ELECTRICAL SPECIFICATIONS: Programmable, Digital, Wide-Range Ajustable Current & Dimming Class P Listed Constant Current LED Driver Model Number AC-6CD.4APPU Input Voltage: 2-277V Input Frequency: 5/6Hz Side and Bottom Mount/Leads Options < Sec. Start time Dim-to-% (Default) Power Input Power Input Current Min PF (full load) Max THD (full load) Voltage Current T case Max Min. Starting Temp** IP Rating Efficiency Up To Dimming Protocol Dimming Range 9 to 6W 7W.6A @ 2V.26A @ 277V >.9 <2% 27 to 55V 7 to 4mA 9 C -4 C 64 85% to V to % **This driver can operate down to -4 C in a non-dimming condition. Below C some flicker may be observed. WIRING: PHYSICAL: Hot Spot Lead Lengths Black 5.9" Blue 5.9" Purple 5.9" White 5.9" Red 5.9" Gray 5.9" Dimensions Length Width Height Mounting AC-6CD.4APPU 2.8".34".6" 2.5" SAFETY: Class P Listed Class A sound rating Overload Protection Open/Short Circuit Protection LED driver has a life expectancy of 5, hours at Tcase of 75 C LED driver has a life expectancy of, hours at Tcase of 65 C Warranty: 5 yrs based on max case temp of <75 C; 3 yrs based on max case temp of 9 C* Input/ Isolation FCC Title 47 CFR Part 5 Surge Protection (3 KV) Hazardous Location (HL) Dim-To-Off Programming Option o Active: Code = E2 4 4 o Inactive: Code = E2 4 4 INSTALLATION: Max Remote installation distance is 8 ft LED driver cases should be grounded LED drivers shall be installed inside electrical enclosures 8 AWG 6V/5C tinned stranded copper lead-wires are required for installation *AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75 C; 3 years from date of manufacture when operated at a max case temp of up to 9 C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy. RoHS COMPLIANT LEAD-FREE
AC-6CD.4APPU Phone Instructions First you must have a Android device (phone/tablet) with NFC-V app downloaded. Open App; then place the device on top of the driver matching up sensors until it syncs up Basic format Write To Check: Read Insert the appropriate code from chart above Read Write Shows you the Block - Successfully written will appear This is where the code you input appears IOUT/VOUT CURVE Voltage [V] 6 55 5 45 4 35 3 25 2 5 5 Use with NFC-V Reader App Available Free at Google App Store.5.7.9..3.5 Current [A] CONTROL THE IOUT WITH THE PROGRAMMING WAND. DOWNLOAD SOFTWARE FROM http://www.aceleds.com/programmable.php
Life Time (khours) AC-6CD.4APPU Life Time v.s. Case Temperature Curve 8 6 4 2 8 6 4 2 3 32 35 4 45 5 55 6 65 7 75 8 85 9 2 8 6 4 2 Performance Characteristics Case Temperature Curve ( C) Derating Curve -4-2 2 4 6 8 Outside Driver Ambient Temperature ( C) 2Vac & 277Vac
AC-6CD.4APPU Performance Characteristics 9.% Efficiency v.s. Load Efficiency (%) 8.% 7.% 6.% 2V 277V 5.% 5.% 6.% 7.% 8.% 9.%.% PF Power Factor v.s. Load.98 2V.96 277V.94.92.9.88.86 5.% 6.% 7.% 8.% 9.%.%
Performance Characteristics AC-6CD.4APPU Current (A) Current v.s. Dimming 2.4 2.2 2.8.6.4.2.8.6.4.2 2 3 4 4 6 7 8 9 Current (A) 2.4 2.2 2.8.6.4.2.8.6.4.2 Dimming (-V) Current v.s. Resistance 5 5 2 25 3 35 4 45 5 55 6 65 7 75 8 85 9 95 Resistance (KΩ)