Product Information PI X-Ray FLAT PANEL IMAGER FDX4343R Active Area: 430(H) 439(V)mm (16.9 17.3 ) FEATURING: High MTF High Sensitivity High Contrast Short Cycle Time High Resolution and High DQE CsI Phosphor Screen TETD has long experience to develop and manufacture fine and thick pillar structure of CsI phosphor screen with high resolution and high sensitivity. Low Noise ROIC and Analog Circuit ROIC and analog circuit are designed and specified to be suitable for high sensitivity X-ray conversion layer. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO., LTD. (TETD) for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others. The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of equipment incorporating this product.
COMPONENTS AND CHARACTERISTICS Flat Panel Sensor Unit Sensor Protection Plate Cooling Input Power Consumption Overall Dimensions Weight Carbon Fiber Plate Natural Air Cooling DC24V (from AC/DC Power Supply) Maximum 20W 512 495 43mm (W(H) D(V) (H)) 9 kg (approx.) Power Supply Unit Input Output Overall Dimensions Weight AC100 to 240V,50/60Hz DC24V 1.3A 60W 126 200 60mm (W(H) D(V) (H)) 1 kg (approx.) Environmental Under delivery and stock Temperature -15 to 55 Humidity 10 to 90 % (Non-Condensing) Pressure 50 to 106 kpa Under operating Temperature +10 to 35 Humidity 30 to 85 % (Non-Condensing) Pressure 70 to 106 kpa -2-
Image Format X-ray Conversion Layer Active Area Pixel Matrix Pixel Pitch Cycle Time MAIN CHARACTERISTICS Cesium Iodide (Csl) with Amorphous Silicon (a-si) Photodiode 430 (H) 439 (V) mm (16.9 17.3 inch) 3008 (H) 3072 (V) 143 μ m Shot to Shot 6sec. Performance Limiting Resolution 3.7 Lp/mm typ. MTF (2.0 Lp/mm, 70 kvp,1 1) 36 % typ. DQE (DQE (0) Quantum - Limited) > 70 % A/D Conversion 14 bit Ratings Energy Range Maximum Entrance Dose (low Gain) (Linear Output Range) 40 to 150 kvp 4 mr / frame Interface Data Output Command Control X-ray Synchronization Control Power Input 16 bit Digital Output Ethernet (1000BASE-T) Ethernet (1000BASE-T) External DC24V 2A (from Power Supply Unit) Image Acquisition Mode Table Mode Frame rate (Frame/s) Binning/Non-Binning 3072 lines Full Scan mode 1 (approx) Non-binning X-ray period (ms) Standard: 500 (Variable between 50 to 500) Optional: 1000, 2300, 3200 or 4000-3-
ACCESSORIES Cables: AC Cable 1.8m 1 GND Cable 3m 2 OPTION ACCESSORIES DC Cable (Sensor Unit - Power Supply Unit) ECB-F002A-04/G 0.4m Including connectors ECB-F002A/G 2m - ECB-F002A-5/G 5m - ECB-F002A-10/G 10m - ECB-F002A-20/G 20m - * Please contact to our local sales for further information. -4-
Product Components and Interface Sensor Unit DC24V Power Supply Unit Control Board Image Data & Control Ethernet PC (User) X-ray Sync X-ray Control Unit (User) Gate Driver ROIC Unit TFT Panel LED Display Mode Power Turn on when power on Healthy Turn on when self check is good Network FPI system can communicate with PC Imaging Turn on when acquisition and flashing during data read -5-
Image Acquisition Communication Block Diagram PC Ethernet Connector FPI Command Ethernet module D-Sub Connector CPU Signal IO module X-Ray Controller Communication Availability Signal Name Type Ethernet Command Control D-Sub Signal Control (PC) (X-ray Controller) EXP_REQ INPUT OK OK EXP_OK OUTPUT N.A OK *EXP_REQ Command Response -6-
DIMENSIONAL OUTLINE (Flat Panel Sensor Unit) Unit: mm *1 495±1 *1 501±1 *2 512 43±1 IP Address Select Power Connector Protective Earth (M4 L=5) * 1 Include a Screw Head * 2 Include a Power Connector D-Sub Connector LAN Connector LED Display for Mode Wired Image 532-7-
(30.5) (28 )131±0.5 FDX4343R (Flat Panel Sensor Unit) Unit: mm 497±0.5 124.5±0.5 93.5±0.5 93.5±0.5 124.5±0.5 30.5±0.5 10-M4 Depth 8 28±0.5 85±0.5 220±0.5 492±0.5-8-
(Power Supply Unit) Unit: mm 60±1 200±1 200±1 126±1 QR CODE Label Protective Earth (M4 L=8) -9-
OVERSEAS SUBSIDIARIES AND AFFILIATES EU REPRESENTATIVE TOSHIBA ELECTRONICS EUROPE GMBH HANSAALLEE 181 40549 DÜSSELDORF, GERMANY PHONE +49 (211) 5296 107 FAX +49 (211) 5296 402 For Sales & Technical Services, please contact the following representative: TOSHIBA ELECTRONICS EUROPE GMBH HANSAALLEE 181 40549 DÜSSELDORF, GERMANY PHONE +49 (211) 5296 107 FAX +49 (211) 5296 402 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC. 2150 EAST LAKE COOK ROAD, SUITE 310 BUFFALO GROVE, ILLINOIS 60089 U.S.A PHONE +1 (847) 484-2400 FAX +1 (847) 541-7287 TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS) RM1606, SH-PLAZA, No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 200001, CHINA PHONE +86 (21) 6361-0077 FAX +86 (21) 6351-5760 Product Development Engineering Dept. 1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-8550, JAPAN PHONE +81-287-26-6666 FAX +81-287-26-6060 http://www.toshiba-tetd.co.jp/ Toshiba Electron Tubes & Devices Co., Ltd. meets the Environmental Management System Standard, ISO14001 Toshiba Electron Tubes & Devices Co., Ltd. meets internationally recognized Standards for Quality Management System ISO9001, ISO13485. PE-FDX4343R_C 2015-04