Wireless Access Points & Controllers Pakedge Wireless Networks provide enterprise grade wireless networking to users reliant on high speed, high throughput, and long range. Pakedge wireless access points provide up to 3x the range of traditional access points and come in multiple form factors, ensuring easy installation in any scenario. The C36 Wireless Controller synchronizes and manages multiple access points in real-time - ensuring a fully unified wireless system. Enterprise Grade Wireless An enterprise grade wireless solution is composed of wireless access points and a controller - the command and control hub for the network s APs. Pakedge wireless access points offer a high-power solution for any network, broadcasting 802.11b/g/n signals at 800mW. These wireless access points can be installed almost anywhere, thanks to their ability to be powered by PoE and multiple, use-case specific form factors. Multiple SSIDs prioritize data traffic, providing a smoother wireless experience overall. A separate guest network gives internet access to visitors without compromising overall security.
C36 Wireless Controller Wireless Harmony The C36 Wireless Controller serves as the command, coordination, and control center of a wireless network with multiple access points. In a network without a wireless controller, the wireless access points are unaware of each other and act independently - resulting in sub-optimal network performance, coverage gaps, and unreliable connectivity. AP (Access Points) settings may not be applied consistently throughout the network - leading to inconsistent policy application and enforcement, and potential problems with rogue access points and devices. The C36 eliminates these problems by working in conjunction with up to 30 W6x and W7x Wireless Access Points. It provides seamless, scalable, reliable wireless network access by managing each access point and optimizing wireless coverage with a suite of performance enhancing technologies. Key Features Optimized Wireless The C36 provides optimized wireless performance - enhancing speed and coverage while mitigating interference. Simple Management Configure up to 30 APs from any device on the network, all on one page. Enhanced Security The ability to push security settings across the network integrated individual device blocking and broadcast scheduling to provide a unified, secure, wireless network. Fast Deployment Automatic detection and configuration of APs, site surveys, a GUI wizard, heat maps, and visualization tools make expanding a network simple. Centralized Reporting Quickly and easily obtain information about any access point or client device on the network from anywhere in the world using BakPak Cloud mobile and web apps.
C36 Wireless Controller Advanced Features Performance Enhancements Heat Mapping Speed, coverage, and interference are optimized with SectorMaxx, TruStream, and SmartWav wireless technologies. Drag and drop access points to real-life floorplans to see how to get the best wireless coverage with your unique setup. Site Survey Device Blocking Perform automatic site surveys to view channels, signal strength, and identify rogue APs. Wireless Scheduling The C36 can blacklist or whitelist specific MAC addresses - allowing users to block unwanted devices specifically - or only allow known devices for added security. Guest Network Schedule when APs broadcast - limiting access to specified times and days of the week. Easily configure fully secure guest networks across all APs.
W6x Wireless Access Points Single-Band Wireless The W6x family of ultra-high powered access points is designed to provide a versatile, high power 802.11b/g/n wireless solution capable of providing best-in-class wireless coverage in any scenario. The W6 supports 4 SSIDs and 2 guest networks. W6 Wall Mount/Desktop Designed with four form factors - desktop/wallmount, rack-mount, in-ceiling, and outdoor - the W6x series of access points is an ideal way to implement a wireless network. Fast installation flanges for quick and accurate wall-mounting External high db omnidirectional antennas for maximum range and stability Rugged aluminum housing designed for maximum protection from interference and efficient cooling in attics, basements, and wiring closets. W6C In-Ceiling Patented, innovative, swing-out in-ceiling housing design Backplate heat-sink designed for in-ceiling operation, even in attics where temperatures fluctuate. Embedded flat PCBA antennas for clean, aesthetic performance Software-controlled LED off feature for visually unobtrusive operation W6O Outdoor Sealed, heat finned, IP67 rated diecast aluminum housing built to withstand even the harshest outdoor environments High gain omnidirectional antennas for maximum range and stability Software controlled LED-Off feature for visually unobtrusive operation W6R Rack Mount 1U rack-mountable housing designed for high wireless-n throughput Symmetrical mount brackets for rack mounting, wall mounting, or undercabinet mounting. Underside key holes allow wall mounting External high db omnidirectional antennas for maximum range and stability Rugged aluminum housing for maximum protection from interference
W7x Wireless Access Points Dual-Band Wireless The high-powered dual-band W7x access point runs on both the 2.4 and 5GHz bands, reducing interference compared to access points that operate on the 2.4Ghz band alone. The 2x2 setup of the W7 enables 300Mbps throughput - up to 3x the throughput of traditional W7 Wall Mount/Desktop wireless-n access points - while still supporting legacy devices. Supporting up to 16 SSIDs, it s ideal for high-capacity installations. All Pakedge APs can be powered by PoE - enabling easy setup without the concern for rewiring or available wall ports. 4 high db omnidirectional antennas Fast installation flanges for quick and accurate wall mounting Rugged aluminum housing designed for maximum protection from interference & efficient cooling regardless of the installation location W7O Outdoor Sealed, heat finned IP67 rated diecast aluminum housing to withstand even the harshest outdoor environments Power by either PoE or A/C outlet for convenient installation High gain omnidirectional external antennas for maximum range and stability W7R Rackmount Symmetrical rack brackets for rack, wall, or under-cabinet mounting External high db omnidirectional antennas for maximum wireless range and stability Rugged aluminum housing designed for maximum protection from interference and efficient cooling in rack installations
Access Point Specifications Access Point W6 W6C W6R W6O W7 W7R W7O Wireless Protocols 802.11b/g/n 802.11b/g/n 802.11b/g/n 802.11b/g/n 802.11a/b/g/n 802.11a/b/g/n 802.11a/b/g/n Wireless Band 2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4/5GHz 2.4/5GHz 2.4/5GHz Antennas 2x2 2x2 2x2 C36 Compatable ü ü ü ü ü ü ü Housing UL Rated ABS Housing IP67 Heat Finned IP67 Heat Finned Power Options PoE, AC PoE, AC PoE, AC PoE PoE, AC PoE, AC PoE Operating Temperature -1-1 Dimensions (LxWxH) 6.4 x 4.2 x 1.4 Diameter - 8.25 Depth - 2 Cutout Diameter - 7 7.5 x 5.5 x 1.75 11 x 9.5 x 2.5 9.1 x 6.25 x 1.5 11.25 x 5.6 x 1.75 10.6 x 9.5 x 2.9 Weight (lbs) 0.56 1.4 1.1 5 1.1 3.2 8.4 Package Contents Wireless Access Point, Ethernet Cable, Rack/Wall Mounting Hardware, Power Cable and Quick Start Guide C36 Specifications Interface Total Network Interfaces 2 Auto MDX auto-sensing 10/100/1000 (Copper, RJ-45) Console Port (Copper, RJ-45) 1 USB Interfaces 2 (USB 2.0) HDMI Interfaces 1 1 Environment Power Input 110-240v AC Power Consumption 55w Operating Temp 0-40 C (32-104 F) Operating Humidity 95% non-condensing Storage Temp -20-80 C (-4-176 F) Storage Humidity 95% non-condensing Dimensions Height x Width x Depth Weight 1U Rack Mountable System Performance 1.675in x 17.026in x 9.202in (4.254cm x 43.246cm x 9.202cm) 7.35lbs (3.33kg) - Controller 9.7lbs (4.39kg) - Packaged Yes Managed APs Up to 30 WLANs Multimedia & Quality of Service 802.11e/WMM Client Load Balancing Client Capacity Limit Suppressed SSIDs Depends on AP (v2) (v2) Management Configuration AAA AP Provisioning Centralized Management Centralized Reporting Security Standards Intrusion Detection MAC Filtering Guest Network Web user interface, CLI, SNMP v1,v2, v3 RADIUS (v2) Auto-upgrade, Auto channel & power optimization, VLAN tagging, Spanning Tree, Heat Map (v2) WEP, WPA, WPA2, IPv4, IPv6, PSK (v2), AES Rogue AP Detection Package Contents C36 Wireless Controller, Console Cable, Rack Mounting Hardware, Power Cable and Quick Start Guide 2014 Pakedge Device and Software Inc. All rights reserved. Pakedge, Pakedge Device and Software, BakPak, BakPak Cloud Management System, and TruStream a registered trademarks of Pakedge Device and Software in the United States and certain other countries. Pakedge Device and Software Inc. 3847 Breakwater Avenue Hayward, CA 94545 USA www.pakedge.com To locate a dealer near you contact us at (650) 385-8702 or sales@pakedge.com