Revit MEP 2014 Add-in the difference is REAL SysQue June 17, 2013-14:15 Managed manufacturer specific objects and data in BIM Jim Reis, CFO TSI JReis@TSI-Software.com
TSI Overview: What We Do the difference is REAL TSI provides solutions that enable designers and contractors to develop fullyconstructible CAD or Revit models with real-world intelligent MEP components and ductwork. Model, schedule, estimate (cost), fabricate & install all from a single database Yields speed and accuracy in the construction process Reduces labor costs, increases efficiency and productivity and improves quality in the pre-fab shop and on the job site
AIA Levels of Development the difference is REAL LOD 100 - Conceptual design, the model consists of overall building massing and the downstream users are authorized to perform whole building types of analysis (volume, building orientation, cost per square foot, etc.) LOD 200 - Similar to schematic design or design development, the model would consist of "generalized systems or assemblies with approximate quantities, size, shape, location and orientation." Authorized uses would include "analysis of selected systems by application of generalized performance criteria." LOD 300 - Model elements are suitable for the generation of traditional construction documents and shop drawings. As such, analysis and simulation is authorized for detailed elements and systems LOD 400 - Suitable for fabrication and assembly. The MEA for this LOD is most likely to be the trade contractor or fabricator as it is usually outside the scope of the architect's or engineer's services. LOD 500 - The final level of development represents the project as it has been constructed - the as-built conditions. The model is suitable for maintenance and operations of the facility.
SysQue LOD the difference is REAL LODs go from the lowest level of conceptual approximation to the highest level of representational precision: 100 Conceptual 200 Approximate geometry 300 Precise geometry 400 Fabrication 500 As-built The BOM from SysQue is created to LOD 400 The service reports live, directly from the cloud that is home to hundreds of thousands of line items. Revit families that need to flex more than one size require size-dependent values for weight, cost and install times. SysQue keys off a unique data ID, including size, to return detailed reports that export directly from Revit MEP with SysQue BOM to Excel.
What is SysQue the difference is REAL Revit MEP 2014 Data Content Service
Download Data Live Updates Material Cost Labor Part No. Weight Cloud BOM Live Updates Material Cost Labor Part No. Weight
SysQue Pipe SysQue Pipe enables real manufacturers content to be modeled by designers and contractors with construction and fabrication levels of development (LOD 300 and 400). Includes pipe connectivity, true cut length, fitting counts, and auto flanges Supports tee-drill, thread-o-lets, stub-in taps on pipes. Associated PDF is accessible directly in native Revit.
SysQue Duct Duct Construction Standards, including Ductwork Pressure Classes, directly in Revit. Includes saddle taps and allows flat/round or round/round in one system. Associated PDF with specifications is also accessible directly in native Revit.
SysQue Fabrication Reports the difference is REAL HVAC duct reports with depth lengths and offsets Export to Excel
SysQue Data A cloud-based MEP managed content service downloaded directly to Revit MEP Includes real manufacturerspecific Revit MEP content Issues update notification when manufacturers change or update content information ISO 9001:2008 certified for BIM data content management for MEP
SysQue BOM SysQue BOM creates detailed bills of material to LOD 400 constructible definitions as defined by the AIA BIM standards. Reports live from the Building Data cloud database, home to nearly one million line items. Families that need to flex more than one size require size dependent values for weight, cost and install times. SysQue returns detailed reports that export directly from Revit MEP to Excel.
SysQue Supports Model real manufacturers hangers directly in Revit MEP with accurate hanger rod lengths and structural attachments (beam clamps or inserts). Includes output to Trimble MEP Total Station units in both MEP or TFL file format. Hangers and supports are structure-aware and adjust hanger spacing and rod length based on structural beams, versus the under side of the floor above.
SysQue Spool Model to LOD 400, suitable for fabricating isometric spools directly in Revit MEP. Built-in spool management for color isolation; standard naming conventions make isometric spool creation fast and accurate. Intelligent interface automates sheet views, bill of material (BOM) schedules, component annotation and the dimensioning process. Unlike the AutoCAD spooling (one DWG one spool), Revit MEP allows for true BIM spool sheets in Revit mechanical model. Integrate seamlessly with ipad or Tablet using 360.Autodesk.com cloud solutions.
SysQue License SysQue is a Revit MEP 2014 content and configuration service. Concurrent licenses are shared in the cloud via the Internet SysQue licensing is good for 365 days (non-perpetual license) Your software investment can be an accounting expense verses capitalization over 36 months. Service includes all SysQue Revit MEP 2014 content www.building-data.net Company: TSI-Software Divison: Rocklin, CA SysQue License Pull: Total Quanity: 3 Checked-out: 2 Available: 1 Name First Last E-Mail User 1 Jim Reis jreis@tsi-software.com 1 Checked-out User 2 Kenny Eastman keastman@tsi-software.com 1 Checked-out User 3 Bernie Tamasy btamasy@tsi-software.com Checked-in User 4 Nate Moore nmoore@tsi-software.com Checked-in User 5 Bill Whitney bwhiteny@tsi-software.com Checked-in
Revit MEP 2014 Add-in the difference is REAL SysQue June 17, 2013-14:15 Managed manufacturer specific objects and data in BIM Jim Reis, Founder/CFO TSI JReis@TSI-Software.com