GLOW STEREO Colour Changing BLUETOOTH SPEAKERs Please recycle this packaging responsibly User Manual JB. 4307 / Made in China. KitSound 2015. Christchurch, Dorset, BH23 4FL, UK
We are craftspeople. We are musicians. We are KitSound And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We ll settle for nothing less.
At KS we believe your music deserves to be showcased on great quality products that don t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that s worth celebrating.
Please read this manual carefully before use. Box contents 2 x KS Glow Stereo Speakers Remote control 2 x USB charging cable User manual Functions On the Glow A. Power/Lights/Pairing B. DC input C. LED indicator A C On the remote 1. Brightness up 2. Brightness down 3. Lights ON/OFF 4. Red 5. Green 6. Blue 7. Purple 8. Yellow 9. Cyan 10. Candle (orange) 11. White 12. Cycle colour 13. Previous track 14. Next track 15. Play/Pause 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 20 21 22 23 24 16. Volume down 17. Volume up 18. Power/Bluetooth 19. Pairing 20. Flash 21. Strobe 22. Fade 23. Smooth 24. Music lights B 16 17 18 19 6 7
Instructions for use Basic controls 1. Plug the power adaptor into a convenient AC wall outlet and switch it on 2. Insert the connector into the DC input (B) 3. The LED indicator (C) will be red to indicate it is charging 4. When the LED indicator (C) goes out, this means the battery is fully charged Note: Charging time will take up to 7 hours to complete. When fully charged, you can then use the Glow without the mains power adaptor. To turn on 1. Using the remote, press and release the power button (18) to turn the speakers on. This will automatically turn both of the speakers on 2. Using the remote, press and hold the power button (18) to turn the speakers off. This will automatically turn both of the speakers off 3. On the speaker, press and hold the power button (A) on both speakers at the same time to turn the speakers on 4. On the speaker, press and hold the power button (A) on both speakers at the same time to turn the speakers off Bluetooth setup Pairing a Bluetooth device With both units turned off: 1. Follow the steps in To turn on to turn the Glow Stereo on 2. The LED indicator (C) will flash blue on the Primary Glow and be a solid green on the Secondary Glow 3. Press and release the pairing button (19). The Primary Glow will now be quickly flashing blue and looking for your device 4. Using the controls on your Bluetooth device, select the KS GLOW STEREO in your Bluetooth settings to pair. If your device requests a password, enter 0000 5. If you have difficulty, refer to your device s user manual for instructions on pairing and connecting Bluetooth devices 6. When connected, the LED indicator (C) will turn solid blue on the Primary Re-pairing or pairing new devices 1. Ensure that previous devices paired to the Glow Stereo have their Bluetooth disabled 2. Start from No.3 in Pairing a Bluetooth device and follow the steps Note: One Glow will be showing a flashing blue light on the LED light indicator (C) and the second will be showing a solid green on the LED light indicator (C). The blue LED Glow is the Primary and the green LED Glow is the Secondary. 8 9 [continued...]
[...continued] Bluetooth setup Playing audio wirelessly 1. Follow the instructions in the Pairing a Bluetooth device section 2. Use the controls on your device to select a track 3. To play or pause the selected track, use the controls on your device or press the Play/Pause button (15) 4. To skip a track, use the controls on your device or press the Previous Track button (13) or Next Track button (14) 5. Audio played through the connected Bluetooth device will now be heard through the speakers 6. The volume can be adjusted on both your device and the Glows. To change the volume on the Glows, press the Volume down (16) and Volume up (17) buttons Note: Track control functions from the buttons on the Glows and remote will require your device to have Bluetooth profile AVRCP. Please check your device s manual if unsure. Controlling the lights The Glow Stereo has many different settings for the lighting effects. They can be used whilst the speaker is turned on or off. Press (don t hold) the Power button (A) to turn the lights on or off. You can also press the light ON/OFF button (3) on the remote. Once the light is on, you can: Press the: 1. Red button (4) 2. Green button (5) 3. Blue button (6) 4. Purple button (7) 5. Yellow button (8) 6. Cyan button (9) 7. Candle (orange) button (10) 8. White button (11) 9. Cycle colour button (12) Change the brightness of the light The brightness setting will only affect solid colours. Press and hold the: 1. Brightness up button (1) to increase the brightness 2. Brightness down button (2) to decrease the brightness 10 11 [continued...]
[...continued] Controlling the lights Change the effects Press the: 1. Flash button (20) and the lights will flash through all the different colours automatically 2. Strobe button (21) for the lights to strobe on and off. You can change the colour then press the Strobe button (21) to strobe different colours 3. Fade button (22) for the lights to fade in and out red, blue and green (the colours cannot be changed) 4. Smooth button (23) for the lights to smoothly change between red, blue and green (the colours cannot be changed) 5. Music Lights button (24) for the lights to change to the beat of the music. This will only work if the volume is set to maximum on both your device and the Glow. When the Glow is not detecting the music it will automatically switch to Smooth mode. When the music is detected, it will automatically start flashing the lights in time to the music (providing the Music Lights button (24) was the last button to be pressed) IP54 rating The Glow Stereo is rated IP54. This means that the Glow Stereo can be exposed to splashing water for up to 5 minutes and no harm will come to it. It also means that the Glow Stereo is dust protected. Do not expose the Glow Stereo to jets of water or submerge it entirely as it is not capable of preventing damage to itself in these circumstances. Please also make sure that the protective rubber flap is properly shut, otherwise the IP54 rating becomes invalid. Care for your Glow Stereo Please DON T: Drop the Glow Stereo as this will invalidate your warranty Open up the Glow Stereo as there are no user serviceable parts inside Expose the Glow Stereo to extreme temperatures or rapid changes of hot to cold or vice versa Please DO: Clean the Glow Stereo with a soft dry cloth and no detergents Specifications Bluetooth V2.1 Bluetooth range up to 10 m Output RMS 3 W x 2 Battery 4400 mah Li-ion Charge time up to 7 hours Play time up to 18 hours Water-resistant rating IP54 Unit size H150 x W150 x D150 (mm) 12 13
Troubleshooting We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us on: support@kitsound.co.uk The use and operation of this speaker is beyond our control. Warranty of the Glow Stereo is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 14 15