralized service turn-up validation Commissioning templates Appliance-based deployment model for peace of mind Vision EMS As Carrier Ethernet continues to grow, network operators are increasing their footprint to reach new customers, open up new markets, and increase their revenue stream. Managing networks has become increasingly complex; reducing operational expenses and increasing productivity become key strategies in maximizing shareholder value. Accedian Networks Vision EMS Accedian Networks Vision EMS is a centralized management platform for Accedian Networks MetroNID, MetroNODE 10GE and VeloCITY FS performance-assurance solutions. From this application, multiple concurrent users can view and manage Accedian Networks devices, greatly simplifying the tasks of network operators. From initial installation through unit lifecycle administration and maintenance, Vision EMS TM simplifies, secures and accelerates Ethernet service validation, fault management, performance monitoring and network management. Management of Accedian Networks Devices Plug & Go NMS/EMS TM Integration 1. Device is received and powered on the network 2. Device receives periodic beacons from the beaconing NID and configures its management channel from the beacon information 3. Device identifies itself to the Inventory- Tracking NID 4. Vision EMS TM monitors the Tracking NID and adds the new device to its list 5. Vision EMS TM establishes communication 6. Vision EMS TM provisions the device Vision EMS TM combines proven open source platforms with a browser-based end user interface to provide a powerful management tool for your Accedian products. Built around a robust task-automation engine, Vision EMS TM can perform networkwide operations for device backups, device commissioning, firmware upgrades and even run multiple concurrent service validation tests. By extending Accedian Networks Plug & Go TM instant provisioning system, Vision EMS TM reduces operational effort to an absolute minimum. New units go from the box to being managed in just minutes. 1
Fault Management Vision EMS TM provides centralized fault management for a rapid view of your network health. An alarm banner is always visible, providing a quick tally of all active alarms, as well as any loss of connectivity to the underlying elements. Operators can drill down in the active alarms event list, which displays the most recent events in the system. This list provides alarm conditions, source entities and probable cause details. Feature Benefits Alarm Banner Real-time updates Provides bird s-eye view of alarms in the network Alarm Event List Alarm details pane Severity, description and probable cause information Alarm Query Supports queries per network element, time range, severities and probable cause Alarm Synchronization SNMP listener for real-time events Periodic resynchronization with network elements for alarm list accuracy Detects and raises alarms upon loss of contact Northbound Event Forwarding Up to four SNMP receivers Provides inform and notification support Sends out keep-alive messages to ensure connectivity Vision EMS provides real-time events by listening for activity from the underlying network. The alarm list is periodically refreshed on each device to maintain accurate alarm counts and to ensure operators are provided with an exact view of active alarms. Alarm Query Sorting and filtering active alarms is possible through an active alarms query tool. The multiple query options available can be combined to provide a view based on specific network elements, severity or time range. 2
Configuration Management Vision EMS TM automates network-wide unit backup archiving and export, leveraging its task-automation engine to process thousands of Accedian devices at the same time. Configuration files can be stored on either the Vision EMS TM server or on an external server, depending on your specific requirements. Product Benefits Inventory Collection Device Name Device model Serial number Firmware version Management IP address Ports and interfaces Backup and Restore Centralized archive of device node configuration information Support for concurrent backups Firmware Upgrade Centralized management of firmware upgrades Support for concurrent firmware distributions Configuring a Backup Job Quickly restore a unit s previous configuration or swap in a replacement unit in a few easy steps. Restoring a Node Firmware Upgrades Vision EMS TM supports large-scale firmware upgrades for individual units, as well as for groups of units that can be broken down into smaller target clusters for incremental execution. Multi-threaded batch processing and status tracking enable full-inventory upgrades to be completed and verified within time-sensitive maintenance windows. 3
Vision EMS - Next Generation Element Management System for MetroNID, MetroNODE 10GE, and VeloCITY FS Solutions Performance Data Streams Vision Collect Data is the great equalizer. Providing network operators and service providers with insightful data about the performance of their network is key to ensuring that SLAs are being met and that the required quality of service is being delivered to end customers. Performance Data Streams Vision EMSTM offers Vision Collect as an optional value-added module to obtain this data. Vision Collect is a performance data collection and distribution engine that provides near-real-time statistics, down to one-second granularity. In order to optimize network bandwidth while minimizing CPU and data-caching requirements, a permanent data stream is established between the devices and the Vision EMSTM platform. Vision Collect s permanent data stream distribution: Provides immediate access to available data Eliminates the overhead of legacy SNMP polling Streamlines the device s CPU and memory profiles Streamlines the Vision EMSTM server s CPU profile Vision Collect Status Customizable output formats are possible via the Apache Velocity Engine. This powerful template tool can be leveraged to meet the needs of network operators and service providers. Because Performance Matters Centralized configuration and collection of performance metrics for up to 1,000 devices at one-second granularity. Stream-based data exchange that optimizes network bandwidth and device resources Reception of one-second bins for PAATM Policies Regulators FlowMETERTM Reception of one-minute bins for all historical data Service OAM DMM, Packet Loss, Service Availability (SA), SA Metrics and Service Level Management Distribution of performance data to third-party systems through highlycustomizable CSV files 4 Vision Collect Agent Configuration
Service Turn-Up Validation Made Simple Y.1564 and RFC-2544 testing with Layer-2 and Layer-3 support One-way and two-way configurations VLAN, DSCP and PCP flow validation CIR and EIR throughput characterization Centralized configuration of up to eight flows per suite Configuration of multiple validation suites Generic suites can be used as templates for consistent validation across an entire network Site-to-site, or site-to-multisite configuration Concurrent flow execution for true service validation Automatic configuration of reverse flows for one-way tests Automatic creation and control of Layer-3 loopbacks Centralized validation of circuit configuration and performance Validation launch and status updates from the Vision EMS TM GUI Retrieval and archival of validation results that can be used as birth certificates Vision SP (Service Performance) RFC-2544 and Y.1564 Testing Vision EMS TM offers Vision SP as an optional value-added module. Vision SP is an ITU-T Y.1564 and RFC-2544 coordinator that enables centralized configuration and control of service validation tests. From one central screen, network operators can configure tests that include up to nine devices. Near-end and far-end inventory drop-down lists guide operators through the test configuration process by suggesting available Layer-2 and Layer-3 interfaces on the target endpoints. Vision EMS TM handles the testing configuration on all nine devices, creating loopbacks for two-way flows and offering the possibility to configure reverse tests for one-way flows. Once tests are configured, Vision EMS TM is used to launch them from a central location. Test progress can then be monitored and test results retrieved in real time as the test runs. Leveraging the Vision EMS TM task-automation engine, multiple tests can be executed in parallel by multiple operators, providing a truly centralized servicevalidation hub. 5
Device Turn-Up Made Simple Centralized template-based commissioning of MetroNID TE, MetroNID GT, MetroNODE 10GE TM, and VeloCITY FS TM devices. Intuitive GUI-based templates reduce operator s node turn-up times. Automated commissioning on device installation. Batch support for Mass Deployment of commissioning changes. No more logging into individual nodes for bulk edits. Data set support provides the means to tailor templates to specific node attributes while keeping wildcard values for common attributes. Daily scheduling for execution of routine tasks and deferred scheduling for the execution of unattended tasks. Progress tracking for job monitoring and job control to interrupt inprogress activities. Direct OPEX savings resulting from improved efficiencies in device turnup times and consistency. Vision Flow Device Commissioning Vision EMS TM offers Vision Flow as an optional value-added module. Vision Flow provides network operators with template-based commissioning tools to standardize and streamline the device turn-up process. Leveraging the Vision EMS TM flow engine, commissioning operations can be either launched automatically upon device installation or scheduled for a single device or multiple devices concurrently. Vision Flow Configuration Job Vision Flow Execution Vision Flow Job Scheduler Once configuration jobs are set up, Vision EMS TM is used to apply them to network elements from a central location. Leveraging the Vision EMS TM task-automation engine, multiple configurations can be applied to one or several network elements in parallel. 6
Vision EMS TM 2.4 Feature EtherNID GE VeloCITY FS MetroNID TE MetroNID GT MetroNODE 10GE Firmware Version All releases 5.4 and above 6.0 and above 5.4 and above Vision SP Common Features Vision Flow Vision Collect Configuration Backup 4.7 All releases 5.4 and above 6.0 and above 5.4 and above Configuration Restore & All releases 5.4 and above 6.0 and above 5.4 and above Job Scheduling 4.9 All releases 5.4 and above 6.0 and above 5.4 and above Firmware Upgrade All releases 5.4 and above 6.0 and above 5.4 and above Standing Alarms Alarm Bursts Commissioning Workflows 4.7 & 4.9 All releases 6.0 and above 6.0 and above 6.0 and above Supported Templates Custom Commands Streaming API All releases 6.0.1 and above 6.0.1 and above 6.0.1 and above Supported Granularity - Low Res All releases 6.0.1 and above 6.0.1 and above 6.0.1 and above Supported Granularity - High Res N/A 1.0 and above 6.3.1 and above 6.3.1 and above 6.3.1 and above Bandwidth Requirements (average, max collections enabled per device) DNS, system time, SNMP agents and traps, NTP, PTP, PAA, ports, management interfaces, L2 filters, VID sets, IPV4 filters, bandwidth regulators, regulator sets, COS profiles, VC agent, policies, traffic configuration, custom commands, Y.1731, MFD user and profile management 16 Kbps (low) 43 Kbps (high) Y.1564 Support All releases 6.0 and above 6.0 and above 5.5 and above Y.1564 Flows Supported 2 2 8 8 RFC-2544 Support All releases 5.4 and above 6.0 and above 5.5 and above RFC-2544 Flows Supported 1 1 1 1 EMIX Support N/A No No Yes Yes Number of Tests Defined (per device) 16 16 16 16 10,000 300 alarms in 15 seconds 16 Kbps (low) 43 Kbps (high) 43 Kbps (low) 147 Kbps (high) 200 Kbps (low) 350 Kbps (high) Number of Running Tests (per device) 1 1 1 1 Number of Running Tests (per Vision EMS TM ) Number of Tests defined (per VisionEMS TM ) 20 100,000 Supported Browsers Firefox version 21 and above, Google Chrome version 28 and above, Microsoft Internet Explorer 9 & 10 Hardware Platform Vision EMS Appliance (16 GB RAM, E3-1200 family processor, solid state redundant disks) Physical Dimensions 431 x 44 x 550 mm (12 Kg) Operating / Storage Temperature / Humidity 0 ~ 40º C / -20~70º C / 5~95%, non-condensing Accedian Networks Inc. 2351 Alfred-Nobel, Suite N-410 St-Laurent, Quebec, Canada H4S 2A9 Toll free: 1-866-685-8181 2013 Accedian Networks Inc. All rights reserved. Accedian Networks, the Accedian Networks logo, EtherNID, Fast-PAAs, High Performance Service Assurance, Performance Assurance Agent (PAA), Plug & Go, MetroNID, MetroNID GT, MetroNODE 10GE, MetroNODE LT, FS 10G, Multi-SLA, NanoNID, SkyLIGHT, SLA-Meter, Traffic-Meter, Vision EMS, VisionMETRIX and V-NID are trademarks or registered trademarks of Accedian Networks Inc. All other company and product names may be trademarks of the respective companies. Accedian Networks may, from time to time, make changes to the products or specifications contained herein without notice. Some certifications may be pending final approval, please contact Accedian Networks for current certifications. Platform Specifications Power Management Port Other Network Ports Regulatory Compliance Operating System / Database Redundancy Scheme Maximum Number of Devices Vision Collect Streams Maximum Number of Concurrent Users 1U ATX redundant 275W each, AC 100~240V @50~60 Hz One 10/100/1000 Mbps Ethernet (front) Four 10/100/1000 Mbps Ethernet (front) CE emission, FCC Class A, RoHS Ubuntu Server 12.04 LTS / MySQL Server Enterprise Edition 5.5.28 Cold Standby 3000 3000 @ one-minute granularity 1000 @ one-second granularity 20 7 06/14 rev 5.6