1Z0-597 SPARC T4-Based Server Installation Essentials Exam Summary Syllabus Questions
Table of Contents Introduction to 1Z0-597 Exam on SPARC T4-Based Server Installation Essentials... 2 Oracle 1Z0-597 Certification Details:... 2 Oracle 1Z0-597 Exam Syllabus:... 3 1Z0-597 Sample Questions:... 4 Answers to 1Z0-597 Exam Question... 6 1Z0-597 - SPARC T4-Based Server Installation Essentials pg. 1
Introduction to 1Z0-597 Exam on SPARC T4- Based Server Installation Essentials You can use this exam guide to collect all the information about SPARC T4-Based Server Installation Essentials (1Z0-597) certification. The Oracle 1Z0-597 certification is mainly targeted to those candidates who has some experience or exposure of Servers Systems and want to flourish their career with Oracle SPARC T4-Based Server Installation Certified Implementation Specialist (OCS) credential. The SPARC T4-Based Server Installation Essentials certification exam validates your understanding of the Servers Systems technology and sets the stage for your future progression. Your preparation plan for Oracle 1Z0-597 Certification exam should include hands-on practice or on-the-job experience performing the tasks described in following Certification Exam Topics table. Oracle 1Z0-597 Certification Details: Exam Name SPARC T4-Based Server Installation Essentials Exam Code 1Z0-597 Exam Product Version Exam Price Duration Server Administration USD $245 (Pricing may vary by country or by localized currency) 120 minutes Number of Questions 70 Passing Score 60% Validated Against No version for validation. Format Multiple Choice Recommended Training SPARC T4-Based Servers Implementation Specialist Schedule Exam Pearson VUE - Oracle Recommended Practice 1Z0-597 Online Practice Exam 1Z0-597 - SPARC T4-Based Server Installation Essentials pg. 2
Oracle 1Z0-597 Exam Syllabus: SPARC T4 Overview Enterprise Installation Standards (EIS) - Describe the target workloads for the SPARC T4 servers - Describe the SPARC T4 processor architecture - Describe the SPARC T4 server architecture - Explain the SPARC T4 cryptographic algorithms - Explain the SPARC T4 virtualization options (e.g., Oracle VM Server for SPARC) - Describe the Enterprise Installation Service methodology - Setup and generate self-contained installation documentation - Create an installation configuration plan - Create a test procedures plan - Explain the hardware acclimatization process - Describe the cable labeling and routing process - Describe the electrical grounding requirements - Describe Oracle Solaris requirements - Determine boot disk layout and mirroring - Use Live Upgrade, Boot environment, and Image Packaging System SPARC T4 Server Installation Oracle VM Server for SPARC - Describe the benefits of electrostatic discharge prevention - Rackmount the server, cable, and install peripherals - Configure the service processor - Secure the service processor - Update firmware - Perform host power on and Power On Self Test (POST) - Verify and/or upgrade RAID controllers - Install Oracle Solaris - Test CPU and memory with Sun Validation Test Suite (SunVTS) - Setup and configure Auto Service Request (ASR) - Run Explorer and register products - Troubleshoot common installation issues - Verify patch and firmware levels - Install Logical Domains (LDoms) manager - Harden the control domain - Configure the control domain - Install and configure guest domains 1Z0-597 - SPARC T4-Based Server Installation Essentials pg. 3
SPARC T4 Server Maintenance and Diagnostics - Describe customer and field replaceable components - Verify system serial number - Replace the motherboard - Perform PCIe card and riser removal and installation - Perform disk, power supply, and fan removal and installation - Describe memory configuration guidelines - Describe disk backplane configuration rules - Describe server management tools - Collect system error and state information 1Z0-597 Sample Questions: 01. Which three are included for each test in the Enterprise Installation Standards (EIS) Test procedure Plan? a) The test objective b) The test method c) The expected outcome of the test d) Troubleshooting for each failed test 02. What is main objective of having Enterprise Installation Standards (EIS)? a) To create a framework for tracking improperly installed systems b) To produce consistent, high quality installations c) To produce systems optimized for Oracle software deployments d) To create a framework for tracking properly installed systems 03. Error conditions by POST, Oracle Solaris Predictive Self-Healing (PSH), and Oracle ILOM are forward to which component for fault handling? a) POST b) Oracle VTS c) Oracle ILOM d) Oracle Solaris PSH 04. You lost your Oracle ILOM settings after a service processor firmware update. Why? a) You did not enable the Preserve Configuration option. b) You did not back up the Oracle ILOM configuration. c) Oracle ILOM settings must be re-established after every firmware update. d) You used the Oracle ILOM web interface rather than the CLI to perform the update. 05. Activating Auto Service Request (ASR) Assets. a) Is done on the Asset only b) Is done on both the Asset and the ASR Manager system 1Z0-597 - SPARC T4-Based Server Installation Essentials pg. 4
c) Is done on the ASR Manager system only d) Is done on My Oracle Support only 06. What is Critical Thread Optimization? a) The ability to dynamically allocate core resources among active threads b) The ability to bind individual threads to a processor c) Part of the Processor Sets feature of Oracle Solaris that defines a group of logical processors and schedules threads on them. d) Recognized by Oracle Solaris Scheduler as a thread that should run by itself on a single core 07. During the acclimatization process, what is the maximum positive or negative temperature gradient that is permitted for multi-layer boards? a) Approximately 2 C (4 F) per hour b) Approximately 4 C (7 F) per hour c) Approximately 6 C (11 F) per hour d) Approximately 8 C (4 F) per hour 08. You are unable to add an Oracle ILOM user account, what is one possibility that would cause this issue? a) You need to add SSH keys to the system before creating additional user accounts. b) You do not have the user management role enabled. c) You do not have the host control role enabled. d) You have exceeded the maximum number of 5 user accounts. 09. A faulty DIMM needs to be replaced on a SPARC T4-2 server. What are two ways to determine which DIMM on a memory riser is faulty? a) Run the Oracle ILOM show faulty command. b) Run Oracle VTS software. c) Run the Oracle ILOM al command. d) Press the Remind button on the memory riser. 10. Why are Electrostatic Discharge (ESD) "soft failures" the most serious type of failures? a) The damage is not immediately noticed or detected. b) The damage is immediate and easily detected. c) The damage corrupts firmware. d) The damage results in the failure of the entire system. 1Z0-597 - SPARC T4-Based Server Installation Essentials pg. 5
Answers to 1Z0-597 Exam Question QUESTION: 01 QUESTION: 02 QUESTION: 03 QUESTION: 04 QUESTION: 05, b, c Answer: b Answer: c Answer: d QUESTION: 06 QUESTION: 07 QUESTION: 08 QUESTION: 09 QUESTION: 10 Answer: b, d Note: If you find any typo or data entry error in these sample questions, we request you to update us by commenting on this page or write an email on feedback@oraclestudy.com 1Z0-597 - SPARC T4-Based Server Installation Essentials pg. 6