Electrical Interconnections. Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2012/2 1/2/5

Electrical Interconnections Supplementary Catalog to Full Line Catalogs, Volumes /2/ Edition 202/2 /2/

The new items in this catalog supplement products found in the following main catalogs /2/ Volume WINSTA - The Pluggable Connection System Volume 2 Connectors and PCB Terminal Blocks Volume Rail-Mounted Terminal Block Systems

CONTENTS Rail-Mounted Terminal Block Systems Volume 02 2 Connectors and PCB Terminal Blocks Volume 2 26 43 Item Numbers 44 4

Volume

CONTENTS Volume TOPJOB @ Double-Deck Terminal Blocks mm² 2000 Series 04 0 Shield Terminal Blocks 6 mm² 2006 Series 06 0 mm² 200 Series 06 6 mm² 206 Series 06 Volume TOPJOB @ Pluggable Diode Modules on Carrier Terminal Blocks 2. mm² 2002 Series 07 TOPJOB @ Multilevel Installation Terminal Blocks 2. mm² 2003 Series 08 TOPJOB @ Double-Deck Terminal Blocks 2. mm² 2002 Series 0 TOPJOB @ Double-Deck Disconnect Terminal Blocks and Double-Deck Carrier Terminal Blocks 2. mm² 2002 Series 2 TOPJOB @ Double-Deck Fuse Disconnect Terminal Blocks 2. mm² 2002 Series 3 TOPJOB @ Disconnect Terminal Blocks for Test and Measurement, Through and Ground Terminal Blocks for Current and Voltage Transformer Circuits 6 mm² 2007 Series 4 TOPJOB @ Disconnect Terminal Blocks for Test and Measurement, Through and Carrier Terminal Blocks 6 mm² 2006 Series 6 Disconnect Plug for Carrier Terminal Blocks 2006 Series 7 Fuse Terminal Blocks for Cylindrical Fuses 8 Series 8 Voltage Tap 283 Series 9 Pol Pol X-COM @-SYSTEM-MINI Pre-Assembled Female Plugs mm² 2020 Series 22 23 X-COM @-SYSTEM Male Headers with Solder Pins and Rivet Fixing Flanges, Pin Spacing mm 769 Series 20 Vario-T-BOXX and Variobox 887 Series 24

4 Volume TOPJOB @ Double-Deck Terminal Blocks (.) mm² 2000 Series 0.4 - (.) mm² AWG 24-6 0 V/6 kv/3 2 I N 3. A (6 A) Terminal block width 3. mm / 0.38 in L 9 - mm / 0.39 in 3! 69,7 mm/2.74 in,7 mm/2.04 in 6,8 mm/2.43 in Conductor sizes: 0.4 mm². mm² s + f-st ; Push-in conductor sizes: 0. mm². mm² s and 0. mm² 0.7 mm² insulated ferrule, 0 mm 2 0 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. Ground conductor/through terminal block, with marker carrier, gray housing Shield/N 2000-2248 Shield/L 2000-228 2000 Series Accessories Appropriate marking systems: WMB/Marking strips (see Section 3) End and intermediate plate, 0.7 mm thick Test plug adapter, orange 2000-2292 2 for 4 mm Ø test plug gray 2000-229 2 gray 2009-74 Ground conductor/through terminal block, without marker carrier, gray housing Shield/N 2000-228 Shield/L 2000-2228 Push-in type jumper bar, insulated, I N 4 A, light gray 2-way 3-way 4-way -way 6-way 7-way 8-way 9-way 0-way Push-in type jumper bar, insulated, I N 4 A, light gray from to 3 from to 4 from to from to 6 from to 7 from to 8 from to 9 from to 0 2000-402 2000-403 2000-404 2000-40 2000-406 2000-407 2000-408 2000-409 2000-40 2000-433 2000-434 2000-43 2000-436 2000-437 2000-438 2000-439 2000-440 Banana plug, Testing tap, Test plug, Test plug, for socket 4 mm Ø, color mixed 2- for max. 2. mm² gray 2009-82 with 0 mm cable, 2 mm Ø red 20-36 with 0 mm cable, 2.3 mm Ø yellow 20-37 Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow 2000- Double-deck marker carrier, pivoting gray 2000-2 (2x2) WMB Multi marking system, 0 strips with 0 markers per card, for 3. mm terminal block width plain 793-3 Marking strip, plain, mm wide, m roll white 2009-0

TOPJOB @ Double-Deck Terminal Blocks (.) mm² 2000 Series 0.4 - (.) mm² AWG 24-6 800 V/8 kv/3 2 I N 3. A (6 A) Terminal block width 4.2 mm / 0.6 in L 9 - mm / 0.39 in 3! Volume 69,7 mm/2.74 in,7 mm/2.04 in 6,8 mm/2.43 in Conductor sizes: 0.4 mm². mm² s + f-st ; Push-in conductor sizes: 0. mm². mm² s and 0. mm² 0.7 mm² insulated ferrule, 0 mm 2 800 V = rated voltage 8 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. Ground conductor/through terminal block, with end plate, with marker carrier, gray housing Shield/N 2000-2248/099-000 Shield/L 2000-228/099-000 2000 Series Accessories Appropriate marking systems: WMB/Marking strips (see Section 3) End and intermediate plate, 0.7 mm thick Test plug adapter, orange 2000-2292 2 for 4 mm Ø test plug gray 2000-229 2 gray 2009-74 Ground conductor/through terminal block, with end plate, without marker carrier, gray housing Shield/N 2000-228/099-000 Shield/L 2000-2228/099-000 Push-in type jumper bar, insulated, I N 8 A, light gray 2-way 3-way 4-way -way 6-way 7-way 8-way 9-way 0-way Push-in type jumper bar, insulated, I N 8 A, light gray from to 3 from to 4 from to from to 6 from to 7 from to 8 from to 9 from to 0 200-402 200-403 200-404 200-40 200-406 200-407 200-408 200-409 200-40 200-433 200-434 200-43 200-436 200-437 200-438 200-439 200-440 Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow 200- Double-deck marker carrier, pivoting gray 2000-2 Marking strip, plain, mm wide, m roll white 2009-0 (2x2) Testing tap, for max. 2. mm² gray 2009-82 Banana plug, for socket 4 mm Ø, color mixed 2- Test plug, with 0 mm cable, 2 mm Ø red 20-36 Test plug, with 0 mm cable, 2.3 mm Ø yellow 20-37 WMB Inline, plain, stretchable 4-4.2 mm, 2,000 WMB markers, 4 mm, on roll white 2009-4 WMB Multi marking system, 0 strips with 0 markers per card, stretchable 4-4.2 mm plain 793-4 WMB Multi marking system, plain, 0 strips with 0 markers per card, stretchable 4-4.2 mm yellow 793-4/000-002 red 793-4/000-00 blue 793-4/000-006 gray 793-4/000-007 orange 793-4/000-02 light green 793-4/000-07 green 793-4/000-023 violet 793-4/000-024

6 32,9 mm/.3 in 36,9 mm/.4 in 36,9 mm/.4 in Volume TOPJOB @ Shield Terminal Blocks 6 (0) mm², 0 (6) mm² and 6 (2 f ) mm² 2006/200/206 Series 0. - 6 (0) mm² AWG 20-8 0. - 0 (6) mm² AWG 20-6 0. - 6 (2 f ) mm² AWG 20-4 2 3 Terminal block width 7. mm / 0.29 in Terminal block width 0 mm / 0.394 in Terminal block width 2 mm / 0.472 in L 3 - mm / 0. in L 7-9 mm / 0.7 in L 8-20 mm / 0.7 in 24,8 mm/0.98 in 7,4 mm/2.26 in 30,8 mm/.2 in 67,8 mm/2.67 in 32,3 mm/.27 in 69,8 mm/2.7 in 2-conductor shield terminal block 2-conductor shield terminal block 2-conductor shield terminal block, mm-high DIN 3 rails shall be used for a current load higher than 76A! white 4 2006-208 4 white 4 200-208 4 2 white 4 206-208 4 20

Conductor sizes: 0. mm² 0 mm² s + f-st ; Push-in conductor sizes: mm² 0 mm² s and. mm² 6 mm² insulated ferrule, 2 mm 2 Conductor sizes: 0. mm² 6 mm² s + f-st ; Push-in conductor sizes: 2. mm² 6 mm² s and 2. mm² 0 mm² insulated ferrule, 8 mm 3 Conductor sizes: 0. mm² 6 mm² s + f-st, 2 mm² f-st ; Push-in conductor sizes: 2. mm² 6 mm² s and 2. mm² 6 mm² insulated ferrule, 8 mm 4 Suitable for Ex e II applications Strip length, see packaging or instructions. Diode module with N4007 diode U N 2 V, U RM 000 V I N A Plug width.2 mm / 0.20 in! TOPJOB @ Pluggable Diode Modules on Carrier Terminal Blocks 2. (4) mm², 2002 Series Length of 2002-66: 66. mm / 2.62 in 2-conductor carrier terminal block 2 Length of 2002-86: 87. mm / 3.4 in 4-conductor carrier terminal block 3 Length of 2002-96: 72.9 mm / 2.87 in 2-conductor carrier terminal block with additional jumper position 4 See application notes in Full Line Catalog, Volume, for: Colored push-in type jumper bars, page 39 Staggered jumper, page 4 Push-in type wire jumper, page 40 7 Volume Accessories Diode module, with N4007 diode, max. operating temperature: 8 C,.2 mm wide gray 2002-800/000-40 00 Carrier Term. Blocks and Accessories Appropriate marking system: WMB/Marking strips 2-conductor carrier terminal block, 0.2-2. (4) mm² / AWG 22-2 Terminal block width.2 mm / 0.20 in gray 2002-66 End and intermediate plate, mm thick orange 2002-692 gray 2002-69 4-conductor carrier terminal block, 2 0.2-2. (4) mm² / AWG 22-2 Terminal block width.2 mm / 0.20 in gray 2002-86 End and intermediate plate, mm thick orange 2002-892 gray 2002-89 Push-in type wire jumper, 4 insulated, I N 6 A, wire size. mm² L = 60 mm 2009-42 00 (0x0) L = 0 mm 2009-44 00 (0x0) L = 2 mm 2009-46 00 (0x0) Push-in type jumper bar, insulated, 4 I N 2 A, light gray 2-way 2002-402 3-way 2002-403 4-way 2002-404 -way 2002-40 6-way 2002-406 7-way 2002-407 8-way 2002-408 9-way 2002-409 0-way 2002-40 Push-in type jumper bar, insulated, I N 2 A, light gray from to 3 2002-433 from to 4 2002-434 from to 2002-43 from to 6 2002-436 from to 7 2002-437 from to 8 2002-438 from to 9 2002-439 from to 0 2002-440 2-conductor carrier terminal block, 3 0.2-2. (4) mm² / AWG 22-2 Terminal block width.2 mm / 0.20 in gray 2002-96 End and intermediate plate, mm thick orange 2002-992 gray 2002-99 Insulation stop, pcs/strip, 0.2-0. mm² light gray 2002-7 Insulation stop, pcs/strip, 0.7 - mm² dark gray 2002-72 Staggered jumper, 4 insulated, I N 2 A, light gray 2-way 3-way 4-way -way 6-way 7-way 8-way 9-way 0-way -way 2-way 2002-472 2002-473 2002-474 2002-47 2002-476 2002-477 2002-478 2002-479 2002-480 2002-48 2002-482 (2x2) (2x2) (2x2) (2x2) (2x2) (2x2) (2x2) (2x2)

8 44,3 mm/.74 in 44,3 mm/.74 in 6,7 mm/2.32 in 0 mm/4.33 in 6,7 mm/2.32 in 0 mm/4.33 in 6,7 mm/2.32 in 0 mm/4.33 in 44,3 mm/.74 in 44,3 mm/.74 in 6,7 mm/2.32 in 44,3 mm/.74 in Volume TOPJOB @ Multilevel Installation Terminal Blocks 2. (4) mm² 2003 Series 0.2-2. (4) mm² AWG 22-2 2 V/4 kv/3; 20 A (2 A) 2 3 400 V/6 kv/3; 20 A (2 A) 2 4 Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 0.2-2. (4) mm² AWG 22-2 400 V/6 kv/3 2 I N 24 A (28 A) Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 0.2-2. (4) mm² AWG 22-2 2 V/4 kv/3; 24 A (28 A) 2 3 400 V/6 kv/3; 24 A (28 A) 2 4 Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in Multilevel installation terminal block, with movable knife disconnect, gray NT/L/PE 2003-664 LT/L/PE 2003-6644 Item-Specific Accessories Test plug adapter N/L, for vertical test slot, gray 2-pole 2003-499 00 (4x2) Multilevel installation terminal block, gray L/L 2003-6642 N/L 2003-6649 Multilevel installation terminal block, gray N/L/PE 2003-6646 L/L/PE 2003-664 Test plug adapter N, for vertical test slot, gray -pole 2003-0 00 (4x2) 6,7 mm/2.32 in 0 mm/4.33 in 6,7 mm/2.32 in 0 mm/4.33 in Multilevel installation terminal block, carrier terminal block without knife disconnect, gray Maximum current depends on accessories used. Multilevel installation terminal block, gray N/L/PE 2003-6640 L 2003-66 N 2003-66 Black upper-deck, brown middle-deck, green-yellow lower-deck printing 2003-6643 Item-Specific Accessories Test plug adapter N/L, for vertical test slot, gray 2-pole 2003-499 00 (4x2) Test plug adapter N, for vertical test slot, gray -pole 2003-0 00 (4x2)

Accessories for Multilevel Installation Terminal Blocks! 9 Volume Multilevel installation terminal block (2003-6640) with N/L test plug adapter (2003-499) for insulation resistance measurement with connected N and L potentials Multilevel installation terminal block (2003-6640) with N test plug adapter (2003-0) for insulation resistance measurement of N potential Conductor sizes: 0.2 mm² 4 mm² s + f-st ; Push-in conductor sizes: 0.7 mm² 4 mm² s and 0.7 mm² 2. mm² insulated ferrules, 2 mm 2 2 V/ 400 V = rated voltage 4 kv/ 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 2 V/4 kv potential-ground 4 400 V/6 kv potential-potential Strip length, see packaging or instructions. Accessories Multilevel Installation Terminal Block Push-in type jumper bars and staggered jumpers, see 2002 Series End and intermediate plate, Insulation stop, 0.8 mm thick pcs/strip, orange 2003-6692 0.2-0. mm² light gray 2002-7 Adjacent jumper for continuous commoning, insulated, Insulation stop, I N 2 A, light gray pcs/strip, 0.7 - mm² 2-way 2002-400 dark gray 2002-72 Busbar carrier, Staggered jumper, not suitable as end stop, for DIN 3 rail,. mm thick insulated, I N 2 A, light gray blue 2009-304 2-way 2002-472 3-way 2002-473 Busbar carrier, 4-way 2002-474 can replace end bracket, with detachable -way 2002-47 (2x2) separator plate, 6-way 2002-476 (2x2) for DIN 3 rail, 2 7-way 2002-477 (2x2) 7. mm thick 8-way 2002-478 (2x2) blue 2009-30 9-way 2002-479 (2x2) Push-in type jumper bar, insulated, 0-way 2002-480 (2x2) I N 2 A, -way 2002-48 (2x2) light gray 2-way 2002-482 (2x2) 2-way 2002-402 3-way 2002-403 Push-in type wire jumper, 4-way 2002-404 insulated, -way 2002-40 I N 6 A, 6-way 2002-406 wire size. mm² 7-way 2002-407 L = 60 mm 2009-42 00 (0x0) 8-way 2002-408 L = 0 mm 2009-44 00 (0x0) 9-way 2002-409 L = 2 mm 2009-46 00 (0x0) 0-way 2002-40 Push-in type jumper bar, insulated, I N 2 A, light gray WMB Multi marking system, 0 strips with 0 markers per card, stretchable -.2 mm from to 3 2002-433 plain 793- from to 4 2002-434 WMB Inline, plain, from to 2002-43 stretchable -.2 mm, from to 6 2002-436,0 WMB markers, mm, on roll from to 7 2002-437 white 2009- from to 8 2002-438 Marking strip, plain, from to 9 2002-439 mm wide, from to 0 2002-440 m roll Operating tool, 3. mm and 2. mm blade, for TOPJOB S installation terminal blocks 2009-309 white 2009-0 Operating tool, 3. mm and. mm blade, for TOPJOB S installation terminal blocks 2009-30 Multilevel installation terminal block (2003-664) with N/L test plug adapter (2003-499) for insulation resistance measurement with connected N and L potentials Multilevel installation terminal block (2003-664) with N test plug adapter (2003-0) for insulation resistance measurement of N potential

0,7 mm/2.04 in,7 mm/2.04 in,7 mm/2.04 in 93 mm/3.66 in 93 mm/3.66 in 93 mm/3.66 in,7 mm/2.04 in,7 mm/2.04 in,7 mm/2.04 in Volume TOPJOB @ Double-Deck Terminal Blocks 2. (4) mm² 2002 Series 0.2-2. (4) mm² AWG 22-2 0 V/6 kv/3 2 I N 24 A (28 A) Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 3 0.2-2. (4) mm² AWG 22-2 0 V/6 kv/3 2 I N 24 A (28 A) Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 3 0.2-2. (4) mm² AWG 22-2 0 V/6 kv/3 2 I N 24 A (28 A) Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 3 Through/through terminal block, same profile as double-deck disconnect terminal block without marker carrier, gray housing L/L 2002-260 N/L 2002-2602 L/N 2002-2603 Other terminal blocks with the same profile: Carrier 2002-266 Page 8 Disconnect 2002-267 Page 8 Through/through terminal block, same profile as double-deck disconnect terminal block without marker carrier, blue housing N/N 2002-2604 4 Ground conductor/through terminal block, same profile as double-deck disconnect terminal block without marker carrier, gray housing PE/N 2002-2647 PE/L 2002-267 93 mm/3.66 in 93 mm/3.66 in 93 mm/3.66 in 4-conductor through terminal block, 4-conductor through terminal block, same profile as double-deck disconnect terminal block, without marker carrier, internal commoning, conductor entry position colored in violet, gray housing same profile as double-deck disconnect terminal block, without marker carrier, internal commoning, conductor entry position colored in violet, blue housing L 2002-2608 N 2002-2609 4 Through/through terminal block, same profile as double-deck disconnect terminal block without marker carrier, internal commoning, green-yellow housing PE 2002-2607

! Volume Conductor sizes: 0.2 mm² 4 mm² s + f-st ; Push-in conductor sizes: 0.7 mm² 4 mm² s and 0.7 mm² 2. mm² insulated ferrule, 2 mm 2 0 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. 4 Suitable for Ex i applications noch klären See application notes in Full Line Catalog, Volume, for: Colored push-in type jumper bars, page 39 Vertical jumper, page 42 2002 Series Accessories Appropriate marking systems: WMB/Marking strips/wmb Inline End and intermediate plate, mm thick orange 2002-2692 gray 2002-269 Double-deck marker carrier, pivoting gray 2002-2 (2x2) Insulation stop, pcs/strip, 0.2-0. mm² light gray 2002-7 Insulation stop, pcs/strip, 0.7 - mm² dark gray 2002-72 Push-in type jumper bar, insulated, I N 2 A, light gray 2-way 2002-402 3-way 2002-403 4-way 2002-404 -way 2002-40 6-way 2002-406 7-way 2002-407 8-way 2002-408 9-way 2002-409 0-way 2002-40 Push-in type jumper bar, insulated, I N 2 A, light gray from to 3 2002-433 from to 4 2002-434 from to 2002-43 from to 6 2002-436 from to 7 2002-437 from to 8 2002-438 from to 9 2002-439 from to 0 2002-440 Double-deck vertical jumper, insulated, I N 24 A light gray 2002-492

2 Volume TOPJOB @ Double-Deck Disconnect Terminal Blocks and Carrier Terminal Blocks 2. (4) mm², 2002 Series 0.2-2. (4) mm² AWG 22-2 400 V/6 kv/3 2 I N 6 A Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 3 0.2-2. (4) mm² AWG 22-2 400 V/6 kv/3 2 I N 6 A Terminal block width.2 mm / 0.20 in L 0-2 mm / 0.43 in 3! Conductor sizes: 0.2 mm² 4 mm² s + f-st ; Push-in conductor sizes: 0.7 mm² 4 mm² s and 0.7 mm² 2. mm² insulated ferrule, 2 mm 93 mm/3.66 in,7 mm/2.04 in 6,4 mm/2.22 in 93 mm/3.66 in,7 mm/2.04 in 2 0 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. 4 See application notes in Full Line Catalog, Volume, for: Colored push-in type jumper bars, page 39 Vertical jumper, page 42 Double-deck disconnect terminal block, with movable knife disconnect, gray housing L/L 2002-267 N/L 2002-2672 Double-deck carrier terminal block, upper deck carrier, gray housing L/L 2002-266 N/L 2002-2662 2002 Series Accessories Appropriate marking systems: WMB/Marking strips/wmb Inline End and intermediate plate, mm thick orange 2002-2692 gray 2002-269 Double-deck marker carrier, pivoting gray 2002-2 (2x2) 93 mm/3.66 in,7 mm/2.04 in Double-deck carrier terminal block, upper deck carrier, gray housing PE/L 2002-2667 Insulation stop, pcs/strip, 0.2-0. mm² light gray 2002-7 Insulation stop, pcs/strip, 0.7 - mm² dark gray 2002-72 Push-in type jumper bar, insulated, 4 I N 2 A, light gray 2-way 2002-402 3-way 2002-403 4-way 2002-404 -way 2002-40 6-way 2002-406 7-way 2002-407 8-way 2002-408 9-way 2002-409 0-way 2002-40 Push-in type jumper bar, insulated, I N 2 A, light gray from to 3 2002-433 from to 4 2002-434 from to 2002-43 from to 6 2002-436 from to 7 2002-437 from to 8 2002-438 from to 9 2002-439 from to 0 2002-440 Double-deck vertical jumper, insulated, 4 I N 24 A light gray 2002-492

0.2-2. (4) mm² AWG 22-2 400 V/6 kv/3 2 I N 6 A Terminal block width 6.2 mm / 0.244 in L 0-2 mm / 0.43 in 3 0.2-2. (4) mm² AWG 22-2 400 V/6 kv/3 2 I N 6 A Terminal block width 6.2 mm / 0.244 in L 0-2 mm / 0.43 in 3! TOPJOB @ Double-Deck Fuse Disconnect Terminal Blocks with Pivoting Fuse Holder 2. (4) mm², 2002 Series 3 Volume 93 mm/3.66 in 76,4 mm/3.0 in 93 mm/3.66 in 76,4 mm/3.0 in Conductor sizes: 0.2 mm² 4 mm² s + f-st ; Push-in conductor sizes: 0.7 mm² 4 mm² s and 0.7 mm² 2. mm² insulated ferrule, 2 mm 2 400 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. See application notes in Full Line Catalog, Volume, for: Vertical jumper, page 42 Double-deck fuse disconnect terminal block with pivoting fuse holder, Through/fuse terminal block, for miniature metric fuses x 20 mm, without blown fuse indication Nominal voltage and current are given by the fuse. Double-deck fuse disconnect terminal block with pivoting fuse holder, Through/fuse terminal block, for miniature metric fuses x 20 mm, with blown fuse indication by LED, gray Nominal voltage and current are given by the LED or fuse. Leakage current in case of blown fuse: LED 2mA L/L 2002-26 2 N/L 2002-262 2 2-30 V 2002-26/000-4 2 30-6 V 2002-26/000-42 2 230 V 2002-26/000-836 2 Protective warning marker and insulation stop must be applied individually. Due to the 6.2 mm/0.244 in width of the fuse terminal blocks with pivoting fuse holder, 2004 Series jumpers must be used. 2002 Series Accessories Appropriate marking systems: WMB/Marking strips (see Full Line Catalog, Volume, Section 3) End and intermediate plate, mm thick orange gray Push-in type jumper bar, insulated, I N 32 A, light gray 2-way 3-way 4-way -way 6-way 7-way 8-way 9-way 0-way Push-in type jumper bar, insulated, 4 I N 32 A, light gray from to 3 from to 4 from to from to 6 from to 7 from to 8 from to 9 from to 0 2002-2692 2002-269 2004-402 2004-403 2004-404 2004-40 2004-406 2004-407 2004-408 2004-409 2004-40 2004-433 2004-434 2004-43 2004-436 2004-437 2004-438 2004-439 2004-440 End plate for fuse terminal blocks, 2 mm thick orange 2002-092 gray 2002-09 Insulation stop, pcs/strip, 0.2-0. mm² light gray 2002-7 Insulation stop, pcs/strip, 0.7 - mm² dark gray 2002-72 Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow 2002- Marking strip, plain, mm wide, m roll white 2009-0 Pivoting the fuse holder in the locked open position. Double-deck vertical jumper, insulated, 4 I N 24 A light gray 2002-492 Fuse replacement

4 6,3 mm/2.7 in Volume 6,3 mm/2.7 in 46,8 mm/.8 in TOPJOB @ Disconnect Terminal Blocks for Test and Measurement, 6 mm²/30 A, for Current and Voltage Transformer Circuits, 2006 Series 0. - 6 (0) mm² AWG 20-8 0 V/6 kv/3 2 I N 30 A Terminal block width 8 mm / 0.3 in L 3 - mm / 0. in 3 0. - 6 (0) mm² AWG 20-8 0 V/6 kv/3 2 I N 30 A Terminal block width 8 mm / 0.3 in L 3 - mm / 0. in 3 0. - 6 (0) mm² AWG 20-8 0 V/6 kv/3 2 I N 30 A Terminal block width 8 mm / 0.3 in L 3 - mm / 0. in 3 99,6 mm/3.92 in 99,6 mm/3.92 in 99,6 mm/3.93 in 2-conductor disconnect terminal block for test and measurement, e.g., current and voltage transformer circuits, with touch-proof test sockets, for 4 mm Ø test plug gray 2007-882 20 2-conductor disconnect terminal block, with touch-proof test sockets, for 4 mm Ø test plug gray 2007-88 20 2-conductor through terminal block, with touch-proof test sockets, for 4 mm Ø test plug gray 2007-880 20 2006 Series Accessories End and separator plate,. mm thick, without use of lock-out seal Adjacent jumper for switch lever, insulated, orange, I N 30 A orange 2007-8892 (x0) 2-way 2007-8442 gray 2007-889 (x0) 3-way 2007-8443 End and separator plate,. mm thick, 4-way 2007-8444 for use of lock-out seal -way 2007-844 orange 2007-8894 (x0) 6-way 2007-8446 gray 2007-8893 (x0) 7-way 2007-8447 Lock-out, 8-way 2007-8448 for disconnect link yellow 2007-8899 00 (x20) Locking cover, transparent, mechanically locks multiple links -pole 282-88 (x0) 2-pole 282-882 (x0) 3-pole 282-883 (x0) 4-pole 282-884 (x0) -pole 282-88 (x0) 6-pole 282-886 (x0) 7-pole 282-887 (x0) 8-pole 282-888 (x0) Interlocking link, mechanically locks multiple links, m/3 3 long transparent 20-24 Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow 2006- Appropriate marking systems: WMB/Marking strips (see Full Line Catalog, Volume, Section 3) Jumper, insulated, I N 30 A, orange 2-way 282-432 3-way 282-433 4-way 282-434 -way 282-43 6-way 282-436 7-way 282-437 8-way 282-438 9-way 282-439 0-way 282-440 Jumper with safety lid, insulated, I N 30 A, orange 2-way 3-way 4-way Jumper, special design, I N 30 A, orange -3- -3--7 (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) (x0) 282-432/00-000 282-433/00-000 282-434/00-000 (x0) 282-43/0-000 282-437/0-000 (x0) WMB Multi marking system, 0 strips with 0 markers per card, for terminal widths - 7. mm plain 793- WMB Multi marking system, plain, 0 strips with 0 markers per card, for terminal widths - 7. mm yellow 793-/000-002 red 793-/000-00 blue 793-/000-006 gray 793-/000-007 orange 793-/000-02 light green 793-/000-07 green 793-/000-023 violet 793-/000-024 WMB Multi marking system, 0 strips with 0 markers per card, for terminal widths - 7. mm, yellow k/l (x) 794-3/000-002 WMB Multi marking system, 0 strips with 0 markers per card, for terminal widths - 7. mm, blue U/V (x) 794-4/000-006 Marking strip, plain, mm wide, m roll white 2009-0

! 0. - 6 (0) mm² AWG 20-8 Terminal block width 8 mm / 0.3 in L 3 - mm / 0. in Volume 99,6 mm/3.93 in 46,8 mm/.8 in Integrated test sockets for touchproof 4 mm Ø test plugs. Conductor sizes: 0. mm² 0 mm² s + f-st ; Push-in conductor sizes: mm² 0 mm² s and. mm² 6 mm² insulated ferrule, 2 mm 2 0 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. 2-conductor ground terminal block, with touch-proof test sockets, for 4 mm Ø test plug green-yellow 2007-8807 20 Lock-out prevents accidental operation of disconnect link. Lock-out has snap action into two notched positions. Marking via WMB Multi markers or marking strips. Multipole switching via snap-on type, transparent (locking) cover for disconnect links.

6 Volume TOPJOB @ Disconnect Terminal Blocks for Test and Measurement 0 VDC, Carrier/ Through Terminal Blocks of Same Profile 6 (0) mm²/30 A, 2006 Series 0. - 6 (0) mm² AWG 20-8 AC/DC 000 V/ DC 0 V/2 kv/3 2 I N 30 A Terminal block width mm / 0.9 in L 3 - mm / 0. in 3 0. - 6 (0) mm² AWG 20-8 AC/DC 000 V/ DC 0 V/2 kv/3 2 I N 30 A Terminal block width mm / 0.9 in L 3 - mm / 0. in 3 0. - 6 (0) mm² AWG 20-8 AC/DC 000 V/ DC 0 V/2 kv/3 2 I N 30 A Terminal block width mm / 0.9 in L 3 - mm / 0. in 3 9,2 mm/2.33 in 33 mm/.3 in 33 mm/.3 in 06,9 mm/4.2 in 06,9 mm/4.2 in 06,9 mm/4.2 in 2-conductor disconnect terminal block for test and measurement, with test point, orange disconnect link gray 2006-867 2 blue 2006-8674 2 2006 Series Accessories End and intermediate plate, mm thick orange gray Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow 2006- Push-in type jumper bar, insulated, I N 4 A, light gray from to 3 2006-433 from to 2006-43 Lockout cap, 2006-8692 2006-869 (2x2) (2x2) gray 2006-866 2 blue 2006-8664 2 Appropriate marking systems: WMB/Marking strips (see Full Line Catalog, Volume, Section 3) WMB Multi marking system, 0 strips with 0 markers per card, for terminal widths - 7. mm plain 793- WMB Multi marking system, plain, 0 strips with 0 markers per card, for terminal widths - 7. mm yellow red blue gray orange light green green violet 2-conductor carrier terminal block, with test point Marking strip, plain, for conductor entry hole and operating mm wide, slot m roll gray 2006-9 2 white 2009-0 793-/000-002 793-/000-00 793-/000-006 793-/000-007 793-/000-02 793-/000-07 793-/000-023 793-/000-024 2-conductor through terminal block, with test point, same profile as 2-conductor disconnect terminal block gray 2006-860 2 blue 2006-8604 2 WMB Multi marking system, 0 strips with 0 markers per card, stretchable -.2 mm plain 793- WMB Multi marking system, plain, 0 strips with 0 markers per card, stretchable -.2 mm yellow red blue gray orange light green green violet 793-/000-002 793-/000-00 793-/000-006 793-/000-007 793-/000-02 793-/000-07 793-/000-023 793-/000-024 WMB Inline, plain, stretchable -.2 mm,,0 WMB markers, mm, on roll white 2009-

! Disconnect plug for carrier terminal blocks 0 V/2 kv/3 I N 30 A 7 Volume Protective warning marker must be applied individually. Conductor sizes: 0. mm² 0 mm² s + f-st ; Push-in conductor sizes: mm² 0 mm² s and. mm² 6 mm² insulated ferrule, 2 mm 2 AC/DC 000 V = rated voltage DC 000 V 2 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Strip length, see packaging or instructions. Disconnect plug for carrier terminal blocks, suited when using a carrier terminal block as disconnect terminal block orange 2006-840 48 (4x2) Carrier terminal block with disconnect plug in parked position. Carrier terminal block with disconnect plug in operating position.

3 8 Volume Fuse Terminal Blocks for Cylindrical Fuses 0 x 38 mm²; 3/32 x -/2 8 Series 2. - 6 mm² AWG 24-0 000 V/8 kv/3 2 I N 32 A Terminal block width 7 mm / 0.669 in L 2-3 mm / 0.49 in 3 " Available: January 203 < 0 mm/4.3 in > < mm/2.6 in > Conductor termination: Open clamping unit via integrated lever. 400 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 2 Electrical ratings are given by the fuse (see Full Line Catalog, Volume, pages 234 23). 3 Strip length, see packaging or instructions. Fuse terminal block for cylindrical fuses 0 x 38 mm; 3/32 x /2, without blown fuse indication, suitable for DIN 3 rail acc. to EN 607 Nominal voltage and current are given by the LED or fuse. light gray 8-36 2 Fuse terminal block for cylindrical fuses 0 x 38 mm; 3/32 x /2, with blown fuse indication,230-000 V DC, suitable for DIN 3 rail acc. to EN 607 Nominal voltage and current are given by the LED or fuse. light gray 8-37 2 Cylindrical fuses are not offered by WAGO. Temperature scale handling from - C to +8 C Ferruled conductors up to 0 mm² (AWG 8) can be terminated. Inserting a fuse. Remove terminal block from the carrier rail.

Voltage Tap 283 Series 3 9 800 V/8 kv/3 I N 24 A Volume 800 V = rated voltage 8 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) Voltage tap, with 0 mm cable, for terminal blocks 6 mm² (283/783 Series) and 3 mm² (28/78 Series) gray 283-407 2 Always push voltage tap down into the terminal block until fully inserted!

7 20 Volume X-COM -SYSTEM Male Headers with Solder Pins and Rivet Fixing Flanges Pin Spacing mm Pin spacing mm / 0.97 in, gray 2 V/4 kv/3 300 V, 20 AU 0 V/4 kv/2 300 V, 20 A2 I N 32 A 2 2 V/0 V = rated voltage 4 kv = rated surge voltage 3/2 = pollution degree (see Full Line Catalog, Volume, Section 4) 2 See current-carrying capacity curve, page 378 and at www.wago.com Pole No. Male header with straight solder pins and rivet fixing flanges, x mm, gray 2 769-632/007-000 200 3 769-633/007-000 4 769-634/007-000 769-63/007-000 6 769-636/007-000 7 769-637/007-000 2 8 769-638/007-000 2 9 769-639/007-000 2 0 769-640/007-000 2 769-64/007-000 2 2 769-642/007-000 2 3 769-643/007-000 4 769-644/007-000 769-64/007-000 Mounting with 3 mm Ø blind rivets Accessories -conductor female plug, Pole straight gray Coding pin, 769-02 for coding female plugs orange 769-43 00 -conductor female plug, Pole with lateral locking levers gray 769-02/02-000 3,2 22,2 L L2 L3 3,6 2,6 2,6 9,7 6, 3 9,9 6,7 3, 6,9 8,3 7,8,4 8,7 3,7, 2,8,2 L L = L + 2.4 mm, L2 = L + 7 mm, L3 = L + 3. mm L = (No. of poles - ) x pin spacing + 6.2 mm Dimensions in mm

X-COM @-SYSTEM Orange Version! 7 2 Technical Data see Full Line Catalog, Volume -Conductor/-Pin Carrier Terminal Blocks 2022-202 Page 394 2-Conductor/-Pin-Carrier Terminal Blocks 2022-302 Page 396 2-Conductor/2-Pin-Carrier Terminal Blocks 2022-402 Page 396 and Female Plugs for Self-Assembly Page 402 -conductor end module 2022-82 -conductor center module 2022-72 -conductor base module 2022-62 and -Conductor Female Plugs Page 400 2022-0/000-02 2022-02/000-02 2022-03/000-02 2022-04/000-02 2022-0/000-02 2022-06/000-02 2022-07/000-02 2022-08/000-02 2022-09/000-02 2022-0/000-02 2022-/000-02 2022-2/000-02 2022-3/000-02 2022-4/000-02 2022-/000-02 Volume

7 22 Volume X-COM @-SYSTEM-MINI Pre-Assembled Female Plugs 2020 Series 0.4 - (.) mm² AWG 24-6 0 V/6 kv/3 2 I N 3. A 3 module width 3. mm / 0.38 in L 9 - mm / 0.39 in 4 0.4 - (.) mm² AWG 24-6 0 V/6 kv/3 2 I N 3. A 3 module width 3. mm / 0.38 in L 9 - mm / 0.39 in 4 0.4 - (.) mm² AWG 24-6 0 V/6 kv/3 2 I N 3. A 3 module width 3. mm / 0.38 in L 9 - mm / 0.39 in 4 Pole Pole Pole Pole Pole Pole Pole No. -conductor female plug with ground base module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 3 2020-03/000-036 -conductor female plug with ground end module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 3 2020-03/000-037 Pole No. -conductor female plug with ground base module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 3 2020-03/000-038 -conductor female plug with ground end module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 3 2020-03/000-039 Pole No. -conductor female plug with ground base module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 2020-0/000-036 -conductor female plug with ground end module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 2020-0/000-037 For other lengths up to maximum poles, please contact factory. Accessories Female Plugs Protective warning marker, with high-voltage symbol, black, for terminal blocks yellow 2000- Locking lever, 9.6 mm wide orange 2022-2 gray 2022- Locking lever, 4.8 mm wide orange 2022-42 gray 2022-4 Strain relief plate, gray 3 mm width 734-326 6 mm wide 734-327 2. mm width 734-328 2 mm wide 734-329 For other lengths up to maximum poles, please contact factory. Appropriate marking systems: WMB/Marking strips (see Full Line Catalog, Volume, Section 3) For other lengths up to maximum poles, please contact factory. WMB Multi marking system, 0 strips with 0 markers per card, for 3. mm terminal block width plain 793-3 Marking strip, plain, mm wide, m roll white 2009-0

! 7 0.4 - (.) mm² AWG 24-6 0 V/6 kv/3 2 I N 3. A 3 module width 3. mm / 0.38 in L 9 - mm / 0.39 in 4 23 Volume Pole Pole Conductor sizes: 0.4 mm². mm² s + f-st ; Push-in conductor sizes: 0. mm². mm² s and 0. mm² 0.7 mm² insulated ferrule, 0 mm 2 0 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section 4) 3 Current-carrying capacity curves upon request 4 Strip length, see packaging or instructions. Pole No. -conductor female plug with ground base module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 2020-0/000-038 -conductor female plug with ground end module (green-yellow), for insertion into carrier terminal blocks, with coding fingers 2020-0/000-039 For other lengths up to maximum poles, please contact factory.

2 24 Volume Vario-T-BOXX and Variobox Vario-T-BOXX High-quality Sortimo plastic case containing a selection of WAGO installation connectors Dimensions: 440 x 3 x 80 mm Variobox Indestructible Sortimo metal case containing a selection of WAGO installation connectors Dimensions: 440 x 330 x 66 mm Description Vario-T-BOXX, Variobox Vario-T-BOXX 887-90 Variobox 887-9 High-quality Sortimo cases contain a selection of WAGO connectors for all applications in electrical building installations. Contains: COMPACT PUSH WIRE connectors for junction boxes 2 x 0. - 2. mm 2 2273-202 00 3 x 0. - 2. mm 2 2273-203 00 x 0. - 2. mm 2 2273-20 00 8 x 0. - 2. mm 2 2273-208 Contains: COMPACT PUSH WIRE connectors for junction boxes 2 x 0. - 2. mm 2 2273-202 00 3 x 0. - 2. mm 2 2273-203 00 x 0. - 2. mm 2 2273-20 00 8 x 0. - 2. mm 2 2273-208 Compact splicing connectors 3 x 0.08-4 mm 2 222-43 x 0.08-4 mm 2 222-4 40 Compact splicing connectors 3 x 0.08-4 mm 2 222-43 x 0.08-4 mm 2 222-4 40 Lighting connectors - 2. mm 2 224-0 00 Lighting connectors - 2. mm 2 224-0 00 MICRO PUSH WIRE connectors for junction boxes dark gray 4 x 0.6-0.8 mm Ø 243-204 00 red 4 x 0.6-0.8 mm Ø 243-804 00 dark gray 8 x 0.6-0.8 mm Ø 243-208 Mounting carrier for 6 connectors 243-3 0 MICRO PUSH WIRE connectors for junction boxes dark gray 4 x 0.6-0.8 mm Ø 243-204 00 red 4 x 0.6-0.8 mm Ø 243-804 00 dark gray 8 x 0.6-0.8 mm Ø 243-208 Mounting carrier for 6 connectors 243-3 0

2 2 Volume

26 Volume 2

Contents Volume 2 Series Pages SMD Terminal Blocks with Push-Buttons Pin Spacing 4 mm, Black 2060 28 29 SMD Terminal Blocks with Push-Buttons Pin Spacing 8 mm 2060 30 3 27 Volume 2 Connecting Link for SMD Terminal Blocks with Push-Buttons, Pin Spacing 4 mm 2060 32 33 THR Terminal Strips with Push-Buttons Pin Spacing 3. mm 80 34 3 PCB Terminal Strips with Push-Buttons Pin Spacing 3. mm 80 36 37 PCB Terminal Strips with Push-Buttons Pin Spacing 2. mm 2 38 39 Modular PCB Terminal Blocks and Strips with Angled Push-Buttons Pin Spacing: /.08 mm, 7./7.62 mm, 0/0.6 mm 26 40 42

28 Volume 2 SMD Terminal Blocks with Push-Buttons, 0.7 mm 2 Pin Spacing 4 mm, Black 2060 Series SMD terminal blocks with CAGE CLAMP S and push-buttons Push-in termination of rigid, solid conductors and fine-stranded conductors with ferrules Convenient termination/removal of fine-stranded conductors via pushbuttons Just 4. mm high Available in tape-and-reel packaging for automated assembly For light gray versions, see Full Line Catalog, Volume 2, page 8. Technical data: Pin Spacing 4 mm 0.7 in Ratings per IEC/EN 60664- Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 63 V 60 V 320 V Rated surge voltage 2. kv 2. kv 2. kv Nominal current 9 A 9 A 9 A Approvals per UL 977 Rated voltage, -pole 600 V Rated voltage, 2 or more poles 2 V Nominal current UL 9 A Conductor data: Connection technology CAGE CLAMP S Conductor size: solid 0.2 0.7 mm 2 Conductor size: fine-stranded 0.2 0.7 mm 2 Conductor size: fine-stranded 0.2 0.34 mm 2 (with insulated ferrule) Conductor size: fine-stranded 0.2 0.34 mm 2 (with uninsulated ferrule) AWG 24 8 Strip length 6 7 mm / 0.24 0.28 in Conductor entry angle 0 to PCB Material data: Material group I Insulating material Glass-fiber-reinforced polyphthalamide (PPA-GF) Flammability rating per UL 94 0V Lower/Upper limit temperature 60 C / +0 C Contact material Copper alloy Contact plating Tin-plated Current-Carrying Capacity Curve Pin spacing: 4 mm / Conductor size: 0.7 mm 2 f-st Based on: EN 602--2 / Reduction factor: Current in A 20 0 0 0 20 30 40 60 70 80 90 00 0 2-, 4-, 6-pole Accessories for 2060 Series: Ambient operating temperature in C Conductor rated current Volume 2/Page: Operating tool (233-33) 27 Application note: Suitable for lead-free, reflow-soldering profiles acc. to DIN EN 6760- and IEC 60068-2-8 up to max. 260 C peak temperature. Due to customer specific variables (e.g., component configuration and orientation, type of soldering machine, solder paste), it is recommended that trial runs are conducted to ensure product and process compatibility under actual manufacturing conditions. Recommendation for SMD positioning pattern: Material thickness, µm. Pattern layout identical to solder pad layout. Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section

SMD Terminal Blocks with Push-Buttons, 0.7 mm 2! 29 Pin spacing 4 mm / 0.7 in 0.2 0.7 mm 2 AWG 24 8 60 V/2. kv/2 9 A Volume 2 4 < > < 3, > <,7 > < 0, > < 4, > < L > < 4 > 2,2 < > R >< 0,3 >,3 <,4 <_ 6, _> > < < 4 > > < 2, <_ 6 _> > 3, <,2 < ) > < 0,9 ( 4 ) < 4 2 < > > 0,4 > < 0,4 > < < A > > 0,4 < < 24 > <, > L = (pole no. x pin spacing) 0. mm / Pole No. Pieces per Reel SMD terminal blocks with push-buttons in tape-and-reel packaging, black 2060-42/998-404 0 2 2060-422/998-404 000 3 2060-423/998-404 7 R = Feed direction A = (No. of poles x pin spacing) + 4 mm Terminal blocks can be arranged side by side without loss of poles. Reel diameter: 330 mm Inserting solid conductors via push-in termination. Insert/remove fine-stranded conductors by lightly pressing on push-button (e.g., using a 233-33 operating tool or a ball point pen)

30 Volume 2 SMD Terminal Blocks with Push-Buttons, 0.7 mm 2 Pin Spacing 8 mm 2060 Series SMD terminal blocks with CAGE CLAMP S and push-buttons 8 mm pin spacing version for higher rated voltages Push-in termination of rigid, solid conductors and fine-stranded conductors with ferrules Convenient termination/removal of fine-stranded conductors via pushbuttons Height of just 4. mm minimizes on-board LED shadowing Available in tape-and-reel packaging for automated assembly Technical data: Pin Spacing 8 mm 0.34 in Ratings per IEC/EN 60664- Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 400 V 630 V 000V Rated surge voltage 6 kv 6 kv 6 kv Nominal current 9 A 9 A 9 A Approvals per UL 977 Rated voltage 600 V Nominal current UL 9 A Current-Carrying Capacity Curve Pin spacing: 4 mm / Conductor size: 0.7 mm 2 f-st Based on: EN 602--2 / Reduction factor: Current in A 20 0 Conductor data: Connection technology CAGE CLAMP S Conductor size: solid 0.2 0.7 mm 2 Conductor size: fine-stranded 0.2 0.7 mm 2 Conductor size: fine-stranded 0.2 0.34 mm 2 (with insulated ferrule) Conductor size: fine-stranded 0.2 0.34 mm 2 (with uninsulated ferrule) AWG 24 8 Strip length 6 7 mm / 0.24 0.28 in Conductor entry angle 0 to PCB Material data: Material group I Insulating material Glass-fiber-reinforced polyphthalamide (PPA-GF) Flammability rating per UL 94 0V Lower/Upper limit temperature 60 C / +0 C Contact material Copper alloy Contact plating Tin-plated 0 0 20 30 40 60 70 80 90 00 0 Ambient operating temperature in C 2-, 4-, 6-pole Conductor rated current Accessories for 2060 Series: Volume 2/Page: Operating tool (233-33) 27 Application note: Suitable for lead-free, reflow-soldering profiles acc. to DIN EN 6760- and IEC 60068-2-8 up to max. 260 C peak temperature. Due to customer specific variables (e.g., component configuration and orientation, type of soldering machine, solder paste), it is recommended that trial runs are conducted to ensure product and process compatibility under actual manufacturing conditions. Recommendation for SMD positioning pattern: Material thickness, µm. Pattern layout identical to solder pad layout. Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section

SMD Terminal Blocks with Push-Buttons, 0.7 mm 2! 3 Pin spacing 8 mm / 0/34 in 0.2 0.7 mm 2 AWG 24 8 630 V/6 kv/2 9 A Volume 2 4 < < 3, > <,7 > < < 8 > 0, >,4 <_ 6, _> > < < 4 > > < 2, <_ 6 _> > 3, < > < 4, >,2 < ) > < 0,9 < ( 4 ) L = (pole no. x pin spacing) 0. mm L < 4 2 < > > > 2,2 < > 0,4 > < 0,4 > < R < A > R = Feed direction A = (No. of poles x pin spacing) + 4 mm >< 0,3 > 0,4 < >,3 < < 24 > <, > / Pole No. Pieces per Reel SMD terminal blocks with push-buttons in tape-andreel packaging, light gray* 2 2060-802/998-404 7 Reel diameter: 330 mm Inserting solid conductors via push-in termination. (Picture shows 2060 Series) Insert/remove fine-stranded conductors by lightly pressing on push-button (e.g., using a 233-33 operating tool or a ball point pen) *Depending on reflow soldering temperatures and times, color deviations may occur for light gray connectors. These deviations will have no impact on functionality.

32 Volume 2 Connecting Links for SMD Terminal Blocks with Push-Buttons, 0.7 mm 2 Pin Spacing 4 mm 2060 Series Connecting link simplifies LED circuit board assembly Easy push-in termination and disconnection without push-button actuation Technical data: Pin Spacing 4 mm 0.7 in Ratings per IEC/EN 60664- Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 63 V 60 V 320 V Rated surge voltage 2. kv 2. kv 2. kv Nominal current 9 A 9 A 9 A Approvals per UL/CSA* Rated voltage, -pole Rated voltage, 2 or more poles Nominal current UL Material data: Material group I Insulating material Polyamide 6.6 (PA 6.6) Flammability rating per UL 94 0V Lower/Upper limit temperature 60 C / +0 C Contact material Copper alloy Contact plating Silver-plated Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section *UL/CSA approval pending

< < Connecting Links for SMD Terminal Blocks with Push-Buttons, 0.7 mm 2! 33 Pin spacing 4 mm / 0.7 in 60 V/2. kv/2 9 A Volume 2 < 26 > 4 > > < L < <7,2 <, 2,6,9 > < > < < max. 22 > > > > 4, < min. 4,4 max.,4 < < max. 22 > min. 4,4 max.,4 < L = (pole no. x pin spacing) 0.6 mm Pole No. Connecting link for SMD terminal blocks with pushbuttons 2060-90 2 2060-902 3 2060-903 Inserting the connecting link into terminal block. > > Assembly: Place PCBs on a flat surface and insert links into terminal blocks on adjoining PCBs. Disassembly: Pull PCBs apart. (maximum 0 connections/disconnections) The PCBs must be secured (see figure above).

34 Volume 2 THR* Terminal Strips with Push-Buttons,. mm 2 Pin Spacing 3. mm 80 Series Terminal strips with push-button actuated CAGE CLAMP S Simple, push-in terminations of solid and ferruled conductors Push-buttons that close flush with minimal force for convenient termination/removal of fine-stranded conductors Convenient, tool-free operation Technical data: Pin Spacing 3. mm 0.38 in Ratings per IEC/EN 60664- Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 200 V 320 V 320 V Rated surge voltage 4 kv 4 kv 4 kv Nominal current 7.A 7.A 7.A Approvals per UL/CSA Use group UL 09 B C D Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology CAGE CLAMP S Conductor size: solid 0.2. mm 2 Conductor size: fine-stranded 0.2. mm 2 Conductor size: fine-stranded 0.2 mm 2 (with insulated ferrule) Conductor size: fine-stranded 0.2 mm 2 (with uninsulated ferrule) AWG 24 6 Strip length 9 0 mm / 0.3 0.39 in Conductor entry angle 0 to PCB Solder pin: length/width 2.2 mm / 0. x 0.7 mm Solder pin: metal-plated hole. +0. mm Ø Material data: Material group III a Insulating material Nylon 4.6 (PA 4.6) Flammability rating per UL 94 V2 Lower/Upper limit temperature 60 C / +0 C Clamping spring material Chrome-nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Current-Carrying Capacity Curve Pin spacing: 3. mm / Conductor size:. mm 2 f-st Based on: EN 602--2 / Reduction factor: Current in A 20 0 0 0 20 30 40 60 70 80 90 00 0 2-, 4-, 6-, 2-pole Accessories for 80 Series Ambient operating temperature in C Conductor rated current Volume 2/age: Marking accessories 40 43 Operating tools 26 28 Test plug 38 Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section *For THR soldering, see Volume 2, page 8

THR Terminal Strips with Push-Buttons,. mm 2! 3 Pin spacing 3. mm / 0.38 in 0.2. mm 2 AWG 24 6 320 V/4 kv/2 7. A 300 V/0 A Volume 2 < L > < 0,6 < 3,6 > 0,7 > < >2,2< 0,_> > 3, < > 2 < > 0, < 3, > >< <_ < 2,6 > < <_ < 3, < > > < 2 3, > L = (pole no. x pin spacing) +. mm Pole No. THR terminal strip with push-buttons, black 2 80-302/200-604 600 (4 x ) 3 80-303/200-604 420 (4 x 0) 4 80-304/200-604 300 (4 x 7) 80-30/200-604 260 (4 x 6) 6 80-306/200-604 220 (4 x ) 7 80-307/200-604 80 (4 x 4) 8 80-308/200-604 60 (4 x 40)

36 Volume 2 PCB Terminal Strips with Push-Buttons,. mm 2, In-Line Solder Pin/Pole, Front Side, Pin Spacing 3. mm 80 Series Terminal strips with push-button actuated CAGE CLAMP S Version with in-line solder pins Simple, push-in terminations of solid and ferruled conductors Push-buttons that close flush with minimal force for convenient termination/removal of fine-stranded conductors Convenient, tool-free operation Versions with/without test slots and spacers Versions available with custom internal commoning (factory assembly), e.g., commoning ground conductor Technical data: Pin Spacing 3. mm 0.38 in Ratings per IEC/EN 60664- Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 60 V 60 V 320 V Rated surge voltage 2. kv 2. kv 2. kv Nominal current 7.A 7.A 7.A Approvals per UL/CSA Use group UL 09 B C D Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology CAGE CLAMP S Conductor size: solid 0.2. mm 2 Conductor size: fine-stranded 0.2. mm 2 Conductor size: fine-stranded 0.2 mm 2 (with insulated ferrule) Conductor size: fine-stranded 0.2 mm 2 (with uninsulated ferrule) AWG 24 6 Strip length 9 0 mm / 0.3 0.39 in Conductor entry angle 0 to PCB Solder pin: length/width 3.2 mm / 0. x 0.7 mm Solder pin: drilled hole diameter. +0. mm Material data: Material group I Insulating material Polyamide 6.6 (PA 6.6) Flammability rating per UL 94 0V Lower/Upper limit temperature 60 C / +0 C Clamping spring material Chrome-nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Current-Carrying Capacity Curve Pin spacing: 3. mm / Conductor size:. mm 2 f-st Based on: EN 602--2 / Reduction factor: Current in A 20 0 0 0 20 30 40 60 70 80 90 00 0 2-, 4-, 6-, 2-pole Accessories for 80 Series Ambient operating temperature in C Conductor rated current Volume 2/Page: Marking accessories 40 43 Operating tools 26 28 Test plug 38 Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section

PCB Terminal Strips with Push-Buttons,. mm 2, In-Line Solder Pin/Pole, Front Side! 37 With test slots Pin spacing 3. mm / 0.38 in Pin spacing 3. mm / 0.38 in 0.2. mm 2 AWG 24 6 0.2. mm 2 AWG 24 6 320 V/4 kv/2 7. A 300 V/0 A 320 V/4 kv/2 7. A 300 V/0 A Volume 2 < L > < 0,6 < 3,6 > < L > < 0,6 < 3,6 > < 0,_> < 0,_> 0,7 > < > 3, < > 2 < > 0, < <_ < 2,6 > 0,7 > < > 3, < > 2 < > 0, < <_ < 2,6 > L = (pole no. x pin spacing) +. mm Pole No. Pole No. Terminal strip with push-buttons, in-line solder pin/pole, front side, test slots for 2 mm Ø test plug, gray Terminal strip with push-buttons in-line solder pin/pole, front side, gray 2 80-2 600 (4 x ) 2 80-32 600 (4 x ) 3 80-3 420 (4 x 0) 3 80-33 420 (4 x 0) 4 80-4 320 (4 x 80) 4 80-34 300 (4 x 7) 80-260 (4 x 6) 80-3 260 (4 x 6) 6 80-6 220 (4 x ) 6 80-36 220 (4 x ) 7 80-7 80 (4 x 4) 7 80-37 80 (4 x 4) 8 80-8 60 (4 x 40) 8 80-38 60 (4 x 40) 9 80-9 40 (4 x 3) 9 80-39 40 (4 x 3) 0 80-60 20 (4 x 30) 0 80-3 20 (4 x 30) 80-6 00 (4 x 2) 80-36 00 (4 x 2) 2 80-62 00 (4 x 2) 2 80-362 00 (4 x 2) 3 80-63 00 (4 x 2) 3 80-363 00 (4 x 2) 4 80-64 00 (4 x 2) 4 80-364 00 (4 x 2) 80-6 80 (4 x 20) 80-36 80 (4 x 20) 6 80-66 80 (4 x 20) 6 80-366 80 (4 x 20) 7 80-67 80 (4 x 20) 7 80-367 80 (4 x 20) 8 80-68 60 (4 x ) 8 80-368 60 (4 x ) 9 80-69 60 (4 x ) 9 80-369 60 (4 x ) 20 80-70 60 (4 x ) 20 80-370 60 (4 x ) 2 80-7 60 (4 x ) 2 80-37 60 (4 x ) 22 80-72 60 (4 x ) 22 80-372 60 (4 x ) 23 80-73 60 (4 x ) 23 80-373 60 (4 x ) 24 80-74 40 (4 x 0) 24 80-374 40 (4 x 0) Item no. suffixes for colored terminal strips (production and prices depend on quantity required): blue... /000-006 Ordering example: orange... /000-02 Terminal strip, 3. mm pin spacing, 6-pole, blue: 80-36/000-006 For assemblies in other lengths, with in-line solder pins, and other colors or with direct marking, please contact factory.

38 Volume 2 PCB Terminal Strips with Push-Buttons, 0. mm 2, In-Line Solder Pin/Pole, Front Side, Pin Spacing 2. mm 2 Series Compact terminal strips with push-buttons Version with in-line solder pins Push-in termination of solid conductors Push-button operation for connecting of fine-stranded conductors and removing of conductors 4 conductor entry angle provides easy, space-saving wiring Custom color combinations Terminal strips also available with spacers upon request Technical data: Pin Spacing 2. mm 0.098 in Ratings per IEC/EN 60664- Overvoltage category III III II Pollution degree 3 2 2 Rated voltage 00 V 60 V 320 V Rated surge voltage 2. kv 2. kv 2. kv Nominal current 4 A 4 A 4 A Approvals per UL/CSA Use group UL09 B C D Rated voltage Nominal current UL Nominal current CSA Conductor and solder pin data: Connection technology CAGE CLAMP S Conductor size: solid 0.4 0. mm 2 (0.4 0.8 mm Ø) Conductor size: fine-stranded 0.2 0. mm 2 AWG 24 20 (26 sol. Strip length 8. 9. mm / 0.32 0.36 in Conductor entry angle 4 to PCB Solder pin: length/width 3.6 mm / 0.4 x 0.7 mm Solder pin: drilled hole diameter. - 0. mm Current-Carrying Capacity Curve Pin spacing 2. mm / Conductor cross section 0. mm 2 f Based on: EN 602--2 / Reduction factor Current in A 8 6 4 2 0 0 20 30 40 60 70 80 90 00 0 2-, 4-, 6-, 2-, 24-pole Ambient operating temperature in C Nominal current for terminal strip Material data: Material group I Insulating material Polyamide 6.6 (PA 6.6) Flammability rating per UL 94 0V Lower/Upper limit temperature 60 C / +0 C Clamping spring material Copper alloy Contact plating Copper Accessories for 2 Series Volume 2/Page: Marking accessories 40 43 Operating tools 26 28 Test pin 38 Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section

PCB Terminal Strips with Push-Buttons, 0. mm 2, In-Line Solder Pin/Pole, Front Side! 39 Pin spacing: 2. mm / 0.098 in 0.2 0. mm 2 AWG 24 20 60 V/2. kv/2 4 A Volume 2 < L > 0,4 ( < 7,3 _> < 2 > < > 3,6 <, > < 3, >,3 > 2, < 0,7 > <,2 > < L = (pole no. x pin spacing) +. mm Pole No. Color Terminal strip with push-buttons in-line solder pin/pole, front side, gray Additional item nos. for colored terminal strips: 2 2-302 720 (4 x 80) black... -... /000-004 3 2-303 20 (4 x 30) red... -... /000-00 4 2-304 400 (4 x 00) blue... -... /000-006 2-30 340 (4 x 8) light gray... -... /000-009 6 2-306 280 (4 x 70) orange... -... /000-02 7 2-307 240 (4 x 60) green... -... /000-023 8 2-308 220 (4 x ) violet... -... /000-024 9 2-309 200 (4 x ) white... -... /000-0 0 2-30 80 (4 x 4) 2-3 60 (4 x 40) Ordering example: 2 2-32 40 (4 x 3) Terminal strip, 3. mm pin spacing 3 2-33 40 (4 x 3) 8-pole, orange: 2-308/000-02 4 2-34 20 (4 x 30) 2-3 20 (4 x 30) Production and prices depend on quantity required. 6 2-36 00 (4 x 2) 7 2-37 00 (4 x 2) 8 2-38 80 (4 x 20) 9 2-39 80 (4 x 20) 20 2-320 80 (4 x 20) 2 2-32 80 (4 x 20) 22 2-322 80 (4 x 20) 23 2-323 80 (4 x 20) 24 2-324 60 (4 x ) Please contact factory for other lengths, terminal strips with spacers, other colors, mixed-color connector strips, or direct marking.

40 Volume 2 Modular PCB Terminal Blocks and Strips with Angled Push-Buttons, 2. mm 2 Pin Spacing: /.08 mm, 7./7.62 mm, 0/0.6 mm 26 Series Modular terminal blocks and terminal strips with push-button actuated CAGE CLAMP New version with angled push-buttons for easy top-of-unit actuation Set to metric or inch pin spacing by compressing terminal strips together or pulling them apart Ideal for in-the-field wiring thanks to simplified push-button actuation Convenient, tool-free operation Technical data: Pin Spacing /.08 mm 7./7.62 mm 0/0.6 mm 0.2 in 0.3 in 0.4 in Ratings per IEC/EN 60664- IEC/EN 60664- IEC/EN 60664- Overvoltage category III III II III III II III III II Pollution degree 3 2 2 3 2 2 3 2 2 Rated voltage 2 V 320 V 630 V 320 V 320 V 630 V 0 V 630 V 000V Rated surge voltage 4 kv 4 kv 4 kv 4 kv 4 kv 4 kv 6 kv 6 kv 6 kv Nominal current 24 A 24 A 24 A 24 A 24 A 24 A 24 A 24 A 24 A Approvals per UL/CSA UL/CSA UL/CSA Use group UL 09 B C D B C D B C D Rated voltage 300 V 300 V 300 V 300 V 300 V 300 V Nominal current UL A 0 A A 0 A A 0 A Nominal current CSA A 0 A A 0 A A 0 A Conductor and solder pin data: Connection technology CAGE CLAMP Conductor size: solid 0.08 2. mm 2 Conductor size: fine-stranded 0.08 2. mm 2 Conductor size: fine-stranded 0.2. mm 2 (with insulated ferrule) Conductor size: fine-stranded 0.2. mm 2 (with uninsulated ferrule) AWG 28 2 (2: THHN, THWN) Strip length 6 mm / 0.20 0.24 in Conductor entry angle 4 to PCB Solder pin: length/width 4 mm / 0.7 x 0.7 mm Solder pin: drilled hole diameter. +0. mm Material data: Material group I Insulating material Polyamide 6.6 (PA 6.6) Flammability rating per UL 94 0V Lower/Upper limit temperature 60 C / +0 C Clamping spring material Chrome-nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Current-Carrying Capacity Curve Pin spacing: mm / Conductor size: 2. mm 2 f-st Based on: EN 602--2 / Reduction factor: Current in A 4 40 3 30 2 20 0 0 0 20 30 40 60 70 80 90 00 0 Ambient operating temperature in C 2-, 4-, 6-, 2-pole Accessories for 26 Series Conductor rated current Volume 2/Page: Marking accessories 40 43 Operating tools 26 28 Commoning strips 67 69 Test plug adapter 96 Approvals are available online at: www.wago.com For more technical information, see Full Line Catalog, Volume 2, Section

Modular Terminal Blocks with Angled Push-Buttons, 2. mm 2 " 4 Pin spacing /.08 mm / 0.2 in Pin spacing 7./7.62 mm / 0.3 in Pin spacing 0/0.6 mm / 0.4 in 0.08 2. mm 2 AWG 28 2 0.08 2. mm 2 AWG 28 2 0.08 2. mm 2 AWG 28 2 320 V/4 kv/2 24 A 300 V/0 A 320 V/4 kv/2 24 A 300 V/0 A 630 V/6 kv/2 24 A 300 V/0 A Volume 2 < > 2, < < < > 2, < < < > 2, < < < 3 > 3, < < 3 > 3, < < 3 > 3, < > 4 > < 2, > > < (,08) > 4 > < 2, > < > 7, < (7,62) > 4 > < 2, > < > 0 < (0,6) Color Color Color Modular terminal block with angled push-button, 2 solder pins/pole Modular terminal block with angled push-button, 2 solder pins/pole Modular terminal block with angled push-button, 2 solder pins/pole gray 26-46 600 (6 x 00) gray 26-6 400 (4 x 00) gray 26-66 300 (3 x 00) red 26-840 600 (6 x 00) red 26-8 400 (4 x 00) red 26-860 300 (3 x 00) dark gray 26-842 600 (6 x 00) dark gray 26-82 400 (4 x 00) dark gray 26-862 300 (3 x 00) light gray 26-843 600 (6 x 00) light gray 26-83 400 (4 x 00) light gray 26-863 300 (3 x 00) blue 26-844 600 (6 x 00) blue 26-84 400 (4 x 00) blue 26-864 300 (3 x 00) orange 26-846 600 (6 x 00) orange 26-86 400 (4 x 00) orange 26-866 300 (3 x 00) light green 26-847 600 (6 x 00) light green 26-87 400 (4 x 00) light green 26-867 300 (3 x 00) End plates for 26 Series snap-on type, mm/0.039 in thick Color gray 26-00 00 dark gray 26-200 00 light gray 26-300 00 blue 26-400 00 red 26-0 00 orange 26-600 00 light green 26-700 00 black 26-800 00 For other colors, please contact factory.

42 PCB Terminal Strips with Angled Push-Buttons,. mm 2 Volume 2 Pin spacing /.08 mm / 0.2 in Pin spacing 7./7.62 mm / 0.3 in Pin spacing 0/0.6 mm / 0.4 in 0.08 2. mm 2 AWG 28 2 0.08 2. mm 2 AWG 28 2 0.08 2. mm 2 AWG 28 2 320 V/4 kv/2 24 A 300 V/0 A 320 V/4 kv/2 24 A 300 V/0 A 630 V/6 kv/2 24 A 300 V/0 A < > 2, < < < > 2, < < < > 2, < < 3 > 3, < < < 3 > 3, < < 3 > 3, < > 4 3,6 0,7 > < > < > < > < (,08) < L > > 4 > < 3,6 > < 0,7 > < > 7, < (7,62) < L > > 4 > < 3,6 > < 0,7 > < > 0 < (0,6) < L > L = (pole no. x pin spacing) + 2.9 mm Pole No. Pole No. Pole No. Terminal strip with angled push-buttons, 2 solder pins/pole, gray Terminal strip with angled push-buttons, 2 solder pins/pole, gray Terminal strip with angled push-buttons, 2 solder pins/pole, gray 2 26-402/334-000 400 (4 x 00) 2 26-2/334-000 280 (4 x 70) 2 26-602/334-000 200 (4 x ) 3 26-403/334-000 280 (4 x 70) 3 26-3/334-000 80 (4 x 4) 3 26-603/334-000 40 (4 x 3) 4 26-404/334-000 200 (4 x ) 4 26-4/334-000 40 (4 x 3) 4 26-604/334-000 00 (4 x 2) 26-40/334-000 60 (4 x 40) 26-/334-000 20 (4 x 30) 26-60/334-000 80 (4 x 20) 6 26-406/334-000 40 (4 x 3) 6 26-6/334-000 00 (4 x 2) 6 26-606/334-000 60 (4 x ) 7 26-407/334-000 20 (4 x 30) 7 26-7/334-000 80 (4 x 20) 7 26-607/334-000 60 (4 x ) 8 26-408/334-000 00 (4 x 2) 8 26-8/334-000 60 (4 x ) 8 26-608/334-000 60 (4 x ) 9 26-409/334-000 00 (4 x 2) 9 26-9/334-000 60 (4 x ) 9 26-609/334-000 40 (4 x 0) 0 26-40/334-000 80 (4 x 20) 0 26-0/334-000 60 (4 x ) 0 26-60/334-000 40 (4 x 0) 2 26-42/334-000 60 (4 x ) 2 26-2/334-000 40 (4 x 0) 2 26-62/334-000 40 (4 x 0) 6 26-46/334-000 60 (4 x ) 6 26-6/334-000 40 (4 x 0) 6 26-66/334-000 20 (4 x ) 24 26-424/334-000 40 (4 x 0) 24 26-24/334-000 20 (4 x ) 24 26-624/334-000 20 (4 x ) 36 26-436/334-000 20 (4 x ) 48 26-448/334-000 20 (4 x ) Item no. suffixes for colored terminal strips (production and prices depend on quantity required): red... -... /000-00 Ordering example: blue... -... /000-006 Terminal strip, /.08 mm pin spacing dark gray... -... /000-008 8-pole, orange: 26-408/334-02 light gray... -... /000-009 orange... -... /000-02 light green... -... /000-07 For assemblies in other lengths and colors or with direct marking, please contact factory.

43 Volume 2

44 Item number index Page Page 20 Series 20-36 4 20-37 4 20-24 4 2 Series 2-4 2 Series 2-302 39 l 2-324 26 Series 26-00 4 26-200 4 26-300 4 26-400 4 26-402/334-000 42 l 26-40/334-000 42 26-42/334-000 42 26-46/334-000 42 26-424/334-000 42 26-436/334-000 42 26-448/334-000 42 26-46 4 26-0 4 26-2/334-000 42 l 26-0/334-000 42 26-2/334-000 42 26-6/334-000 42 26-24/334-000 42 26-6 4 26-600 4 26-602/334-000 42 l 26-60/334-000 42 26-62/334-000 42 26-66/334-000 42 26-624/334-000 42 26-66 4 26-700 4 26-800 4 26-840 4 26-842 4 26-843 4 26-844 4 26-846 4 26-847 4 26-8 4 26-82 4 26-83 4 26-84 4 26-86 4 26-87 4 26-860 4 26-862 4 26-863 4 26-864 4 26-866 4 26-867 4 282 Series 282-432 4 282-432/00-000 4 282-433 4 282-433/00-000 4 282 Series 282-434 4 282-434/00-000 4 282-43 4 282-43/0-000 4 282-436 4 282-437 4 282-437/0-000 4 282-438 4 282-439 4 282-440 4 282-88 4 282-882 4 282-883 4 282-884 4 282-88 4 282-886 4 282-887 4 282-888 4 283 Series 283-407 9 734 Series 734-326 22 734-327 22 734-328 22 734-329 22 769 Series 769-02 20 769-02/02-000 20 769-43 20 769-632/007-000 769-64/007-000 20 793 Series 793-4 793-/000-002 4 793-/000-00 4 793-/000-006 4 793-/000-007 4 793-/000-02 4 793-/000-07 4 793-/000-023 4 793-/000-024 4 793-3 4 793-4 793-4/000-002 793-4/000-00 793-4/000-006 793-4/000-007 793-4/000-02 793-4/000-07 793-4/000-023 793-4/000-024 793-9 793-/000-002 6 793-/000-00 6 793-/000-006 6 793-/000-007 6 793-/000-02 6 793-/000-07 6 793-/000-023 6 793-/000-024 6 794 Series 794-3/000-002 4 794-4/000-006 4 Products highlighted in RED are new items for Fall 202 Page Page 8 Series 8-36 8 8-37 8 80 Series 80-2 37 l 80-74 80-302/200-604 3 l 80-308/200-604 80-32 37 l 80-374 887 Series 887-90 24 887-9 24 2000 Series 2000-4 2000-2 4 2000-402 4 2000-403 4 2000-404 4 2000-40 4 2000-406 4 2000-407 4 2000-408 4 2000-409 4 2000-40 4 2000-433 4 2000-434 4 2000-43 4 2000-436 4 2000-437 4 2000-438 4 2000-439 4 2000-440 4 2000-228 4 2000-228/099-000 4 2000-2228 4 2000-2228/099-000 4 2000-2248 4 2000-2248/099-000 4 2000-228 4 2000-228/099-000 4 2000-229 4 2000-2292 4 200 Series 200-200-402 200-403 200-404 200-40 200-406 200-407 200-408 200-409 200-40 200-433 200-434 200-43 200-436 200-437 200-438 200-439 200-440 2002 Series 2002-9 2002-2 2002-7 7 2002-72 7 2002 Series 2002-400 9 2002-402 7 2002-403 7 2002-404 7 2002-40 7 2002-406 7 2002-407 7 2002-408 7 2002-409 7 2002-40 7 2002-433 7 2002-434 7 2002-43 7 2002-436 7 2002-437 7 2002-438 7 2002-439 7 2002-440 7 2002-472 7 2002-473 7 2002-474 7 2002-47 7 2002-476 7 2002-477 7 2002-478 7 2002-479 7 2002-480 7 2002-48 7 2002-482 7 2002-492 2002-800/000-40 7 2002-09 3 2002-092 3 2002-66 7 2002-69 7 2002-692 7 2002-86 7 2002-89 7 2002-892 7 2002-96 7 2002-99 7 2002-992 7 2002-260 0 2002-2602 0 2002-2603 0 2002-2604 0 2002-2607 0 2002-2608 0 2002-2609 0 2002-26 3 2002-26/000-4 3 2002-26/000-42 3 2002-26/000-836 3 2002-262 3 2002-2647 0 2002-267 0 2002-266 2 2002-2662 2 2002-2667 2 2002-267 2 2002-2672 2 2002-269 2002-2692 2003 Series 2003-499 8 2003-0 8 2003-6640 8 2003-664 8 2003-6642 8 2003-6643 8 2003-6644 8 2003-664 8 2003-6646 8

4 Page Page Page Page 2003 Series 2003-6649 8 2003-66 8 2003-66 8 2003-6692 9 2004 Series 2004-402 3 2004-403 3 2004-404 3 2004-40 3 2004-406 3 2004-407 3 2004-408 3 2004-409 3 2004-40 3 2004-433 3 2004-434 3 2004-43 3 2004-436 3 2004-437 3 2004-438 3 2004-439 3 2004-440 3 2006 Series 2006-4 2006-9 6 2006-433 6 2006-43 6 2006-208 6 2006-840 7 2006-860 6 2006-8604 6 2006-866 6 2006-8664 6 2006-867 6 2006-8674 6 2006-869 6 2006-8692 6 2007 Series 2007-8442 4 2007-8443 4 2007-8444 4 2007-844 4 2007-8446 4 2007-8447 4 2007-8448 4 2007-880 4 2007-8807 2007-88 4 2007-882 4 2007-889 4 2007-8892 4 2007-8893 4 2007-8894 4 2007-8899 4 200 Series 200-208 6 206 Series 206-208 6 2020 Series 2020-03/000-036 22 2020-03/000-037 22 2020-03/000-038 22 2020-03/000-039 22 2020-0/000-036 22 2020-0/000-037 22 2020-0/000-038 23 2020-0/000-039 23 2022 Series 2022-4 22 2022-42 22 2022-22 2022-2 22 2022-0/000-02 2022-/000-02 2 2022-62 2 2022-72 2 2022-82 2 2022-202 2 2022-302 2 2022-402 2 2060 Series 2060-42/998-404 29 2060-422/998-404 29 2060-423/998-404 29 2060-802/998-404 3 2060-90 33 2060-902 33 2060-903 33 2009 Series 2009-0 4 2009-4 2009-9 2009-74 4 2009-82 4 2009-304 9 2009-30 9 2009-309 9 2009-30 9 2009-42 7 2009-44 7 2009-46 7

WAGO Worldwide Companies and Representatives 46 Algeria please contact WAGO France Argentina Bruno Schillig S.A. Arenales 4030, B604CFD Florida, PBA Phone +4 4730 00 Fax +4 476 7244 wago@schillig.com.ar Australia Kontact Group Building Automation & WINSTA Systems Office: 730 Springvale Rd Mulgrave Victoria 370 P.O. Box 3003, Wheelers Hill VIC 3 Tel. +6 03 960277 Fax +6 03 960727 sales@kontactgroup.com.au NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD 43-67 River Street Richmond, Victoria, 32, P.O. Box 99 Phone +6 3 9429 2999 Fax +6 3 9429 07 export@wago.com Austria WAGO Kontakttechnik Ges.m.b.H. Laxenburger Straße 244 230 Wien Phone +43 6780 Fax +43 677 info.at@wago.com Azerbaijan AZ Technics LTD Zulfi V. Alizade Y.Safarov str.33, AZ02, Baku Republic of Azerbaijan Tel. +994 2 496833 Fax +994 2 4968334 info@aztechnics.az Belarus UP FEK pr-t Pushkina 29-B 2200 Minsk Phone +37 7 20289 Fax +37 7 20289 wago@fek.by Belgium WAGO Kontakttechnik Excelsiorlaan 930 Zaventem Phone +32 2 779090 Fax +32 2 779099 info-be@wago.com Bosnia and Herzegovina please contact WAGO Bulgaria Brazil WAGO Eletroeletrônicos Ltda Rua Américo Simões 470 São Roque da Chave Itupeva SP Brasil 329-000 Phone + 49 099 Fax + 49 090 info.br@wago.com Bulgaria WAGO Kontakttechnik GmbH & Co. KG Business Center Serdika 2E Akad. Ivan Geshov Blvd. Building, Floor 4, Office 47 330 Sofia Phone +39 2 489 46 09 Fax +39 2 928 28 info-bg@wago.com Canada please contact WAGO USA Chile Desimat Chile Av Puerto Vespucio 9670 Pudahuel Santiago Phone +6 2 74702 Fax +6 2 74703 ventaschile@desimat.cl China WAGO ELECTRONIC (TIANJIN) Co. LTD No., Quan Hui Road, Wuqing Development Area Tianjin 30700 Phone +86 22 967688 Fax +86 22 967668 info-cn@wago.com Columbia T.H.L. Ltda. Cra. 49 B # 9-33 Bogotá Phone +7 62 8 Fax +7 62 60 28 ventas-thl@thl-ltda.com Croatia M.B.A. d.o.o. za trgovinu i zastupanje Frana Supila 2 Matulji HR Phone +38 27-736 Fax +38 27-066 mba@ri.htnet.hr Croatia GENERA CTR d.o.o. - just for automation technology - Siget 8 b 0020 Zagreb Phone +38 3647849 Fax +38 3636662 wago@geneza.hr Czech Republic WAGO Elektro spol. sr. o. Rozvodova 6/36 43 00 Praha 4 - Modřany Phone +420 26 090 43 Fax +420 26 090 44 info.cz@wago.com Denmark WAGO Danmark Filial of WAGO Kontakttechnik GmbH & Co. KG Lejrvej 7 30 Værløse Phone +4 44 37777 Fax +4 44 37787 salg.dk@wago.com Ecuador ECUAINSETEC CIA LTDA El Zurriago 77 y El Vengador Quito Phone +93 2 2 26 9 48 Fax +93 2 2 46 8 33 g.castro@ecuainsetec.com.ec Egypt IBN Engineering Instrumentation & Control 7 a El Shaheed Ahmed Hamdi St. King Faisal, Giza Phone +20 2 7243 Fax +20 2 722709 sales@ibnengineering.com Estonia Eltarko OÜ Laki 4-2 062 Tallinn Phone +372 6 773 Fax +372 6 7786 andres@eltarko.ee Finland WAGO Kontakttechnik GmbH & Co. KG Filial i Finland Vellamonkatu 30 B 00 Helsinki Phone +38 9 7744 060 Fax +38 9 7744 0660 tilaus@wago.fi France WAGO CONTACT SAS Paris Nord 2 83 Rue des Chardonnerets B.P. 6 - Tremblay en France 9947 - ROISSY CDG CEDEX Phone +33 487290 Fax +33 4863220 info-fr@wago.com Germany WAGO Kontakttechnik GmbH & Co. KG Postfach 28 80, 3238 Minden Hansastraße 27 32423 Minden Phone +49 7 887-0 Fax +49 7 887-69 info@wago.com WAGO Kontakttechnik GmbH & Co. KG Waldstraße 99706 Sondershausen Phone +49 3632 69-0 Fax +49 3632 69-00 info@wago.com Great Britian WAGO Limited Triton Park, Swift Valley Industrial Estate RUGBY Warwickshire, CV2 SG Phone +44 788 68008 Fax +44 788 680 uksales@wago.com Greece PANAGIOTIS SP. DIMOULAS - BIOMAT DIMOULAS AUTOMATIONS Kritis Str. 26 0439 Athen Tel. +30 20 883 3337 Fax +30 20 883 4436 wago.info@dimoulas.com.gr Hong Kong National Concord Eng., Ltd. A-B, /F. Southeast Industrial Building 6-69 Castle Peak Road Tsuen Wan, N.T. Phone +82 242926 Fax +82 2429264 sales@nce.com.hk Hungary WAGO Hungá ria KFT Ipari Park, Gyár u. 2 2040 Budapest Phone +36 23 2-70 Fax +36 23 2-66 info.hu@wago.com Iceland S. Gudjonsson ehf. Audbrekku 9-202 Kopavogur Phone +34 20-40 Fax +34 20-4 export@wago.com India WAGO & CONTROLS (INDIA) LTD. C-27, Sector-8, Phase-III Noida-20 30 Gautam Budh Nagar (U.P) Phone +9 20 2 80409 0 Fax +9 20 2 8008 info@wagoindia.com Indonesia please contact WAGO Singapore Iraq please contact WAGO Middle East Iran Patsa Industry No. 2 Bahar St. South Shiraz Ave P.O. Box.: 87-698 4369 Tehran Phone +98 2 88047626 Fax +98 2 88040886 info.uae@wago.com Ireland Drives & Controls F4, Riverview Business Park Nangor Road Dublin 2 Phone +33 4604474 Fax +33 46047 wago@drivesandcontrols.ie Israel Comtel Israel Electronic Solutions Ltd. Bet Hapaamon 20 Hataas Street P.O. Box 66 4442 Kefar-Saba Phone +972 9 76 77 240 Fax +972 9 76 77 243 sales@comtel.co.il Italy WAGO ELETTRONICA SRL Via Parini 40033 Casalecchio di Reno (BO) Phone +39 0 6322 Fax +39 0 627274 info-ita@wago.com Japan WAGO Co. of JAPAN Ltd. Nittetsu ND-Tower Building 4F Kameido --7 Koto-Ku Tokyo 36-007 Phone +8 3 627 20 Fax +8 3 627 20 info-jp@wago.com Kazakhstan TOO INTANT ul. Muratbaeva, d. 6 0026 Almaty Phone +7 727 237492 Fax +7 727 2980 info@intant.kz TOO Technik-Trade ul. i. A. Protosanova, 8 070004 Ust-Kamenogorsk Phone +7 7232 24064 Fax +7 7232 232 info@technik.kz Korea Mahani Electric Co. Ltd. 792-7 Yeoksam-Dong Kangnam-Gu, 3-080 Seoul, Korea Phone +82 2 294 3300 Fax +82 2 294 3397 export@wago.com Kosovo please contact WAGO Bulgaria Kuwait Kuwait Controls Company Al Sour Street, Above Lufthansa Airline Safat Kuwait 3062 Phone +96 222 4300 Fax +96 224 33698 info.uae@wago.com Latvia INSTABALT LATVIA SIA Vestienas iela 6 Rīga, LV-03 Phone +37 790 88 Fax +37 790 80 info@instabalt.lv Lebanon Gemayel Trading & Contracting Antonins Project P.O. BOX 70-096 Antelias, Lebanon Phone +96 4 2 029 Fax +96 4 2 029 gtc.libanon@gmail.com

Lithuania INSTABALT LIT UAB Savanorių 87 Vilnius, 203 Phone +370 2 322 29 Fax +370 2 322 247 info@instabalt.lt Luxembourg please contact WAGO Belgium Macedonia please contact WAGO Bulgaria Malaysia WAGO Representative Office Malaysia No 806, Block A4, Leisure Commerce Square, No 9, Jalan PJS 8/9, 46 Petaling Jaya, Selangor Darul Ehsan, Malaysia Phone +60 3 7877 776 Fax +60 3 7877 2776 kian.guan.tan@wago.com HPH Materials (M) Sdn Bhd No. 4, Jalan Nilam /6 Suban Hi-Tech Industrial Park 40000 Shah Alam Selangor, D.E. Malaysia Phone +60 3 638 223 Fax +60 3 638 823 info@hphmaterials.com Setia Raya Teknik Sdn. Bhd. 40 & 42 Jalan SS/4 Subang Jaya, 470 P.J. Selangor D.E. Malaysia Phone +60 3 633 Fax +60 3 633 34 sales@setiaraya.com.my Mexico WAGO SA de CV Av. Del Marques 38 Bodega 3 P. I. Bernardo Quintana 76240 El Marques, Querétaro Phone +2 442 22 946 Fax +2 442 22 63 Toll-Free: 00-800-309-97 info.mx@wago.com Morocco please contact WAGO France Netherlands WAGO Nederland Laan van de Ram 9 7324 BW Apeldoorn Phone +3 36 83 0 Fax +3 36 83 99 info-nl@wago.com New Zealand NHP NZ 7 Lockhart Place Mt Wellington New Zealand Phone +64 9 276967 Fax +64 9 276992 export@wago.com Norway WAGO Norge NUF Jerikoveien 20 067 Oslo Phone +47 22 30 94 Fax +47 22 30 94 info.no@wago.com Pakistan FuziLogiX Automation & Control Suit No. 4, th Floor, Shan Arcade New Garden Town, Lahore Pakistan Phone +92 42 94 3-4 Fax +92 42 8 43 info@fuzilogix.com Peru Desimat Peru Av. Velasco Astete 237 Surco Lima Phone + 272776 Fax + 27276 export@wago.com Philippines please contact WAGO Singapore Poland WAGO ELWAG sp. z o. o. ul. Piękna 8 a -6 Wrocław Phone +48 7 3602970 Fax +48 7 3602999 wago.elwag@wago.com Portugal MORGADO & CA. LDA - SEDE Estrada Exterior da Circunvalação 38/360 Apartado 07 443 Rio Tinto Phone +3 22 9770600 Fax +3 22 9770699 geral@morgadocl.pt Republic of Moldova Electroservice Slavinschi T.T. str. Bolgarskaia 9, office 6 200 Kishinev Phone +373 22 274427 Fax +373 22 22448 es@es.mldnet.com Romania WAGO Kontakttechnik GmbH & Co. KG WAGO Representative Office Bucharest Str. Nicolae G. Caramfil Nr. 26, Bl. D, Et. 3, Ap. 7, Sect., OP2 0444-Bucuresti, Romania Tel. +40-(0)3 42 8 68 Fax +40-(0)2 232 02 3 info-ro@wago.com VDR & Servicii srl Str. Valeriu Branişte, nr. 60, ap., sector 3 Romania Phone +40 2 32274/76 Fax +40 2 3227 office@componente-automatizari.ro Russia ООО WAGO Kontakt Rus Dmitrovskoe shosse, 7, bldg. 2/ 274 Moscow Russia Phone +7 49 9874790 Fax +7 49 987479 info.ru@wago.com WAGO Branch office Ekaterinburg Phone +7 343 26 3426 WAGO Branch office Novosibirsk Phone +7 383 27 9244 WAGO Branch office St. Petersburg Phone +7 82 32 98 Saudi Arabia Ali Zaid Al Quraishi & Partners Electrical Services of S.A. Al Quraishi Center, King Khalid Street P.O. Box 7386 Dammam - 3462 Phone +966 3 83 Fax +966 3 832297 info.uae@wago.com Serbia please contact WAGO Bulgaria Tagor Electronic doo Tihomira Brankovica 2 8000 Nis Tel. +38 8 74 Fax +38 8 272 ana.aleksic@tagor.rs Singapore WAGO Electronic Pte Ltd 0 Upper Aljunied Link #04-04 Johnson Controls Building Singapore 367904 Phone +6 62866776 Fax +6 6284242 info-sing@wago.com Slovakia WAGO Elektrik spol. s r. o Odborárska 2 8302 Bratislava Tel. +42 2 469 23 export@wago.com Proelektro spol. s r.o. Na barine 22 8403 Bratislava Lamač Tel. +42 2 469 23 info@wago.sk Slovenia GENERA d.o.o. Prevale 0 236 Trzin Phone +386 43930 Fax +386 4393090 genera@genera.si IC elektronika d.o.o. Vodovodna cesta 00 000 Ljubljana Phone +386 6800 Fax +386 68907 info@ic-elect.si South Africa Shorrock Automation (Pty) Ltd Postnet Suite # 29 Private Bag X 8,Elardus Park 0047 Pretoria Phone +27 2 40300 Fax +27 2 40322 sales@shorrock.co.za Spain DICOMAT S.L. Avda. de la Industria, 36 Apartado Correos,.78 2808 - Alcobendas (Madrid) Phone +34 9 662362 Fax +34 9 660089 info@dicomat.com Sweden WAGO Sverige WAGO Kontakttechnik GmbH Tyskland Filial Box 639, 727 Järfälla Datavägen 9 A, 743 Järfälla Phone +46 8840680 Fax +46 8840699 info.se@wago.com Switzerland WAGO CONTACT SA Rte. de l Industrie 9 Case Postale 68 64 Domdidier Phone +4/26 676 7 86 Fax +4/26 676 7 0 info.switzerland@wago.com Syria Zahabi Co. 8/ Shouhadaa St., P.O. Box 8262 Aleppo Phone +963 2 2 22 23 / 6 Fax +963 2 2 24 768 info.uae@wago.com Taiwan R.O.C. WAGO Contact, Ltd. F., No.68, Jiankang Rd Zhonghe City Taipei County 238, Taiwan Phone +886 2 22223 Fax +886 2 222 info.taiwan@wago.com Thailand WAGO Representative Office Thailand 4th Floor, KS Building 23/6-8 Rachada Phisek Road Ding Daeng Bangkok 0320 Phone +66 2 6936 Fax +66 2 69362 wago@asianet.co.th US Power Distribution Co., Ltd. 4th Floor K.S. Building 23/6-8 Rachada Phisek Road Ding Daeng, Bangkok 0400 Phone +66 2 2763040 Fax +66 2 2763049 wago@asianet.co.th Tunisia please contact WAGO France Turkey WAGO Elektronik Sanayi ve Ticaret Ltd. Şti. Yukan Dudullu Mahallesi Bayraktar Bulvan Cad. Hattat Sok. No. 0 3477 Ümraniye - Istanbul Turkey Tel. +90 26 472 33 Fax +90 26 472 990 info.tr@wago.com Ukraine NPP Logicon Predslavinskaya street, 39, office 303 03 Kiev Phone +380 44 22809 Fax +380 44 26803 info@logicon.ua OOO Mikropribor ul. Kotelnikova, 4 03 Kiev Phone +380 44 369386 Fax +380 44 369387 sales@micropribor.kiev.ua ed Arab Emirates (UAE) WAGO Middle East (FZC) SAIF Zone, Q4-282 P.O. Box: 2066 Sharjah, UAE Phone +97 6 79920 Fax +97 6 7992 info.uae@wago.com USA WAGO Corporation N20 W929 Freistadt Road Germantown, WI 3022 Phone + 262 2 6222 Fax + 262 2 3232 Toll-Free: -800 DIN Rail (346-724) info.us@wago.com Venezuela PETROBORNAS, C.A. C.C. PLAZA AEROPUERTO - PISO - LOCAL P - B - 03 (80) UNARE - PUERTO ORDAZ - ESTADO BOLÍVAR REPÚBLICA BOLIVARIANA DE VENEZUELA Tel. +8 286 9 3382 Fax +8 286 9 3382 info@petrobornas.com Vietnam please contact WAGO Germany (Minden) Version: 09/202 Current addresses at www.wago.com 47