Light as soft as a cloud. As part of Luxli s Softi series, the LED Ring Light with Camera Mount provides soft, flattering light without harsh shadows. Control the intensity when illuminating your subject with a variable dimmer and dial in the right amount of light for a proper exposure. The 4.7" (11.9 cm) diameter opening accommodates most lenses and places them at the center of the wraparound light, which is ideal for macro or portrait work. A bracket allows you to attach your lens and camera combos and offers vertical adjustment for a proper fit, while a macro slider helps to fine-tune your camera position to prevent and reduce light flares. This LED Ring Light emits a 5600 K color temperature or 3200 K with an optional tungsten filter. And the unit can be powered by a standard power outlet or up to two rechargeable batteries, making it a flexible choice for photographers and videographers alike.
Specifications Light source Color temperature Brightness Power Source Continuous operating time Battery charging time Output power Voltage Maximum lens diameter Ring light diameter Ring light dimensions (W D H) Weight (ring light and macro slider) 441 LEDs 3200 K (with tungsten filter) or 5600 K 11,000 lx per 19.7" (50 cm) AC power (with included adapter) or two Sony L-Series batteries Up to 150 min. Up to 5 hr. 24.66 W 7.4 to 14.8 V DC 4.7" (119 mm) 9" (23 cm) 11" 9.8" 2.2" (27.9 25 5.5 cm) 2.9 lb. (1.3 kg)
Precautions Do not attempt to disassemble, repair, or perform any unauthorized modifications on this device. Do not handle with wet hands, immerse in liquids, or expose to water and rain. Electric shock or fire may result. This device contains small parts which may pose a choking hazard. Keep out of reach of children. Do not operate this device in the presence of flammable gas or vapor. Do not use this product if it emits smoke or a strange odor. Disconnect the power source immediately to avoid personal injury, and contact the place of purchase. Observe caution when handling batteries; use only batteries approved by the manufacturer of this product. Do not stare or gaze at the LED panel for prolonged periods while the device is on.
Batteries are prone to leakage when fully discharged. To avoid damaging this product, be sure to remove batteries when leaving the product unattended. Do not cover the ventilation grille found at the rear of the device when in operation, and ensure the light is cool before storing. Do not use or leave this device in conditions of extreme heat, severe cold, or high humidity. The unit will display a decrease in brightness when the battery runs low. Be sure to replace the battery when necessary. Dispose of used batteries, packing, and old devices in accordance with appropriate environmental regulations. All images are for illustrative purposes only.
Overview Front 1. Battery release button 2. Battery mounts 3. Magnetic posts 4. Handle 1 2 2 1 Back 5. Power LED indicator 6. Power switch 7. Battery test button 8. Battery power indicator 9. Dimmer 10. Threaded sockets 11. Bracket locking knobs 12. DC power input 3 4 5 6 7 8 9 10 11 12
Macro Slider Top 1. 1/4"-20 camera mount 2. Macro slider guide 3. Macro slider mounting bracket Macro Slider Bottom 4. Camera locking wheel 5. Macro slider adjustment knob 6. 1/4"-20 threaded tripod mounts 7. Macro slider locking knob 1 2 3 4 5 6 7 Also Included Diffuser Tungsten filter Filter magnets 2 NP-F750 rechargeable batteries Dual battery charger Battery charger power adapter SFT-50R power adapter Power cord Padded carrying case
Powering the Ring Light Using the AC Power Adapter Mounting Batteries 1. Plug the 3-pronged end of 1. Place each battery in the the power cord into a power battery tray, aligning the source. conductor contacts of the battery with the metal prongs 2. Connect the other end of of the light unit. the power cord into the AC adapter. 2. Lock it in place by sliding the battery until it clicks. 3. Plug the AC adapter into the LED ring light s DC power input. 3. To remove a battery, press the corresponding battery release button.
Checking the Battery Power While the device is powered on, hold the battery test button to see how much power is remaining. Charging the Batteries 1. Plug one end of the battery charger s power adapter into a power source, and the other end into the dual battery charger. 2. Place each battery in a battery tray, aligning the conductor contacts of the battery with the metal prongs of the battery charger. An LED indicator will blink to show the battery charging progress.
Setting up the Ring Light Mounting the Macro Slider Mounting the Ring Light There are two 1/4"-20 threaded 1. Align the macro slider s sockets to mount the macro slider mounting bracket with the to a tripod. One is for horizontal threaded sockets on the back orientation. The other is for portrait of the ring light. orientation. 2. Use the locking knobs to 1. Align the 1/4"-20 threaded secure the bracket. socket with your tripod s mounting stud. 2. Use the tripod s locking mechanism to secure the macro slider.
Attaching a Camera 1. Seat your camera s threaded tripod socket onto the 1/4"-20 camera mount. 2. Rotate the camera locking wheel until secure.
Adjusting the Lens and Camera Vertical Alignment Macro Slider Control You can adjust the bracket Rotate the macro slider vertically to fit your camera and adjustment knob to fine-tune lens. Loosen the bracket locking your camera s focus point closer knobs, and slide the bracket up or farther away from your subject. or down.
Adjusting the Light Dimming Attaching the Filters Rotate the dimming knob until To install the diffusion or tungsten the desired effect is achieved. You filters, align the filter s magnets can adjust the desired brightness with the magnets on the ring light. level from 10% 100%.
One-Year Limited Warranty This LUXLI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Luxli Customer Service Department to obtain a return merchandise authorization ( RMA ) number, and return the defective product to Luxli along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser s own risk and expense. For more information or to arrange service, visit www.luxlilight.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com LUXLI is a registered trademark of the Gradus Group. 2016 Gradus Group LLC. All Rights Reserved. GG1
www.luxlilight.com