USER MANUAL LED SPOT LIGHT MS-150 Please Read Over This Manual Before Operating The Light Fixture
1 PRODUCT SPECIFICATIONS 1.1 PRODUCT SPECIFICATIONS The MS-150 is a precise, feature-rich moving head spot fixture that produces bright, even beams of light from its advanced led optical system which includes 150W LED. The combination of dual gobo wheels, a richly saturated color wheel, and a threefacet prism enables awesome effects and totally smooth gobo morphing! Voltage:AC90~260V,50/60Hz Light Source:LED 150W Max Power: 350W Compact Intelligent Moving Head Fixture Beam angle:17 13/18/20-Channel Dmx Control Modes Luminous flux:16000lux@3m Pan:540 /Tilt:270 (8-16Bit Resolution) Static Gobos:7 Metal+open Rotating Gobos: 2 Glass,Metal+open Colors:7 Dichroic colors+ Rotating 3 Facet Prism ZOOM Modes:DMX-512,Auto,Sound Active & Master-Slave Dimension:265x341x546mm Weight:18kg 17 12 19 18 13 20 246-255 231-245 221-230 171-220 166-170 116-165 111-115 11-110 0-10 161-255 91-160 21-90 0-20 Strobe open Random strobe open Close pulse strobe: Slow to Fast open Close pulse strobe: Fast to Slow open Strobe: Fast to Slow close Whole light reset Lamp reset Pan/tilt NC.1..14.
540 CHANNEL VALUE FUNCTION Carton box dimension:410x420x540mm Standard Reduced Extend 8 5 9 200-255 144-199 134-143 124-133 114-123 104-113 84-103 74-83 64-73 56-63 48-55 40-47 32-39 24-31 16-23 8-15 0-7 Gobo Wheel 2 Gobo Wheel Anti-clockwise rotate: Slow to Fast Gobo Wheel clockwise rotate: Fast to Slow Shaking gobo 7: Slow to Fast Shaking gobo 6: Slow to Fast Shaking gobo 5: Slow to Fast Shaking gobo 4: Slow to Fast Shaking gobo 3: Slow to Fast Shaking gobo 2: Slow to Fast Shaking gobo 1: Slow to Fast gobo 7 gobo 6 gobo 5 gobo 4 gobo 3 gobo 2 gobo 1 1.2 PRODUCT FEATURES 410 MS-150 MS-150 420 9 6 10 11 193-255 128-192 0-127 0-255 Gobo 2 Rotation Gobo Wheel Anti-clockwise rotate: Slow to Fast Gobo Wheel clockwise rotate: Fast to Slow Gobo position Gobo 2 Rotation fine 1 10 7 12 128-255 11-127 0-10 Prism Prism2 In Prism1 In 2 3 4 5 6 11 8 13 194-255 190-193 128-189 0-127 Prism Rotation Anti-clockwise rotate from slow to fast Prism but not turn Clockwise rotate from fast to slow Prism position 7 8 9 10 11 12 12 9 14 0-255 Zoom 13 15 0-255 Fine zoom 14 10 16 0-255 Zoom No 1 ITEM Head No ITEM No 4 Enter 7 ITEM Powercon input No 10 ITEM Fuse holder 15 17 0-255 16 11 18 0-255 Fine zooming Dimmer 2 3 Side arm Menu 5 6 Down Up 8 9 Powercon output Switch 11 12 DMX 3-PIN signal input DMX 3-PIN signal output.13..2.
2 INSTALLATION 2.1 MOUNTING: The fixture can be mounted in any position. Always ensure that mounting surface can withstand 10 times the weight of the fixture. Always use a safety cable when mounting the fixture in any elevated position. CHANNEL VALUE FUNCTION Standard Reduced Extend UPRIGHT BRACKET HANGING SAFTY CABLE CLAMP 7 4 8 250-255 245-249 240-244 235-239 230-234 225-229 220-224 215-219 210-214 136-209 125-135 50-124 45-49 40-44 35-39 30-34 25-29 20-24 15-19 10-14 5-9 0-4 Gobo Wheel 1 Shaking gobo 9: Slow to Fast Shaking gobo 8: Slow to Fast Shaking gobo 7: Slow to Fast Shaking gobo 6: Slow to Fast Shaking gobo 5: Slow to Fast Shaking gobo 4: Slow to Fast Shaking gobo 3: Slow to Fast Shaking gobo 2: Slow to Fast Shaking gobo 1: Slow to Fast Anti-clockwise rotate: Slow to Fast Gobo Wheel clockwise rotate: Fast to Slow Gobo 9 Gobo 8 Gobo 7 Gobo 6 Gobo 5 Gobo 4 Gobo 3 Gobo 2 Gobo 1 IMPORTANT SAFETY NOTE!! Always use a safety cable when installing this unit!! Be sure that the safety cable is connected to a solid load-bearing structure..3..12.
4 USING A DMX512 CONTROLLER 4.1 Channel Mode Note: This product have two DMX512 channel configuration: Standard, Reduced and Extend. CHANNEL Standard Reduced Extend VALUE FUNCTION 2.2 FUSE REPLACEMENT Remove the safety cap by a screwdriver. Fetch the old fuse from safety cap. nstall I a new fuse. FUSE nstall I the safety cap. Fuse:3A,250V. SAFTY CAP 1 1 1 0-255 2 2 0-255 3 2 3 0-255 4 4 0-255 5 5 0-255 6 3 6 216-255 213-215 173-212 168-172 163-167 158-162 153-157 148-152 143-147 138-142 133-137 128-132 0-127 7 0-255 Pan 0-100% Pan Fine 0-100% Tilt 0-100% Tilt Fine 0-100% Pan/Tilt Speed Color Wheel Anti-clockwise rotate from slow to fast Clockwise rotate from fast to slow Color8 Color7 Color6 Color5 Color4 Color3 Color2 Color8 Color position Color fine 2.3 SAFETY WARNING IMPORTANT ALWAYS READ THE USER MANUAL BEFORE OPERATION. PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA. This product must be installed by a qualified professional. Always operate the equipment as described in the user manual. A minimum distance of 0.5m must be maintained between the equipment and combustible surface. The product must always be placed in a well ventilated area. Always make sure that the equipment is installed securely. DO NOT stand close to the equipment and stare directly into the LED light source. Always disconnect the power supply before attempting and maintenance. Always make sure that the supporting structure is solid and can support the combined weight of the products. ATTENTION This product left the place of manufacture in perfect condition. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual. Avoid shaking or strong impacts to any part of the equipment. Make sure that all parts of the equipment are kept clean and free of dust. Always make sure that the power connections are connected correct and secure. If there is any malfunction of the equipment, contact your us immediately. When transferring the product, it is advisable to use the original packaging in which the product left the factory. Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is.11..4.
3 DISPLAY PANEL OPERATION 3.1 BASIC MENU Scroll through the main menu or exit from the current sub-menu ENTER Enter the currently selected menu or confirm the current function value DOWN Scroll 'DOWN' through the menu list or decrease the value of the current function UP Scroll 'UP' through the menu list or increase the value of the Current function Curve Curve 1 Curve Curve 2 Curve 3 Allows you to select the Curve. 1) Press Ok - the current settings appear on the display (,or ). - Curve 1 - Curve 2 - Curve 3 3.2 MENU MENU MENU DOWN ADDRESS SYSTEM Manual Run Mode UP ENTER (001~512) CHANNEL MODE Language Channel Option Pan/Tilt Invert Pan Invert Tilt Information Auto Program 1 Auto Program 2 Auto Program 3 Sound Mode DMX512 Mode Display Standard Reduuced 中文 English Head P-T Swap Pan-Tilt Normal System Turn over Display DISPLAY Normal Turn over Allows you to select the DISPLAY. 1) Press Ok - the current settings appear on the display (Normal, or Turnover). - Normal - Turnover 3) Press Ok to confirm the selection or MENUM to keep current Language LANGUAGE 中文 English Allows you to select the LANGUAGE. 1) Press Ok - the current settings appear on the display ( 中文, or English). - 中文 - English.5..10.
Sonud Mode Sonud Mode Allows you to select the Sonud Mode. 1) Press Ok - the current settings appear on the display (, or ). - - DMX512 Mode DMX512 Mode Allows you to select the DMX512 Mode. 1) Press Ok - the current settings appear on the display (, or ). - - 3.7 Option Pan/Tilt Pan/Tilt Invert Pan Invert Tilt Swap Pan-Tilt Allows you to select the Pan/Tilt. 1) Press Ok - the current settings appear on the display (Invert Pan, - Invert Pan - Invert Tilt - Swap Pan-Tilt.9. 3.3 DMX ADDRESS (ADDRESS) ADDRESS (001~512) Allows you to select the DMX ADDRESS. 1) Press Ok - the current DMX Adress appear on the display. keys to plan the DMX Address. 3.4 SyStem... BACK SYSTEM CHANNEL MODE.6. Standard Reduuced Allows you to select the... 1) Press Ok - the current main form appear on the display. CHANNEL MODE Allows you to select the Channel Mode. 1) Press Ok - the current settings appear on the display (Standard, Reduced,Extend ). - Standard - Reduced - Exend Extend 3.5 Manual Lamp control LAMP CONTROL Turn on Allows you to select the LAMP CONTROL. 1) Press Ok - the current settings appear on the display (Turn on, Turn off ). - Turn on - Turn off Turn off
Lamp power LAMP POWER RESET Head P-T System Allows you to select the RESET. 1) Press Ok - the current settings appear on the display (Head, Pan-Tilt Rest or System ). - Head - Pan-Tilt - System Full power Half power Allows you to select the LAMP POWER. 1) Press Ok - the current settings appear on the display (Full power, Half power ). - Full power - Half power Channel CHANNEL Allows you to select the CHANNEL. 1) Press Ok - the current settings appear on the display (Channel1, Channel2,Channel3...Channeln). tokeys select one of the following - Channel1 - Channel2 - Channel3 -... - Channeln.7. 3.6 Run Mode Auto Program 1 Auto Program 1 Allows you to select the Auto Program1. 1) Press Ok - the current settings appear on the display (, or ). - - Auto Program 2 Auto Program 2 Allows you to select the Auto Program2. 1) Press Ok - the current settings appear on the display (, or ). - - Auto Program 3 Auto Program 3 Allows you to select the Auto Program3. 1) Press Ok - the current settings appear on the display (, or ). - -.8.