Infinite possibilities for your data center The F-Series TeraFrame T M Cabinet System The F-Series TeraFrame Cabinet System from Chatsworth Products, Inc. (CPI) provides configurable thermal management solutions to meet specific data center needs. Infinitely Configurable Personalize cabinets by configuring the options and accessories that work best for your data center. With three widths, 12 heights and 17 depths, there are 612 standard sizes to choose from to customize your solution. Thermal Management Designed specifically to solve thermal issues in your data center using CPI Passive Cooling TM Solutions, the F-Series TeraFrame eliminates the need for expensive cooling equipment with patented thermal control. Cable Management Provides cable management to keep network and power cables separate, control power cord slack and support multiple power strips or PDUs for full power redundancy. Availability Arrives fast and ready to install - cutting your lead-time dramatically and keeping you on schedule. CPI Passive Cooling T M Solutions offer: Flexibility - Uncomplicated moves, adds and changes and configurable to meet specific needs Scalability - Adaptable for increasing density requirements and achieves 2-20+ kw of cooling per cabinet Tier IV Capability - Zero point of failure Minimize Total Cost of Ownership - Maximizes CRAC effectiveness and decreases ongoing maintenance costs For network switches with side-to-side airflow in a hot aisle/cold aisle layout, try the new N-Series TeraFrame Network Cabinet. This cabinet is designed to meet third party specifications for Cisco 6 5 0 0 & 9500 switches. N-Series TeraFrame Cabinet or techsupport@chatsworth.com 800-834-4969
SECTION CHATSWORTH PRODUCTS, INC. FEATURED PRODUCTS Remote Infrastructure Management (RIM-600) System The Remote Infrastructure Management (RIM-600) System monitors and records environmental conditions (temperature, humidity, etc.) in data centers, computer rooms and equipment rooms and contacts you when sensor thresholds are crossed. Each system consists of one Host (base module) and up to 31 Nodes (expansion modules). Each Host/Node connects directly to the network and supports eight external sensors. Monitoring software is included with the Host for easy desktop monitoring and changes. 60000-001 Host Module, 100-250 VAC, 50-60 Hz 60001-002 Node Module, 100-240 VAC, 50-60 Hz 60012-007 Miniature Temperature Sensor, 5 F To 140 F 60052-002 Door Open/Closed Sensor For Cabinets Note: Other sensors available. Electronic Locking System The Electronic Locking System automates access control for the CPI TeraFrame Family of Cabinets with up to five access codes for each door. The basic system consists of a Communications Module, one or several Lock Control Modules and a Lock Upgrade Kit for each door. Each Lock Control Module connects eight Lock Upgrade Kits (four cabinets) to the Communications Module. The Communications Module provides the network connection and control software interface for up to 64 Lock Control Modules and 512 Lock Upgrade Kits (256 cabinets). The Electronic Locking System includes lock control software for easy configuration changes and keeps an electronic record of each cabinet access attempt. 16147-050 Communications Module 16147-052 Lock Control Module For 8 Lock Upgrade Kits (4 Cabinets) 16147-060 Lock Upgrade Kit For TeraFrame Perforated Front Door 16147-063 Lock Upgrade Kit For TeraFrame Rear Door Note: Other lock upgrade kits available. Keypad and Proximity Card Reader Modules also available. N-Series TeraFrame Network Cabinet (2,500 lb Load Rating) The N-Series TeraFrame Network Cabinet provides the solution for placing switches that require sideto-side airflow in hot aisle/cold aisle environments. Offset doors and side panels provide extra cable management space inside the cabinet. The optional Network Switch Exhaust Duct guides hot exhaust air from the right side of the cabinet (switch exhaust) to the rear door, maintaining front-to-rear airflow through the cabinet. NF0K-113C-C42 NF1K-113C-C42 NF2K-113C-C42 NF3K-113C-C42 Cabinet, No Duct, 31.5" W x 83.5" H x 44.2" D, Cabinet, With Duct, 31.5" W x 83.5" H x 44.2" D, Recommended For Cisco 6506, 6509, 6513 And 9509 Switches Recommended For Cisco 9513 Switches Note: Cabinets have square-punched mounting rails, perforated single front and double rear doors, two-point latches with keyed locks, solid top panel with 14 cable pass-through ports and two solid side panels. Maximum mounting rail depth is 25.6" D. Other sizes and colors available.
CABINETS Enclosed Mounting Solutions M-Series MegaFrame Cabinet (2,000 lb Load Rating) F-Series TeraFrame Cabinet (2,500/2,000 lb Load Rating) The M-Series MegaFrame Cabinet System is a bolted aluminum cabinet used to store server, network and data storage equipment in data centers, computer rooms and equipment rooms. The M-Series MegaFrame is available in 24 standard sizes (two widths, three heights and four depths) and includes adjustable depth front and rear equipment mounting rails. Choose mounting rail, door, top and side panel style and color to match your requirements. Thermal and cable management accessories are available. M1033-742 Cabinet, 27.3" W x 84.9" H x 33.6" D, 19" EIA x 45 RMU x 30" D, Black M1053-742 Cabinet, 27.3" W x 84.9" H x 39.6" D, 19" EIA x 45 RMU x 36" D, Black M1043-742 Cabinet, 27.3" W x 84.9" H x 42.6" D, 19" EIA x 45 RMU x 39" D, Black Note: Cabinets have square-punched mounting rails, perforated single front and rear doors, single-point latches with keyed locks, solid top panel with four cable pass-through ports, and two solid side panels. Other styles, sizes and colors available. The F-Series TeraFrame Cabinet System is a welded steel cabinet used to store server and data storage equipment in data centers, computer rooms and equipment rooms. The F-Series TeraFrame is available in 612 standard sizes (three widths, 12 heights and 17 depths) and includes adjustable depth front and rear equipment mounting rails. Choose mounting rail, door, latch (lock), top and side panel style and color to match your requirements. Thermal, power and cable management accessories are available. FF1K-113C-C22 Cabinet, 23.6" W x 83.5" H x 44.2" D, 19" EIA x 45 RMU x 37.4" D, Black FF1K-113C-C22 Cabinet, 27.6" W x 83.5" H x 44.2" D, 19" EIA x 45 RMU x 37.4" D, Black FF2K-113C-C22 Cabinet, 31.5" W x 83.5" H x 44.2" D, 19" EIA x 45 RMU x 37.4" D, Black Note: Cabinets have square-punched mounting rails, perforated single front and double rear doors, two-point latches with keyed locks, solid top panel with four cable pass-through ports, and two solid side panels. Other styles, sizes and colors available. Cabinet Shelves 13380-719 LCD Monitor And Shelf, 4-Post, 19" W x 2 RMU, Includes 0.17" LCD Monitor 13480-719 Keyboard And Tray, 4-Post, 19" W x 1 RMU, Includes Keyboard With Track Pad 11914-719 Sliding Shelf, 19" W x 2 RMU x 32" D, 160 lb Load Rating, For Cabinets 36" Or 39" D 11913-719 Sliding Vented Shelf, 19" W x 2 RMU x 32" D, 160 lb Load Rating, For Cabinets 36" Or 39" D 12610-719 Fixed Vented Shelf, 19" W x 1 RMU x 20" To 36" D, (Telescoping Depth), 100 lb Load Rating -2
CABINETS Enclosed Mounting Solutions Enhanced Cable Managers For Cabinets Air Dam Kits For Cabinets Enhanced Vertical Managers organize cables by rack-mount space, making it easier to trace individual cables during moves, adds and changes. Additionally, two Enhanced Vertical Managers can be connected with Front-to-Back Managers (as shown) to create a complete pathway for patch cords that connect network switches and computers within the same or adjacent cabinets. ENHANCED VERTICAL CABLE MANAGERS 13171-700 For 27.3" W M-Series MegaFrame Cabinet, 84" H x 3.5" W x 5.2" D, Black 34421-C01 For 23.6" W F-Series TeraFrame Cabinet, 84" H x.76" W x 9.3" D, Black 34441-C51 For 27.6" W F-Series TeraFrame Cabinet, 84" H x 2.7" W x 10.1" D, Black 34441-C01 For 27.6" W F-Series TeraFrame Cabinet, 84" H x 2.7" W x 12.6" D, Black 34441-C52 For 31.5" W F-Series TeraFrame Cabinet, 84" H x 4.6" W x 10.1" D, Black 34441-C02 For 31.5" W F-Series TeraFrame Cabinet, 84" H x 4.6" W x 12.6" D, Black Note: Each cable manager reduces mounting rail depth in the cabinet by approximately 7". Reduce mounting rail depth by 14" if cable managers are placed at the front and back of the cabinet as shown in the graphic above. FRONT-TO-REAR MANAGERS 13169-701 For 27.3" W M-Series MegaFrame Cabinet, 2.3" H x 1.7" W, 2 Each, Black 34541-C01 For 27.6" W F-Series TeraFrame Cabinet, 2.3" H x 2.3" W, 2 Each, Black 34551-C01 For 31.5" W F-Series TeraFrame Cabinet, 3.8" H x 4.2" W, 2 Each, Black Note: Other sizes available. Not available for 23.6" W F-Series TeraFrame Cabinets. Air Dam Kits guide cool air to the front of equipment and isolate heated exhaust air at the rear of the cabinet. Use Air Dam Kit with perforated front and rear doors when cooling air enters through the front of the cabinet. For best results, close all open rack-mount spaces in the rack with filler panels. AIR DAM KITS 13336-710 For 27.3" W x 84.9" H, M-Series MegaFrame Cabinet, 5" D, Black 34521-C05 For 23.6" W x 83.5" H, F-Series TeraFrame Cabinet, Black 34522-C05 For 27.6" W x 83.5" H, F-Series TeraFrame Cabinet, Black 34523-C05 For 31.5" W x 83.5" H, F-Series TeraFrame Cabinet, Black Note: Air Dam Kit reduces the front mounting rail depth by approximately 1.7" in F-Series TeraFrame Cabinet. SNAP-IN FILLER PANELS 34537-001 19" EIA x 1 RMU, 6 Each, Black 34538-001 19" EIA x 2 RMU, 6 Each, Black Note: Other styles and sizes available. Use in CPI Cabinets with 19" EIA square-punched mounting rails. -3
SOLUTIONS Open Mounting Solutions QuadraRack Server Frame (1,000 lb Load Rating) QuadraRack 4-Post Frame (2,000 lb Load Rating) Fixed depth four-post racks that provide open front and rear support for large, heavy rack-mount equipment like modular network switches. Choose threaded (4-Post Frame) or squarepunched (Server Frame) equipment mounting holes. Cable management accessories are available. 50120-703 4-Post Frame, 19" W x 7' H x 29" D, 50120-7 4-Post Frame, 19" W x 8' H x 29" D, 50120-708 4-Post Frame, 19" W x 9' H x 29" D, 053-703 Server Frame, 19" W x 7' H x 29" D, Adjustable QuadraRack (2,000 lb Load Rating) Adjustable ServerRack (2,000 lb Load Rating) Adjustable depth four-post racks that provide open front and rear support for large, heavy rack-mount equipment like modular network switches. The front and rear mounting channels adjust in depth during assembly by.98" (25 mm) increments to match equipment requirements. Each rack has seven depth settings. Choose threaded (QuadraRack ) or square-punched (ServerRack) equipment mounting holes. Cable management accessories are available. 2-703 QuadraRack, 19" W x 7' H,.75"-21.65" D, 216-703 QuadraRack, 19" W x 7' H, 22.64"-28.54" D, 217-703 QuadraRack, 19" W x 7' H, 29.53"-35.43"D, 218-703 QuadraRack, 19"W x 7' H, 36.42"-42.32" D, 211-703 ServerRack, 19" W x 7' H,.75"-21.65" D, 212-703 ServerRack, 19" W x 7' H, 22.64"-28.54" D, Adjustable ServerRack (2,000 lb Load Rating) (Continued) 213-703 ServerRack, 19" W x 7' H, 29.53"-35.43" D, 214-703 ServerRack, 19" W x 7' H, 36.42"-42.32" D, Note: Other sizes and colors available. Standard Rack (1,000 lb Load Rating) Universal Rack (1,500 lb Load Rating) Standard Rack and Universal Rack are twopost racks used to support patch panels and other network equipment in data centers, computer rooms and equipment rooms. Aluminum racks bolt together and have 3" or 6" deep C-shaped threaded mounting channels with marked and numbered RMU spaces. Cable management accessories are available. 48353-703 Universal Rack, 19" W x 84" H, 48353-7 Universal Rack, 19" W x 96" H, 51 RMU, Black 48353-708 Universal Rack, 19" W x 108" H, 58 RMU, Black 66353-703 6" Deep Standard Rack, 19" W x 84" H, 55053-703 Standard Rack, 19" W x 84" H, 55053-7 Standard Rack, 19" W x 96" H, 51 RMU, Black 55053-708 Standard Rack, 19" W x 108" H, 58 RMU, Black 40604-003 Installation Kit, Concrete Slab Note: Other sizes and colors available. Racks are UL Listed. Rack Shelves 40074-700 Single-Sided, 19" EIA x 3 RMU, 17.25" W x 14.8" D, 50 lb Load, Black 40108-719 Double-Sided, 19" EIA x 4 RMU, 17.75" W x 21.5" D, 100 lb Load, Black 11054-719 Double-Sided, 19" EIA x 5 RMU, 17.75" W x 25.8" D, 0 lb Load, Black 11164-719 Double-Sided, 19" EIA x 5 RMU, 17.75" W x 19.8" D, 200 lb Load, Black 40605-005 Mounting Screws, #12-24, 50 Each, Black Note: Other styles, sizes and colors available. Use Double-Sided Shelves with 3" deep racks. Shelves are UL Listed. -4
SOLUTIONS Rack Cable Management Global Standard Pack (1,000 lb Load Rating) The Global Standard Pack is an easy-to-use solution for managing equipment and cabling at the cross connect. It includes one CPI Standard Rack, a concrete floor installation kit, and one or two 6.76" D CPI Global Vertical Cabling Sections packaged in a single carton. Rack holds 1,000 lb of equipment. 57001-X03 Rack with (1) 3.65" W Global Vertical Cabling Section 57002-X03 Rack with (2) 3.65" W Global Vertical Cabling Sections 57003-X03 Rack with (1) 6" W Global Vertical Cabling Section 57004-X03 Rack with (2) 6" W Global Vertical Cabling Sections Note: X = color: 5 = clear, 7 = black Universal Horizontal Cable Manager 19" wide rack-mount cable manager for use above patch panels and interconnect switches to organize patch cords. Use with GVCS Global Vertical Cabling Section, CCS Combination Cabling Section and MCS Master Cabling Section. 30339-719 1 RMU, 19" W, Deep, Black 30330-719 2 RMU, 19" W, Deep, Black 30331-719 3 RMU, 19" W, Deep, Black 30139-719 1 RMU, 19" W, Black 30130-719 2 RMU, 19" W, Black 30131-719 3 RMU, 19" W, Black Note: Open ring-style managers also available. Use deep versions with MCS Master Cabling Section and 3" deep Standard or Universal Racks. CCS Combination Cabling Section Provides a vertical cable pathway in between equipment racks. Double-sided trough includes a closed front-side pathway for patch cords and an open rear-side pathway for premise cables. Front-side features 1 RMU openings for patch cords that align with rack-mount spaces on the rack and a removable door that opens right or left and latches closed. Rear-side features swivel latch closures spaced vertically every 12". Available in three widths and three heights, select to match the style of rack. CCS Combination Cabling Section (Continued) USE WITH STANDARD AND UNIVERSAL RACKS 30161-703 CCS, 3.65" W x 84" H x 12.24" D, Black 30161-7 CCS, 3.65" W x 96" H x 12.24" D, Black 30161-708 CCS, 3.65" W x 108" H x 12.24" D, Black 30162-703 CCS, 6" W x 84" H x 12.24" D, Black 30162-7 CCS, 6" W x 96" H x 12.24" D, Black 30162-708 CCS, 6" W x 108" H x 12.24" D, Black 30163-703 CCS, 10" W x 84" H x 12.24" D, Black 30163-7 CCS, 10" W x 96" H x 12.24" D, Black 30163-708 CCS, 10" W x 108" H x 12.24" D, Black USE WITH 6" DEEP STANDARD RACKS 30164-703 CCS, 3.65" W x 84" H x 14.61" D, Black 30165-703 CCS, 6" W x 84" H x 14.61" D, Black 30166-703 CCS, 10" W x 84" H x 14.61" D, Black MCS Master Cabling Section Use MCS to organize large quantities of cable. Cable openings align with each rack-mount space on the rack. Includes front and rear door/covers that hinge open to the right or left and latch closed. Double-sided MCS are available in three widths and two depths. Select MCS to match the height of the rack. Rear door/cover removed to show cable openings in photo. 30095-703 MCS, Double-Sided, 6" W x 84" H x 16.2" D, Black 30096-703 MCS, Double-Sided, 10" W x 84" H x 16.2" D, Black 40095-703 MCS, Double-Sided, 6" W x 84" H x 21.2" D, Black 40096-703 MCS, Double-Sided, 10" W x 84" H x 21.2" D, Black 40097-703 MCS, Double-Sided, 12" W x 84" H x 21.2" D, Black Note: Other sizes available. Single-sided versions are also available. GVCS Global Vertical Cabling Section A single-sided cabling section that can be used back-to-back or with cable rings to create a solution similar to CCS. GVCS has cable openings that align with each rack-mount space on the rack and includes a snap on cover to protect cables. 12831-703 GVCS, Single-Sided, 6" W x 84" H x 6.7" D, Black 12833-703 GVCS, Single-Sided, 6" W x 84" H x 9.3" D, Black 12830-703 GVCS, Single-Sided, 3.6" W x 84" H x 6.7" D, Black 12832-703 GVCS, Single-Sided, 3.6" W x 84" H x 9.3" D, Black 12836-702 Cable Rings for 6" W GVCS 12836-701 Cable Rings for 3.6" W GVCS -5
SOLUTIONS Wall-Mount CUBE-iT PLUS Cabinet System (200 lb Load Rating) Standard Swing Gate Wall Racks (100 lb Load Rating) CUBE-iT Plus Cabinet System features a 5" deep rear panel with eight cable entry ports (four top, four bottom). The body of the cabinet swings open for ease of access to the rear of rackmounted equipment. CUBE-iT includes one pair of 19" wide threaded #12-24 equipment mounting rails that are adjustable front-to-rear within the body of the cabinet and supports up to 200 pounds of equipment. The front door and body are keyed alike, and the door is available with a solid metal or smoked plexiglass panel. Choose from three heights (24", 36", 48"), four depths (13", 18", 24", 30"), and two colors. 13265-724 CUBE-iT PLUS, 24" W x 24" H x 13" D, 12 RMU, Metal Door, Black 13275-724 CUBE-iT PLUS, 24" W x 24" H x 13" D, 12 RMU, Plexiglass Door, Black 11890-724 CUBE-iT PLUS, 24" W x 24" H x 18" D, 12 RMU, Metal Door, Black 11901-724 CUBE-iT PLUS, 24" W x 24" H x 18" D, 12 RMU, Plexiglass Door, Black 11840-724 CUBE-iT PLUS, 24" W x 24" H x 24" D, 12 RMU, Metal Door, Black 11900-724 CUBE-iT PLUS, 24" W x 24" H x 24" D, 12 RMU, Plexiglass Door, Black 11996-724 CUBE-iT PLUS, 24" W x 24" H x 30" D, 12 RMU, Metal Door, Black 12419-724 CUBE-iT PLUS, 24" W x 24" H x 30" D, 12 RMU, Plexiglass Door, Black Note: Other sizes and colors available. Larger 1,000 lb capacity wall and floor-supported cabinets are also available. Perfect for installing small quantities of equipment in confined spaces, Swing Gate Racks are available in various sizes to meet your networking needs. Easy to install, the frame attaches at 16" centers and the gate features spring loaded latches. Swing Gate has C-shaped mounting rails with marked and numbered RMU spaces, threaded front and rear just like a freestanding rack, can open to the right or left, and will support 100 pounds of equipment in both the open and closed positions. Heavy Duty Swing Gate Kit increases load bearing capacity to 0 lb. 11790-718 Swing Gate, 19" W x 24.5" H x 18" D, 13 RMU, Black 11791-718 Swing Gate, 19" W x 38.5" H x 18" D, 21 RMU, Black 11807-718 Swing Gate, 19" W x 49.0" H x 18" D, 27 RMU, Black 11792-718 Swing Gate, 19" W x 73.5" H x 18" D, 41 RMU, Black 11799-001 Cable Rings, Set Of 6, Black 12795-701 Heavy Duty Swing Gate Kit, Black Note: Other sizes and colors available. Fixed Wall-Mount Equipment Rack (200 lb Load Capacity) Similar to the Standard Swing Gate Wall Rack but with fixed equipment mounting channels, Fixed Wall-Mount Equipment Rack doubles the load bearing capacity to 200 pounds. Use it to support heavier switches and equipment. Some models can be ordered with an enclosure. 11960-718 Fixed, 19" W x 24.5" H x 18" D, 13 RMU, Black 11961-718 Fixed, 19" W x 38.5" H x 18" D, 21 RMU, Black 11962-718 Fixed, 19" W x 73.5" H x 18" D, 41 RMU, Black 11799-001 Cable Rings, Set Of 6, Black Note: Other sizes and colors available. -6
SOLUTIONS Building Entrance & Cable Pathway Cable Runway Cable Runway Supports (Continued) PART NO. 11310-003 Threaded Ceiling Kit 10506-716 Cabinet Elevation Kit, 4" - 6" H 11309-001 Foot Kit 10595-712 Rack Mounting Plate, 12" W 10595-718 Rack Mounting Plate, 18" W 12408-724 Rack Mounting Plate, 24" W 10506-706 Rack Elevation Kit, 4" - 6" H 10608-001 Vertical Wall Brackets, 1 Pair 10250-712 Universal Cable Runway, 12" W x 9'-11.5" L, Black 10250-718 Universal Cable Runway, 18" W x 9'-11.5" L, Black 10250-724 Universal Cable Runway, 24" W x 9'-11.5" L, Black Cable Runway Accessories Cable Runway Pathway Components 10822-712 E-Bend, 12" W 10822-718 E-Bend, 18" W 10723-712 Outside Radius Bend, 12" W 10723-718 Outside Radius Bend, 18" W 10723-724 Outside Radius Bend, 24" W 11959-7 Corner Bracket, " x " 11959-724 Corner Bracket, 24" x 24" 12100-706 Cross Member Radius Drop, 6" W 12100-712 Cross Member Radius Drop, 12" W 12100-718 Cross Member Radius Drop, 18" W 10642-001 End Caps, 1 Pair 13392-711 Runway Dividers, 5 Pack 13392-712 Runway Dividers, 25 Pack Cable Runway Splices Cable Runway Supports 11301-001 Butt Splice Kit 11302-001 Junction Splice Kit 11421-712 Wall Angle Support Kit, 12" W 11421-718 Wall Angle Support Kit, 18" W 11421-724 Wall Angle Support Kit, 24" W 11746-712 Triangular Support Kit, 12" W 11746-718 Triangular Support Kit, 18" W 11746-724 Triangular Support Kit, 24" W 12362-712 Center Support Kit, 12" W 12362-718 Center Support Kit, 18" W 12362-724 Center Support Kit, 24" W 11440-002 Threaded Rod, 5/8-11 x 6' L 10557-003 I-Beam Clamp for 5/8-11 Rod PatchRack for CPI Cable Runway 13395-708 Patch Panel Rack, 19" W x 8 RMU 13396-208 D-Ring Kit, 10 Pack -7
SOLUTION Building Entrance & Cable Pathway FASTTRAC Cable Tray Create point-to-point pathway Use under raised floor or overhead East to cut and form Fast to install Zinc electroplating allows use within plenum space UL classified as equipment grounding conductor 2" HEIGHT 5' LONG 10' LONG 13340-004 13341-004 4" W x 2" H, Zinc 13340-006 13341-006 6" W x 2" H, Zinc 13340-008 13341-008 8" W x 2" H, Zinc 13340-012 13341-012 12" W x 2" H, Zinc 13340-016 13341-016 16" W x 2" H, Zinc 13340-018 13341-018 18" W x 2" H, Zinc 13340-020 13341-020 20" W x 2" H, Zinc 13340-024 13341-024 24" W x 2" H, Zinc 4" HEIGHT 5' LONG 10' LONG 13342-004 13343-004 4" W x 4" H, Zinc 13342-006 13343-006 6" W x 4" H, Zinc 13342-008 13343-008 8" W x 4" H, Zinc 13342-012 13343-012 12" W x 4" H, Zinc 13342-016 13343-016 16" W x 4" H, Zinc 13342-018 13343-018 18" W x 4" H, Zinc 13342-020 13343-020 20" W x 4" H, Zinc 13342-024 13343-024 24" W x 4" H, Zinc 6" HEIGHT 5' LONG 10' LONG 13342-008 13343-008 8" W x 6" H, Zinc 13342-012 13343-012 12" W x 6" H, Zinc 13342-016 13343-016 16" W x 6" H, Zinc 13342-018 13343-018 18" W x 6" H, Zinc 13342-020 13343-020 20" W x 6" H, Zinc 13342-024 13343-024 24" W x 6" H, Zinc SUPPORTS AND FASTENERS 13354-004 Center Support Bracket, 4" W, for 3/8" Rod 13354-008 Center Support Bracket, 6"-8" W, for 3/8" Rod 13354-012 Center Support Bracket, 12" W, for 3/8" Rod 13354-016 Center Support Bracket, 16" W, for 3/8" Rod 13354-020 Center Support Bracket, 18"-20" W, for 3/8" Rod 13354-024 Center Support Bracket, 24" W, for 3/8" Rod 13357-008 Intersect Support Plate, 4"-8" W 13357-016 Intersect Support Plate, 12"-16" W 13357-024 Intersect Support Plate, 20"-24" W 13356-004 Triangle Support Bracket, 4" W 13356-008 Triangle Support Bracket, 6"-8" W 13356-012 Triangle Support Bracket, 12" W 13356-016 Triangle Support Bracket, 16" W 13356-020 Triangle Support Bracket, 18"-20" W 13356-024 Triangle Support Bracket, 24" W 13387-008 Wall Termination Support, 4"-8" W 13387-016 Wall Termination Support, 12"-16" W 13387-024 Wall Termination Support, 18"-24" W 13350-020 Under Floor Support Bracket, 20" W x 3" H 13351-020 Under Floor Support Bracket, 20" W x 6" H 13352-020 Under Floor Support Bracket, 20" W x 9" H 13367-001 Wire Shear 13369-001 Wire Bender 13368-001 Cable Roller 13361-001 Ground Washer Kit, 50 Pack (Use Over Supports) 13374-001 Pedestal Clamp 13364-001 Washer Splice Kit, 50 Pack (Use Mid-span) 13365-001 Splice Bars, 50 Pack (Use With Trays 12" W And Over) Note: Other options available. -8
SOLUTION Zone and Wireless Enclosures 2' x 4' Ceiling Enclosures (85 lb Load Rating) 2' x 4' Ceiling Enclosures create a space within the drop ceiling for consolidation points or active cross connects. Ceiling enclosures can be used within an air handling space. A fully hinged access door and internal brackets provide support for 110-style blocks, patch panels or active equipment. All models have four cable access ports that include foam sealing kits. The active equipment model includes an electrical junction box and internal fan. A1224-LP A1224-PP A1224-HR For 110-blocks, 2 x 300-pair For Patch Panels, 2 x 4 RMU For Active Equipment, 2 x 4 RMU Ceiling-Mounted Wireless Enclosures Wireless networks are becoming more common in office spaces. Wireless enclosures create spaces within the drop ceiling for wireless access points providing added physical security for the access points and the associated network connections. Wireless enclosures are easy to install and can be used in air handling spaces to support access points up to 10" W x 8" D x 2" H. Antennas pass through holes on the interchangeable faceplate in the access door providing maximum coverage of the workspace below. The new Universal Faceplate works with most access points providing a 10" L x 1" W slot for antennas. Also available with an electrical junction box. AAT-CAP-UNI-KIT AAT-CAP-00-KIT AAT-CAP-35-KIT AAT-CAP-12-KIT Note: Other styles and sizes available. 10" Enclosure With Universal Faceplate 10" Enclosure With Blank Faceplate 10" Enclosure With CISCO 350 Faceplate 10" Enclosure With CISCO 1200 Faceplate ThinLine II Wall-Mount Cabinet ThinLine II Wall-Mount Cabinet is a low profile wall-mount cabinet that projects less than 12" from the wall. Equipment hangs vertically within the cabinet on adjustable mounting rails. ThinLine II provides an easy way to secure a consolidation point or a small crossconnect. ThinLine II includes an internal 2" x 4" junction box for a power outlet and will support 100 pounds of equipment. There are knockouts for 3/4" and 1/2" conduit and airflow louvers along the sides. The door has a keyed lock and can be hinged to open from the right or left side. An internal ventilation fan is available as an accessory. 13050-711 Cabinet, 26" W x 26" H x 5" D, 19" EIA x 2 RMU, Black 13050-712 Cabinet, 26" W x 26" H x 8.5" D, 19" EIA x 4 RMU, Black 13050-713 Cabinet, 26" W x 26" H x 12" D, 19" EIA x 6 RMU, Black 13051-001 Fan For 4 RMU Or 6 RMU Cabinet 13051-002 Fan For 2 RMU Cabinet Note: Other sizes and colors available. -9