Test Results Summary for Cisco Wireless LAN Controller AireOS 8.2MR1 for Japan (Release Version AireOS )

Test Results Summary for Cisco Wireless LAN Controller AireOS 8.2MR1 for Japan (Release Version AireOS First Published: March 04, 2016 Last Modified: March 07, 2016 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number:

2016 Cisco Systems, Inc. All rights reserved.

CONTENTS CHAPTER 1 Overview 1 Cisco Wireless LAN Solution Test 1 CHAPTER 2 Test Topology and Environment Matrix 7 Test Topology 8 Component Matrix 8 What's New? 11 Resolved Caveats 11 CHAPTER 3 New Features - Test Summary 13 Smart Licensing 13 Hyperlocation AP Support 14 Cisco Wireless App 15 CHAPTER 4 Regression Features - Test Summary 19 WLC AireOS 19 Air-provisioning for UX APs 19 AP 1852 Basic Testing 20 AVC for Flexconnect 22 11ac CCX Lite 24 2700 Autonomous AP 25 3700 Autonomous AP 25 AAA 26 AAA Override 26 Anyconnect VPN 26 AVC Engine 27 DHCP Relay Options 27 Dot1x and WEB-Auth Support 28 iii

Contents Flexconnect Enhancements 28 Flexconnect on Mesh 29 Flexconnect Upgrade time reduction 29 HA Enhancements 30 High Availability 31 H-REAP Fault tolerance 32 HTTPS Support for Web-Auth 32 L2 Security 33 L3 Security 33 Link Aggregation Mode 33 MS Lync SDN API 34 NBAR 35 Multiple RADIUS Server Per SSID 35 Roaming 37 Secure FTP 37 Show run config 38 IOS-XE 38 11r Fast Roaming 38 AP Join 40 ISE 802.1x 44 Web Auth 44 DHCP IP Address 45 QoS / AVC for Jabber and Lync 45 NBAR2 46 Sleeping Client 46 Web UI/PI 46 CMX/MSE 47 Presence Analytics 47 Location Analytics 48 Visitor Management 48 Facebook WiFi 49 PI 49 NCS Maps 49 Autonomous to LWAPP Migration 49 HA Monitoring 50 iv

Contents Backup and restore 50 CME - Inputs 51 CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME 51 Updates to the ClientViewPage in Monitoring Dashboard 57 Client ping test and packet capture 57 Country code 58 NTP Servers 58 Software update using HTTP 59 CHAPTER 5 Adhoc Test cases 61 Adhoc Test Cases 61 CHAPTER 6 Related Documentation 63 Related Documentation 63 v

Contents vi

CHAPTER 1 Overview Cisco Wireless LAN Solution Test, page 1 Cisco Wireless LAN Solution Test Cisco Wireless LAN Solution Test, an integral part of the enterprise wireless solution, is a program that validates various Cisco Wireless Products and Features. This is achieved by testing the latest versions of Cisco wireless products. Cisco Wireless LAN Solution Test for Japan, in turn is an add-on testing at the solution level, where the requirements gathered are specific to Japanese usage and market. The requirements are derived based on the following: New features in 8.2 MR1 High priority scenarios and basic regression features Inputs from Cisco SEs/TAC The test execution is carried out on selected Cisco Wireless LAN products, which affect the Japanese segment that are prioritized by Cisco Japan team. The following products are covered in the test execution: Cisco Wireless LAN Controller 5500 Cisco Wireless LAN Controller 5520 Cisco Wireless LAN Controller 2500 Cisco Wireless LAN Controller 5760 Cisco Wireless LAN Flex Controller 7500 Cisco Wireless LAN Controller 8500 Cisco Wireless LAN Controller 8540 Cisco Catalyst 3850 Switch Cisco Catalyst 3650 Switch 1

Cisco Wireless LAN Solution Test Overview Mobility Express1850 Mobility Express1830 WiSM2 Controller Virtual Controller Access Point 3500 Access Point 1700 Access Point 1262 Access Point 3600 Access Point 3700 Access Point 2600 Access Point 1530 Access Point 1550 Access Point 1600 Access Point 2700 Access Point 1570 Access Point 702 Cisco OEAP 602 Access Point 1850 Access Point 1830 Cisco Prime Infrastructure (Physical-UCS,VM) ISE Virtual Appliance Cisco Secure ACS Cisco Mobility Service Engine (MSE) Connected Mobile Experiences (CMX) Cisco AnyConnect VPN Client Acronyms Acronym AAA ACL ACS AKM AP Authentication Authorization and Accounting Access Control List Access Control Server Authentication Key Management Access Point 2

Overview Cisco Wireless LAN Solution Test Acronym API AVC BGN BLE BYOD CA CAC CAPWAP CCKM CCN CCX CDP CKIP CME CMX CVBF CWA DCA DMZ DNS DTIM DSCP DTLS EAP EULA FLA FLS FT FTP FW HA Application Programming Interface Application Visibility and Control. Bridge Group Network Bluetooth Low Energy Bring Your Own Device Central Authentication Call Admissions Control Control and Provisioning of Wireless Access Point Cisco Centralized Key Management Channel Change Notification Cisco Compatible Extensions Cisco Discovery Protocol Cisco Key Integrity Protocol Cisco Mobility Express Connected Mobile Experience Cisco Vector Beam Forming Central Web Authentication Dynamic Channel Assignment Demilitarized Zone Domain Name System Delivery Traffic Indication Map Differentiated Services Code Point Datagram Transport Layer Security Extensible Authentication Protocol End User Licence Agreement Flex Local Authentication Flex Local Switching Fast Transition File Transfer Protocol Firm Ware High Availability 3

Cisco Wireless LAN Solution Test Overview Acronym H-REAP IOS ISE LAG LEAP LSS LWAPP MAP MCS MFP mdns MIC MSE MTU NAC NAT NBAR NCS NGWC NMSP OEAP PEAP PEM PI PMF POI PPPoE PSK QOS RADIUS RAP Hybrid Remote Edge Access Point Internetwork Operating System Identity Service Engine Link Aggregation Lightweight Extensible Authentication Protocol Location Specific Services Lightweight Access Point Protocol Mesh Access Point Modulation Coding Scheme Management Frame Protection multicast Domain Name System Message Integrity Check Mobility Service Engine Maximum Transmission Unit Network Admission Control Network Address Translation Network Based Application Recognition Network Control System Next Generation Wiring closet Network Mobility Services Protocol Office Extended Access Point Protected Extensible Authentication Protocol Policy Enforcement Module Prime Infrastructure Protected Management Frame Point of Interest Point-to-Point Protocol over Ethernet Pre-shared Key Quality of service Remote Authentication Dial-In User Service Root Access Point 4

Overview Cisco Wireless LAN Solution Test Acronym RP RRM SDN SOAP SFTP SNMP SS SSID SSO SSO TACACS TCP TFTP TLS UDP vwlc VPC VPN WEP WGB wips WiSM WLAN WLC WPA Redundancy Port Radio Resource Management Software Defined Networking Simple Object Access Protocol Secure File Transfer Protocol. Simple Network Management Protocol Spatial Stream Service Set Identifier Single Sign On Stateful Switch Over Terminal Access Controller Access Control System Transmission Control Protocol Trivial File Transfer Protocol Transport Layer Security User Datagram Protocol Virtual Wireless LAN Controller Virtual port channel Virtual Private Network Wired Equivalent Privacy Workgroup Bridge Wireless Intrusion Prevention System Wireless Service Module Wireless LAN Wireless LAN Controller Wi-Fi Protected Access 5

Cisco Wireless LAN Solution Test Overview 6

CHAPTER 2 Test Topology and Environment Matrix Test Topology, page 8 Component Matrix, page 8 What's New?, page 11 Resolved Caveats, page 11 7

Test Topology Test Topology and Environment Matrix Test Topology Figure 1: Topology In Use Component Matrix Category Controller Component Wireless LAN controller 5508 Wireless LAN Controller 5520 Flex Controller 7500 Wireless LAN controller 2500 Wireless LAN controller 8500 Wireless LAN controller 8540 WiSM2 Virtual Controller NGWC 5760 Version 8.2.110.0 8.2.110.0 8.2.110.0 8.2.110.0 8.2.110.0 8.2.110.0 8.2.110.0 8.2.110.0 03.07.03.E 8

Test Topology and Environment Matrix Component Matrix Applications Access Point Switch Antenna PI(Physical-UCS,VM) ISE(VM) Secure ACS(VM) CMX(Physical (3365), VM) MSE(Physical (3365), VM) Cisco Jabber for Windows, iphone MS Lync Cisco Air Provisioning App Cisco Wireless App Cisco AP 3500 Cisco AP 3600 Cisco AP 3700 Cisco AP 2600 Cisco AP 2700 Cisco AP 1600 Cisco AP 1700 Cisco AP 1850 Cisco AP 1830 Cisco AP 1262 Cisco OEAP 602 Cisco AP 702I Cisco AP 702W Cisco AP 1550 Cisco AP 1530 Cisco AP 1570 Cisco 3750V2 switch Cisco Cat 6509-E Cisco Cat 3850 Cisco Cat 3650 Hyperlocation 3.1.0.0.132 2.0 5.5.0.46 10.2 8.0.130.0 11.5.1 SDN API (2.0) 1.4 1.0.228 15.3 15.3 15.3 15.3 15.3 15.3 15.3 8.2.110.0 8.2.110.0 15.3 15.3 15.3 15.3 15.3 15.3 15.3 15.0(2)SE2 15.1(1)SY1 03.07.03.E 03.07.03.E NA 9

Component Matrix Test Topology and Environment Matrix Chipset Client Module Active Directory Call Control Browsers 5300, 6300 AGN 7260 AGN Airport Extreme Operating System(JOS) Apple Mac Book Pro, Apple Mac Book Air (JP Locale) ipad Pro iphone 5(JP Locale) iphone 6 (JP Locale) Samsung Galaxy S4 Wireless IP Phone 7925G End points Cisco AnyConnect VPN Client 11ac Module Hyperlocation Module AD Cisco Unified Communications Manager IE Opera Mozilla Firefox Safari Chrome 15.13.0.2 17.16.1.2 7.7 Windows 7 Enterprise Windows 8 & 8.1 Enterprise Windows XP Professional Windows 10 Mac OS 10.11.1 ios 9.2(13C75) ios 9.2(13C75) ios 9.2(13C75) Android 5.1.1 1.4.5.3 Windows 7 Enterprise Apple Mac OS 10.11.1 Windows 8.1 Samsung Galaxy S4 4.2.01022 NA NA Windows 2008R2 Enterprise 10.5.1-10000-7/10.5.1.1000-1(JP) 9,10,11 11.5 44.0 7.1.3 37,40 or later 10

Test Topology and Environment Matrix What's New? What's New? Smart Licensing Enhanced wips Support for Hyper Location Module with Advanced Security Cisco Wireless App Resolved Caveats CSCuy51343 CSCuy62177 Defect Telnet/SSH config for AP after upload/download config Not able to change the country code in ME GUI 11

Resolved Caveats Test Topology and Environment Matrix 12

CHAPTER 3 New Features - Test Summary Smart Licensing, page 13 Hyperlocation AP Support, page 14 Cisco Wireless App, page 15 Smart Licensing WLJ82MR1S_SL_01 Call Home and Smart license commands in CLI To verify the call home and smart license command config through WLC CLI WLJ82MR1S_SL_02 Call home and SL config persistence across WLC restart To verify the SL and CH config persistence after WLC restart WLJ82MR1S_SL_03 Call home and SL config persistence across WLC reboot To verify the SL and CH config persistence after WLC reboot WLJ82MR1S_SL_04 Installing token ID in WLC To check the token id installation in the WLC WLJ82MR1S_SL_05 WLC registration for Smart WLC Licensing has been registered successfully WLJ82MR1S_SL_06 WLC registration status after To verify the WLC WLC reboot registration status after WLC reboot WLJ82MR1S_SL_07 Call Home profile creation To verify the call home profile creation in WLC 13

Hyperlocation AP Support New Features - Test Summary WLJ82MR1S_SL_08 WLJ82MR1S_SL_09 WLJ82MR1S_SL_10 WLJ82MR1S_SL_11 WLJ82MR1S_SL_12 WLJ82MR1S_SL_13 WLJ82MR1S_SL_14 Enable of CH profile Entitlement of Apjoin/disjoin Entitlement of Apjoin after WLC reboot Smart licensing statistics Call Home statistics Clearing SL and CH stats Config upload/download of SL and CH To verify the enabling/disabling functionality of CH profile To verify the entitlement after AP join/disjoin To verify the entitlement of Apjoin after WLC reboot To verify the smart licnesing statistics To verify the CH statistics To verify the clear command for SL and CH works properly To verify the config upload/download of SL and CH configs Hyperlocation AP Support WLJ82MR1S_Enh_WIPS_01 Install the Hyperlocation module and associate with WLC the Hyperlocation module is able to install and associate with WLC successfully or not. WLJ82MR1S_Enh_WIPS_02 Viewing the AP's Hyperlocation module details from PI the Hyperlocation module details is detected and shown in External Module or not in PI WLJ82MR1S_Enh_WIPS_03 Viewing the AP's Hyperlocation Antenna details from PI the Hyperlocation Antenna is detected by PI as circular type in radio interfaces 14

New Features - Test Summary Cisco Wireless App WLJ82MR1S_Enh_WIPS_04 WLJ82MR1S_Enh_WIPS_05 PI Monitoring - WIPS PI triggers WIPS alarms from Hyperlocation enabled AP the PI detects alarms from Hyperlocation AP within 40 MHz to 80 MHz range or not PI triggers WIPS alarms for Hyperlocation enabled AP or not Cisco Wireless App WLJ82MR1S_Wrls_App_01 Adding a controller - Android Cisco Wireless APP a controller can be added to the Wireless App or not WLJ82MR1S_Wrls_App_02 Adding a controller - IOS Cisco Wireless APP a controller can be added to the Wireless App or not WLJ82MR1S_Wrls_App_03 Verifying Controller Host Name controller's Host name is displayed appropriately or not WLJ82MR1S_Wrls_App_04 Logging Out from the controller wireless app can be logged out or not WLJ82MR1S_Wrls_App_05 Monitoring Network Summary network summary can be monitored or not WLJ82MR1S_Wrls_App_06 Monitoring RF Summary - 2.4 GHz RF summary details for 2.4 GHz are shown appropriately or not WLJ82MR1S_Wrls_App_07 Monitoring RF Summary - 5 GHz RF summary details for 5 GHz are shown appropriately or not WLJ82MR1S_Wrls_App_08 Monitoring AP Performance - 2.4 GHz AP Performance details for 2.4 GHz are shown appropriately or not 15

Cisco Wireless App New Features - Test Summary WLJ82MR1S_Wrls_App_09 WLJ82MR1S_Wrls_App_10 WLJ82MR1S_Wrls_App_11 WLJ82MR1S_Wrls_App_12 WLJ82MR1S_Wrls_App_13 WLJ82MR1S_Wrls_App_14 WLJ82MR1S_Wrls_App_15 WLJ82MR1S_Wrls_App_16 WLJ82MR1S_Wrls_App_17 WLJ82MR1S_Wrls_App_18 WLJ82MR1S_Wrls_App_19 WLJ82MR1S_Wrls_App_20 Monitoring AP Performance - 5 GHz Monitoring Client Performance Monitoring Associated 2.4 GHz APs Monitoring Associated 5 GHz APs Search Tab - AP Monitoring Associated Clients - IP and User Name Monitoring Associated Clients - SSID and AP Name Search Tab - Clients General Ping Test using IP Client Ping Test from Client Monitoring Page Monitoring System Information - Model and Software Version Monitoring System Information - Time Zone and Country AP Performance details for 5 GHz are shown appropriately or not client Performance details are shown appropriately or not the 2.4 GHz AP details are fetched and displayed appropriately or not the 5 GHz AP details are fetched and displayed appropriately or not AP can be searched and found using the AP Name or not IP and Username is displayed correctly for the associated clients or not SSID name and AP name is displayed correctly for the associated clients are not Clients can be searched and found using its User Name or not ping test is working as expected or not the client ping test graph is shown appropriately or not the WLC model and software version is fetched and displayed properly or not Time Zone and Country information is fetched and displayed properly or not 16

New Features - Test Summary Cisco Wireless App WLJ82MR1S_Wrls_App_21 WLJ82MR1S_Wrls_App_22 Monitoring System Information - Redundancy Mode Monitoring System Information - System Time and Up Time Redundancy mode status is fetched and displayed properly or not System time and Up time information is fetched and displayed properly or not 17

Cisco Wireless App New Features - Test Summary 18

CHAPTER 4 Regression Features - Test Summary WLC AireOS, page 19 IOS-XE, page 38 CMX/MSE, page 47 PI, page 49 CME - Inputs, page 51 WLC AireOS Air-provisioning for UX APs WLJ82MR1S_1852_AirPro_01 1852 Universal AP the Initial Association with Universal1852 AP is 5500/2500 WLC associating to WLC or not WLJ82MR1S_1852_AirPro_02 1852 Universal AP the Initial Association with Universal 1852 AP is 7500/8500 WLC associating to WLC or not WLJ82MR1S_1852_AirPro_03 Priming 1852 Universal AP to a specific country domain using Apple iphone 5 the Universal 1852 AP can be primed manually for a specifid country domain or not 19

AP 1852 Basic Testing Regression Features - Test Summary WLJ82MR1S_1852_AirPro_04 WLJ82MR1S_1852_AirPro_05 WLJ82MR1S_1852_AirPro_06 WLJ82MR1S_1852_AirPro_07 WLJ82MR1S_1852_AirPro_08 WLJ82MR1S_1852_AirPro_09 WLJ82MR1S_1852_AirPro_10 Priming 1852 Universal AP to a specific country domain using Apple iphone 6 Priming 1852 Universal AP to a specific country domain using Android smart phone Reseting configurations on CAPWAP 1852 AP Priming Autonomous 1852 Universal AP using iphone 5 Priming Autonomous 1852 Universal AP using iphone 6 Priming Autonomous 1852 Universal AP using android smart phone application Reseting configurations on Autonomous 1852 AP the Universal 1852 AP can be primed manually for a specifid country domain or not the Universal 1852 AP can be primed manually for a specifid country domain or not reset configurations works perfectly or not for CAPWAP 1852 AP Autonomous 1852 AP can be primed using iphone 5 Autonomous 1852 AP can be primed using iphone 6 Autonomous 1852 AP can be primed using Andriod smart phone application reset configurations works perfectly or not for Autonomous 1852 AP AP 1852 Basic Testing WLJ82MR1S_AirPro_238 UX AP1700 joining with Mobility Express AP1852 UX AP1700 has been associated to ME1852 WLJ82MR1S_AirPro_239 UX AP2700 joining with Mobility Express AP1852 UX AP2700 has been associated to ME1852 20

Regression Features - Test Summary AP 1852 Basic Testing WLJ82MR1S_AirPro_240 WLJ82MR1S_AirPro_241 WLJ82MR1S_AirPro_242 WLJ82MR1S_AirPro_243 WLJ82MR1S_AirPro_244 WLJ82MR1S_AirPro_245 WLJ82MR1S_AirPro_246 WLJ82MR1S_AirPro_247 WLJ82MR1S_AirPro_248 UX AP3700 joining with Mobility Express AP1852 Priming of UX AP1700 to a specific Regulatory domain using iphone. Priming of UX AP2700 to a specific Regulatory domain using iphone. Priming of UX AP3700 to a specific Regulatory domain using iphone. Priming of UX AP1700 to a specific Regulatory domain using Android. Priming of UX AP2700 to a specific Regulatory domain using Android phone Priming of UX AP3700 to a specific Regulatory domain using Android phone Primed AP back to Universal mode- AP1700 Primed AP back to Universal mode- AP2700 UX AP3700 has been associated to ME1852 the Universal 1700 AP joined to ME can be primed manually for a specifid country domain or not the Universal 2700 AP joined to ME can be primed manually for a specified country domain or not the Universal 3700 AP joined to ME can be primed manually for a specified country domain or not the Universal 1700 AP joined to ME can be primed manually for a specified country domain or not the Universal 2700 AP joined to ME can be primed manually for a specified country domain or not the Universal 3700 AP joined to ME can be primed manually for a specified country domain or not To verify the reverting back to Universal AP 1700 To verify the reverting back to Universal AP 2700 21

AVC for Flexconnect Regression Features - Test Summary WLJ82MR1S_AirPro_249 Primed AP back to Universal mode- AP3700 To verify the reverting back to Universal AP 3700 AVC for Flexconnect WLJ82MR1S_flex AVC_11 View flexconnect AVC protocol pack version To check whether flexconnect avc protocol pack version is showing on wlc cli or not. WLJ82MR1S_flex AVC_12 View a flexconnect AVC profiles created flexconnect AVC profiles are able to view successfully or not. WLJ82MR1S_flex AVC_13 Create rules for flexconnect AVC profile rules (drop, mark, ratelimit) are able to create and apply for flexconnect avc profile successfully or not. WLJ82MR1S_flex AVC_14 View a detailed information about flex group name. a detailed information about the specified flex group name is able to view successfully from WLC CLI or not. WLJ82MR1S_flex AVC_15 Check only locally switched wlans are showing in flexconnect group for wlan-avc mapping. only locally switched wlans are showing in flex group for wlan-avc mapping or not. WLJ82MR1S_flex AVC_16 Configure AVC visibility as WLAN specific in flex group AVC visibility is able to configure as wlan specific for the locally switched wlan in flex group successfully from WLC CLI or not. 22

Regression Features - Test Summary AVC for Flexconnect WLJ82MR1S_flex AVC_17 WLJ82MR1S_flex AVC_18 WLJ82MR1S_flex AVC_19 WLJ82MR1S_flex AVC_20 WLJ82MR1S_flex AVC_21 WLJ82MR1S_flex AVC_22 WLJ82MR1S_flex AVC_23 Apply AVC profile for the wlan-specific locally switched wlan in flex group. Remove WLAN-AVC mapping from the flex group Associate wireless clients when flex group AVC is enabled with avc profile and WLAN avc visibility is enabled with different avc profile. Associate two wireless clients to two different flex groups with different AVC configuration and check clients AVC statistics Switch Wlan with AVC profile from Local to Central and see flex avc config is removed. View the interhit-level of flex avc for wlan in the specified flex ap. Intra flex group roaming - AVC in WLAN-specific. avc profile is not able to apply for the WLAN-specific locally switched wlan in flex group successfully or not WLAN-AVC mappings is able to delete from flex group successfully or not. wireless clients are able to asscoiate and flex group avc profile should be applied successfully or not, when flex group AVC is enable with avc profile and WLAN avc visibility is enabled with different avc profile. two wireless clients are able to associate and able to get avc statistics based on avc config in flex group changing wlan with AVC profile from local to central switching is removing flex avc config from wlan and flex group successfully or not. the flex AP in flex group shows the inherit-level of flex-avc mappings for wlan correctly or not. intra flex group roaming for AVC with Wlan-specific is working successfully or not 23

11ac CCX Lite Regression Features - Test Summary WLJ82MR1S_flex AVC_24 WLJ82MR1S_flex AVC_25 WLJ82MR1S_flex AVC_26 WLJ82MR1S_flex AVC_27 shutdown the AP radio and check AVC statistics. Upgrade WLC and AP code with AVC on flex configuration Download and upload WLC config with AVC on flex Upgrade Protocol pack on WLC. AVC statistics is cleared successfully or not, when AP's radio is shutdown. AVC for Flex configuration is maintained after upgrading WLC and AP images or not AVC on flex config is maintained and client able to associate after downloading and uploading WLC config. AVC on Flex is working well after upgrading the protocol pack to the latest version on WLC or not. 11ac CCX Lite WLJ82MR1S_11AC_CCX_28 Initial Client association with CCKM enabled-macbook Pro To verify the initial client association with CCKM enabled- Macbook Pro WLJ82MR1S_11AC_CCX_29 Fast reauthenctication of 11ac client with CCKM enabled-samsung S4 To verify the Fast reauthentication of Samsung S4 with CCKM enabled under roaming conditions- Samsung S4 WLJ82MR1S_11AC_CCX_30 Fast reauthenctication of 11ac client with CCKM enabled-macbook Pro To verify the Fast reauthentication of Samsung S4 with CCKM enabled under roaming conditions- Macbook Pro 24

Regression Features - Test Summary 2700 Autonomous AP WLJ82MR1S_11AC_CCX_31 WLJ82MR1S_11AC_CCX_32 Fast reauthenctication of 11ac client with CCKM enabled-netgear client EAP-FAST dot1x authentication with 11ac client Macbook Pro To verify the Fast reauthentication of Samsung S4 with CCKM enabled under roaming conditions- Netgear client To verify EAP-FAST dot1x authentication in 11ac interface-macbook Pro 2700 Autonomous AP WLJ82MR1S_2700AAP_33 Autonomous AP management access Verify the Autonomous AP management access WLJ82MR1S_2700AAP_34 Traffic flow between two wireless clients To Traffic flow between two wireless clients WLJ82MR1S_2700AAP_35 Trap logs for connected client To verify the Trap Logs for connected client WLJ82MR1S_2700AAP_36 Monitoring of connected client To verify the connected client in AP management page 3700 Autonomous AP WLJ82MR1S_3700AAP_37 Client Association with AES-CCMP Verify client association WLJ82MR1S_3700AAP_38 Client Association with Local radius server Verify client association WLJ82MR1S_3700AAP_39 Data rates change Verify the client association after changing the data rates WLJ82MR1S_3700AAP_40 Trap logs for connected client To verify the Trap Logs for connected client 25

AAA Regression Features - Test Summary AAA WLJ81MR1S_AAA_41 Performing MAC Filtering with Clients registered in ACS server To check whether registered client is successfully authenticated and associated with WLANS enabled MAC Filtering AAA Override WLJ82MR1S_AAA_Override_42 Verify AVC profile AAA override from authentication server when wlan is configured for mac filtering This is to verify that AVC profile is applied using AAA override from authentication server when the wlan is configured for mac filtering WLJ82MR1S_AAA_Override_43 Check if after re-authentication AVC profile is still applied to the client. This is to verify that AVC profile is applied using AAA override from authentication server even after session timeout is expired. Anyconnect VPN WLJ82MR1S_Any_44 WPA+WPA2 network(anyconnect) in client To check whether the Anyconnect VPN is connecting or not using WPA+WPA2 layer2 security 26

Regression Features - Test Summary AVC Engine WLJ82MR1S_Any_45 WLJ82MR1S_Any_46 Static WEP network(anyconnect) in client Layer 2 security None for open auth (AnyConnect) in client To check whether the AnyConnect VPN is connecting or not, using Static WEP layer2 security. To check whether the AnyConnect VPN is connect or not using "None" Layer 2 security AVC Engine WLJ82MR1S_AVC_47 Verify AVC classifies multiple applications for multiple clients associated to a single WLC This is to verify that after upgrade to 8.2 multiple applications for multiple clients are classified as expected. DHCP Relay Options WLJ82MR1S_DHCP_48 DHCP relay option with HA in WLC To check if DHCP relay option with HA. Ensure that the relay options configurations are synced to the standby WLC in WLC WLJ82MR1S_DHCP_49 L2/L3 Roaming with DHCP relay options in WLC To check if the L2 intra controller works with DHCP relay option 82 enabled in WLC WLJ82MR1S_DHCP_50 Configuration of DHCP Relay options - VPN id or VRF selection option in WLC To check if DHCP relay option 82 with vpn id /VRF select suboption 151 & 152 is enabled via CLI in WLC 27

Dot1x and WEB-Auth Support Regression Features - Test Summary Dot1x and WEB-Auth Support WLJ82MR1S_Web_51 Authentication of client(apple Mac Book) with Security Static WEP and Web-Auth -2500,5508, WiSM2 and 7500 Controller. Checking for the Authentication of the client when connected to a WLAN in which Static WEP and Web-Auth is enabled. WLJ82MR1S_Web_52 Authentication of clients(apple Mac Book & Win 7) with Security Static WEP+Dot1x and Web-Auth using ISE-2500,5508, WiSM2 and 7500 Controller. Checking for the Authentication of the clients when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is enabled. WLJ82MR1S_Web_53 Authentication of clients(apple Mac Book & Win 7) with Security Dot1x using ISE and WebAuth-2500,5508,WiSM2 and 7500 Controller. Checking for the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is enabled. Flexconnect Enhancements WLJ82MR1S_Flex_Enhan_54 WGB client deregistration with the flexconnect in standalone mode to connected mode the WGB disassociates from the controller upon deletion WLJ82MR1S_Flex_Enhan_55 Flexconnect AP reload in connected mode when WGB is associated-central auth locally switched WGB and WGB clients re-associates to the controller after flexconnect AP reloads WLJ82MR1S_Flex_Enhan_56 Flexconnect AP reload in standalone mode when WGB is associated-local authentication WGB and WGB clients re-associates to the controller after flexconnect AP reloads 28

Regression Features - Test Summary Flexconnect on Mesh WLJ82MR1S_Flex_Enhan_57 WGB Clients roaming to a different flexconnect on the same controller To verify the WGB client reassociates successfully to a different flexconnect after roaming within the controller Flexconnect on Mesh WLJ82MR1S_Flex_Mesh_58 AP conversion from Flexconnect to Flex+bridge mode for RAP/MAP changing the mode from flexconnect to Flex+bridge works properly for RAP/MAP WLJ82MR1S_Flex_Mesh_59 Client status when Flex+bridge AP is in standalone mode To verify the client status Flexconnect Upgrade time reduction WLJ82MR1S_Flex_Change_60 Client authentication with AP after mode change to flexconnect_central Switching client has been successfully authenticated after AP mode has been changed to flexconnect with central switching WLAN WLJ82MR1S_Flex_Change_61 Client authentication with AP after mode change to flexconnect_local Switching,Central auth client has been successfully authenticated after AP mode has been changed to flexconnect with local switching, central auth WLAN WLJ82MR1S_Flex_Change_62 Client association with AP in standalone mode and FT client has been associated successfully to AP in standalone mode and fault tolerance 29

HA Enhancements Regression Features - Test Summary WLJ82MR1S_Flex_Change_63 WLJ82MR1S_Flex_Change_64 WLJ82MR1S_Flex_Change_65 Client association with AP reboot in connected/standalone mode Mode change from local > flex > local Mode change to flexconnect then to submode wips To verify the client association with AP reboot in connected/standalone mode, for AP converted to flex changing the mode from local > flex > local for few times are working properly To verify the mode change to flexconnect and then to WIPS HA Enhancements WLJ82MR1S_HA_Enh_66 Internal DHCP config sync in Standby-Hot the Internal DHCP config through Active CLI/GUI is synced to the Standby-Hot WLC in a HA pair WLJ82MR1S_HA_Enh_67 Internal DHCP config in new Active To verify the Internal DHCP config in new Active WLC. WLJ82MR1S_HA_Enh_68 Client obtaining IP through Internal DHCP config the client obtaining IP address from the Internal DHCP config WLJ82MR1S_HA_Enh_69 Client connected to corporate SSID after switchover To verify the client connected to Corporate SSID after switchover WLJ82MR1S_HA_Enh_70 Client connected to personal SSID after switchover To verify the client connected to Personal SSID after switchover WLJ82MR1S_HA_Enh_71 Client SSO with OEAP To verify the client SSO with OEAP WLJ82MR1S_HA_Enh_72 Voice client connected to OEAP after switchover To verify the voice client status connected to OEAP after switchover 30

Regression Features - Test Summary High Availability High Availability WLJ82MR1S_HA_73 Bringing HA pair up- WLC 5508 /7500 the HA pair(active:standby) is up successfully WLJ82MR1S_HA_74 Controller HA pair with different hardware models To verify the role negotiation between the controllers with different hardware models WLJ82MR1S_HA_75 Controller HA pair with different software versions To verify the role negotiation between the controllers with different software versions WLJ82MR1S_HA_76 Controller mode when the redundancy port loses connectivity To verify the HA pair controller modes after disconnecting the redundancy port WLJ82MR1S_HA_77 Controller mode when the Gateway is not reachable to the STANDBY controller To verify the HA pair controller modes when the Gateway is not reachable from the STANDBY controller WLJ82MR1S_HA_78 Controller mode when the Gateway is not reachable to the ACTIVE controller To verify the HA pair controller modes when the Gateway is not reachable from the ACTIVE controller WLJ82MR1S_HA_79 Controller mode when the Gateway is not reachable to the both controller To verify the HA pair controller modes when the Gateway is not reachable to both the controllers WLJ82MR1S_HA_80 Controller modes(ha pair) after power failure To verify the controller modes after power failure on both the controllers WLJ82MR1S_HA_81 HA mode after resetting the peer system from ACTIVE To verify the HA mode after resetting the peer system from ACTIVE controller 31

H-REAP Fault tolerance Regression Features - Test Summary WLJ82MR1S_HA_82 Client status during AP SSO after active failover-web Authentication To check whether the Client gets disassociated and forced to re-join to the controller after AP SSO H-REAP Fault tolerance WLJ82MR1S_Fault_83 HREAP fault tolerance between connected and standalone AP-2.4 GHz the client associated to flexconnect AP will get reassociated in case of fault tolerance WLJ82MR1S_Fault_84 HREAP fault tolerance between standalone and connected AP-2.4 GHz the client associated to flexconnect AP will get reassociated in case of fault tolerance HTTPS Support for Web-Auth WLJ82MR1S_HTTPS_85 Associating two clients to web-auth security and checking the redirection of HTTPS url in both clients in WLC's. To check whether HTTPS url gets redirected or not to web-auth login page when clients gets connected and browses the internet and also checking the Ping function works or not between them. WLJ82MR1S_HTTPS_86 Associating two clients to web-auth security and checking the redirection of HTTPS url in both clients in WLC's. To check whether HTTPS url gets redirected or not to web-auth login page when clients gets connected and browses the internet and also checking the Ping function works or not between them. 32

Regression Features - Test Summary L2 Security L2 Security WLJ82MR1S_L2 security_87 Associating 7925G IP phone - WPA To check whether the 7925G ip phone is associated successfully into the network through WPA authentication method WLJ82MR1S_L2 security_88 Authentication for the association of clients-wpa in WLC Checking for the Authentication of the clients when connected to an AP in WLC. L3 Security WLJ82MR1S_L3security_89 Configuring Customized (Downloaded) web-auth using NCS To check the Customized (Downloaded) web-auth configuration in NCS reflects in WLC. WLJ82MR1S_L3security_90 Downloading the customized login page To verify the successful download of customized login page WLJ82MR1S_L3security_91 Customized web login page for the controller To verify the successful customized web login page with internal authentication Link Aggregation Mode WLJ82MR1S_LAG_92 Client Association with Light Weight Access Point after Link Aggregation failover To verify the successful association of wireless client with Light Weight Access Point 33

MS Lync SDN API Regression Features - Test Summary WLJ82MR1S_LAG_93 Active controller ports status when it is in Link Aggregation (LAG) failover To check active controller ports status in Link Aggregation failover MS Lync SDN API WLJ82MR1S_Lync_SDN_94 Lync voice call establishment between wireless and wired client To check whether Active Lync Audio calls between Wired and Wireless clients are shown in WLC Monitor tab or not WLJ82MR1S_Lync_SDN_95 Lync video call establishment between wireless and wired client To check whether Active Lync video calls between Wired and Wireless clients are shown in WLC Monitor tab or not WLJ82MR1S_Lync_SDN_96 Dropping Lync Video calls using AVC To check whether the ms-lync-video traffic is blocked or not when AVC is enabled in WLAN WLJ82MR1S_Lync_SDN_97 Dropping Lync audio calls using AVC To check whether the ms-lync-audio traffic is blocked or not when AVC is enabled in WLAN WLJ82MR1S_Lync_SDN_98 Audio call Rate limit setting usage limit can be imposed on Audio call or not using AVC profile WLJ82MR1S_Lync_SDN_99 Video call Rate limit setting usage limit can be imposed on video call or not using AVC profile 34

Regression Features - Test Summary NBAR NBAR WLJ82MR1S_NBAR_100 Apply an AVC profile with a rule to block an application and check if that application is dropped when tried to open and notification is send via snmp trap To verify AVC rule to drop an application works fine WLJ82MR1S_NBAR_101 application traffic flow from client to AP when AP in local mode and centrally switched flexconnect - 5508,7500 &2500 WLC To verify the IP traffic flow from client to AP when AP is in local mode and centrally switched flexconnect WLJ82MR1S_NBAR_102 Override Per-user bandwidth contract on downstream and upstream traffic To verify if Override Per-user bandwidth contract on downstream and upstream traffic works fine Multiple RADIUS Server Per SSID WLJ82MR1S_MUL_RAD_103 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured (Primary) - 2500,5508,WiSM2 and 7500 WLC Dot1x authentication can be performed successfully to the clients associated via the Primary RADIUS server over the PPPoE connection with the Vlan mapped 35

Multiple RADIUS Server Per SSID Regression Features - Test Summary WLJ82MR1S_MUL_RAD_104 WLJ82MR1S_MUL_RAD_105 WLJ82MR1S_MUL_RAD_106 WLJ82MR1S_MUL_RAD_107 WLJ82MR1S_MUL_RAD_108 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured (Secondary) - 2500,5508,WiSM2 and 7500 WLC Performing Dot1x authentication over PPPoE AP with RADIUS servers configured (Primary failover) - 2500,5508, WiSM2 and 7500 WLC Performing Dot1x authentication over FlexConnect AP with RADIUS servers configured (Primary) - 2500,5508,WiSM2 and 7500 WLC Performing Dot1x authentication over FlexConnect AP with RADIUS servers configured (Secondary) - 2500,5508,WiSM2 and 7500 WLC Performing Dot1x authentication over FlexConnect AP with RADIUS servers configured (Primary failover) - 2500,5508, WiSM2 and 7500 WLC Dot1x authentication can be performed successfully to the clients associated via the secondary RADIUS server over the PPPoE connection with the Vlan mapped Dot1x authentication can be performed successfully to the clients associated via the secondary RADIUS server over the PPPoE connection with the Vlan mapped Dot1x authentication can be performed successfully to the clients associated via the Primary RADIUS server over the Flex AP connection with the Vlan mapped Dot1x authentication can be performed successfully to the clients associated via the secondary RADIUS server over the Flex AP connection with the Vlan mapped Dot1x authentication can be performed successfully to the clients associated via the secondary RADIUS server over the Flex AP connection with the Vlan mapped 36

Regression Features - Test Summary Roaming Roaming WLJ82MR1S_Roaming_109 11r Client Association with AKM PSK - FlexConnect Central Switch To verify client's initial association to a wlan with 11r enabled with ft-psk AKM Suite in flexconnect central switching. WLJ82MR1S_Roaming_110 11r Client Association with AKM PSK - FlexConnect Local Switch Central Auth Verify client's initial association to a wlan with 11r enabled with ft-psk AKM Suite in flexconnect local switch central auth. WLJ82MR1S_Roaming_111 Over the Air Intra-controller roaming - flexconnect Central Switch To verify fast transition client roaming over the air within the same controller in flexconnect central auth. WLJ82MR1S_Roaming_112 Over the DS Intra-controller roaming - Flexconnect Central Switch VLAN Pooling Verify fast transition client roaming over the DS within the same controller in flexconnect central switch. WLJ82MR1S_Roaming_113 Roaming of wireless data clients within APs of one Flex connect group when controller is Down. To check for the successful and seamless roaming of wireless data clients between APs of same Flex connect group when controller is "Down". Secure FTP 37

Show run config Regression Features - Test Summary WLJ82MR1S_SEC_FTP_114 WLJ82MR1S_SEC_FTP_115 WLJ82MR1S_SEC_FTP_116 Transfer download of controller certificates with SFTP method - WLC Virtual and 7500 SFTP Transfer validation with other configuration items like, path, filename, server ip and port number - All Controllers Transfer upload of other data type files with SFTP method - WLC 5500 series, 2500 and WiSM2 To verify controller is able to download all the supported certificates using SFTP transfer method Verify controller validates properly the transfer parameters like server ip address, Port number, filename, and path. Transfer is aborted if any of the above configuration parameters are in-correct or server issues - All controllers To verify controller is able to upload all the other supported data type files using SFTP transfer method- WLC 5500, 2500 & WiSM2. Show run config WLJ82MR1S_SHW_CON_117 Show _ run-config _ commands for WLC To check the format of show run-config commands for WLC WLJ82MR1S_SHW_CON_118 Show _ run - config _ startup- commands for WLC To check that the command is working without error from WLC IOS-XE 11r Fast Roaming 38

Regression Features - Test Summary 11r Fast Roaming WLJS37E3_11R_119 WLJS37E3_11R_120 WLJS37E3_11R_121 WLJS37E3_11R_122 WLJS37E3_11R_123 WLJS37E3_11R_124 WLJS37E3_11R_125 WLJS37E3_11R_126 WLJS37E3_11R_127 WLJS37E3_11R_128 WLJS37E3_11R_129 Creating Sub-Domains with multiple MCs Roaming scenario: L2 Roam_Intra-SPG, Intra-switch(MA) L2 roaming: Inter-SPG, Intra-SD in NGWC L3 roaming: Inter-SPG, Intra-SD in NGWC L2 roaming across the Sub-domains between MA in NGWC L3 roaming: Inter-SD between MA in NGWC L2 Roam check with new mobility architecture in legacy devices- Intra-switch within SPG L3 roam check with legacy controller within SPG L2 roam check across SPG in legacy controller L3 roam check across SPG in legacy controller Roam check when switch is in stack To verify the multiple Sub-domain configuration To verify the seamless roaming of stations within MA To verify the L2 seamless roaming of stations across SPGs within the same sub-domain To verify the L3 roaming of stations between MAs (Anchor > Foreign) acroos the SPG within the Sub-domain. To verify the seamless roaming of wireless stations across Sub-domains between the MAs To verify the L3 roaming of wireless stations between MAs(Anchor and Foreign) across Sub-domains To verify the L2 seamless roaming of wireless stations within SPG intra-switch in legacy WLC To verify the L3 roaming across MAs in legacy controller To verify the seamless roaming of stations across SPG(inter-SPG) within legacy controller To verify the L3 roaming across SPGs in legacy controllers Checking the roaming scenario when MA is in stack 39

AP Join Regression Features - Test Summary WLJS37E3_11R_130 Roam check when controller is in HA mode Checking the IRCM roaming of stations when WLC is in HA mode. AP Join WLJS37E3_AP_131 AP 700 join with NGWC device AP700 can be able to join with NGWC device WLJS37E3_AP_132 AP 700 status monitoring To verify the AP join stats, radio status and other information of AP700 WLJS37E3_AP_133 Q domain support for AP 700 AP700- Q can join NGWC device WLJS37E3_AP_134 AP 700 join with NGWC device AP700 can be able to join with NGWC device WLJS37E3_AP_135 AP 700 status monitoring To verify the AP join stats, radio status and other information of AP700 WLJS37E3_AP_136 AP 1700 join with NGWC device AP1700 can be able to join with NGWC device WLJS37E3_AP_137 AP 1700 status monitoring To verify the AP join stats, radio status and other information of AP1700 WLJS37E3_AP_138 Q domain support for AP 1700 AP1700- Q can join NGWC device WLJS37E3_AP_139 AP 1700 join with NGWC device AP1700 can be able to join with NGWC device WLJS37E3_AP_140 AP 1700 status monitoring To verify the AP join stats, radio status and other information of AP1700 40

Regression Features - Test Summary AP Join WLJS37E3_AP_141 AP 3500 join with NGWC device AP3500 can be able to join with NGWC device WLJS37E3_AP_142 AP 3500 status monitoring To verify the AP join stats, radio status and other information of AP3500 WLJS37E3_AP_143 AP 3600 join with NGWC device AP3600 can be able to join with NGWC device WLJS37E3_AP_144 AP 3600 status monitoring To verify the AP join stats, radio status and other information of AP3600 WLJS37E3_AP_145 Q domain support for AP 3600 AP3600- Q can join NGWC device WLJS37E3_AP_146 AP 3600 join with NGWC device AP3600 can be able to join with NGWC device WLJS37E3_AP_147 AP 3600 status monitoring To verify the AP join stats, radio status and other information of AP3600 WLJS37E3_AP_148 AP 3700 join with NGWC device AP3700 can be able to join with NGWC device WLJS37E3_AP_149 AP 3700 status monitoring To verify the AP join stats, radio status and other information of AP3700 WLJS37E3_AP_150 Q domain support for AP 3700 AP3700- Q can join NGWC device WLJS37E3_AP_151 AP 3700 join with NGWC device AP3700 can be able to join with NGWC device WLJS37E3_AP_152 AP 3700 status monitoring To verify the AP join stats, radio status and other information of AP3700 41

AP Join Regression Features - Test Summary WLJS37E3_AP_153 AP 2600 join with NGWC device AP2600 can be able to join with NGWC device WLJS37E3_AP_154 AP 2600 status monitoring To verify the AP join stats, radio status and other information of AP2600 WLJS37E3_AP_155 Q domain support for AP 2600 AP2600- Q can join NGWC device WLJS37E3_AP_156 AP 2600 join with NGWC device AP2600 can be able to join with NGWC device WLJS37E3_AP_157 AP 2600 status monitoring To verify the AP join stats, radio status and other information of AP2600 WLJS37E3_AP_158 AP 2700 join with NGWC device AP2700 can be able to join with NGWC device WLJS37E3_AP_159 AP 2700 status monitoring To verify the AP join stats, radio status and other information of AP2700 WLJS37E3_AP_160 Q domain support for AP 2700 AP2700- Q can join NGWC device WLJS37E3_AP_161 AP 2700 join with NGWC device AP2700 can be able to join with NGWC device WLJS37E3_AP_162 AP 2700 status monitoring To verify the AP join stats, radio status and other information of AP2700 WLJS37E3_AP_163 AP 1530 join with NGWC device AP1530 can be able to join with NGWC device WLJS37E3_AP_164 AP 1530 status monitoring To verify the AP join stats, radio status and other information of AP1530 42

Regression Features - Test Summary AP Join WLJS37E3_AP_165 Q domain support for AP 1530 AP1530- Q can join NGWC device WLJS37E3_AP_166 AP 1530 join with NGWC device AP1530 can be able to join with NGWC device WLJS37E3_AP_167 AP 1530 status monitoring To verify the AP join stats, radio status and other information of AP1530 WLJS37E3_AP_168 AP 1570 join with NGWC device AP1570 can be able to join with NGWC device WLJS37E3_AP_169 AP 1570 status monitoring To verify the AP join stats, radio status and other information of AP1570 WLJS37E3_AP_170 Q domain support for AP 1570 AP1570- Q can join NGWC device WLJS37E3_AP_171 AP 1570 join with NGWC device AP1570 can be able to join with NGWC device WLJS37E3_AP_172 AP 1570 status monitoring To verify the AP join stats, radio status and other information of AP1570 WLJS37E3_AP_173 AP 1600 join with NGWC device AP1600 can be able to join with NGWC device WLJS37E3_AP_174 AP 1600 status monitoring To verify the AP join stats, radio status and other information of AP1600 WLJS37E3_AP_175 Q domain support for AP 1600 AP1600- Q can join NGWC device WLJS37E3_AP_176 AP 1600 join with NGWC device AP1600 can be able to join with NGWC device WLJS37E3_AP_177 AP 1262 join with NGWC device AP1262 can be able to join with NGWC device 43

ISE 802.1x Regression Features - Test Summary WLJS37E3_AP_178 Q domain support for AP 1262 AP1262- Q can join NGWC device WLJS37E3_AP_179 AP 1262 join with NGWC device AP1262 can be able to join with NGWC device WLJS37E3_AP_180 AP 1262 status monitoring To verify the AP join stats, radio status and other information of AP1262 ISE 802.1x WLJS37E3_ISE_Dot1x_181 Client connectivity to NGWC (5760/3850/3650) devices with L2 security type - 802.1x using ISE To verify the client connectivity with L2 security type 802.1x to ct3850/3650 WLJS37E3_ISE_Dot1x_182 Client connectivity to NGWC (5760/3850/3650) devices with L2 security type - wpa2+802.1x using ISE To verify the client connectivity with L2 security type wpa2+802.1x to ct3850/3650 WLJS37E3_ISE_Dot1x_183 Associating clients to NGWC (5760) device with different EAP types - 802.1x using ISE To verify the client connectivity with different EAP methods(peap & LEAP) to ct5760 WLJS37E3_ISE_Dot1x_184 Associating clients to NGWC (3850/3650) device with different EAP types - 802.1x using ISE To verify the client connectivity with different EAP methods(peap & LEAP) to ct3850/3650 Web Auth 44

Regression Features - Test Summary DHCP IP Address WLJS37E3_Web_Auth_185 Client connectivity to NGWC (5760/3850/3650) devices with L3 security type - default web auth To verify the client connectivity with L3 security type default web-auth WLJS37E3_Web_Auth_186 Client connectivity to NGWC (5760/3850/3650) devices with L3 security type - customized web auth To verify the client connectivity with L3 security type customized web-auth DHCP IP Address WLJS37E3_DHCP_187 Associating clients to a WLAN with DHCP server configured in ct3850/3650 client gets ip or not from DHCP server configured in WLAN with L2 security configured in ct3850/3650. WLJS37E3_DHCP_188 Associating clients to a WLAN with only DHCP assignment checkbox enabled in ct5760/3850/3650 client gets ip or not when trying to associate with a WLAN in ct5760/3850/3650. WLJS37E3_DHCP_189 Checking the functionality of DHCP snooping in ct3850/3650. DHCP snooping works or not in ct3850/3650 QoS / AVC for Jabber and Lync WLJS37E3_AVC_196 Classification of traffic verification with APs- Cisco Jabber To verify the cisco jabber traffic classification with AP3700 45

NBAR2 Regression Features - Test Summary WLJS37E3_AVC_197 Classification of traffic verification with APswebex meetings To verify the cisco webex meeting traffic classification with AP3700 NBAR2 WLJS37E3_NBAR2_198 NBAR functionality with local AP To verify the NBAR functionality with AP local mode WLJS37E3_NBAR2_199 NBAR functionality with a/b/g/n Radio policy To verify the NBAR functionality with a/b/g/n radio policy Sleeping Client WLJS37E3_sleep_client_200 Sleeping client wake up after timeout expires with internal web-auth To verify sleeping client functionality waking up after idle timeout WLJS37E3_sleep_client_201 Sleeping client wake up after timeout expires with external web-auth To verify sleeping client functionality waking up after idle timeout WLJS37E3_sleep_client_202 Sleeping client wake up before timeout expires with internal web-auth To verify sleeping client functionality waking up before idle timeout WLJS37E3_sleep_client_203 Sleeping client wake up before timeout expires with external web-auth To verify sleeping client functionality waking up before idle timeout Web UI/PI 46

Regression Features - Test Summary CMX/MSE WLJS37E3_WEB_UI_204 WLJS37E3_WEB_UI_205 WLJS37E3_WEB_UI_206 WLJS37E3_WEB_UI_207 Configuring ct5760 through Wizard- Supported browsers in JOS Configuring c3850 through Wizard- Supported browsers in JOS Configuring AP groups via WLC GUI- ct5760/c3850 Creating interface group and mapping of interfaces to it - ct5760/c3850 To verify ct5760 configuration through Wireless Wizard To verify c3850 configuration through Wireless Wizard To verify the AP group configurations via GUI is applied successfully To verify the interface group creation is successful via GUI CMX/MSE Presence Analytics WLJ82MR1S_Presence_208 NTP date in Presence analytics page To verify the NTP date in Presence analytics page WLJ82MR1S_Presence_209 AP selection in presence site To verify the AP selection after Adding controllers WLJ82MR1S_Presence_210 Site specific presence details To verify the site specific presence details WLJ82MR1S_Presence_211 Site Specific time update in presence To verify the site specifc time update in presence WLJ82MR1S_Presence_212 Connected clients in CMX To verify the connected clients in CMX presence page WLJ82MR1S_Presence_213 Proper Time Zone -JP To verify the proper timezone WLJ82MR1S_Presence_214 User with admin role To verify the analytics page with admin role 47

Location Analytics Regression Features - Test Summary WLJ82MR1S_Presence_215 Time zone in site groups To verify the time zone in site groups Location Analytics WLJ82MR1S_Loc_Ana_216 Access points in the Floor map client devices are displayed in the floor map or not WLJ82MR1S_Loc_Ana_217 Wireless Laptop Client Location in Floor map laptop client devices are displayed in the floor map or not WLJ82MR1S_Loc_Ana_218 Wireless mobile Client Location in Floor map mobile client devices are displayed in the floor map or not WLJ82MR1S_Loc_Ana_219 Interferers in Floor map interferers are displayed in the floor map or not WLJ82MR1S_Loc_Ana_220 Rogue Devices in Floor map rogues are displayed in the floor map or not WLJ82MR1S_Loc_Ana_221 Client movement history playback client's movement history is shown or not Visitor Management WLJ82MR1S_CMX_VISITOR_222 NMSP Message for De-auth the MSE issues NMSP Message for De-auth Packet or not WLJ82MR1S_CMX_VISITOR_223 User Bandwidth To verify that the Bandwidth is tracked or not when the Limit is set to Zero WLJ82MR1S_CMX_VISITOR_224 New Visitors To verify Whether New Visitors are Displayed in the CMX Dashboard or not 48

Regression Features - Test Summary Facebook WiFi WLJ82MR1S_CMX_VISITOR_225 WLJ82MR1S_CMX_VISITOR_226 Repeated Visitors Active Visitors To verify Whether Repeated Visitors are Displayed in the CMX Dashboard or not To verify Whether Active Visitors are Displayed in the CMX Dashboard or not Facebook WiFi WLJ82MR1S_Facebook_227 Restricting free internet access for unauthenticated clients To verify denial of internet access for unauthenticated Android users is successful or not WLJ82MR1S_Facebook_228 Http Redirection for Continuing Browsing in end clients To Verify Redirection to the Http page initially requested by the users is successful or not WLJ82MR1S_Facebook_229 KNOWN Users authenticated users are listed in the user data tab or not PI NCS Maps WLJ82MR1S_MAP_230 Copy & Replace AP-Map To verify the successful copy & replace Autonomous to LWAPP Migration 49

HA Monitoring Regression Features - Test Summary WLJ82MR1S_Migration_231 Autonomous to LWAPP Migration To migrate the autonomous AP to LWAPP using archive command in AAP CLI. HA Monitoring WLJ82MR1S_HA_WLC_232 Verification of trap when WLC turns Standby-Hot during HA pair-up trap has been generated when WLC becomes Standby-Hot WLJ82MR1S_HA_WLC_233 Verification of trap when WLC turns Standby-Hot when Standby is booting up trap has been generated when WLC becomes Standby-Hot when the standby WLC is booting up WLJ82MR1S_HA_WLC_234 Verification of trap when Standby WLC goes down in case of Manual Reset To verify the trap generation in Active WLC once standby goes down due to manual reset WLJ82MR1S_HA_WLC_235 Verification of trap when Standby WLC goes down with Standby entering into maintenance mode To verify the trap generation in Active WLC once standby goes to maintenance mode WLJ82MR1S_HA_WLC_236 Verification of peer statistics on Active WLC CLI after multiple switchover To verify the thread stats of Standby WLC in new Active CLI after multiple switchover Backup and restore WLJ82MR1S_BnR_237 Performing Backup and restore in NCS To verify the NCS successfully done a backup and restore 50

Regression Features - Test Summary CME - Inputs CME - Inputs CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME WLJ82MR1S_APJoin_CME_01 AP700I joining with CME 1852 To verify the AP joining process of subordinate AP700I with CME WLJ82MR1S_APJoin_CME_02 AP700W joining with CME 1852 To verify the AP joining process of subordinate AP700W with CME WLJ82MR1S_APJoin_CME_03 AP1600 joining with CME 1852 To verify the AP joining process of subordinate AP1600 with CME WLJ82MR1S_APJoin_CME_04 AP1700 joining with CME 1852 To verify the AP joining process of subordinate AP1700 with CME WLJ82MR1S_APJoin_CME_05 AP2600 joining with CME 1852 To verify the AP joining process of subordinate AP700W with CME WLJ82MR1S_APJoin_CME_06 AP2700 joining with CME 1852 To verify the AP joining process of subordinate AP2700 with CME WLJ82MR1S_APJoin_CME_07 AP3500 joining with CME 1852 To verify the AP joining process of subordinate AP3500 with CME WLJ82MR1S_APJoin_CME_08 AP3600 joining with CME 1852 To verify the AP joining process of subordinate AP3600 with CME WLJ82MR1S_APJoin_CME_09 AP3700 joining with CME 1852 To verify the AP joining process of subordinate AP3700 with CME WLJ82MR1S_APJoin_CME_10 AP700I joining with CME 1832 To verify the AP joining process of subordinate AP700I with CME WLJ82MR1S_APJoin_CME_11 AP700W joining with CME 1832 To verify the AP joining process of subordinate AP700W with CME 51

Regression Features - Test Summary CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME WLJ82MR1S_APJoin_CME_12 WLJ82MR1S_APJoin_CME_13 WLJ82MR1S_APJoin_CME_14 WLJ82MR1S_APJoin_CME_15 WLJ82MR1S_APJoin_CME_16 WLJ82MR1S_APJoin_CME_17 WLJ82MR1S_APJoin_CME_18 WLJ82MR1S_APJoin_CME_19 WLJ82MR1S_APJoin_CME_20 WLJ82MR1S_APJoin_CME_21 WLJ82MR1S_APJoin_CME_22 AP1600 joining with CME 1832 AP1700 joining with CME 1832 AP2600 joining with CME 1832 AP2700 joining with CME 1832 AP3500 joining with CME 1832 AP3600 joining with CME 1832 AP3700 joining with CME 1832 Android client connectivity to the CME with Security type " None" ios client connectivity to the CME with Security type "None" Client connectivity associated as "Guest" Android and ios client connectivity to the CME with Security type as " WPA2 Personal" To verify the AP joining process of subordinate AP1600 with CME To verify the AP joining process of subordinate AP1700 with CME To verify the AP joining process of subordinate AP700W with CME To verify the AP joining process of subordinate AP2700 with CME To verify the AP joining process of subordinate AP3500 with CME To verify the AP joining process of subordinate AP3600 with CME To verify the AP joining process of subordinate AP3700 with CME To verify the client connectivity of Android client to CME with security type configured as "None" To verify the client connectivity of ios client to CME with security type configured as "None" To verify the Client connectivity with Guest access To veriify the Android and ios clients connected to the CME with security type as WPA2- Personal 52

Regression Features - Test Summary CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME WLJ82MR1S_APJoin_CME_23 WLJ82MR1S_APJoin_CME_24 WLJ82MR1S_APJoin_CME_25 WLJ82MR1S_APJoin_CME_26 WLJ82MR1S_APJoin_CME_27 WLJ82MR1S_APJoin_CME_28 WLJ82MR1S_ME_VRRP_01 WLJ82MR1S_ME_VRRP_02 Android and ios client connectivity to the CME with Security type as " WPA2 Enterprise" and Authentication as "AP" Android and ios client connectivity to the CME with Security type as " WPA2 Enterprise" and Authentication as "External Radius" Checking Apple MacBook Pro client connectivity to the ME with Security type as " WPA2 Enterprise" Checking Apple MacBook Air client connectivity to the ME with Security type as " WPA2 Enterprise" Checking the client traffic between two wireless clients connected to the ME. Checking the device classification of Android and ios devices connected to the ME Day 0 config when there is no Master AP Day 0 config when Master AP is already present To verify the Android and ios clients connected to the CME with security type as "WPA2- Enterprise" and local authentication To verify the Android and ios clients connected to the CME with security type as "WPA2- Enterprise" and External Radius auth To verify the Apple MacBook Pro clients connected to the CME with security type as "WPA2- Enterprise" To verify the Apple MacBook Air client connected to the CME with security type as "WPA2- Enterprise" with local EAP auth To verify the client traffic between two wireless clients connected to the ME To verify the classification of clients connected to the CME To verify the config of Day 0 AP when there is no Master AP present already To verify the Day 0 AP behavior when Master AP is already present 53

Regression Features - Test Summary CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME WLJ82MR1S_ME_VRRP_03 WLJ82MR1S_ME_VRRP_04 WLJ82MR1S_ME_VRRP_05 WLJ82MR1S_ME_VRRP_06 WLJ82MR1S_ME_VRRP_07 WLJ82MR1S_ME_VRRP_08 WLJ82MR1S_ME_VRRP_09 WLJ82MR1S_ME_VRRP_10 WLJ82MR1S_ME_VRRP_11 WLJ82MR1S_ME_VRRP_12 WLJ82MR1S_ME_VRRP_13 Master AP election when rebooting after controller config User Configured Master AP New AP added to the topology Booting all Aps when no Master AP is configured by user Election process when Master AP goes down Previous Master AP becomes UP Configuring Primary and secondary AP Primary goes down either by HW failure/network failure Checking client connectivity to the Master AP Checking client connectivity when Master failover happens Checking Master failover with more than 2 ME capable Aps To check whether day 0 AP behavior configured for VRRP ip and on reboot To check whethet AP configured by user will become Master AP To check when new AP is added to the existing topology To check the Master selection while booting all the Aps To check the behavior of AP when Master goes down the previous Master AP remains in backup state once it is UP To verify the user configured primary/secondary AP To check whether secondary becomes Master when primary goes down by HW failure/nw failure To check whether the client is connected to Master CME in all supported security types To check the client connectivity to the Master AP with all supported security types To check the Master failover when there is more than 2 CME capable Aps 54

Regression Features - Test Summary CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME WLJ82MR1S_ME_VRRP_14 WLJ82MR1S_ME_VRRP_15 WLJ82MR1S_ME_01 WLJ82MR1S_ME_02 WLJ82MR1S_ME_03 WLJ82MR1S_ME_04 WLJ82MR1S_ME_05 WLJ82MR1S_ME_06 WLJ82MR1S_ME_07 WLJ82MR1S_ME_08 WLJ82MR1S_ME_09 Client connectivity to the Master AP- Android Clients Client connectivity and traffic flow when Master failover occursios clients Day 0 SSID Broadcasting ME AP Joining the master ME controller Client connectivity to Day 0 Mobility Express AP Initial Setup configuration Logging into Mobility Express Monitoring the WLANs Monitoring the active clients Viewing Details of Interferers Viewing Details of access points To check the connection of Android Clients to the Master AP and check the client traffic when failover occurs To check the client connectivity and traffic flow when master AP failover occurs Day 0 SSID is Broadcasted or not ME AP joins the master ME controller or not Client could be connected to Day 0 Mobility Express AP Initial Setup configuration is successful or not on Mobility express admin user can log into the Mobility express UI or not WLANs can be monitored or not from network summary page active clients can be monitored or not from network summary page Interferers can be monitored or not from network summary page the access points are displayed according to their radio frequency or not 55

Regression Features - Test Summary CME Redundancy and EAP Scenarios, Mobility Express Basic Testing, iphone and Android Client testing for CME WLJ82MR1S_ME_10 WLJ82MR1S_ME_11 WLJ82MR1S_ME_12 WLJ82MR1S_ME_13 WLJ82MR1S_ME_14 WLJ82MR1S_ME_15 WLJ82MR1S_ME_16 WLJ82MR1S_ME_17 WLJ82MR1S_ME_18 WLJ82MR1S_ME_19 WLJ82MR1S_ME_20 WLJ82MR1S_ME_21 Customizing the AP Performance View - Adding Widgets Customizing the AP Performance View - Removing Widgets Customizing the Client Performance View - Adding Widgets Customizing the Client Performance View - Removing Widgets Setting Up WLANs Enabling WLANs Disabling WLANs Deleting WLANs Viewing WLAN Users Adding a WLAN User Administering Access Points Saving Configuration widgets could be added to AP Performance View or not widgets could be removed from AP Performance View or not widgets could be added to client Performance View or not widgets could be removed from client Performance View or not WLAN could be created successfully or not the WLAN can be enabled or not the WLAN can be disabled or not the WLAN can be deleted or not all WLAN users are displayed or not a new WLAN user could be added or not the Access Point config can be changed or not in ME the configuration changes are retained after reboot or not 56

Regression Features - Test Summary Updates to the ClientViewPage in Monitoring Dashboard Updates to the ClientViewPage in Monitoring Dashboard WLJ82MR1S_MD_01 Viewing Connectivity status graph for Active details To verify the Connectivity status graph for Active clients WLJ82MR1S_MD_02 Top applications on the clients To verify the top applications used by the active clients WLJ82MR1S_MD_03 Viewing Mobility State graphic To verify the mobility state graphics WLJ82MR1S_MD_04 Viewing Network, QoS, Security and Policy details to verify the network, qos, security and policy details Client ping test and packet capture WLJ82MR1_Ping_Pack_01 Ping Test - Android Client the ping graph is generated or not as expected if reachable WLJ82MR1_Ping_Pack_02 Packet Capture - Android Client the packets are captured and reported as expected or not WLJ82MR1_Ping_Pack_03 Ping Test - Windows Client the ping graph is generated or not as expected if reachable WLJ82MR1_Ping_Pack_04 Packet Capture - Windows Client the packets are captured and reported as expected or not WLJ82MR1_Ping_Pack_05 Ping Test - IOS Client the ping graph is generated or not as expected if reachable 57

Country code Regression Features - Test Summary WLJ82MR1_Ping_Pack_06 Packet Capture - IOS Client the packets are captured and reported as expected or not Country code WLJ82MR1S_NTP_CountryCode_01 Setting the JP country in ME WLC CLI Japan country code is able to set/not WLJ82MR1S_NTP_CountryCode_02 Setting the India or US country code in ME WLC other country code is able to set WLJ82MR1S_NTP_CountryCode_03 Country code information in ME WLC GUI configured country code is displayed in ME WLC GUI or not Failed CSCuy62177 WLJ82MR1S_NTP_CountryCode_04 Show country channels To verify the country channels in ME WLC WLJ82MR1S_NTP_CountryCode_05 Setting the country in ME WLC GUI country code is able to set not in ME WLC GUI Failed CSCuy62177 WLJ82MR1S_NTP_CountryCode_06 Country code configuration after reboot To verify the country code after reboot NTP Servers WLJ82MRS_NTP_CME _01 Adding NTP server NTP server configuration is added or not in Mobility express WLC WLJ82MRS_NTP_CME _02 Edit NTP server To verify the whether we can be able to edit the NTP server in mobility express WLC 58

Regression Features - Test Summary Software update using HTTP WLJ82MRS_NTP_CME _03 Delete NTP server To verify the deletion of NTP server in Mobility express wlc WLJ82MRS_NTP_CME _04 Sync between NTP server and ME WLC To verify Sync between NTP server and ME WLC WLJ82MRS_NTP_CME _06 NTP Configuration after reboot To verify the NTP configuration Software update using HTTP WLJ82MR1S_SW_HTTP_01 Update Now Update Now works as expected or not via HTTP Connection WLJ82MR1S_SW_HTTP_02 Scheduled Image Upgrade Scheduled upgrade works as expected or not via HTTP Connection 59

Software update using HTTP Regression Features - Test Summary 60

CHAPTER 5 Adhoc Test cases Adhoc Test Cases, page 61 Adhoc Test Cases WLJ82MR1S_Failed_01 Telnet/SSH config for AP after upload/download config To verify Failed Telnet/SSH config for AP after uploading and downloading config CSCuy51343 61

Adhoc Test Cases Adhoc Test cases 62

CHAPTER 6 Related Documentation Related Documentation, page 63 Related Documentation WLC 8.2 release notes http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82.html CMX configuration guide http://www.cisco.com/c/en/us/td/docs/wireless/mse/10-2/cmx_config/b_cg_cmx102.html PI 3.1 release notes http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/release/notes/cpi_rn.html MSE configuration guide http://www.cisco.com/c/en/us/td/docs/wireless/mse/8-0/mse_cmx/8_0_mse_cas.html ACS 5.8 User Guide http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-8/release/notes/acs_ 58_rn.html ISE 2.1 release notes http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/release_notes/ise21_rn.html 63