Overview HPE 527 802.11ac Dual Radio Unified Walljack Access Device Series Models HP 527 Dual Radio 802.11ac (AM) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (JP) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (IL) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (AM) 20-unit Eco-pack Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) 20-unit Eco-pack Unified Wired-WLAN Walljack JH048A JH049A JH050A JH051A JH052A JH053A Key features 802.11ac Dual Radio Walljack with one Gigabit Ethernet (GbE) uplink and three GbE access ports Four high-gain embedded antennas providing extended coverage and high-speed connectivity A single GbE Power over Ethernet (PoE) cable drop, reducing cabling, switch ports and local power Passthrough port as well as PoE out, reducing additional power needs to IP-based VoIP phone Limited Lifetime Warranty Product overview The HPE 527 802.11ac Unified Walljack is a dual radio 2.4GHz and 5GHz unified wired-wireless access point and GbE switch that works in sync with HPE Unified controllers, delivers high-performance networking solutions. The controllers provide advanced radio resource management (RRM). This 527 802.11ac Unified Walljack provides one GbE uplink port, three GbE ports, one 802.11b/g/n radio, one 802.11ac radio, and a pass-through RJ-45 connection to support a range of service and user connectivity options. One of the front panel GbE ports can be configured as an IEEE 802.3af-compliant PoE forwarding port to enable devices such as IP telephones to be powered directly from the Walljack. The HPE 527 802.11ac Dual Radio Unified Walljack uses a single PoE cable drop, reducing cabling, switch ports, and power sourcing equipment. The HPE 527 provides unified wired-wireless connectivity into a low-profile design that can be quickly, easily and discretely installed in a standard wall outlet box. The HPE 527 is designed to provide wireless coverage for one or more rooms. Features and benefits Management Hewlett Packard Enterprise Wi-Fi Clear Connect o provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-wi-fi sources using spectrum analysis capabilities built into the Walljack, identifying rogue activity, and making decisions at a system-wide level Advanced radio resource management o Automatic radio power adjustments include real-time power adjustments based on changing environmental conditions and signal coverage adjustment Page 1
Overview o Automatic radio channel provides intelligent channel switching and real-time Interference detection o Intelligent client load balancing determines number of clients across neighboring APs and adjusts client allocation to balance the load o Airtime fairness provides equal RF transmission time for wireless clients Spectrum Analysis o Power/frequency spectrum analysis measures noise from IEEE 802.11 remote sources o Signal detection/classification o identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens Evaluation of channel quality helps detect severe channel degradation and improve the reporting of poor RF performance Integrated wireless IDS/IPS detects and locates and mitigates unknown and rogue devices (see controller datasheet for details) HPE Intelligent Management Center and Wireless Services Manager provides central management for discovery, logging, status, and configuration management Enhanced AP survivability continues to operate using the existing configuration while the AP searches for a new controller Compatible with HPE Unified Controllers Refer to the HPE Access Point Controller Compatibility Matrix at http://h20195.www2.hp.com/v2/getdocument.aspx?docname=4aa5-0345enw&cc=us&lc=en Quality of Service (QoS) Rate limiting o supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums Centralized traffic o maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access IEEE 802.1p prioritization delivers data to devices based on the priority and type of traffic Wireless o L2/L3/L4 classification IEEE 802.1p VLAN priority and DiffServ o Multiple SSIDs per radio Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority Connectivity IEEE 802.3af Power over Ethernet support simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location. Unit can be powered by IEEE 802.3af or IEEE 802.3at (PoE+) source Power Forwarding PoE Class 1/2/3 when powered via IEEE 802.3at (PoE+) Auto-MDIX automatically adjusts for straight-through or crossover cables on all Ethernet interfaces Mobility Page 2
Overview Two spatial stream MIMO technology o 2x2:2 MIMO provides 802.11b/g/n and 802.11ac Wi-Fi technology, which allows for 866 of signaling @ 5GHz and 300 for 802.11n o Embedded antenna provides excellent coverage through use of two 2 dbi embedded antennae; no need for the added cost of external antennas Interoperability o meets Wi-Fi Alliance Certifications, including IEEE 802.11b/g/n/ac to help ensure multivendor interoperability Multiple SSIDs o Up to 16 SSIDs per radio, each with unique MAC address, configurable SSID broadcasts o Individual security and QoS profiles o Configurable DTIM and minimum data rate o Each mapped to separate IEEE 802.1Q VLANs o WMM and/or WMM-PS o Security filter o IP filter AP client access control functions o offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP o delivers MAC address authentication using local or RADIUS access lists o provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2 o supports RADIUS Client (RFC 2865 and 2866) with location-aware support o provides Layer 2 wireless client isolation Security Choice of IEEE 802.11i, WPA2, or WPA locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic IEEE 802.1X support provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point Local wireless bridge client traffic filtering prevents communication between wireless devices associated with the same access point Additional information RFC Support refer to the controller datasheet for specific RFCs and other industry standards supported Warranty and support Limited Lifetime Warranty see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase. Software releases to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary Page 3
Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack- Shippable solution. HP 527 802.11ac (AM) Unified Walljack 1 RJ-45 autosensing 10/100/1000 PoE uplink port 2 RJ-45 autosensing 10/100/1000 downward facing ports 1 RJ-45 autosensing 10/100/1000 downward facing PoE port 1 RJ-45 pass through port Wireless - 802.11b/g/n, a/n/ac HP 527 802.11ac (WW) Unified Walljack 1 RJ-45 autosensing 10/100/1000 PoE uplink port 2 RJ-45 autosensing 10/100/1000 downward facing ports 1 RJ-45 autosensing 10/100/1000 downward facing PoE port 1 RJ-45 pass through port Wireless - 802.11b/g/n, a/n/ac HP 527 802.11ac (JP) Unified Walljack 1 RJ-45 autosensing 10/100/1000 PoE uplink port 2 RJ-45 autosensing 10/100/1000 downward facing ports 1 RJ-45 autosensing 10/100/1000 downward facing PoE port 1 RJ-45 pass through port Wireless - 802.11b/g/n, a/n/ac HP 527 802.11ac (IL) Unified Walljack 1 RJ-45 autosensing 10/100/1000 PoE uplink port 2 RJ-45 autosensing 10/100/1000 downward facing ports 1 RJ-45 autosensing 10/100/1000 downward facing PoE port 1 RJ-45 pass through port Wireless - 802.11b/g/n, a/n/ac HP 527 802.11ac (AM) 20Pk Unifd Walljack 1 RJ-45 autosensing 10/100/1000 PoE uplink port 2 RJ-45 autosensing 10/100/1000 downward facing ports 1 RJ-45 autosensing 10/100/1000 downward facing PoE port 1 RJ-45 pass through port Wireless - 802.11b/g/n, a/n/ac HP 527 802.11ac (WW) 20Pk Unifd Walljack 1 RJ-45 autosensing 10/100/1000 PoE uplink port 2 RJ-45 autosensing 10/100/1000 downward facing ports 1 RJ-45 autosensing 10/100/1000 downward facing PoE port 1 RJ-45 pass through port Wireless - 802.11b/g/n, a/n/ac JH048A See Configuration NOTE:1 JH049A See Configuration NOTE:2 JH050A See Configuration NOTE:4 JH051A See Configuration NOTE:3 JH052A See Configuration NOTE:1 JH053A See Configuration NOTE:2 Configuration Rules: Page 4
Configuration Note 1 Note 2 Note 3 Note 4 Only available in AMS. (Warning in Clic only) Not available in AMS, Japan or Israel. (Warning in Clic only) Only available in Israel. (Warning in Clic only) Only available in Japan. (Warning in Clic only) 527 Unified Walljack Options External Power Supplies HP Single-PRT 802.3at Gig PoE PS HP 1-port Power Injector J9867A See Configuration NOTE:1, 5 J9407B See Configuration NOTE:4, 5 Configuration Rules: Note 1 This power supply is supported on the following Walljacks: HP 527 Dual Radio 802.11ac (AM) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (JP) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (IL) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (AM) 20-unit Eco-pack Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) 20-unit Eco-pack Unified Wired-WLAN Walljack JH048A JH049A JH050A JH051A JH052A JH053A Note 4 Using this 1-port Power Injector will disable the PoE Output port on the HPE 527. It is recommended you use the J9867A - HPE Single-PRT 802.3at Gig PoE PS instead: HP 527 Dual Radio 802.11ac (AM) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (JP) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (IL) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (AM) 20-unit Eco-pack Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) 20-unit Eco-pack Unified Wired-WLAN Walljack JH048A JH049A JH050A JH051A JH052A JH053A Note 5 Localization required. (See Localization Menu) Mounting Kit HP Unified Walljack Table Mount Kit JL022A See Configuration NOTE:1 Page 5
Configuration Configuration Rules: Note 1 This Mounting Kit is supported on the following Walljacks: HP 527 Dual Radio 802.11ac (AM) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (JP) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (IL) Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (AM) 20-unit Eco-pack Unified Wired-WLAN Walljack HP 527 Dual Radio 802.11ac (WW) 20-unit Eco-pack Unified Wired-WLAN Walljack JH048A JH049A JH050A JH051A JH052A JH053A Page 6
Technical Specifications HP 527 Dual Radio 802.11ac (AM) Unified Wired-WLAN Walljack (JH048A) HP 527 Dual Radio 802.11ac (WW) Unified Wired-WLAN Walljack (JH049A) HP 527 Dual Radio 802.11ac (JP) Unified Wired-WLAN Walljack (JH050A) HP 527 Dual Radio 802.11ac (IL) Unified Wired-WLAN Walljack (JH051A) HP 527 Dual Radio 802.11ac (AM) 20-unit Eco-pack Unified Wired-WLAN Walljack (JH052A) HP 527 Dual Radio 802.11ac (WW) 20-unit Eco-pack Unified Wired-WLAN Walljack (JH053A) I/O ports and slots Additional ports and slots 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 autosensing 10/100/1000 PoE port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 autosensing 10/100/1000 PoE+ port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 pass through port 1 USB 2.0 AP characteristics Radios (built-in) 802.11a/b/g/n/ac Radio operation modes AP operation modes Wi-Fi Alliance Certification Antenna Number of internal antennas Physical characteristics Dimensions Weight Client access, Packet capture Controlled a/b/g/n/ac Wi-Fi Certified (2) 2 dbi 2.4 GHz and (2) 2 dbi 5 GHz omnidirectional antennas 4 3.4(w) x 5.91(d) x 1.38(h) in (8.6 x 15 x 3.5 cm) 0.77 lb (0.35 kg) mounting bracket Mounting and enclosure Includes mounting bracket and screws for wall installation. Environment Operating temperature 32 F to 113 F (0 C to 45 C) Operating relative 5% to 95%, noncondensing humidity Nonoperating/Storage -40 F to 158 F (-40 C to 70 C) temperature Nonoperating/Storage relative humidity 5% to 95%, noncondensing Electrical characteristics Description The HPE 527 Walljack, when powered through the uplink GbE PoE/PoE+ port, acts as a PoE PD complying with the IEEE 802.3af/at standards. The HPE 527 Walljack can also provide power to its USB 2.0 port (maximum 5V/0.5A output). Maximum power rating 12.9 W without supplying power and 25.5 W supplying 802.3af power out the customer facing port Notes Optional 48 VDC power supply Page 7
Technical Specifications Frequency band and Operating channels Americas European Union Rest of World (Actual channels designated by selecting country in UI) Taiwan Japan Israel 2.412-2.462 GHz (1-11 channels) 5.180-5.320 GHz (36-64 channels) 5.500-5.700 GHz (100-140 (excluding 5600-5670 MHz) channels) 5.745-5.825 GHz (149-165 channels) 2.412-2.472 GHz (1-13 channels) 5.180-5.320 GHz (36-64 channels) 5.500-5.700 GHz (100-140 (excluding 5600-5650 MHz) channels) 2.412-2.472 GHz (1-13 channels) 5.180-5.320 GHz (36-64 channels) 5.500-5.700 GHz (100-140 channels) 5.745-5.825 GHz (149-165 channels) 2.412-2.462 GHz (1-11 channels) 5.280-5.320 GHz (56-64 channels) 5.500-5.700 GHz (100-140 (excluding 5600-5670 MHz) channels) 5.745-5.825 GHz (149-165 channels) 2.412-2.472 GHz (1-13 channels) 5.180-5.320 GHz (36-64 channels) 5.500-5.700 GHz (100-140 channels) 2.412-2.472 GHz (1-13 channels) 5.180-5.320 GHz (36-64 channels) Radio FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea) Safety UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1 Medical EN60601-1-2 RF Exposure FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std. Features Dual radio: IEEE 802.11a/n/ac for very high-throughput applications and IEEE 802.11b/g/n for legacy support applications - Integrated antennas for both IEEE radios, supporting two spatial streams and 2x2 MIMO - Four embedded antennas - Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet Emissions EN 55022 Class B; EN 60601-1-2; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B Notes Supported data rates 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15, 1 and 2 spatial streams) 802.11ac: 6.5 to 866 (MCS0 to MCS9, 1 and 2 spatial streams) 802.11n high-throughput (HT) 20/40 802.11ac very high throughput (VHT) 20/40/80 802.11n/ac packet aggregation A-MPDU and A-MSDU The HPE 527 Walljack power information listed includes the embedded antenna. Review the Hewlett Packard Enterprise documentation for your AP to understand the maximum output setting for your AP based on your country's regulations. Two spatial stream AP Walljack, supporting 866 in the 5GHz band and 300 in the 2.4GHz band. Maximum transmit power varies by country. Regulatory model number: BJNGA-FB0005 Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for Page 8
Technical Specifications details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. Radio characteristics HP 527 Dual Radio 802.11ac (AM) Unified Wired-WLAN Walljack (JH048A) HP 527 Dual Radio 802.11ac (WW) Unified Wired-WLAN Walljack (JH049A) HP 527 Dual Radio 802.11ac (JP) Unified Wired-WLAN Walljack (JH050A) HP 527 Dual Radio 802.11ac (IL) Unified Wired-WLAN Walljack (JH051A) HP 527 Dual Radio 802.11ac (AM) 20-unit Eco-pack Unified Wired-WLAN Walljack (JH052A) HP 527 Dual Radio 802.11ac (WW) 20-unit Eco-pack Unified Wired-WLAN Walljack (JH053A) NOTE: This transmit power data is EIRP and includes the embedded antennas. The receiver sensitivity also includes the antenna gain. IEEE 802.11ac 5GHz @ 80MHz channel Data rate MCS9-866 MCS0-65 Receiver sensitivity -59 dbm -85 dbm Transmit power 18 dbm 22 dbm IEEE 802.11ac 5GHz @ 40MHz channel Data rate MCS9-400 MCS0-30 Receiver sensitivity -62 dbm -88 dbm Transmit power 18 dbm 22 dbm IEEE 802.11n 5GHz @ 40MHz channel Data rate MCS15-300 MCS8-30 Receiver sensitivity -69 dbm -88 dbm Transmit power 19 dbm 22 dbm IEEE 802.11n 5GHz @ 20MHz channel Data rate MCS15-144.4 MCS8-14.4 Receiver sensitivity -72 dbm -92 dbm Transmit power 19 dbm 22 dbm IEEE 802.11n 2.4GHz @ 40MHz channel Data rate MCS15-300 MCS8-30 Mbp Receiver sensitivity -69 dbm -89 dbm Transmit power 20 dbm 22 dbm IEEE 802.11n 2.4GHz @ 20MHz channel Data rate MCS15-144.4 MCS8-14.4 Receiver sensitivity -72 dbm -93 dbm Transmit power 20 dbm 22 dbm IEEE 802.11a 5GHz Data rate 54 6 Page 9
Technical Specifications Receiver sensitivity -75 dbm -92 dbm Transmit power 20 dbm 22 dbm IEEE 802.11b/g 2.4GHz Data rate 54 11 6 1 Standards and Protocols (applies to all products in series) Receiver sensitivity -76 dbm -89 dbm -93 dbm -96 dbm Transmit power 20 dbm 22 dbm 22 dbm 22 dbm Mobility IEEE 802.11a High Speed Physical Layer in the 5 GHz Band IEEE 802.11ac WLAN Enhancements for Very High Throughput IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band IEEE 802.11d Global Harmonization IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band IEEE 802.11h Dynamic Frequency Selection IEEE 802.11i Medium Access Control (MAC) Security Enhancements IEEE 802.11n Dual Band WLAN Enhancements for Higher Throughput NOTE: All of the above standards are now included in IEEE 802.11-2012 Page 10
Accessories accessories Power Supply HP 1-port Power Injector HP Single-Port 802.3at Gigabit PoE In-Line Power Supply HP Gigabit Intellijack 48V Power Supply Mounting Kit HP Unified Wired-WLAN Walljack Table / Flush Wall Mount Kit J9407B J9867A JD055B JL022A Page 11
Summary of Changes Date Version History Action Description of Change 01-Dec-2015 From Version 1 to 2 Changed Overview and Technical Specifications updated Sign up for updates Rate this document Copyright 2015 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. To learn more, visit: http://www.hp.com/networking c04519014-15155 - Worldwide - V2-1-December-2015 Page 12