Honor Whistle Smart Control Rechargeable Headset User Guide
Box contents 1 x Headset 3 x Ear tips (small, medium and large) 1 x Ear hook Your headset at a glance 1 x USB adapter 1 x User guide 1
Charging your headset Charge your Bluetooth headset when you hear a "Battery low" warning. The headset's battery can be fully charged in just 30 minutes. The indicator will turn orange during charging and blue once charging is complete. Charge your headset using one of the following methods: Connect the headset to your Honor 7 or another phone that supports OTG charging (an OTG-enabled device supplies a current to an external device such as a headset). Use the USB adapter to connect the headset to a USB port with a 5 V output. For details about how to view the headset's battery status, see "Handy app" on page 11. 2
3
Wearing your headset Choose the ear tip size that is most comfortable. Rest the soft U-shaped support in your ear and gently insert the earphone into your ear. The ear tip should fit comfortably and the headset should not feel loose or tight. If the headset is too loose, attach the ear hook to the headset and hook it over your ear. Use a neck strap and avoid placing the headset in your bag or pocket to ensure that the headset button is not pressed accidentally. 4
Turning the headset on or off To turn the headset on: Press and hold the headset button for 5 seconds until you hear the "Power on" prompt. The indicator will slowly turn blue. To turn the headset off: Press and hold the headset button for 5 seconds until you hear the "Power off" prompt. The indicator will turn orange and dim gradually before turning off. Pairing your headset with your phone Keep your Bluetooth headset and phone as close as possible and away from obstructions, otherwise call and music quality may be affected, or the headset may disconnect from your phone. Using for the first time 1. When you turn on your headset for the first time, it will enter pairing mode and the indicator will blink orange and blue. 5
2. Enable Bluetooth on your phone, search for available devices and then select Honor AM07. You will hear a "Your headset is connected" prompt from your headset and the indicator will turn blue for 1 second when the headset has successfully paired with your phone. Connecting to a previously paired phone The headset will automatically connect to a previously paired phone when it turns on. You will hear a "Your headset is connected" prompt when the headset has connected to your phone. If the headset does not connect to your phone, press the headset button and the headset will attempt to connect again. If the headset still doesn't connect to your phone, turn it off. Then press and hold the headset button for 7 seconds until the headset enters pairing mode. Search for the headset on your phone and reconnect. 6
Connecting to a new phone 1. Turn off the headset. Then press and hold the headset button for 7 seconds until the headset enters pairing mode. The indicator will blink orange and blue. 2. Enable Bluetooth on the new phone, search for available devices and select Honor AM07 to connect. Connecting to two phones at the same time 1. Turn off the headset. Then press and hold the headset button for 7 seconds until the headset enters pairing mode. The indicator will blink orange and blue. 2. Enable Bluetooth on both phones and search for available Bluetooth devices. 3. Select Honor AM07 on both devices to connect to the headset. 7
Adjusting the volume When making calls or listening to music, turn the headset button clockwise to increase the volume or anticlockwise to reduce it. When making calls or listening to music, keep the volume as low as possible to avoid hearing damage. You will hear a prompt when the maximum volume is reached. Answering or declining incoming calls Press the headset button to answer an incoming call. Press the headset button twice to decline an incoming call. Press the headset button to end a call. If you receive a second call during an ongoing call, press the headset button to end the current call and answer the incoming call. Alternatively, press the headset button twice to put the current call on hold and answer the incoming call. 8
Listening to music You can use the headset to listen to music on your phone after you have paired your phone with the headset. When listening to music, press the headset button twice to skip to the next song. Using the headset to control your phone camera This feature only applies to Huawei phones running EMUI 3.0 or above. Unlock your phone and launch the camera app. Once you have paired your phone with the headset, press and hold the headset button for 1 second until you hear a prompt. Release to take a photo. 9
Intelligent voice control Voice control features may vary according to your phone model. The following features are an example of those on the Honor 7. Once you have paired your phone with the headset, press and hold the headset button for 1 second until you hear a prompt. Release to activate voice control. Your phone will switch to the voice control screen. After you hear a prompt you can use voice commands such as "Call Joe Smith" to make a call to Joe Smith. On the voice control screen, touch to view examples of voice commands for different apps. If your phone is locked with a password, you can use voice commands to launch system apps, for example, make calls, send messages and set an alarm. If your phone is unlocked or locked without a password, you can use voice commands to launch system apps and other apps such as Google Voice Search. 10
Handy app Search for and download the Whistle app at the Huawei App Center for additional features such as disconnection notifications, power-saving options and battery status. This app is only available for Android devices. 1. On the home screen of your phone, touch to launch the Whistle app. 11
Indicates the approximate remaining call time. The numbers around the edge of the circle indicate the remaining time in minutes. Displays the remaining battery power. 12
Touch to enable smart power-saving mode. The circle in the app will change from orange to white and the indicator on the headset will turn off. Touch to enable the notification tone. When a disconnection notification is displayed, you will hear the system notification tone on your phone. Touch to enable disconnection notifications. When your phone disconnects from the headset, your phone will display a disconnection notification. Indicates the status of the indicator on the headset. When the circle is orange, the headset indicator is on. A white circle indicates it is off. 13
Indicator status Turning on The indicator gradually turns blue. Turning off The orange indicator gradually dims. Standby The indicator blinks blue twice every 3 seconds. Pairing mode The indicator blinks blue and orange. Connection The indicator is a steady blue for 1 second. successful Connected The indicator blinks blue once every 10 seconds. Incoming call The indicator blinks purple once every 0.5 seconds. Ongoing call The blue indicator gradually brightens and dims once every 10 seconds. Listening to music The blue indicator gradually brightens and dims once every 10 seconds. Charging The indicator is a steady orange. Charging complete The indicator is a steady blue. Low battery The indicator turns orange. 14
Important safety information To ensure your safety during your use of the earphones, please read the following safety information: Use and store your earphones and the accessories in a place where the temperature is between 0 and +45. Extreme heat or coldness may damage your earphones. Keep your earphones and the accessories dry and away from water or moisture. Avoid dropping, tossing, or pulling your earphones. Before you clean and perform maintenance on your earphones, stop using them and disconnect them from any power device. Use accessories approved by Huawei. If your earphones or the accessories have any problems, go to an authorized maintenance center for service. Do not disassemble your earphones. Otherwise, the warranty on your earphones and the accessories will be void. 15
Without adult supervision, do not let children use your earphones. The small parts included with your earphones can be a choking hazard for children. Dispose of or reuse your earphones and the accessories according to local laws and regulations. Improper battery use may lead to fire, explosion, or other hazards. To prevent possible hearing damage, do not listen at high volume levels for long periods. For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible. Unplug the charger from electrical outlets and the device when not in use. Ensure that the charger meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards. 16
Keep the device away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated. The device has a built-in, non-removable battery. Do not attempt to remove the battery, otherwise the device may be damaged. To replace the battery, take the device to an authorized service center. Do not put batteries in fire as they may explode. Damaged batteries may also explode. Environmental protection The device and its accessories (if included), such as the power adapter, headset, and battery should not be disposed of with household garbage. Disposal of the device and its accessories is subject to local regulations. Support proper collection and recycling. 17
EU regulatory conformance Statement Huawei Technologies Co., Ltd. hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the website http://consumer.huawei.com/certification. The following marking is included in the product: This device may be operated in all member states of the EU. --Observe national and local regulations where this device is used. --This device may be restricted for use, depending on the local network. FCC Regulatory Compliance FCC RF warning statement: This device has been evaluated to meet general RF exposure requirements. This device can be used in portable exposure condition without restriction. 18
FCC statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the device and receiver. --Connect the device into a socket on a circuit different from that to which the receiver is connected. 19
--Consult the dealer or an experienced radio/tv technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the device. 20
Legal Notice Copyright Huawei Technologies Co., Ltd. 2015. All rights reserved. Trademarks and Permissions HONOR,,, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Other trademarks, product, service and company names mentioned may be the property of their respective owners. DISCLAIMER ALL CONTENTS OF THIS MANUAL ARE PROVIDED AS IS. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR 21
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy. 22
Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region. All pictures and illustrations in this guide, including but not limited to the phone color, size, and display content, are for reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. model:am07