STEVAL-CCM002V1. TFT-LCD panel demonstration board based on the STM32 as LCD controller. Features. Description

Similar documents
STEVAL-SPBT4ATV3. USB dongle for the Bluetooth class 1 SPBT2632C1A.AT2 module. Features. Description

STEVAL-PCC010V1. ST802RT1A Ethernet PHY demonstration board with STM32F107 controller add-on board. Features. Description

AN2667 Application note

AN2676 Application note

STM32-SK/KEIL STR91X-SK/KEI, STR7-SK/KEIL

AN4113 Application note

AN2672 Application note

STM3210B-SK/KEIL STR91X-SK/KEI, STR7-SK/KEIL

AN626 Application note

AN2470 Application note TS4871 low voltage audio power amplifier Evaluation board user guidelines Features Description

STM32-MP3NL/DEC. STM32 audio engine MP3 decoder library. Description. Features

STM3220G-SK/KEI. Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Features. Description

UM1572 User manual. STEVAL-IPE020V1: ST energy meter application based on the Android platform. Introduction

AN3996 Application Note

AN2143 Application note

UM0792 User manual. Demonstration firmware for the DMX-512 communication protocol transmitter based on the STM32F103Zx.

EV-VNQ5E050AK VNQ5E050AK evaluation board

AN3354 Application note

AN3279 Application Note

STM32-SK/RAIS,STR91X-SK/RAI,STR7-SK/RAIS STM32-D/RAIS,STR9-D/RAIS,STR7-D/RAIS

EVAL6235PD. L6235 three-phase brushless DC motor driver demonstration board. Features. Description

STEVAL-IHM028V1. 2 kw 3-phase motor control demonstration board featuring the IGBT intelligent power module STGIPS20K60. Features.

UM0693 User manual. 1 Introduction. STM8L101-EVAL demonstration firmware

AN3980 Application note

OSPlus USB Extension. OSPlus USB 2.0 extension. Description. Features. Application. TCP/IP stack NexGenOS NexGenIP VFS. FAT Ext2 LVM Device layer

UM0401 User manual. User manual for eight bit port expander STMPE801 demonstration board. Introduction

AN2855 Application note

AN2240 Application note

AN3965 Application note

AN2474 Application note

STTS V memory module temperature sensor. Features

STICE CF/Stice_Connect AD/Stice_Connect AS/Stice_Connect

AN3154 Application note

UM1488 User manual. STPMC1 evaluation software. Introduction

SOT23-6L ESDALCL6-2SC6

AN2673 Application note

AN2557 Application note

STM8 I 2 C optimized examples

AN2261 APPLICATION NOTE

AN2825 Application Note

AN2734 Application note S-Touch design procedure Introduction

STA bit single chip baseband controller for GPS and telematic applications. Features

STM8L-PRIMER STM32-PRIMER STMPRIMER

AN3250 Application note

ST19WR08 Dual Contactless Smartcard MCU With RF UART, IART & 8 Kbytes EEPROM Features Contactless specific features

AN3001 Application note

STLC2500D. Bluetooth V2.1 "Lisbon" + EDR. Features. Description

UM1084 User manual. CR95HF development software user guide. Introduction. Reference documents

AN2737 Application note Basic in-application programming example using the STM8 I 2 C and SPI peripherals Introduction

ST19NP18-TPM-I2C Trusted Platform Module (TPM) with I²C Interface Features

TN0132 Technical note

STM8L-PRIMER STM32-PRIMER STMPRIMER

AN2361 Application note

STM32 embedded target for MATLAB and Simulink release 3.1. Summary for STM32 embedded target for MATLAB and Simulink release 3.1:

ST33F1M. Smartcard MCU with 32-bit ARM SecurCore SC300 CPU and 1.25 Mbytes high-density Flash memory. Features. Hardware features.

EMIF01-SMIC01F2 IPAD. Single line EMI filter including ESD protection. Main application. Description. Benefits. Pin configuration (Bump side view)

Main components 1 A, high efficiency adjustable single inductor dual mode buckboost DC-DC converter

EMIF02-SPK02F2. 2-line IPAD, EMI filter and ESD protection. Features. Application. Description. Complies with the following standards

Main components USB charging controller with integrated power switch

Obsolete Product(s) - Obsolete Product(s)

STMicroelectronics. STxP70-4 assembler. User manual Rev A. October

RN0046 Release note. 1 Introduction. SimpleMAC library for STM32W108xx kits. About this release note

Description SPC564A-DISP. March 2014 DocID Rev 3 1/5

SMP75. Trisil for telecom equipment protection. Features. Description. Applications. Benefits

LD A very low drop adjustable positive voltage regulator. Description. Features


STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS

ST21NFCB. Near field communication controller. Features. RF communications. Hardware features. Communication interfaces. Electrical characteristics

EMIF02-MIC01F2 2-line IPAD, EMI filter including ESD protection Features Application Description Complies with the standards:

AN4321 Application note

Getting started with DfuSe USB device firmware upgrade STMicroelectronics extension

AN2430 Application note

AN2408 Application note

AN2594 Application note

AN2202 Application note

AN2592 Application note

AN3099 Application note

How to interpret the LPS331AP pressure and temperature readings. Main components mbar absolute barometer with digital output

AN2781 Application note

AN3362 Application note

AN3975 Application note

AN4274 Application note

AN3991 Application note

AN3265 Application note

TN0189 Technical note

AN2768 Application note LIS331DL 3-axis digital MEMS accelerometer: translates finger taps into actions Introduction

AN3988 Application note

UM0592 User manual. STEVAL-PCC006V1, HDD bridge extension board. board for mass storage applications. Introduction

L6460. SPI configurable stepper and DC multi motor driver. Features. Description

ST10F271B/E, ST10F272B/E Errata sheet

AN4440 Application note

AN3174 Application note

SMP30. Trisil for telecom equipment protection. Features. Applications. Description. Benefits

STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS

AN3155 Application note

AN4464 Application note

AN3140 Application note

ST33F1M, ST33F1M0, ST33F896, ST33F768, ST33F640, ST33F512

Description of STM8 LIN software package (STSW-STM8A-LIN) release 4.1. Table 1. Release information. STM8 LIN package

EMIF03-SIM06F3. 3-line IPAD, EMI filter including ESD protection. Description. Features. Application. Complies with the following standards:

Transcription:

TFT-LCD panel demonstration board based on the STM32 as LCD controller Data brief Features Displays images on a TFT-LCD using the STM32 as LCD controller Includes a slideshow of images to demonstrate static display model STM32 FSMC (flexible static memory interface) drives TFT using external SRAM as refresh RAM On-board constant current drive circuit for LED-based TFT-LCD backlighting Dimming control for the TFT-LCD backlighting Jumper headers offer easy analysis of TFT- LCD interface to the microcontroller RoHS compliant Description The STEVAL-CCM002V1 demonstration board is an STM32-based LCD controller for TFT-LCD displays. The board provides a platform for testing the capabilities of the STM32F103VET6 FSMC peripheral to drive a TFT-LCD panel without an LCD controller. A 3.5 QVGA resolution TFT-LCD panel is interfaced with the STM32 FSMC peripheral. The board is designed to be connected as a daughterboard to the STM3210E-EVAL demonstration kit.. STEVAL-CCM002V1 June 2010 Doc ID 17541 Rev 1 1/6 For further information contact your local STMicroelectronics sales office. www.st.com 6

Schematic diagrams STEVAL-CCM002V1 2/6 Doc ID 17541 Rev 1 1 Schematic diagrams Figure 1. LED section

Schematic diagrams Doc ID 17541 Rev 1 3/6 Figure 2. Demonstration board connectors

Schematic diagrams STEVAL-CCM002V1 Figure 3. Single channel inverter, LCD backlight driver and touchscreen controller 4/6 Doc ID 17541 Rev 1

Revision history 2 Revision history Table 1. Document revision history Date Revision Changes 16-Jun-2010 1 Initial release. Doc ID 17541 Rev 1 5/6

Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 6/6 Doc ID 17541 Rev 1