30X Optical Zoom IP Mini Speed Dome NTSC: 720 x 480 @ 30fps, PAL: 720 x 575 @ 25fps 300X Zoom (30X Optical, 10X Digital) Open API For Easy Integration ONVIF 1.02, Onvif Profile S Support True Mechanical Day and Night (ICR) Pan 360 Endless Rotation, Tilt 180 Vector scan 210 Preset Positions (except Short-cut command) Standard protocols including Pelco-D / P Key Features 210 Preset Positions (except Short-cut command) 8 Auto Scans, 8 Patterns, 8 Tours consist of Presets, Patterns and Scans 1 Alarm Input, 1 Alarm Output (Off / NC / NO) Programmable PTZ speed: Proportional to zoom ratio, changeable preset speed Multilingual OSD 8 Private Mask Zone Standard protocol including Pelco-D / P Up to 255 Camera ID PoE Class 4 / AC24V Dual General Feature Diagram
General Feature Diagram Optional Mounts (Wall Mount) Wall Mount: KA-WM110 This mount can be installed directly to a wall. It has cable feed through holes access in the middle of the mount.
Optional Mounts (Wall Pipe Mount) Wall Pipe Mount: KA-WPP200 This mount can be installed directly to a wall. It has cable feed through holes access in the middle of the mount. Camera Adapter (KA-CM110) for installing, analog PTZ cameras (KPT-SPDN300 and KPT-SPDN231), is included. KA-CM110 (Camera adapter) is included.
Optional Mounts (Ceiling Mount) Ceiling Mount: KA-CPP200 This mount can be installed directly to a ceiling. It has cable feed through holes access in the middle of the mount. Camera Adapter (KA-CM110) for installing, analog PTZ cameras (KPT-SPDN300 and KPT-SPDN231), is included. KA-CM110 (Camera adapter) is included.
Optional Mounts (Corner Mount) Pole Mount: KA-CMA100 This mount can be installed to a corner. It has cable feed through holes access in the middle of the mount. KA-WPP200 (Wall pipe mount) is required to install PTZ. Optional Mounts (Pipe Mount) KA-WPP200 is required. Pipe Mount: KA-PMA100 This mount can be installed to a pipe. It has cable feed through holes access in the middle of the mount. KA-WPP200 (Wall pipe mount) is required to install PTZ. KA-WPP200 is required.
Optional Mounts (Parapet Mount) Parapet Mount: KA-PMB600 This mount can be installed directly to a roof parapet or similar structure and onto roof. The mount allows the mounted equipment to be swiveled in toward the roof to provide access for convenient rooftop servicing or adjustment. KA-CM110 (Camera adapter) is included.
Technical Specification Model Image Device Lens View Angle Approx Minimum Illumination Video Codec Resolutions Video Streaming Image Settings KPT-SPDNi300 1/4 SONY Super HAD CCD II 30X Optical / 10X Digital Zoom (Auto Focus) Approx. 52.4 (Wide end) to 4.62 (Tele end) 1.0Lux H.264 Main Profile Motion JPEG NTSC: 720x480@30fps / PAL: 720x576@25fps Simultaneous Motion JPEG and H.264 Controllable frame rate and bandwidth Constant and variable bit rate (H.264) Mirror : Horizontal, Vertical Compression level : 100 (Motion JPEG) Viewer Magnification : 0.5x, 1x, 1.5x, 2x Overlay capabilities : time, date, text, privacy mask Audio streaming Audio Codec Audio input / Output Security Supported Protocols API Intelligent Video Alarm Triggers Alarm Events Web Viewer Tow-way, Full Duplex G.711, G726 External Microphone Line Input / Output Multiple user access levels with password protection IP address filtering: Deny, Allow IPv4, HTTP, HTTPS, TCP, RTSP, RTP, UDP, IGMP, RTCP, SMTP, FTP, ICMP, DHCP, ARP, DNS, DDNS, UPnP Open API for software integration, including API, SDK Video motion detection Intelligent video, external inputs, manual triggers, Network Fail, Reboot, Schedule File upload via FTP, e-mail Notification via e-mail External output activation Video format change Stream play / stop Snapshot Instant recording (Max 5. minutes) Manual trigger
Model Web Viewer KNC-SPDNi120HD Output control Screen magnification Status indicator (video, record, alarm, motion) Pan Angle 360 Continuous rotation Tilt Range 0~ 180 Speed Maximum Preset Speed : 360 /sec Flip Rotate 180 at bottom of tilt Auto Scan 8 Auto Scan include vector scan Preset Position 210 position Tour 8 Tour (Preset, Pattern, Scan) Pattern 8 Pattern Enclosure Alloy case IP Rating IP66 (Weather proof) CPU : ARM 926EJ-S RAM : 128 MB Processors and Memory Flash : 64 MB Real-time clock with backup battery Power PoE Class 4 (IEEE 802.3af Type 2), AC 24V RJ-45 for Ethernet 10baseT/100baseTX with PoE Terminal block : -RS485 TX/RX -alarm input Interfaces -alarm out (NO/NC) 3.5 mono jack for MIC or Line output 3.5 mono jack for Line output connector for Service Video 3.5mm power input : AC24V -10 ~50 Operating Temperature Heater On : -40 ~ +10 Heater ( Bult-in ) On/Off : 0 ~ 10 Operating Humidity 80% RH Storage Temperature -20 ~60 / 90% Dimension Ø154 x 138(H)mm(Bubble Dome Ø112) Weight Accessories 1.5kg Installation Guide, CD with installation and management tools, CMS software, installation guide and User s guide Last updated: 8/22/12