FTM84/85 Feature Application IP65 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Llinear adjustment air velocity by computer, analogue output or option RS-485 High-speed, high-precision measurement, fast response Thermistor measurement sensor LCD display air velocity and temperature value Switch multifunction physical quantities:[m/s] [ft/s] [km/h] [mph] [kont] Monitor air velocity in supplying gas, consumption, and dry process in industry process Compressed air consumption measurement Building, factory, clean room, hospitals Semiconductor, electronics, paper, printing, textiles, steel and iron Industry, food, chemical, pharmaceutical, biotechnology industry SWITCH function and RS-485 function Calibration physical quantities, measuring range, analogue output, station, and zero-point OFF SET function Keyboard or RS-485adjustment zewo-point OFF SET function Free calibration software : data logger / record 65535 datas / charts EYC FTM84/85 P/6 ERSION : 08/06/0
Specification Input Electrical sensor type thermal mass flow sensor power supply 8... 35DC &... 30AC air velocity measuring range m/s ; m/s ; 5 m/s ; 0 m/s 0 m/s 40 m/s ; 60 m/s current consumption DC 90m/s ; 0m/s air velocity min. measuring range 0.5 m/s temp. sensor / measuring range PT 000, 0... 80 8 300 4 00 AC 350 4 80 overvoltage protection DC < 45 AC < 40 electrical connection M metal connector / terminal Output output 0... 0 / 4... 0 / Installation 0... DC / 0... 5 DC / 0... 0 DC installation duct / remote default output out : air velocity out : temp. ( default value : 0... 80 ) fix / PT outside thread signal connection 3-wire load resistance current output : 500Ω voltage output : 0KΩ Protection response time reach 90% of ultimate value within 3 sec. rating IP 65 angular dependence < 3% measuring value ( when the angle < 0 ) electric protection polarity protection over-voltage short circuit display type LCD Module with green black light display range upon request, one deimal place Certification double line character ( up : air velocity down : temp. ) CE Certification height of character EN 550 : 009 / A : 00 Group Class B Immunity EN 636- : 006 Accuracy ( + 5 C ) air velocity Emission EN 636- : 006 Class B 5.55mm EN 6000-4-:009.5 % F.S. ( nonlinear error, hysteresis error, EN6000-4-3:006/A:00 repeatability error ) temperature ( > m / s ) 0.3 C thermal sensitivity temp. error 0.05 % / C EN 6000-4-8:00 Material Environment case aluminum alloy air probe SUS working temp. for housing -0... +80 filter POM working temp. for housing with display -0... +60 cable PTFE ( remote FTM85 ) working temp. for probe -0... +00 option metal mounting flange working humidity storage temp. 95 % RH ( non-cond. ) -0... +60 weight FTM84 : 670 g / FTM85 : 78 g proof pressure 0 bar media measured Wind Tunnel Automatic QC System System facility : Wind tunnel system to control air velocity Automatic inspection report printing PC-based automatic controlling air velocity and QC inspection and HMI Use precise wind tunnel to produce products, and automatic QC inspection sheet printing and factory report. EYC FTM84/85 P/6 ERSION : 08/06/0
According to IEC 698 and ISO 705 standard to measuring 3-cycle curve. As the charts result, accuracy of test sample match with accuracy chart of standard source 00.00 40 3- cycle curve( 0m/s ) Testing sample source ( % ) 90.00 80.00 70.00 60.00 50.00 40.00 30.00 0.00 ascending average line descending average line total average line Air elocity (m/s) 0 00 80 60 40 Standard source FTM8X testing sample 0.00 0.00 0.00 0.00 0.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 00.00 0 Standard source ( % ) 0 0 00 400 600 800 000 00 400 Time(Sec) Ordering --------------> Installation Range Output FTM 85-60 - 5 M Modbus Cable ( for remote type ) Option Ordering Item Installation Range Output Modbus Cable Option duct remote 84 85 m/s m/s 5 m/s 0 m/s 0 m/s 40 m/s 60 m/s 90 m/s 0m/s 0 0 05 0 0 40 60 H90 H0 4~0 0~0 0~0 0~5 0~ RS-485 6 7 8 9 analogue RS-485 RS-485 & analogue M type - M (8P) metal connector or N type - M6 cable gland 0 m cable 5 m cable customize 5 W M metal connector ( with m electrical cable ) metal cable gland display other request M N D W EYC FTM84/85 P3/6 ERSION : 08/06/0
unit : mm M type (M-4PIN metal connector RS-485 or analogue M type (M-8PIN metal connector) RS-485+analogue N type (M6 cable gland) RS-485+analogue 4..5 7. FTM84 ( duct ) FTM85 ( remote ) 34mm 04mm 04mm 80mm 95.78mm 3mm 50mm 50mm 80mm 95.78mm 04mm M type 4.3mm M screw thread ( metal fitting thread ) or M6 metal cable gland length as request gauge : 4.7mm 80mm 08.mm 3mm 50mm 8.65mm Ø3.8mm Ømm 45.5mm 4mm N type 8.65mm Ø3.8mm Ømm EYC FTM84/85 P4/6 ERSION : 08/06/0
4P terminal cc GND 8~35 DC & ~30 AC 4 3 brown black white blue 8~35 DC & ~30 AC cc GND Tx Rx 8~35 DC & ~30 AC black white brown 4 3 blue 8~35 DC & ~30 AC cc GND 8~35 DC & ~30 AC Tx Rx 8~35 DC & ~30 AC brown black 7 white 3 blue 8 yellow 6green RS-485 5 GND 4 gray EYC FTM84/85 P5/6 ERSION : 08/06/0
SCADA USB CR-800 USB to RS-485 Converter Device. PC. RS-485 to USB Converter 3. power supply 4. UI software option converter: CR-800 EYC free programmable software http:///download/download49.html HMI transmitter PLC ON Enable/disable Output type Measuring range Device ID ON RSN 3 4 5 6 7 8 For FTM84 /85 products, the setting status of switch will be read by software while power on, and this reading action will not happen later on. Thus in order to read the switch status again by software, the user must to reboot again if re-setting the switch. The function of Switch_ ~ 8 only be effective while setting the switch_ as On.. Switch Active / Deactivate : Set the switch as On/ Off STATUS switch ON OFF 3. Setting the Output Measuring Range : Set the maximum value for analog output (The output physical type must be Air Flow elocity ) Only switch wide to small range Switch 3 Switch 4 Switch 5 RANGE (m/s) 5 0 5 0 40 60. The Type for Analog Output: Analog output type for Out & Out STATUS 0-0 4-0 Switch 4. Setting the Device ID : Set the slave device ID for Modbus RTU. Switch 6 Switch 7 Switch 8 Device ID 3 4 5 6 7 8 EYC FTM84/85 P6/6 ERSION : 08/06/0