COUNTER X/Yaxis display addition of 2-scale data zero setting machining method arc machining mode calculator S/INC, SDM coordinate " ½" calculation IS-DR2 X/Y/Z axis display addition of 2-scale data zero setting machining method arc machining mode calculator S/INC, SDM coordinate " ½" calculation SPECIFICTION pplication Scale input ports Resolution Functions Dimension Weight IS-DR2 * IS-DR3 IS-DR3 two-axis three-axis 2 3 0.1µm, 0.2µm, 0.µm, 1µm, 2µm, µm, µm addition of 2-scale data, linearity error compensation, smoothing, RS2C interface unit, CD code out, zero setting, preset, resolution setting, counting direction setting, inch/mm conversion, S/INC conversion, expansion/contraction coefficient setting, "½" calculation, detecting RI, bolt-hole circle machining, ramp circle machining 29 1 mm 1.kg * STNDRD DEIVERY Main unit RS2C cable Mounting bracket Software CD for RS2C Ground cable *dd suffix on code No. to devote C voltage and plug (refer to page V1) R1
INER SCE IS-1-300 Series IS-1 and IS- Total length 3 Mounting hole pitch 2 Max. travel length 1 Effective length 21 2..2 Series IS- Total length 3 Mounting hole pitch 2 Max. travel length 1 Effective length 29 27.3 23. 23. 1.3±0.3. 0±0.1 90 2-M-H 1.3±0.3 1. 0±0.1 90 2-M-H 21±0.1.2 2-M-H 0±0.1 29±0.1 0±0.1 1 2-M-H 1 R2
Effective length() 0mm Series IS-1 IS-1-0 Series IS- IS--0 Series IS- IS--0 0mm IS-1-0 IS--0 IS--0 mm IS-1- IS-- IS-- 0mm IS-1-0 IS--0 IS--0 20mm IS-1-20 IS--20 IS--20 300mm IS-1-300 IS--300 IS--300 30mm IS-1-30 IS--30 IS--30 00mm IS-1-00 IS--00 IS--00 0mm IS-1-0 IS--0 IS--0 00mm IS-1-00 IS--00 IS--00 0mm IS-1-0 IS--0 IS--0 00mm IS-1-00 IS--00 IS--00 0mm IS-1-0 IS--0 IS--0 700mm IS-1-700 IS--700 IS--700 70mm IS-1-70 IS--70 IS--70 00mm IS-1-00 IS--00 IS--00 0mm IS-1-0 IS--0 IS--0 900mm IS-1-900 IS--900 IS--900 90mm IS-1-90 IS--90 IS--90 00mm IS-1-00 IS--00 IS--00 10mm IS--10 mm IS-- 1300mm IS--1300 100mm IS--100 0mm IS--0 0mm IS--0 1700mm IS--1700 0mm IS--0 1900mm IS--1900 00mm IS--00 SPECIFICTION 1(mm) 2(mm) 3(mm) Resolution Max. response speed Scale grating pitch Scale reference point pitch Cable length Series IS-1 Series IS- Series IS- +30(<90) +0( > 90) +30(<90) +0( > 90) +30(<90) +0( > 90) +1(<90) +12( > 90) +1(<90) +12( > 90) +13(<90) +1( > 90) +19(<90) +19( > 90) +19(<90) +19( > 90) +1(<90) +17( > 90) 1µm µm 0m/min µm 0µm 90m/min ±(+/00)µm is the effective length in mm 3.m(: 0-90mm) m(: 00-0mm) m(: 0-00mm) µm 0m/min STNDRD DEIVERY Main unit '' shape support nti-dust cover Plain base (for > 0mm) R3
DIGIT HORIZONT SCE bracket 71-300 type 1 7 3 Resolution: 0.01mm/0.000" uttons: on/off, zero, mm/inch utomatic power off, move the digital unit to turn on power attery CR US data output Made of stainless steel Supplied with bracket to be mounted on the back Optional accessory: SPC cable(page 1-2) -M3 3 Resolution: 0.01mm/0.000" utton function: on/off, zero, mm/inch, S, data preset bsolute and incremental measurement attery SR or R Data output Made of stainless steel Supplied with bracket to be mounted on the back 7 R1.7 2 2-Ø3. 71-00 type. -M3 3 (mm) (mm) Range Type Range Type 71-0 0mm ±0.02mm 21 71-00 00mm ± 0.0mm 90 71- mm 2 71-00 00mm ±0.0mm 790 71-0 0mm 31 71-00 00mm ±0.mm 990 71-300 300mm ±0.0mm 71-00 00mm ±0.mm 1190 71-00 00mm ±0.0mm 90 R
DIGIT VERTIC SCE D E 0 -M3 C 7 F 72-300 bracket Resolution: 0.01mm/0.000" uttons: on/off, zero set, mm/in, data set attery SR or R Data output Made of stainless steel Supplied with bracket to be mounted on the back R1.7 2-Ø3. 2 (mm) Range C D E F 72-0 0mm ±0.02mm 0 72- mm 0 29 72-0 0mm 0 3 72-300 300mm ±0.0mm 0 72-00 00mm ±0.0mm 0 72-00 00mm ±0.0mm. 72-00 00mm ±0.0mm. 7 72-00 00mm ±0.mm. 9 72-00 00mm ±0.mm. 11 R
PROFIE PROJECTOR CODE ISP-Z301* projector screen data processing unit screen rotation knob X lens surface illumination stage printer illumination control panel focus wheel *dd suffix on code No. to devote C voltage and plug (refer to page V1) OPTION CCESSORY lens with half-reflection mirror rotary table overlay chart reading scale/standard scale ( glass diameter 0mm, graduation 2 ) (protractor: graduation 1 radius: 1mm increment) ( check magnification accuracy ) X magnifier holder with clamp swivel center support V-block with clamp R
SPECIFICTION ens magnification view field working distance X (standard) Ø30mm 7mm X (optional) Ø1mm 9mm 0X (optional) Ømm 2mm 0X (optional) Ø3mm 2mm Max. workpiece height Magnification accuracy Image mm ±0.1% inverted 91mm 13mm 13mm diameter: Ø300mm Projector screen rotation range: 0 ~30, resolution: 1' or 0.01, accuracy: ' reference lines: cross-hairs metal stage size 30 12mm glass stage size 19 9mm range: 0mm Stage X-Y stage travel resolution:1µm accuracy: (+/2)µm is the measuring length in mm Z(focus) travel range 0mm max. load capacity kg contour illumination: 12V/0W halogen lamp, 2-step(high/low) brightness adjustment Illumination surface illumination: V/W halogen lamp display X-Y stage travel, screen rotation output RS2C measure coordinate of point measure coordinate of line Data processing unit function measure center coordinate, radius of circle with three points measure distance between two objects measure angle with four points or two lines set origin of coordinate coordinate transform set midpoint of coordinate Dimension ( W H) Weight 0 70 1mm 13kg STNDRD DEIVERY Main unit X lens with half-reflection mirror Overlay chart clip evel nti-dust cover pcs OPTION CCESSORY X lens with half-reflection mirror 0X lens with half-reflection mirror 0X lens with half-reflection mirror Rotary table Overlay chart 0mm standard scale 30mm reading scale X magnifier Holder with clamp Swivel center support V-block with clamp ISP-Z301-ENSX ISP-Z301-ENS0X ISP-Z301-ENS0X ISP-Z301-TE ISP-Z301-CHRT ISP-Z301-SCE0 ISP-Z301-SCE30 ISP-Z301-MGNIFIER ISP-Z301-HODER ISP-Z301-SUPPORT ISP-Z301-VOCK R7