HUGE SAVINGS! LIMITED TIME ONLY!

Valid from Aug. 17, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. Mitutoyo Savings! Dial Calipers - Series 505 Resolution:.001 Extra-rigid main beam Sliding surfaces of the main blade are coated with titanium (except 12 model) Digimatic Calipers - Series 500 Featuring Absolute Linear Encoder technology and large.295 high LCD digits. Measuring Range Range/Rev Accuracy A.C.T. No. 505-675 0-6.10 ±.001 187329 $118.00 $30.00 505-676 0-8.10 ±.001 173258 $164.00 $41.00 505-677 0-12.10 ±.002 187330 $276.80 $69.20 Coolant Proof Digimatic Calipers Features digital display as well as protection against dust and water spray from any direction. The world s first coolant-proof caliper! Measuring Range LCD Resolution A.C.T. No. 500-196-30 0-6 (0-150mm).0005 (0.01mm) 282331 $143.00 $36.00 500-197-30 0-8 (0-200mm).0005 (0.01mm) 284648 $206.00 $52.00 500-193 0-12 (0-300mm).0005 (0.01mm) 114610 $389.60 $97.40 500-506-10 0-24 (0-600mm).0005 (0.01mm) 36007 $828.00 $207.00 With SPC Output Measuring Range LCD Resolution A.C.T. No. 500-173 0-12 (0-300mm).0005 (0.01mm) 129446 $424.80 $106.20 Dial Indicator and Magnetic Stand Set Moulded custom case with indicator: 1 range,.001 graduation and 0-100 dial reading. Mag base with 132 lbs. pull. Great value! Measuring Range LCD Resolution A.C.T. No. 500-752-10 0-6 (0-150mm).0005 (0.01mm) 187346 $168.00 $65.00 500-753-10 0-8 (0-200mm).0005 (0.01mm) 148736 $257.60 $64.40 500-754-10 0-12 (0-300mm).0005 (0.01mm) 175012 $363.00 $91.00 HUGE SAVINGS! LIMITED TIME ONLY! Dial Indicator Magnetic Stand A.C.T. No. 7046PCK 2416F 7010SN 151702 $173.60 $43.40 Offer only valid from August 17, 2015 through to December 31, 2015, while quantities last. Some items may not be exactly as shown. SERVING WESTERN CANADA FOR OVER 50 YEARS 100% CANADIAN OWNED

VALID FROM AUG. 17 - DEC. 31, 2015 Dial Indicators - Series 2 Group 2 Dial Indicators feature Inch ANSI Standard stem (3/8 ) with lug back. Regular dial Indicator shown. While quantities last. Pocket Test Indicator Set Jeweled bearings assure higher sensitivity and accuracy. 513-518T is a complete set including accessories and carrying case. Grad. Range Dial Accuracy A.C.T. No. Reading 513-518.001.04 0-20-0 ±.0002 169496 $117.60 $29.40 513-518T.001.04 0-20-0 ±.0002 150400 $140.80 $35.20 Range Grad. Dial Reading A.C.T. No. 2416S-10* 1.001 0-100 36377 $108.00 $27.00 2416S 1.001 0-100 64780 $94.00 $24.00 2424S-19 2.001 0-100 36379 $193.60 $48.40 2414S.5.001 0-100 196938 $94.00 $24.00 *Jeweled Bearings Magnetic Back Series Dia. A.C.T. No. 900928 2 57mm 60073 $37.33 $2.67 Quick Set Test Indicators - Series 513 Horizontal Type Direct gear train design means a higher level of sensitivity and reliability. Features jeweled bearings and standard dovetail mount. Complete unit includes: 2 contact points (.039 &.118 ), 2 mounting stems with nut (3/8 & 5/32 ),1 square arm and 1 swivel clamp. While quantities last. Unit Grad. Range Dial Reading Accuracy A.C.T. No. 513-402 Basic Unit.0005.03 0-15-0 ±.0005 109739 $100.00 $25.00 513-402T Complete Unit.0005.03 0-15-0 ±.0005 107938 $141.60 $35.40 513-403 Basic Unit.0001.008 0-4-0 ±.00001 111044 $124.00 $31.00 Magnetic Stand Mitutoyo Magnetic Stands accept all AGD-type Dial Indicators, Test Indicators and Probes having 3/8 Dia. shank and/or Lug Back with 1/4 Dia. mounting hole. ON-OFF Switch offers instant mounting. While quantities last. Universal Magnetic Stand This magnetic stand is a device that enables the setting of dial indicators and dial test indicators in any position for maximum flexibility 5 pivot points Can be used with instruments with stem diameter: Ø8mm, Ø6mm, 3/8 Description Magnetic Pull A.C.T. No. 7010SN Stand with 6 rod and universal clamp 132 lbf 116918 $78.00 $20.00 Height Max. Art. Radius Base Mounting Strength Resistance to 90 A.C.T. No. 7033B 431 mm 353 mm 600N 1.5 kgf 264275 $182.00 $46.00 2

VALID FROM AUG. 17 - DEC. 31, 2015 Screw Pitch Gage Set Thread pitch size is stamped on each gage Range Type No. of Leaves A.C.T. No. 188-151 0.4-7 mm TPI Metric & Unified (60 ) 51 35704 $56.80 $14.20 Universal Bevel Protractor Steel Gage Block Sets - Rectangular Mitutoyo offers a complete selection of gage blocks available in a choice of rectangular or square, metric or inch. Gages are sold separately or in sets as seen here. A Certificate of Accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block. Hardened stainless steel, rust and wear resistant for long life Flush-reading, no parallax error, gives a high degree of accurate measurements With magnifier glass for easier and faster reading Comes with protective case No. of Blocks 516-903-26 81 Blocks Included.1001 -.1009 by.0001 increments,.101 -.149 by.001 increments,.05 -.95 by.05 increments and 1-4 by 1 increments Grade A.C.T. No. AS-1 278746 $1,573.60 $393.40 Bore Gage Graduation Details A.C.T. No. 187-904 Dial: 1 degree Vernier: 5 min Comes with 6 blade (187-104) and Clamp box for Inch Height Gages (950749) Digimatic Depth Gage 35697 $287.00 $72.00 ABSOLUTE Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery Base and measuring faces are hardened and micro-lapped Optional wider extension base are available. (up to 450mm range models) With SPC data output Most popular bore gages Carbide-tipped contact points for durability The dial indicator is fully protected by a rugged cover Optional extension rods can be attached for measuring deep holes While quantities last Indicator not included Range Number of Anvils A.C.T. No. 511-753 2.0-6.0 11 250617 $342.00 $86.00 511-932 0.7-6.0 26 (2 sub anvil) 88101 $840.00 $210.00 Range Resolution Accuracy A.C.T. No. 571-213-10 0-12in (0-300mm).0005in (0.01mm) ±.0015 124604 $450.00 $116.00 Telescoping Gages - Series 155 Edge Finder Mitutoyo edge finders are hardened and ground on all surfaces. While quantities last. Shank Dia. Tip Dia. A.C.T. No. 050101 3/8 (.375 ).20 58042 $22.40 $5.60 050102 1/2 (.5 ).20 58043 $23.20 $5.80 Range No. of Gages A.C.T. No. 155-903.313-6 6-gage set 35549 $188.80 $47.20 3

VALID FROM AUG. 17 - DEC. 31, 2015 Outside Micrometers Wide measuring range with interchangeable anvils Carbide-tipped spindle Provided with Ratchet Stop for constant force While quantities last Tubular Inside Micrometer Series 137 Range Description A.C.T. No. 104-137 0-6 Includes 6 Anvils & 5 Standards 35348 $358.00 $90.00 104-138 6-12 Includes 6 Anvils & 6 Standards 35349 $575.00 $144.00 Depth Micrometers - Series 129 Ratchet stop for consistent and repetitive measurements. Includes interchangeable rods (6 pcs). While quantities last. Range Extension Rods A.C.T. No. 137-212 2-12.5,1,2 (2pcs.),4 in 193857 $316.00 $79.00 137-214 2-40.5, 1, 2, 4 (2pcs), 6, 8, 12 35491 $508.00 $127.00 Inside Micrometers - Series 141 Popular measuring instrument due to ease of use and wide range of measuring capacity. Range Resolution Base Length A.C.T. No. 129-128 0-6.001 2.5 35465 $203.00 $51.00 129-132 0-6.001 4.0 35467 $216.00 $54.00 Range Spacing Collar Rod Diameter A.C.T. No. 141-233 2-12.500.248 35511 193.60 $48.40 Outside Micrometers - Series 103 The 103 Series is the workhorse of micrometers. Carbide faces, Ratchet Stop for exact Outside Micrometer Sets While quantities last. repetitive readings. Includes standards. While quantities last. Range Graduation A.C.T. No. 103-177 0-1.001 35279 $76.80 $19.20 103-178 1-2.001 35280 $88.00 $22.00 103-179 2-3.001 35281 $109.60 $27.40 103-217 2-3.0001 35319 $128.80 $32.20 103-180 3-4.001 35282 $123.20 $30.80 103-181 4-5.001 35283 $132.00 $33.00 Range Graduation A.C.T. No. 103-904-10* 0-6.001 35332 $736.00 $184.00 103-907-40* 0-6.0001 267896 $688.80 $172.20 103-909 6-12.0001 35337 $1,324.80 $331.20 103-908-40 0-12.0001 270267 $1,730.00 $444.00 *Includes Standards 4

VALID FROM AUG. 17 - DEC. 31, 2015 Steel Rules - Series 182 Satin chrome finish and stainless tempered. Engraved on front side only. Backside has Inch/Metric equivalents. While quantities last. Size Graduations Width A.C.T. No. 182-101 6 (4R) 1/8 1/16 1/32 1/64 3/4 35583 $13.60 $3.40 182-105 6 x 150mm 1/32 1/64 1mm 2mm 3/4 35587 $13.60 $3.40 182-201 6 (4R) 1/8 1/16 1/32 1/64 1/2 35611 $12.80 $3.20 182-205 6 x 150mm 1/32 1/64 1mm 2mm 1/2 35615 $12.80 $3.20 Combination Square Sets - Series 180 Combination Square sets are available in a large variety of styles and sizes. Set Type Length Blade Model Square Head Model Center Head Model Protractor Head Model A.C.T. No. 180-905B Inch 12 (4R) 180-501B 180-102U 180-202U* 180-301U 281928 268.80 $67.20 *Hardened Cast Iron Center Head Surftest - 210 Series User-friendly hand-held unit 2.4 color LCD display with back lighting is switchable to vertical or horizontal left and right-hand views The built-in battery allows approximately 1,000 measurements Optional Micro SD card can store up to 10,000 measurement results External output Digimatic SPC, RS-232C and USB The Surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994, JIS B0601-1982), VDA, ISO- 1997, and ANSI. HR-110MR - Hardness Tester Manual Loading Ideal for quick, reliable material testing of a variety of soft or hard metal parts. Features an adjustable dial indicator for easy zero setting, and a manual arm actuation that starts the hardness testing process. Environmentally friendly without power supply Starting from weight changing (election of full test force), all basic handling operations are performed manually No protrusion of the vertical axis (square screw) of the probe from the bottom of the device, due to new frame design. Mount for testing machine is flat and can therefore be used Easy operation The operation of gauge presetting is obsolete because an automatic dial gauge is applied INCLUDES: 1/16th Ball Indenter 60-65 RC Range Rockwell C Test Block 30-35 RC Range Rockwell C Test Block RB Block Tip Radius Measuring Force A.C.T. No. 178-561-02A 5µm 4mN 164965 2,125.00 $375.00 A.C.T. No. 963-210-10 262512 $4,500.00 $780.00 5

VALID FROM AUG. 17 - DEC. 31, 2015 Absolute Digimatic Height Gauges Smooth up/down displacement with the slider feed wheel; identical with that of proven double-column height gauges Built in ABS (Absolute) Encoder which eliminates the necessity of setting reference point at every power-on as well as over-speed error occurrences Measured data can be output to the small Digimatic Mini Processor printer (optional) or to a computer via input tool (optional) Comes complete with carbide-tipped scriber and scriber clamp INC (incremental) measurement function, Hold function, Output function and Low Battery alarm Digimatic Height Gages Series 192 Easy to use Standard type Carbide-tipped scriber Double column structure ensures high measuring accuracy Coarse/Fine feed switching No SPC data output Measuring Range Resolution A.C.T. No. 192-630-10 0-12.0005 /0.01mm 132139 $1,132.00 $283.00 192-632-10 0-24.0005 /0.01mm 166092 $1,972.80 $493.00 Measuring Range Resolution A.C.T. No. 570-312 0-12 (300mm).0005 (0.01mm) 187920 $576.80 $144.20 570-313 0-18 (0-450mm).0005 (0.01mm) 189974 $836.59 $175.41 570-314 0-24 (0-600mm).0005 (0.01mm) 189975 $1,052.80 $263.20 Linear Height Gage LH-600EG F.O.B. Mitutoyo Canada Granite Surface Plates Natural granite seasoned for thousands of years is free from deterioration or dimensional change over time. Granite surface plate has many advantages over cast iron surface plates: Twice as hard as cast iron. Minimal changes in dimension due to temperature changes. Free from wringing, so there is no interruption of work. Free from burrs or protrusions because of the fine grain structure and insignificant stickiness; this ensures high degree of flatness over a long service life and causes no damage to other parts or instruments. M3 Styli Kit for LH-600EG Includes steel styli: (Ø x L (mm)): 12.7x33, 4x31, 3x21, 2x21, 1x21, S-receiver, pin spanner, 10mm & 20mm steel extensions Model: K650986 A.C.T. No.: 280209 Price: $565.00 Equipped with Power Grip! Size Grade A.C.T. No. 517-803 12 x 18 x 4 A 109629 $245.60 $61.40 517-805 18 x 24 x 4 A 166780 $479.20 $119.80 517-814 36 x 48 x 6 A 163761 $1,917.60 $479.40 517-819 48 x 72 x 10 A 170569 $4,760.00 $1,190.00 Measuring Range Resolution A.C.T. No. 518-352A-21 0-38 (24 stroke) 0-972 mm (600 mm).000001 280208 Call for Price! 6

VALID FROM AUG. 17 - DEC. 31, 2015 Digital Readout (DRO) Mitutoyo s Linear Scale System tightly couples linear scale units with dedicated Digital Readout (DRO) units to offer accurate detection and display of axial displacement for machine tools and measuring equipment. The Linear Scale System can be configured to best meet your specific application, whether it be machining or measuring, just by choosing a suitable combination of scale unit and display unit. Scale units have many measuring length ranges and the display units feature remote zero setting, switchable resolution and multipurpose one-touch macro keys. The Linear Scale System has superior ease-of-use and is reliable, both of which are features that can dramatically improve machining accuracy and efficiency. Quill Kit BUILD YOUR OWN PACKAGE! The package consists of: One X Axis Scale (your choice) One Y Axis Scale (your choice) KA Counter (2 or 3 axis) Note: Bracket kits & mounting hardware is optional. Easy to read LCD with resolution of.0005 /0.01mm Push button controls for inch/mm, Zero-Set and On/Off Powered by a single SR-44 Battery which lasts about 1 year with normal use SPC Output for data transmission to Data Processors or a Remote Display Description A.C.T. No. 053906B Digimatic Quill Kit complete with brackets & scale for Bridgeport Type machines 239310 $264.00 $66.00 High performance, low cost 2 or 3 axis counter The KA counter has both mill and lathe functions, as well as standard functions Connectable with AT715 electromagnetic scales and AT100 series glass scales KA Counters No. of Axis A.C.T. No. 174-173A 1 or 2 180111 $479.20 $119.80 174-175A 3 177688 $594.40 $148.60 AT715 Series Scales Code-Length A.C.T. No. 539-801 AT715-4 /100 194775 $302.40 $75.60 539-802 AT715-6 /150 210609 $302.40 $75.60 539-803 AT715-8 /200 181217 $304.00 $76.00 539-804 AT715-10 /250 194119 $304.00 $76.00 539-805 AT715-12 /300 184151 $307.20 $76.80 539-806 AT715-14 /350 193574 $308.80 $77.20 539-807 AT715-16 /400 183638 $312.00 $78.00 539-808 AT715-18 /450 187084 $316.00 $79.00 539-809 AT715-20 /500 184148 $319.20 $79.80 539-811 AT715-24 /600 192148 $328.00 $82.00 539-813 AT715-28 /700 195311 $332.00 $83.00 539-814 AT715-30 /750 185033 $340.00 $85.00 539-815 AT715-32 /800 194698 $344.00 $86.00 539-816 T715-36 /900 184140 $366.40 $91.60 539-817 AT715-40 /1000 187083 $380.00 $95.00 539-818 AT715-44 /1100 210611 $396.00 $99.00 539-819 AT715-48 /1200 193790 $433.60 $108.40 539-820 AT715-52 /1300 210613 $459.20 $114.80 539-821 AT715-56 /1400 195310 $485.60 $121.40 539-822 AT715-60 /1500 189454 $514.40 $128.60 539-823 AT715-64 /1600 210614 $542.40 $135.60 539-824 AT715-68 /1700 196934 $577.60 $144.40 539-825 AT715-72 /1800 193500 $605.60 $151.40 539-860 AT715-80 /2000 260282 $763.20 $190.80 539-861 AT715-88 /2200 273534 $823.20 $205.80 539-862 AT715-96 /2400 539-862* $976.80 $244.20 539-864 AT715-104 /2600 539-864* $1,150.40 $287.60 539-865 AT715-112 /2800 539-865* $1,228.00 $307.00 539-866 AT715-120 /3000 254494 $1,280.00 $320.00 Brackets Details A.C.T. No. 64AAB196 291933 $203.20 $50.80 64AAB197 Milling Systems 274267 $207.20 $51.80 64AAB199 64AAB199* $33.60 $8.40 64AAB191 Lathes 263783 $245.60 $61.40 64AAB194 Grinders 64AAB194* $340.00 $85.00 64AAB200 All Systems 274166 $170.40 $42.60 *Manufacturer Part No. Shown 7

VALID FROM AUG. 17 - DEC. 31, 2015 Profile Projectors PH-3515F Erect image on day-bright screen 14 (356mm) diameter protractor screen with cross-hairs Digital angle measurement to 1 or 0.01 Floating-type work stage incorporates linear scales for fast, accurate measurement Surface illumination included Suitable for thread pitch measurements 10X magnification lens included PH-A14 Inverted image on the day bright screen 8 x 4 X, Y, measuring range 14 (356) diameter protractor screen with cross-hairs and staggered lines Heavy-duty workpiece table 10X magnification lens included 172-810-10A 172-868A Packages starting from $11,480 - Contact your nearest Branch for details. Packages starting from $6,770 - Contact your nearest Branch for details. Package Includes Package Includes M172868-1 PH-3515F with Surface Illumination, 2-Axis Counter w/tray M172810-4 PH-A14 with Surface Illumination, 2-Axis Counter w/tray M172868-2 PH-3515F with Surface Illumination, QM-Data 200 Arm Type M172810-5 PH-A14 with Surface Illumination, QM-Data 200 Arm Type M172868-3 PH-3515F with Surface Illumination, QM-Data 200 Arm Type, QM-Data OPT-200, QM Data Plate OPT-200 250-350mm Screen M172810-6 PH-A14 with Surface Illumination, QM-Data 200 Arm Type, QM-Data OPT-200, QM Data Plate OPT-200 250-350mm Screen All Packages F.O.B. Mississauga, ON. MDC-LITE Digimatic Micrometer MDC-Lite (with Ratchet Stop) is an economy version Digimatic. The world s lightest digital micrometer at.55 lbs (250g). Range Resolution Accuracy A.C.T. No. 293-831-30 0-1 (0-25.4mm).00005 (0.001mm) ±.0001 (±2μm) 215941 $131.00 $33.00 Coolant Proof Micrometers - Series 293 Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency. IP65 protection level, enabling use in environments exposed to cutting oil, etc. Range Resolution Accuracy A.C.T. No. 293-340-30 0-1in (0-25.4mm).00005 (0.001mm) ±.00005in 290856 $164.00 $41.00 293-341-30 1-2in (25.4-50.8mm).00005 (0.001mm) ±.00005in 215895 $221.00 $55.00 QUANTUMIKE Outside Micrometers Mitutoyo moves ahead again with the new QuantuMike. It s four times faster than conventional micrometers while boasting high accuracy and stability. Tests show you can reduce positioning time by 60% and save 35% in measuring time for higher throughput and productivity. While Quantities Last. Range Remarks Resolution Accuracy A.C.T. No. 293-180 0-1 With SPC Output.00005 (0.001mm) ±.00005 (1μm) 233099 $274.00 $69.00 293-185 0-1 No SPC Output.00005 ±.00005 231852 $214.00 $54.00 293-186 1-2 (0.001mm) (1μm) 232210 $252.80 $63.20 Burnaby Branch 4455 Alaska Street Burnaby, BC V5C 5T3 Tel: (604) 294-6271 Fax: (604) 294-8131 1(800) 667-1504 burnaby@actequipment.com Edmonton Branch 6786-75 th St. N.W. Edmonton, AB T6E 6T9 Tel: (780) 462-1777 Fax: (780) 461-5605 1(800) 661-5979 edmonton@actequipment.com www.actequipment.com Calgary Branch Bay 10, 7003-30 th St. S.E. Calgary, AB T2C 1N6 Tel: (403) 279-6016 Fax: (403) 279-5390 1(800) 685-8155 calgary@actequipment.com Saskatoon Branch Unit 112-4002 Arthur Rose Ave. Saskatoon, SK S7P 0C9 Tel: (306) 244-4810 Fax: (306) 244-4811 1(866) 234-0120 saskatoon@actequipment.com U-WAVE Compatible CONTACT A.C.T. FOR DETAILS Winnipeg Branch Unit 4-2065 Logan Ave. Winnipeg, MB R2R 0J1 Tel: (204) 783-3210 Fax: (204) 783-3224 1(877) 783-3201 winnipeg@actequipment.com Mitutoyo-s2015.indd 8