Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart

Similar documents
UNISONIC TECHNOLOGIES CO., LTD UH266

PT V Single coil Hall Driver IC with FG output

SS3144 Unipolar Hall-Effect Digital Switch

PT3907 Hall Driver IC

PT V Single coil Hall Driver IC with RD output

SS443 Unipolar Hall-Effect Digital Switch

Industry Product Group

TSH181 General Purpose Hall Effect Latch

TMR1202. General Description. TMR Bipolar Switch. Features and Benefits. Applications

Specifications. Ratio-metric Linear Hall Effect Sensor

PT3651 General purpose Hall-effect Latch

SS1438 Unipolar Hall Switch

Micro power Unipolar Hall Effect Switch

Industry Product Group

HL2430/2432/2434/2436

Applications Solid state switch Brushless DC motor commutation Speed sensing Linear position sensing Angular position sensing

LB1668, 1668M, LB1667, 1667M

US1881 CMOS Multi-purpose latch

US72/73 Single Coil Fan Driver

2 keys Touch Pad Detector IC

ZA85183/A. Application. Marking Information. Ordering information ZA8518. Revision 0.3 Page 1/7

SS249 CMOS Omnipolar High Sensitivity Micropower Hall Switch

EDL-0A 2.5V CW LASER DIODE DRIVER

SS246 CMOS High Sensitivity Micropower Hall Latch

Maximum Power Dissipation 0.67W Operating Temperature Range 40 C to 85 C Storage Temperature Range 55 C to 150 C

TD62M8600FG TD62M8600FG 8CH LOW SATURATION VOLTAGE SOURCE DRIVER FEATURES SCHEMATICS PIN CONNECTION (TOP VIEW)

Chopper Stabilized Precision Hall Effect Switches

DS1810 5V EconoReset with Push-Pull Output

LB1846MC APPLICATION NOTE LB1846MC. SANYO Semiconductors

LA6583MC. Monolithic Linear IC Fan Motor Driver BTL Driver Single-Phase Full-Wave. Ordering number : ENA

SiGe:C LOW NOISE AMPLIFIER FOR GPS

SS400 Series. Please refer to SS400 Series Order Guide on page 7 for details.

KA3082. Bi-Directional DC Motor Driver. Features. Description. Target Applications. Ordering Information.

LB1868M. Specifications Absolute Maximum Ratings at Ta = 25 C. Monolithic Digital IC 2-phase Brushless Fan Motor Driver. Ordering number : EN6203A

5-channel BTL Driver for DVD player AM5890S

PRODUCT SPECIFICATION

High-side Power Distribution Switch NCT3521U

200 ma 36 V Input Ultra Low Supply Current VR for Automotive Applications

ACE577C 40V 150mA Low Consumption Linear Regulator Description

Parameter Symbol Conditions Ratings Unit Supply voltage +B6 max 45 V. Output block supply voltage +B3 max 92 V

BCT Channel LED Driver (Common-Anode & Common-Cathode) Low Dropout Current Source & Current Sink. General Description. Features.

SPEC NO: DSAJ9211 REV NO: V.6B DATE: SEP/06/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:

Tilt Sensor Switch. Item No. RBS Description Photoelectric Version 4 Page 1 of 10 Publish Date Jun. 26, 2018

Helix Semiconductors HS200 Data Sheet

LB1868. Specifications Absolute Maximum Ratings at Ta = 25 C. Monolithic Digital IC 2-phase Brushless Fan Motor Driver. Ordering number : EN6202A

SiGe:C LOW NOISE AMPLIFIER FOR GPS

Helix Semiconductors HS200 Data Sheet

SiGe:C LOW NOISE AMPLIFIER FOR GPS

Description. Kingbright

MLX Features and Benefits Chopper stabilized amplifier stage Micropower consumption for batterypowered

SPEC NO: DSAE9407 REV NO: V.6B DATE: JAN/19/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:

System Reset with Delay Time Circuit Monolithic IC PST596~598 Series

Reversible motor driver

Designator Description Symbol Description CMOS output Output Configuration N-ch open drain output

TD62384APG,TD62384AFG TD62385APG,TD62385AFG

Reset Output. Active high Active low Active high Active low

DATA SHEET. Part No. AN48846B

DS21T09 Plug and Play SCSI Terminator

STBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications

Pd max2 * Mounted on a board. 800 mw Operating temperature Topr -40 to +85 C Storage temperature Tstg -55 to +150 C

UNISONIC TECHNOLOGIES CO., LTD LC1126 Preliminary LINEAR INTEGRATED CIRCUIT

Description. Kingbright

Chopper-Stabilized Precision Hall-Effect Latches

TTP226. Preliminary 8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION

HM9708 HM9708. Battery-Powered Equipment Motherboard USB Power Switch USB Device Power Switch Hot-Plug Power Supplies Battery-Charger Circuits DC+ VIN

TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER FEATURES PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER)

Tilt Sensor Switch. Item No. RBS330211T Description Photoelectric Version 13 Page 1 of 12 Publish Date Jun. 29, 2018

4-ch BTL Motor Driver for CD Players Monolithic IC MM1469

A mA CMOS LOW NOISE LOW-DROPOUT VOLTAGE REGULATOR. Application. Pin Description

NJU keys input key-scan IC GENERAL DESCRIPTION PACKAGE OUTLINE FEATURES BLOCK DIAGRAM PIN CONFIGURATION

LOW EMI PWM INTELLIGENT POWER HIGH SIDE SWITCH

MC74C Digit BCD Display Controller/Driver. General Description. Ordering Code: Connection Diagram. Features. Version 1.0

TCS40DPR. Digital Output Magnetic Sensor. Feature. Marking Pin Assignment (Top View) Function Table PA8

LA6584JA. Functions and Applications Single-phase full-wave driver for fan motor. Specitications

Chip LEDs with Bi-Color(Multi-Color)

Cosemitech. Automotive Product Group. FEATURES and FUNCTIONAL DIAGRAM

unit : mm Parameter Symbol Conditions Ratings Unit

30 VOLT QUAD-CHANNEL DIFFERENTIAL LINE DRIVER WITH OPEN DRAIN OUTPUTS

Parameter Symbol Conditions Ratings Unit

Pd max2 Mounted on a board * 1.85 W Operating temperature Topr -30 to +85 C Storage temperature Tstg -55 to +150 C

Preliminary TTP224N-FO8 TonTouch TM 1 KEY TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The TTP224N-FO8 TonTouch TM IC is capacitive sensing design specif

CE6260 Series. Low Dropout Voltage 500mA CMOS LDO Regulator INTRODUCTION FEATURES APPLICATIONS

CHENMKO ENTERPRISE CO.,LTD

4-channel driver and power controller

USB Charging Controller. Features. General Description. Applications. Order Information

LA6584M. Overview. Functions and Applications. Specitications. Monolithic Linear IC BTL Driver Single-Phase Full-Wave Fan Motor Driver

APX803/D 3-PIN MICROPROCESSOR RESET CIRCUIT. Description. Pin Assignments. Features. Applications APX803. ( Top View ) SOT23. ( Top View ) SOT23R GND

SPEC NO: DSAH3956 REV NO: V.7 DATE: NOV/26/2008 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:

PT7M Ultra Low Voltage Detectors

CMD Channel BTL Motor Driver for CD-ROM

Technical Data Sheet OPTO INTERRUPTER ITR

ACE803ND 3-Pin Microprocessor Reset Circuits

Tilt Sensor Switch. Item No. RBS Description Photoelectric Version 14 Page 1 of 9 Publish Date May. 31, 2018

Expert I/O 1000 Hardware User Manual

Reversible motor driver

TS04. 4-Channel Self Calibration Capacitive Touch Sensor SPECIFICATION V2.0

P8803 Quad Low-Side Driver IC

SPEC NO: DSAE5924 REV NO: V.9B DATE: DEC/03/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:

VBattery 7 VCC V DD IRLED IS31SE5001 SDA SCL INTB SDB. Figure 1 Typical Application Circuit

NJW4120. Lithium-ion Battery Charger Controller IC with Timer

Transcription:

Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart Features: Operate from 2.8V to 14V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. Output sinking capability up to 350mA for driving large load. Lower current change rate reduces the peak output voltages during switching. Available in rugged low profile SIP-4L,SIP-5L and SOT-25 packages. Built-in Frequency Generator. Built-in protection diode for reverse power supply fault. Prevent the fail situation during lock status or high temperature Built-in thermal lock protection and auto-restart function. General Description: WSH42FB is designed to integrate Hall sensor with two push-pull output drivers and frequency generator together on the same chip, it is suitable for single coil DC brushless motors. It includes a temperature compensated voltage regulator, a differential amplifier, a Hysteresis controller, complementary bi-direction drivers for sinking and driving large current load and an open-collector frequency generator capable of sinking 10mA current load. An on-chip protection diode is implemented to prevent reverse power fault. It also includes coil parts. You can eliminate all the external components for the function of FG and reverse protection diode. And built-in thermal lock protection and auto-restart function will automatically shutdown power at 110 C to prevent the coils be damaged during high temperature and auto-restart at 105 C. It can replace the function of lock protection and auto-restart at low cost. WSH42FB are rated for operation over temperature range from 20 C to 90 C and voltage ranges from 2.8V to 14V. Winson, 2005/9/23 1

Pin Descriptions: (SIP-4L) Name P/I/O Pin# Description Vcc P 1 Positive Power Supply DOB O 2 Output Pin #1 DO O 3 Output Pin #2 Vss P 4 Ground Pin Descriptions: SIP-5L Name P/I/O Pin# Description Vcc P 1 Positive Power Supply DOB O 2 Output Pin #1 DO O 3 Output Pin #2 FG O 4 Frequency Generator Vss P 5 Ground Pin Descriptions: (SOT-25) Name P/I/O Pin# Description Vcc P 1 Positive Power Supply Vss P 2 Ground FG O 3 Frequency Generator DO O 4 Output Pin #2 DOB O 5 Output Pin #1 Absolute Maximum Rating (at Ta=25 C) Supply Voltage Vcc -------------------------- 14V FG breakdown Voltage Vfg ------------------------- 14V Magnetic flux density B -------------------------- Unlimited Reverse Protection Voltage Vr -------------------------- 8V Output ON Current (continuous) Ic -------------------------- 350mA FG ON Current (continuous) If -------------------------- 10mA Operating Temperature Range Ta -------------------------- (-20 C to +90 C) Storage Temperature Range Ts -------------------------- (-65 C to +150 C) Package Power Dissipation Pd -------------------------- 350mw for SOT-25 500mw for SIP-4L 500mw for SIP-5L Winson, 2005/9/23 2

Electrical Characteristics: (T=+25 C, Vcc=2.8V to 14V) Characteristic Symbol Test Conditions Min Typ Max Units Supply Voltage Vcc 2.8 14 V Output Saturation Voltage FG Saturation Voltage Output Leakage Current Supply Current Vout(sat) Vdrive+Vsink Vcc=5V, Io=200mA 0.6 1.5 V Vfg(sat) Vcc=5V, If=5mA 0.1 0.4 V B > Bop Ileakage Vcc=5V, B < Brp <0.1 10 ua Isupply Vcc=5V, Io=200mA FG ON 27 35 ma Function Block: Magnetic Characteristics: Characteristics Symbol Quantity Operate Point Release Point Bop Brp Grade A Grade B Grade A Grade B Ta= -20 C to +80 C Min Typ. Max Unit 35 70 50 100 Gauss -70-35 -100-50 Gauss Hysteresis Window Bop-Brp 70 150 Gauss Winson, 2005/9/23 3

Ordering Information: SIP -4L: WSH42FB-XPA SIP -5L: WSH42FB-XPC SOT-25: WSH42FB-XPD Elec. Grade Elec. Grade SIP-4L & SIP-5L: 1: A Grade (70 Gauss) 2: B Grade (100 Gauss) SOT-25: 1: A Grade (70 Gauss) 2: B Grade (100 Gauss) Test Circuit: 1. SIP-4L Winson, 2005/9/23 4

2.SIP-5L 3. SOT-25 Winson, 2005/9/23 5

Package Information: 1. SIP-4L Winson, 2005/9/23 6

2. SIP-5L Winson, 2005/9/23 7

3. SOT-25 Winson, 2005/9/23 8

Application Circuit: 1. SIP-4L Figure 1. 2.SIP-5L Figure2. Winson, 2005/9/23 9

3-1. SOT-25 Figure 3. 3-2. SOT-25 Figure 4. Winson, 2005/9/23 10