19 Stand Alone Cabinet with IP65 Rating www.apw.eu.com
Overview Material specification Frame: Steel 2.0 mm Panel mounting angles and reducing channels: Steel 2.0 mm Panel mount supports: Steel 1.5 mm Side / rear panels: Steel 1.5 mm Top cover: Steel 1.2 mm Doors: Steel 1.5 mm Glass: Tempered 4.0 mm UNI EN 12150-1 VERAK IP load capacity: 1.000 Kg Standards IEC 60297: DIN 41494: EN 60950: VDE 0100: Dimensions of mechanical structures of the 482.6 mm (19 ) series Basic specification for the 19 construction systems European safety standard for information technology equipment Installation and Set up of current systems and earthing Colour specification Standard VERAK IP RAL 7035 Cabinet frame, side panels, panel mount supports and 19 panel mounting angles RAL 7037 Top cover, front and rear doors ZINC PLATED Cabinet frame, panel mount supports and 19 panel mounting angles Dimensions Floor version Depth: 600-800 mm Width: 600-800 mm Protection 1 st number Definition 0 No protection 1 Protected against solids objects over 50 mm (e.g. accidental touch by hands) 2 Protected against solids objects over 12 mm (e.g. fingers) 3 Protected against solids objects over 2.5 mm (e.g. tools and wires) 4 Protected against solids objects over 1 mm (e.g. tools, wires and small l wires) 5 Protected against dust - limited entry (no harmful deposit) 6 Totally protected against dust 27U 37U 47U 2 nd number Definition 0 No protection 1 Protected against vertically falling drops of water 2 Protected against vertical direct sprays 3 Protected against vertical direct sprays up to 60 4 Protected against sprays from all directions - limited entry permitted 5 Protected against sprays 6 Protected against strong jets of water 7 Protected against the effects of temporary immersion 8 Protected against long periods of immersion under pressure
Introduction Introduction to VERAK IP VERAK IP is designed to meet the specific needs of the telecommunications, networking, industrial and electronic applications offering IP65 environmental protection. VERAK IP ensures maximum protection against the ingress of dust and water. VERAK IP is a stand alone cabinet extremely robust. The steel frame thickness of 2 mm gives the exceptional strength and rigidity, with a static load capacity of 1000 Kg. The knife-blades that interact with the sealing of the panels to ensure maximum IP sealing are an integral part of the vertical profiles. The doors, available in glass or metal option, are easily reversible (right or left opening) without interfering with the IP sealing. The unique design of the closing mechanism, which includes a seal wedge, ensures the integrity of sealing systems. A swing handle controls a 4-point locking system with central camshaft holding the proper pressure on the seals. The gasket is subjected to a minimum compression that preserves the performance of the sealing system over time, due the repeated opening of the doors. This feature is particularly useful in environments where the cabinet is opened and inspected regularly for routine maintenance. Optional rear 5U panels filtered or with forced ventilation, fitted above or below shortened rear door are designed to create an air flow inside the cabinet for dissipation of the heat generated by the installed equipment. In this case the IP protection rate is downgraded to IP 54. VERAK IP can also be provided with a pre-installed side or top air conditioning unit with dissipation power rate starting from 500W up to 6/7 KW. VERAK IP modern soft line design, slightly curved styling is equally at home in the office, the communications room or on the factory floor. Its two tone grey color scheme is neutral, blending with most modern decors, making VERAK IP the ideal choice for both heavy industrial, electronics and telecoms applications. 3 Key Features: VERAK IP IP65 certified, enhanced protection against dust and moisture Ideal for industrial and process control applications Exceptional strength allows a maximum static load capacity of 1.000 Kg Secure four point door locking system User friendly multiple entry access points 4 standard height options: 27U, 37U, and 47U 2 depth options: 600 mm and 800 mm 2 width options: 600 mm and 800 mm Steel or Glazed front door and removable side panels Choice of full length steel rear door or steel door + IP54 5U vent panel (top) + 5U fan panel (bottom) Standard front and rear adjustable 19 panel mounting angles Wide range of application specific accessories Supplied fully assembled and configured with accessories Castors with 65 Kg or 115 Kg load rate as optional Additional bay version settled for bayed cabinet Designed to mount the earth continuity kit compliant to EN 60950 norms VERAK IP Statement of Conformity www.apw.eu.com Tel: +39 011 7725024
Technical specifications Measurements in mm H CENTRE LINE FOR FEET & BOLT DOWN HOLES OPENING L F DIM WIDTH BETWEEN VERTICALS OPENING M D DIM RACK WIDTH J BOLT DOWN HOLES K FEET CENTRES E RACK DEPTH 97.9 467.0 G DIM WIDTH BETWEEN VERTICALS 4.2 STANDDARD TOP COVER 451.0 30.0 VENTED TOP COVER 465.3 A DIMENSION = B U HEIGHTS RACK WIDTH C DIMENSION = TOTAL RACK HEIGHT 20.0 GLAND PLATE OPENING 451.0 SIDE 59.7 FRONT Rack dimensions A B C D E F G H J K L M 27U x 600 x 600 1201.8 27 1311.8 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 27U x 600 x 800 1201.8 27 1311.8 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 27U x 800 x 600 1201.8 27 1311.8 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 563.8 27U x 800 x 800 1201.8 27 1311.8 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 563.8 37U x 600 x 600 1646.3 37 1756.3 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 37U x 600 x 800 1646.3 37 1756.3 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 37U x 800 x 600 1646.3 37 1756.3 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 563.8 37U x 800 x 800 1646.3 37 1756.3 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 563.8 x 600 x 600 1868.5 42 1978.5 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 x 600 x 800 1868.5 42 1978.5 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 x 800 x 600 1868.5 42 1978.5 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 563.8 x 800 x 800 1868.5 42 1978.5 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 563.8 47U x 600 x 600 2090.8 47 2205.0 597.6 678.0 490.0 440.0 558.0 380.0 450.0 393.4 363.8 47U x 600 x 800 2090.8 47 2205.0 597.6 878.0 490.0 640.0 758.0 380.0 450.0 593.4 363.8 47U x 800 x 600 2090.8 47 2205.0 797.6 678.0 690.0 440.0 558.0 580.0 650.0 393.4 363.8 47U x 800 x 800 2090.8 47 2205.0 797.6 878.0 690.0 640.0 758.0 580.0 650.0 593.4 363.8
Primary Configuration Ready to use Primary cabinet builds The VERAK Primary is a ready to use configured cabinet, one order code gives you a complete Primary enclosure ideal for housing active equipment, electronics and computer servers. It can also be used as a starting base in order to create your own unique configured enclosure by adding additional accessories. 5 Contents of kit Qty Corners verticals 4 End frames 2 19 panel mountin angles 4 Reducing cable channels (only 800 mm wide) 4 Panel mount support kit of 2 2 / 3 Side panels 2 Top cover 1 Bottom gland plate 1 Front door, metal or glass 1 Rear metal door 1 Set of adjustable feet 1 VERAK IP PRIMARY RACK BUILD 600 mm width with full height rear door or with forced ventilation (5U panel and reduced door) VERAK PRIMARY RACK BUILD 800 mm width with full height rear door or with forced ventilation (5U panel and reduced door) www.apw.eu.com Tel: +39 011 7725024
Doors VERAK IP65 - Glass front door Height 27U 37U 37U Full length metal rear door Full length metal rear door Full length metal rear door Full length metal rear door Full length metal rear door Full length metal rear door Full length metal rear door W x D (mm) 600 x 600 VT588-790300 600 x 600 VT588-790301 600 x 800 VT588-790302 600 x 600 VT588-790303 600 x 800 VT588-790304 800 x 600 VT588-790305 800 x 800 VT588-790306 VERAK IP54 - Glass front door Height 27U 37U 37U Short door + forced ventilation Short door + forced ventilation Short door + forced ventilation Short door + forced ventilation Short door + forced ventilation Short door + forced ventilation Short door + forced ventilation W x D (mm) 600 x 600 VT588-790400 600 x 600 VT588-790401 600 x 800 VT588-790402 600 x 600 VT588-790403 600 x 800 VT588-790404 800 x 600 VT588-790405 800 x 800 VT588-790406 VERAK IP - 800 mm wide x 1000 mm depth produced as per customer requirement Note: For forced ventilated option a fan cables must be ordered separately VERAK IP - 17U special esecution
Structural elements Frame The frame comprises of 4 verticals and 2 end frames. Glazed door Framed door with 4 mm temperated glass, swing handle with a 4-point locking system. The options of the keyed alike lock, manual or automatic, has to be ordered separately. 7 Bottom plates To guarantee the IP protection bottom gland pla te must be fitted. This gland plate which can be fitted at the bottom of the rack can also be utilized as a cable entry panel. Metal doors 1.5 mm steel door is complete with swing handle which controls a 4-point locking system. The required lock manual/automatic or blank lock needs to be ordered separately. 5U ventilation panels With IP filter or fan plus filter, allows to create a forced air flow inside the cabinet. Usage of these panels decreases the IP performance to IP54. Side panels Side panels are sold in pairs and are 1.5 mm steel painted in RAL7035. The side panels are fitted using captive screws which allow the units to easily be fitted or removed. Baying bracket kit The kit consists of the IP gasket and 6 baying brackets. For example: If three racks are to be bayed together to make one suite of racks, one pair of side panels are required (to be used on either end of the suite) and two baying bracket kits. Plain IP65 top IP 65 unvented top cover. Lifting eyes Lifting eyes are sold as a kit of 4. Each has a load capacity up to 320 Kg. Swing handles Both the metal and glass doors have a swing handle fitted as stan dard. Please note, the locks for the swing handle need to be ordered separately. Keyed alike lock - self locking All locks supplied operate with the same key and the door automatically locks when closed. Keyed alike lock - manual locking All locks supplied operate with the same key. To lock the door the key must be turned. Lock blank The lock blank fills the hole in the swing handle when a lock is not required. It also acts as a spring clip holding the handle into its housing. Frame 5U ventilation panel plus shortened metal door Metal door Glazed door Top / bottom plates Top cover www.apw.eu.com Tel: +39 011 7725024
Ordering information (some examples) VERAK VERAK VERAK VERAK VERAK VERAK VERAK IP65 IP65 IP65 IP65 IP65 IP65 IP65 Height U 27 37 37 42 42 42 42 W x D 600x600 600x600 600x800 600x600 600x800 800x600 800x800 Main structure Frame VT585-565025 VT585-565041 VT585-565042 VT585-565049 VT585-565050 VT585-565053 VT585-565054 For the top of the rack Plain IP65 top VT567-565635 VT567-565635 VT567-565636 VT567-565635 VT567-565636 VT567-565639 VT567-565640 Doors w/swing handle with blank cover Glazed door VT567-565605 VT567-565607 VT567-565607 VT567-565608 VT567-565608 VT567-565616 VT567-565616 Steel door VT567-565541 VT567-565543 VT567-565543 VT567-565544 VT567-565544 VT567-565552 VT567-565552 For the sides Side panels VT567-565244 VT567-565252 VT567-565253 VT567-565256 VT567-565257 VT567-565256 VT567-565257 IP baying kit on request on request VT567-565366 VT567-565369 VT567-565370 VT567-565369 VT567-565370 For the bottom of the rack Bottom gland plate VT567-565320 VT567-565320 VT567-565321 VT567-565320 VT567-565321 VT567-565324 VT567-565325 Adjustable feet VT567-565343 VT567-565343 VT567-565343 VT567-565343 VT567-565343 VT567-565343 VT567-565343 Heavy duty castors VT567-565408 VT567-565408 VT567-565408 VT567-565408 VT567-565408 VT567-565408 VT567-565408 Lifting eyes VT567-565489 VT567-565489 VT567-565489 VT567-565489 VT567-565489 VT567-565489 VT567-565489 VERAK IP54 - Standard version with glass door VERAK IP54 - Standard version with steel door
Handles & locks VERAK handles and locking systems The Primary configurations provide swing handle with manual locking. They are optionally available versions with or without lock. Please order the selected key lock separately 9 Swing handle Swing handle Swing handle with numeric combination lock VT802-563495 VA554-546642 Standard solution - Swing handle with manual locking Lock Keyed alike lock - manual locking (2 keys) Keyed alike lock - self locking (2 keys) Blank cover VA802-563610 VA802-563532 VA802-563534 Swing handle with blank cover Swing handle with automatic locking Swing handle with numeric combination lock www.apw.eu.com Tel: +39 011 7725024
Accessories Thermal kit IP54 5U ventilation panel kit, 600 mm, 3 filters only 5U ventilation panel kit, 800 mm, 4 filters only 5U ventilation panel kit, 3 fan unit, 600 mm, filters 5U ventilation panel kit, 4 fan unit, 800 mm, filters VT567-565522 VT567-565523 VT567-565526 VT567-565527 Note: for purchase of ventilation unit, contact sales representative Thermostat and wiring kit Thermostat and wiring kit VK385-775843 Fixed shelves kit Thermal kit IP54 19 fixed shelf (600 mm) x 256 VT802-561013 19 fixed shelf (600 mm) x 356 VT802-561014 19 fixed shelf (600 mm) x 456 VT802-561015 19 fixed shelf (600 mm) x 556 VT802-561016 19 fixed shelf max 800 x 256 VT802-561017 19 fixed shelf max 800 x 356 VT802-561018 19 fixed shelf max 800 x 456 VT802-561019 19 fixed shelf max 800 x 556 VT802-561020 Chassis supports Light grey RAL 7035 Zinc plated conductive Chassis support 270 mm in cabinet 400 mm depth min. VT802-561009 VT802-343304 Chassis support 370 mm in cabinet 500 mm depth min. VT802-561561 VT802-343305 Chassis support 470 mm in cabinet 600 mm depth min. VT802-561010 VT802-343306 Chassis support 570 mm in cabinet 700 mm depth min. VT802-561562 VT802-343307 Chassis support 670 mm in cabinet 800 mm depth min. VT802-561011 VT802-343308 Chassis support 770 mm VT802-343186 VT802-343309 Chassis support 870 mm VT802-343187 VT802-343310 Thermostat and wiring kit 19 Cantilever shelves 19 cantilever shelf (255 mm deep) VT802-562284 19 cantilever shelf (400 mm deep) VT802-562285 Fixed shelves kit Chassis supports 19 cantilever shelves
Accessories Keyboard shelves 19 x 400 mm keyboard shelf VT802-3635758 11 19 Sliding drawing kit 19 2U sliding drawing kit RAL 7035 VT390-787964 Heavy duty sliding shelves 19 x 630 mm heavy duty sliding shelves VT802-3635737 Keyboard shelf 19 Din bar panel kit 19 Din bar panel kit VT390-787140-B Plinth Plinth Vented plinth 19 Slideing drawing kit 600 x 600 / 600 x 800 rear / front panels VT802-561038 VT806-600649 800 x 600 / 800 x 800 rear / front panels VT802-561039 VT806-601221 600 x 600 / 800 x 600 side panels VT802-561035 VT806-601222 600 x 800 / 800 x 800 side panels VT802-561036 VT806-600650 4 corners kit VT567-565504 Heavy duty sliding shelves Plinth 19 Din bar panel kit www.apw.eu.com Tel: +39 011 7725024
Accessories Castors kit Heavy duty castors kit unbraked Heavy duty braked / unbraked castors kit VT567-565408 VT567-565409 Lifting eyes kit Lifting eyes kit VT567-565489 Castors kit Document holder Document holder A4 size VT802-553081 Earth continuity Earth continuity kit Earth continuity kit - supplied assembled VT802-560005 VT567-565900 Lifting eyes kit Gland plate with guillotine cable entry Gland plate 800x800 with guillotine cable entry Gland plate 800x1000 with double guillotine cable entry VT554-546144 VT554-545358 Document holder Gland plate 800x800 with guillotine cable entry Gland plate 800x1000 with double guillotine cable entry
Power Distribution Unit Power Distribution Unit 1U 19 rackmount multistandard aluminum PDU 13 N. sockets A Protection Cable & Plug 6 16A -- 2 mt + Schuko C06ALMST-SI2S 6 16A illuminated switch 2 mt + Schuko C06ALMST-IL2S 7 16A MGT 2P+N 2 mt + Schuko C07ALMST-MT2S 8 16A -- 2 mt + Schuko C08ALMST-SI2S 8 16A illuminated switch 2 mt + Schuko C08ALMST-IL2S Multistandard aluminum PDU 1U 19 rackmount multistandard steel PDU N. sockets A Protection Cable & Plug 6 16A -- 2 mt + Schuko K06MET-SI2S 6 16A illuminated switch 2 mt + Schuko K06MET-IL2S 6 16A MGT 2P+N 2 mt + Schuko K06MET-MT2S 8 16A -- 2 mt + Schuko K08MET-SI2S 8 16A illuminated switch 2 mt + Schuko K08MET-IL2S 9 16A MGT 2P+N 2 mt + Schuko K09MET-MT2S Multistandard steel PDU Multistandard aluminum vertical PDU N. sockets A Protection Cable & Plug 12 16A MGT 2P+N 2 mt + Schuko C12ALMST-MT2S 12 16A illuminated switch 2 mt + Schuko C12ALMST-IL2S 16 16A illuminated switch 2 mt + Schuko C16ALMST-IL2S 16 16A MGT 2P+N 2 mt + Schuko C16ALMST-MT2S Multistandard aluminum vertical PDU 1U 19 rackmount IEC C13 steel PDU N. sockets A Protection Cable & Plug 8 16A illuminated switch 2 mt + Schuko C08MET-16AC13IECIL2S 8 16A MGT 2P+N 2 mt + Schuko C08MET-16AC13IECMT2S 12 16A illuminated switch 2 mt + Schuko C12MET-16AC13IECIL2S 16 16A -- 3 mt + IEC 60309 K16MET-16AC13IECIND3MT 16 32A -- 3 mt + IEC 60309 K16MET-32AC13IECIND3MT IEC C13 8/12 sockets steel PDU IEC C13 16 sockets steel PDU www.apw.eu.com Tel: +39 011 7725024
GOMA ELETTRONICA SpA 10146 Torino - Italy Via Carlo Capelli, 89 Tel: +39 011 7725024 Fax: +39 011 712298 www.gomaelettronica.it All trademarks are the property of their respective owners GOMA ELETTRONICA SpA MKA-CTG-EN 0517