Wildcat Series 4+1 Port 1000Base-SX / T, Gigabit Ethernet Switch, Multimode, 850nM, 5.0VDC, MIL-DTL-38999

Similar documents
Mercury Series Gigabit Ethernet, External D38999, 1000Base-T/SX Media Converter, 28Vdc, Multimode, 850nM Vcsel s

Viking Series 10x1000Base-T + 2x10GBase-SR Ports, MIL-DTL-38999, Unmanaged Ethernet Switch, 28VDC

Spitfire Series Fast Ethernet, 3.3VDC, MIL- DTL-38999, 100Base-TX/FX Media Converter, Multimode,1310nM

Mustang Series Fast Ethernet, TFOCA II, 100Base- TX/FX Media Converter, Multimode, 1310nM, 3.3VDC

Mercury Series Fast Ethernet, External D38999, 100Base-TX/FX Media Converter, 28VDC, Multimode,1310nM

Maverick Series Fast Ethernet, External TFOCA II *, 10/100Base-TX/FX Media Converter, 28Vdc, Multimode,1310nm

Saturn Series Gigabit Ethernet, Sealed RJ-45 & LC, 1000Base-T / LX Media Converter, 24Vdc, Single Mode, 1310nM Lasers

Direct 9 Series ARINC 801 Compliant Dual Optical Receiver, 1x/2x/4xFC Applications, Multimode, 850nM

Product Catalog. High-speed Optoelectronic Components and Communication Subsystems

Port Unmanaged Ethernet Switch 10/100/1000 BASE-T With Series 805 Mighty Mouse Connector

DATA SHEET D-SUB ELECTRO-OPTICAL CONNECTOR MULTI-MODE, 1.25MM FERRULE ARINC 801 FRONT INSERT FRONT RELEASE

8D Series MIL-DTL Series III

Electrical Test voltage (Vrms) Service sea level at m M I II

DATA SHEET D38999 SERIES III TYPE CONNECTOR

114FX6. Phone: Fax: Web: -

RJF TV Ethernet Connection System for Harsh Environment

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO

FW FIELD TV. IEEE 1394 Connection System for Harsh Environments. Description. Applications

RUGGED VPX MEDIA & PROTOCOL CONVERSION MODULES

GLENAIR, INC AIR WAY GLENDALE, CA FAX

USBF TV (USB-A) ROHS COMPLIANT N & BZ. Amphenol. USB connection system for harsh environment. Part number code

AEROSPACE, DEFENSE & MARINE /// DL AND DBA SERIES CONNECTORS

A Universal platform

Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.

ATP SERIES ATP Series

Amphenol. SCE Series Interconnect Solutions. the ultimate connection. For more information call Amphenol PCD

250 Mbps Transceiver in LC FB2M5LVR

Rugged USB Solutions USB3.0


PERFORMANCE SPECIFICATION SHEET

DEUTSCH AFD Series Connectors Qualified to MIL-DTL Series II


RJF RB Ethernet connection system for harsh environment Industrial Ethernet

RJ-10G-SX Rugged 10G 1x12 Optical Transceiver Fiber Optic Transceiver

DT Connectors. Features. Connector

Micro D Series Filtered Connectors

308FX2-N. Phone: Fax: Web:

317FX-N. Phone: Fax: Web: -

40GBase QSFP+ PSM4 1.5km Optical Transceiver

Product Data Sheet. 3M Active Optical Cable (AOC) Assemblies for CX4 and QSFP+ Applications

DJT SERIES CONNECTORS

FUJITSU COMPONENT LIMITED

2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805

QSFP+ Copper Cable Assembly

RUGGEDIZED HIGH-DENSITY OPTICAL INTERCONNECTS FOR HARSH ENVIRONMENTS

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

GPP SRC 10Gbps SFP+ Optical Transceiver, 300m Reach

ndl-q & ndl-t SerieS CONNECTORS

LIGHTCONEX BANDWIDTH UNLEASHED

MIL-DTL Series I, II, III, and IV Cylindrical Connectors. Environmentals, Hermetics, Filters, Feed-Thrus, Lanyards, Sav-Cons and More!

Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years. MIL-DTL audio connectors

Series 801 Mighty Mouse Double-Start ACME Thread Plug

1.25Gbps SFP Transceiver

PERFORMANCE SPECIFICATION SHEET

DIGITAL VIDEO INTERFACE MEDIA CONVERTER PRODUCTS

RTX series EN

SHFP-2G-B Gb/s BiDi SFP Transceiver Hot Pluggable, Simplex LC/SC, +3.3V, Single mode, 20km, 0~70 C 1310/1550nm or 1310/1490nm DFB/PIN

INDUSTRIAL 1000BASE-T TO 1000BASE-X MEDIA CONVERTERS. KCD-400 Series. Installation Guide

Dura-ConTM Hermetic Connectors

triaxial CONtaCts Overview Features

SMI OPTICAL INTERCONNECTS

Description. Features. Application. Ordering information

RJF RB Ethernet connection system for harsh environment Industrial Ethernet

SFP+ Active Optical Cable

PoE Powered Gigabit Ethernet Media Converters 1000BASE-T TO 1000BASE-SX/LX. KGC-352 Series. Installation Guide

Stride SE2 Series Unmanaged Industrial Ethernet Switches and Media Converters

µcom-10gb + Amphenol MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors

TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI Standards

A APXDxxHM0xDL Gb/s XFP Transceiver. APXDxxHM0xDL40. Product Features. Applications. General. Product Selection. Product Channel Selection

SHFP-GE-EX. 1.25Gb/s SFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1550nm DFB/PIN, Single mode, 40km, 0~70 C

Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z

LuxCis fiber optic interconnect solutions. ARINC 801, EN F725 Series

The Custom Interconnect Leader

U THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO

MTC High-Performance Modular Rectangular Connectors with Removable Contacts

SHFP-GE-B Gb/s BiDi SFP Transceiver Hot Pluggable, Simplex LC/SC, +3.3V, Single mode, 80km, 0~70 C 1490/1550nm DFB/PIN

81.X111GSR1131S-TP 10Gb/s 850nm Multimode XFP Optical Transceiver

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:

1250Mbps 850nm MF SFP Transceiver 550m HOLS-PG85Z-LN-CV/PG85Z-LD-CV

Introducing MULTIGIG RT 2-R. Ruggedized Connectors for VPX Applications

40G QSFP LR4 optical transceiver with DDM function

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN

Installation Guide. 100BASE-TX/100BASE-FX Fast Ethernet Media Converter NC-200FT/FC. -1-iIiNC-200FT/FC P/N:

µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex

OP-SFP Gbps SFP+ Transceiver

25Gb/s 10km SFP28 Optical Transceiver TR-PY13L-N00 Product Specification

Interconnect Solutions for Aircraft Data Network Systems

Series PC 3.5 precision subminiature connectors

FB1M2KPR. Industrial Ethernet Fiber Optic OptoLock Transceiver Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS

XYT-DAC_QSFP+ to QSFP+

Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1

305FX-N. Phone: Fax: Web:

GLC-FE-100FX-RGD-LEG. 155Mbps SFP Transceiver

O B M D 3 Q H 2 B 01

250 Mbps Transceiver in OptoLock IDL300T XXX

Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1

IP68 Sealed - Mini USB Buccaneer

2Mbps 850nm MMF SFP Transceiver 2km HOLS-P1850-LD-CV-B

F-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution

Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications

Transcription:

Wildcat Series 4+1 Port 1000Base-SX / T, Gigabit Ethernet Switch, Multimode, 850nM, 5.0VDC, MIL-DTL-38999 Five Port (4+1), Receptacle FEATURES 4x 1000Base-SX switched optical Ethernet ports with D38999 interface 1x 10/100/1000Base-T Ethernet internal connection through Samtec SMT connector Compliant with IEEE-802.3:2005 Gigabit Ethernet 1000Base-SX and 10/100/1000Base-T Optical fi ber link distances up to 550 Meters (50/125) Operating temperature range from -40 C to +85 C Shock, vibration and immersion resistant per MIL-STD-810 Olive Drab Cadmium plating meets stringent EMI / RFI and corrosion resistance performance specifi cations Aluminum housings are strong, durable and light weight MIL-T-29504 compliant optical fiber connector interface MIL-DTL-38999 fi ber optic insert per MIL-STD-1560 Samtec EQCD Series electrical connector for SMT interface APPLICATIONS Wildcat series bulkhead mounted Gigabit Ethernet switches enable high speed network communications over long distances in harsh environments. Gigabit Ethernet computers and peripherals Telecom and datacom switch / router rack-to-rack links Storage or computation clusters D38999 + SMT/PCB - 4+1 Port Gigabit Ethernet Optical Switch DESCRIPTION Wildcat series panel mounted Gigabit Ethernet switches consist of 4x1000Base-SX plus 1x10/100/1000Base-T Ethernet switch functions integrated into a panel mounted MIL-DTL-38999 optical connector assembly. The optical transmitters are high output 850nM VCSEL lasers. The optical receivers consist of GaAs PIN and preamplifier assemblies and limiting post-amplifiers. The electrical interface to the Wildcat series bulkhead mounted Gigabit Ethernet switches is a ribbon coax to Samtec EQCD high density cable assembly enabling SMT interconnection to a customer s backplane, motherboard or daughtercard. Wildcat series panel mounted D38999 Gigabit Ethernet switches are vibration isolated, environmentally hardened components designed for use in harsh environment applications. Sealed against liquid and solid contaminants Shock and vibration resistant The MIL-DTL-38999, Series III shell provides a sealed optical interface that is water-tight to MIL-STD-810 when mated. The multimode optical fi ber interface supports applications where copper cable link distance, bandwidth, weight or bulk make the use of twisted pair, twinax or quadrax copper conductors unacceptable. ORDERING INFORMATION Application Product Number Flange W41F-5SCT-HW-Lxxx Jam Nut W41J-5SCT-HW-Lxxx See page 6 for standard part number / cable length options 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 1

ABSOLUTE MAXIMUM RATINGS Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided each limiting parameter is in isolation and all other parameters have values within the performance specifi cation. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Parameter Symbol Minimum Typical Maximum Unit Storage Temperature T S -55 +100 C RECOMMENDED OPERATING CONDITIONS Parameter Symbol Minimum Typical Maximum Unit Operating Temperature T A -40 +85 C Supply Voltage xxxx-xxbx-xx xxxx-xxcx-xx V CC +6.0 +4.5 Power Supply Noise (p-p) N P 200 mv 12.0 5.0 +24.0 +5.5 VDC INTERFACE SPECIFICATIONS COMPLIANCE Requirement Feature Condition Notes MIL-STD-883 ESD Class II 2200V MIL-STD-810 Vibration 3.8g 2 /Hz 43G rms MIL-STD-810 Shock 40.0g 6-9mS MIL-STD-810 Immersion 1.0 meter 2.0Hours MIL-STD-1344 Flame Resistance Method 1012 30 Seconds MIL-STD-1344 Damp Heat 10 Cycles 24 Hours MATERIALS Item Detail Notes Shell and housing Connector Shell Plating Insert Interfacial Seal Aluminum Alloy OD-CD, NI or ZN-NI Thermoplastic Elastomer 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 2

OPTICAL TRANSMITTERS T A = Operating Temperature Range Parameter Symbol Minimum Typical Maximum Unit Optical Output Power P o -9.5-4.0 dbm Optical Output Wavelength λ OUT 830 850 860 nm Spectral Width λ RMS 0.85 nm OPTICAL RECEIVERS T A = Operating Temperature Range Parameter Symbol Minimum Typical Maximum Unit Optical Sensitivity P I -19.0-2.0 dbm Optical Wavelength λ IN 830 850 860 nm POWER SUPPLY CURRENT T A = Operating Temperature Range Parameter Symbol Minimum Typical Maximum Unit Supply Current I CCT 1500 2000 ma OPTICAL LINK DISTANCES Protocol Cable Specifi cation Distance Gigabit Ethernet - IEEE-802.3:2005-1000BASE-SX 62.5/125µ 200MHz*Km 275M 50/125µ 500MHz*Km 550M 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 3

OUTLINE DRAWING Flange Mount Option Dimensions are shown as: inches [mm] 1.9 [48.3] 1.7 [43.2] J1 = D38999/20xH21SN Equivalent See Appendix A1 for Mating Connector Details 1.7 [43.2] Panel 4-40 Thread 0.362 / [9.20] Depth 4 Places 2.0 to 24.0 [50.0 to 600] 38 AWG / 50 Ohm Ribbon Coax P1 = SAMTEC EQCD Series Mating Connector P/N: QSE-020-01-H-D-A Pin 2 Pin 1 Part Number = *W41F-5xxx-Hx-Lxxx *See page 6 for standard part number / cable length options 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 4

OUTLINE DRAWING Jam Nut Option Dimensions are shown as: inches [mm] 1.9 [48.3] 2.06 [52.4] J1 = D38999/24xH21SN Equivalent See Appendix A1 for Mating Connector Details 2.06 [52.4] Panel 2.0 to 24.0 [50 to 600] 38 AWG / 50 Ohm Ribbon Coax P1 = SAMTEC EQCD Series Mating Connector P/N: QSE-020-01-H-D-A Pin 2 Pin 1 Part Number = *W41J-5xxx-Hx-Lxxx *See page 6 for standard part number / cable length options 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 5

OUTLINE DRAWING Cable Length Options L 38AWG / 50Ohm Ribbon Coax Pin 2 Samtec EQCD Series Mating Connector: Samtec QSE-020-01-H-D-A Pin 1 Ribbon Coax Cable Length Options L (mm) +/- 6.0 ITEM # 50 xxxx-xxxx-xx-l050 100 xxxx-xxxx-xx-l100 150 xxxx-xxxx-xx-l150 200 xxxx-xxxx-xx-l200 250 xxxx-xxxx-xx-l250 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 6

J1 D38999 PIN and PORT ASSIGNMENTS TOP Optical Interface A N C X L E G J Front view of the D38999 optical insert shown, fiber optic cable plug opposite - see Appendix A1 for details MIL-DTL-38999 OPTICAL INTERFACE PORT NUMBER TX RX 0 J L 1 N G 2 X A 3 E C 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 7

PRINTED CIRCUIT BOARD FOOTPRINT Dimensions shown are: inches [mm] 0.365 [9.28] Samtec EQCD Series 2 1.339 [34.00] 0.113 [2.86] Pemnut S0-0318-04-01-02 per NAS1328-04-4E O 0.166 [4.22] NPTH (TYP) for KFE-440-4ET per NAS1328-04-4E 1 Samtec QSE-020 SMT PCB Layout GND Samtec EQCD PIN ASSIGNMENTS PIN # PORT # FUNCTION Input / Output RJ-45 PIN# Logic Family 1 4 MDA+ Input /Output 1 IEEE-802.3:2005 10/100/1000Base-T 3 4 MDA- Input / Output 2 IEEE-802.3:2005 10/100/1000Base-T 5 4 MDB+ Input /Output 3 IEEE-802.3:2005 10/100/1000Base-T 7 4 MDB- Input / Output 6 IEEE-802.3:2005 10/100/1000Base-T 9 4 MDC+ Input /Output 4 IEEE-802.3:2005 10/100/1000Base-T 11 4 MDC- Input / Output 5 IEEE-802.3:2005 10/100/1000Base-T 13 4 MDD+ Input /Output 7 IEEE-802.3:2005 10/100/1000Base-T 15 4 MDD- Input / Output 8 IEEE-802.3:2005 10/100/1000Base-T 17 0-4 *Reset_Low Input N/A LVTTL with Internal Pullup 19 0-4 V CC Input N/A N/A 20 0-4 V CC Input N/A N/A 21 0-4 V CC Input N/A N/A 22 0-4 V CC Input N/A N/A *Reset Function: Logic 0 Input = Restart, registers initialized; Logic 1, Open or High Z Input = Normal Operation, all other pins are N/C, center slug is GND 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 8

APPLICATION SCHEMATIC Panel Mounted Ethernet Switch Panel Mounted Ethernet Switch 1000Base-T Ethernet Interface RJ-45 Equiv Pin # MDA+ 1 MDA- 2 MDB+ 3 MDB- 6 MDC+ 4 MDC- 5 MDD+ 7 MDD- 8 Reset FPGA Fabric Logic Control LVTTL Vcc 0.01µF + 10.0µF Vcc= 5.0V 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 9

APPENDIX A1 MIL-DTL-38999 FIBER OPTIC CABLE PLUG / MIL-T-29504 PIN TERMINI *See DSCC or SAE QPL for Approved Suppliers http://www.dscc.dla.mil/programs/qmlqpl/qpldetail.asp?qpl=38999 *D38999 PLUG - PIN INSERT MS PLUG P/N MIL-DTL-38999 CABLE PLUG *D38999/26WH21PN *FIBER OPTIC PIN TERMINUS MIL-T-29504 PIN TERMINUS MS PIN TERMINUS P/N *M29504/04-xxxx** **defi ned by fi ber optic cable confi guration *CABLE PROTECTION CAP D38999/32 PLUG PROTECTION CAP MS PLUG CAP P/N *D38999/32W23N D38999 PLUG PORT FUNCTIONS PORT NUMBER TX RX 0 J L 1 N G 2 X A 3 E C TOP Optical Cable Plug Interface N A L X C J E G *CABLE BACKSHELL MIL-C-85049 CABLE BACKSHELL MS BACKSHELL P/N *MS85049/xxxxxx** Front face of the optical cable plug pin insert shown. Transceiver insert opposite. Pin Termini **Straight or angled backshell - defi ned by application / mounting confi guration 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 10 10

APPENDIX A2 PART NUMBER OPTIONS 4+1 Port, GbE, 850nm, Samtec Ribbon Coax Assembly W41 x - 5 S x T - H x x - L Shell Confi guration W41= 38999 Receptacle Shell Confi guration F = Square Flange J = Jam Nut # Channels (TX+RX) 5 = 4x 1000Base-SX + 1x 10/100/1000Base-T Wavelength S= 850nM Power Supply B = 6 to 24VDC C = 5.0VDC Fiber Optic Interface T = 1.25 Gbps Shell Size Code H = 23-21 D38999 Shell Plating F = NI W = OD CD / NI Z = ZN / NI Shell Polarization (leave blank) _ = N A = A B = B C = C D = D Electrical Interface L = Ribbon Coax to Samtec EQCD Series - Cable Length TBD Other wavelength, mounting and port count options are available. Please consult the Protokraft website for alternate confi gurations. 4545 West Stone Drive, Kingsport, TN 37660 USA PH: +1.423.578.7200 FX: +1.423.578.7201 EM: infomp@moog.com Web: www.protokraft.com 11 11