1 1 22.88 115 0 Plug & Play 0 Plug & Play Universal Trunks Plug & Play Universal Systems MTP Trunks provide the backbone of the Plug & Play System. With non - pinned MTPs on both ends of the cable, these trunks are desgned to interface with the Plug & Play Universal modules. All trunks are shipped with strain -relief clips that alllow for the tool -less installation into both Pretium EDGE and Plug & Play housings. These trunks conform to TIA -568 Type -B polarity. Features and Benefits Factory-terminated solutions Provide consistent quality, ensure system performance and reduce installation time Universal-wired modular system components Enable moves, adds and changes without polarity concerns; provide a simple migration path between 2-fiber and parallel optics applications Low insertion loss performance Allows for more connections in a link when deploying a TIA-942-compliant system Corning ClearCurve 50 μm Optical Fiber Offers enhanced bend performance, allowing tighter cable routing without negatively impacting system performance 100G Ready performance Ensures product will meet the requirements of 100G Ethernet applications Maximum skew of 0.75 ns Product is assured to work in parallel optic applications for Ethernet, Fibre Channel and InfiniBand Protective pulling grip Protects one end of the assembly during installation Standards Design and Test Criteria NFPA 262 (for plenum, riser and general building applications) Approval and Listings National Electrical Code (NEC ) OFNP, CSA FT-6 Page 1 Revision date 2013-08-29
Specifications General Specifications Application Data Center LAN/SAN Cable Assembly Type Plug & Play Trunk Cable Type Indoor; ANSI/ICEA S-83-596 Number of Pulling Grips 1 Fiber Category Single-mode (OS2) Flame Rating Plenum (OFNP) Temperature Range Operation -10 C to 60 C (14 F to 140 F) Design - Connector A Connector Type Ferrule MTP (non-pinned) Composite Optical Specifications - Connector A Reflectance, Typical Insertion Loss, Max. < -55 db 0.75 db Design - Connector B Connector Type Ferrule MTP (non-pinned) Composite Optical Specifications - Connector B Reflectance, Typical Insertion Loss, Max. < -55 db 0.75 db Page 2 Revision date 2013-08-29
Cable Design Fiber Count 24 Outer Jacket Color Polarity Universal; TIA-568 Type-B Mechanical Characteristics Cable Nominal Outer Diameter Min. Bend Radius Installation Min. Bend Radius Operation Max. Tensile Strength for Installation Weight 7.7 mm ± 0.3 mm (0.30 in (± 0.01 in)) 115.5 mm (4.6 in) 38.5 mm (1.5 in) 660 N 50 kg/km (34 lb/1000 ft) Optical Characteristics (cabled) Fiber Compliance ITU-T G.652.D and ITU-T G.657.A1 Wavelengths 1310 nm / 1550 nm Maximum Attenuation 0.4 db/km / 0.3 db/km Serial 1 Gigabit Ethernet 5000 m / - / - Serial 10 Gigabit Ethernet 10000 m / - / 40000 m Induced Attenuation @ 10 mm Radius 0.5 db (1 turn; 10 mm radius; 1550 nm) Furcation - Connector A Leg Length Leg Color Leg Diameter Furcation Type - A 610 mm [Shortest Leg = (+76 mm/-0 mm), Others Vary] (24 in [Shortest Leg = (+3 in/-0 in), Others Vary]) 2.0 mm Heat-shrink for U-Clip Furcation - Connector B Leg Length Leg Color Leg Diameter Furcation Type - B 610 mm [Shortest Leg = (+76 mm/-0 mm), Others Vary] (24 in [Shortest Leg = (+3 in/-0 in), Others Vary]) 2.0 mm Heat-shrink for U-Clip Page 3 Revision date 2013-08-29
Pulling Grip - Connector A Pulling Grip - Connector A Pulling Grip Outer Diameter Min. Duct Size Diameter Tensile Strength Yes 26 mm (1.0 in) 38.1 mm (1.5 in) 1320 N (300 lb) Pulling Grip - Connector B Pulling Grip - Connector B No Chemical Characteristics RoHS Free of hazardous substances according to RoHS 2002/95/ EG Fiber Specifications Optical Characteristics (cabled) Fiber Type Single-Mode Ultra-Bendable Fiber Fiber Core Diameter 8.2 µm Fiber Category OS2 Fiber Compliance ITU-T G.652.D and ITU-T G.657.A1 Fiber Code G Wavelengths 1310 nm / 1383 nm / 1550 nm Maximum Attenuation 0.4 db/km / 0.4 db/km / 0.3 db/km Serial 1 Gigabit Ethernet 5000 m / - / - Serial 10 Gigabit Ethernet 10000 m / - / 40000 m Induced Attenuation @ 10 mm Radius 0.5 db (1 turn; 10 mm radius; 1550 nm) * ITU-T G.652 D compliant. * Meets 0.75 ns optical skew when used in all Corning Cable Systems Plug & Play /Pretium EDGE Systems Solutions. Note: 1) Improved attenuation and bandwidth options available. 2) Bend-insensitive single-mode fibers available on request. 3) Contact a Corning Cable Systems Customer Care Representative for additional information. Page 4 Revision date 2013-08-29
Ordering Information Part Number Product Description Length Weight A909024GPNAAU100F Plug & Play Universal Std-Loss MTP Trunk, Single-mode (OS2), MTP (non-pinned) to MTP (non-pinned), 24 F, 24-in legs on both ends, pulling grip one side, 100 ft 100 ft (+7.5 ft/-0 ft) (30 m (+2.29 m/-0 m)) 110 lb/1000 ft (50 kg/km) Shipping Information Units per Delivery 1/1 Corning Cable Systems LLC PO Box 489 Hickory, NC 28603-0489 USA 800-743-2675 FAX: 828-325-5060 International: +1-828-901-5000 www.corning.com/cablesystems A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks. Corning Cable Systems is ISO 9001 certified. 2013 Corning Cable Systems. All rights reserved. Page 5 Revision date 2013-08-29