ZCAM4-AX HAZARDOUS AREA PTZ IP NETWORK CAMERA DS-026 Issue 02 ZIZCAM Ltd are a UK based manufacturer of CCTV Cameras for use in the Hazardous Oil, Gas and Petrochemical industries. Consequently our products are very robust and designed to comply with international standards. Please do not hesitate to contact us for further information on our products we look forward to working with you on a project soon ZIZCAM FOR HAZARDOUS AREAS AXIS High Definition (HD) IP Network camera Option for integral IR illuminator Continuous 360 degree rotation Anti-backlash gearing Brushless motors for longevity AISI 316L Stainless Steel Integral Pelco D or P protocol Telemetry Receiver Optional interface for Ethernet Fibre modem ZIZCAM moves forward the Oil & Gas Petrochemical CCTV market with a new and exciting product. The ZCAM4 range of CCTV pan tilt zoom cameras developed for use in hazardous areas in all offshore, onshore and marine environments. These cameras are constructed entirely from AISI 316L stainless steel for low maintenance and protection from corrosion, small in appearance, lightweight and designed for easy installation and maintenance. Certified for use in ATEX/IECEx hazardous gas and dust environments, the ZCAM4 range provides for all requirements of safety and surveillance monitoring for hazardous areas.
General Technical Specifications General Specifications ATEX Hazardous Area Rating: IECEx Hazardous Area Rating: CE Approval: II 2 G Ex d IIC T4-T6, Tamb -60 C to +60 C Gb, II 2 D Ex tb IIIC T135 C Tamb -60 C to +60 C Db Ex d IIC T4-T6, Tamb -60 C to +60 C Gb, Ex tb IIIC T135 C Tamb -60 C to +60 C Db CE Compliant to ATEX 94/9/EC and EMC 2004/108/EC Directives Construction: Stainless Steel AISI 316L, Supply Voltage: Power Consumption: Cable Entries: Weight: Mounting: Certified Temperature Rating: Operating Temperature: Ingress Protection: 24 Volt AC 50/60Hz, (Optional factory fitted 110/220VAC step down transformer in base) 100 Watts max 2 x M25 or M20 Ex d barrier gland entry at base 24Kg 4 x M10 fixings on 164mm PCD -60 C to +60 C -20 C to +60 C standard (-40 C & -60 C option on request) IP66 & IP68 Pan Tilt Unit Pan Angle: Tilt Angle: Preset positioning: Positioning accuracy: Speed: Limits: 360 continuous rotation +90 /-90 max from horizontal Fitted as standard <0.1, anti backlash gearing Variable 0.1 to 55 /sec Pan and Tilt (nominal) User adjustable software stops, where required Telemetry Control Receiver Driver Pan Tilt Motor Drive: Lens Control: Presets: Communication: Protocols: Auxiliary Relays: 0 to 24VDC variable speed, brushless DC motors Via Camera Module IP Interface 64 preset positions standard RS422/RS485, as standard via Network camera module IP interface Pelco D and P as standard, or to customer specification 2 x 24VAC relays for wash wipe
Network Camera specifications Camera Module : Q1765 18x Zoom Network Camera module Image Sensor: Progressive scan RGB CMOS 1/2.9" Optical Zoom: Digital Zoom: Focal Length: Horizontal angle of view: Aperture: Focus: IR Cut filter Removable: Shutter time: 18x 12x 4.7-84.6 mm 59 (w) - 4 (t) F1.6 (w) - F2.8 (t) Auto focus. Automatically removable infrared-cut filter in day mode and infrared-pass filter 720 nm in night mode 1/28000s to 2s Minimum illumination: Colour: 0.5 lux at 30 IRE F1.6 B/W: 0.04 lux at 30 IRE F1.6 Video compression: Resolutions: Frame Rate: Video streaming: H.264 Mainline and Baseline Profiles (MPEG-4 Part 10/AVC) Motion JPEG 1920x1080 (HDTV 1080p) to 320x180 Up to 25/30 fps (50/60 Hz) in all resolutions Multiple, individually configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth VBR/CBR H.264 Image settings: Auxiliary ports: Manual shutter time, Compression, Colour, Brightness, Sharpness, White balance, Exposure control, Exposure zones, Backlight compensation, WDR-dynamic contrast, Fine tuning of behaviour at low light, Rotation, Text and image overlay, 3D privacy mask, Day/night shift level. Two pin terminal block for the RS485/422serial interface to Telemetry receiver, for Pan Tilt drive.
Dimensions (model shown ZCAM4-3) 365 323 372 2 x CABLE ENTRIES M20/M25 EARTH STUD 184 BASE FIXING HOLES
Basic Models ZCAM4-2 ZCAM4-3 ZCAM4-3L ZCAM4-4L ZCAM4-4W Exd IIC Integrated Pan Tilt 24VDC variable speed 0 to 55 /sec, medium housing length, complete with AXIS Q1765 Network camera module, integral heater demister and sunshield. Exd IIC Integrated Pan Tilt 24VDC variable speed 0 to 55 /sec, medium housing length, complete with AXIS Q1765 Network camera module, integral window wiper, heater demister and sunshield. with AXIS Q1765 Network camera module, integral window wiper, heater demister and sunshield. with AXIS Q1765 Network camera module, IR LED illuminator module, integral heater demister and sunshield. with AXIS Q1765 Network camera module, IR LED illuminator module, integral window wiper, heater demister and sunshield. Part number configuration PTZ Camera models ZCAM4 ** *** *** C* CS = STANDARD 3 METRE COPPER CABLE TAIL C6 = 6 METRE COPPER CABLE TAIL C9 = 9 METRE COPPER CABLE TAIL LV1 = 24-48VDC SUPPLY INPUT ONLY HV1 = 230VAC TRANSFORMER HV2 = 115VAC TRANSFORMER AX1 = AXIS Q1765 HD IP CAMERA 18X ZOOM, f = 4.7mm - 84.6mm AX2 = TBA 2 = MEDIUM HOUSING 3 = MEDIUM HOUSING C/W WIPER 3L = LONG HOUSING C/W WIPER 4L = IR ILLUMINATOR HOUSING 4W = IR ILLUMINATOR HOUSING C/W WIPER Petrochemical industries. Consequently our products are very robust and designed to