Freescale Semiconductor Reliability & Qualifications RQA33897 Rev. 2.0, 8/2006 MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents The device(s) in this document successfully completed qualification requirements per applicable industry standards. This Reliability and Quality document contains the associated Part Submission Warrant form(s) as verification. Contents Quality Requirements... 2 Requesting Additional Qualification Information... 2 Part Submission Warrant(s)... 3-7 It is understood that the customer is accepting the associated Freescale datasheet(s) as the technical specifications for the device(s) covered in this document. To locate device datasheets, go to www.freescale.com and click on Documentation.
Quality Requirements Freescale Semiconductor Inc. has a long history of serving the commercial, industrial, and automotive markets. Freescale achieved QS9000 certification status in July 1998 and ISO/TS16949 certification status in May 2004. Freescale has vast experience with the automotive industry s harsh qualification requirements/expectations. AEC-Q100 is used as the basis for our product stress test qualifications. (Products introduced prior to July 1998 may have limited qualification or other data available). This Reliability and Quality document contains the associated Part Submission Warrant form(s) for the following device(s): Part Number Qualification State/ Description Package Description (Pin Count) Silicon Revision Quality Tracking Number Status MC33897TEF/R2 Initial Qualification TSMC 14 SOIC 1.0 APDPPAP0327 Active MC33897TD/R2 Initial Qualification TSMC 14 SOIC 1.0 APDPPAP0326 Active MC33897AD/R2 Initial Qualification 14 SOICN 2.4 APDPPAP0216 Active MC33897AEF/R2 MC33897BEF/R2 Initial Qualification Pb-free, RoHS Initial Qualification Pb-free, RoHS 14 SOICN 2.4 APDPPAP0217 Active 8 SOICN 2.4 APDPPAP0234 Active MC33897D/R2 Initial Qualification 14 SOICN 2.3 APDPPAP0204 Active MC33897EF/R2 Initial Qualification Pb-free, RoHS 14 SOICN 2.3 APDPPAP0177 Active Requesting Additional Qualification Information If additional information is required beyond the Part Submission Warrant form(s), please register and submit an online web Service Request at http://www.freescale.com/webapp/sps/site/homepage.jsp?nodeid=054670. In your request, clearly state your qualification requirements per the following table: AUTOMOTIVE INDUSTRIAL CONSUMER QualPack1 Warrant Form Warrant Form Warrant Form QualPack 2 (STD Doc Package Only No Data Modifications) QualPack 3 (Special Request) Production Part Approval Process documents (referencing MC part number only) not included in QualPack1 above: High Level Manufacturing Flow Chart Failure Mode Evaluation Analysis / Control Plans Manufacturing Gage Repeatability & Reproducibility Electrical parameters Cpk Physical dimension Cpk Reliability Qualification Results Summary Failure Analysis & Corrective Action, if applicable Certificate of Device Construction, and Qualification Special requests or additional data not covered by any of the above may be available on a fee-for-service basis. Contact your local sales person or marketing representative for more information and fee determination. Please specify Customer specific quality information needed. Reliability Qualification Results Summary Special requests or additional data not covered by any of the above may be available on a fee-for-service basis. Contact your local sales person or marketing representative for more information and fee determination. Please specify Customer specific quality information needed. Reliability Qualification Results Summary Special requests or additional data not covered by any of the above may be available on a fee-for-service basis. Contact your local sales person or marketing representative for more information and fee determination. Please specify Customer specific quality information needed. MC33897 Reliability and Quality Document 2 Freescale Semiconductor
MC33897AD/R2 Part Submission Warrant
MC33897AEF/R2 Part Submission Warrant Part Name Single Wire Can (SWCAN Pass 2.4 Lead Free) Part Number MC33897AEFR2 Safety and/or Government Regulation Yes No Engineering Drawing Change Level 7 Dated 10/2004 Additional Engineering Changes None Dated N/A Shown on Drawing No MC33897 Purchase Order No. N/A Weight (kg) N/A Checking Aid No N/A Engineering Change Level N/A Dated N/A SUPPLIER MANUFACTURING INFORMATION SUBMISSION INFORMATION Freescale N/A Dimensional Materials/Functional Appearance Supplier Name & Supplier Code 2100 East Elliot Road Customer Name/Division Various Street Address Buyer/Buyer Code Various Tempe, AZ 85284 Application Various City/State/Postal Code Note: Does this part contain any restricted or reportable substances Yes No Are plastic parts identified with appropriate ISO marking codes Yes No REASON FOR SUBMISSION Initial Submission Engineering Change(s) Tooling: Transfer, Replacement, Refurbishment, or additional Correction of Discrepancy Tooling Inactive > than 1 year Change to Optional Construction or Material Sub-Supplier or Material Source Change Change in Part Processing Parts Produced at Additional Location Other - please specify REQUESTED SUBMISSION LEVEL (Check one) Level 1 - Warrant only (and for designated appearance items, an Appearance Approval Report) submitted to customer Level 2 - Warrant with product samples and limited supporting data submitted to customer. Level 3 - Warrant with product samples and complete supporting data submitted to customer. Level 4 - Warrant and other requirements as defined by customer. Level 5 - Warrant with product samples and limited supporting data reviewed at supplier s manufacturing location. SUBMISSION RESULTS The results for dimensional measurements material and functional tests appearance criteria statistical process package These results meet all drawing and specification requirements: Yes NO (If NO Explanation Required) Mold / Cavity / Production Process Refer to CofDC DECLARATION I hereby affirm that the samples represented by this warrant are representative of our parts, have been made to the applicable Production Part Approval Process Manual 3 rd Edition Requirements. I further warrant these samples were produced at the production rate of N/A / 8 hours. I have noted any deviations from this declaration below: EXPLANATION/COMMENTS: This is for the initial qualification for the SWCAN Pass 2.4 Lead Free for various customers. Print Name Clare Hakeman Title Phoenix NPI Quality Phone No. (480)413-3006 FAX No. (480)413-4150 Supplier Authorized Signature Clare Hakeman (Electronic signature) Date 07APR2005 FOR CUSTOMER USE ONLY (IF APPLICABLE) Part Warrant Disposition: Approved Rejected Part Functional Approval Approved Other Waived Customer Name Customer Signature Date July The original copy of this document shall remain at the suppliers location Optional: Customer tracking 1999 CFG-1001 While the part is active. Number:# N/A FreescaleTracking Number: APDPPAP0217
MC33897BEF/R2 Part Submission Warrant
MC33897D/R2 Part Submission Warrant
MC33897EF/R2 Part Submission Warrant
How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics of their non-rohs-compliant and/or non-pb-free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale s Environmental Products program, go to http://www.freescale.com/epp. Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customer s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the product. Learn More: For more information about Freescale products, please visit www.freescale.com. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. RQA33897 Rev. 2.0